Worth Partitioning Virtual Hard Drive?
Feb 8, 2012
I have 4 physical hard drives, 2 of them are 150GB and 2 of them are 1000GB. Both are mirrored at the pre O/S level in order to provide redundancy. On the 150GB mirror I installed the host operating system (Win Server 2008 R2 with Hyper-V) and the 1000GB mirror is just a Data drive. I've created my Virtual server in Hyper-V and allocated it 500GB from the 1000GB mirror. When I start up the virtual Server in order to install the o/s I will be asked whether to partition this "Virtual hard drive" i.e., have a C: drive for the virtual o/s and a d: drive for the virtual data. Of course they would be on the same physical disk anyway so should I bother partitioning the Virtual 500GB drive.
View 1 Replies
ADVERTISEMENT
Dec 25, 2009
How to partition my 250gb hard drive into 3 volumes on windows 7?
View 7 Replies
View Related
Jul 16, 2011
i have a question about partitioning a 2TB external hard drive that is formatted for 1.8 TB, i would like to partiotion it into (2) 500G partitions and whats ever is left as another partition, i dont remember how to go about doing it, if i think i remember correctly, i have to delete the partiotion first ( there is not data on it at the moment ) then partition the drive as stated above, i will be using partition home wizard 6.0, also, cant i just "resize the 1.8TB drive to what i want ?. or is it better to delete it and re partion the drive
View 1 Replies
View Related
Sep 22, 2011
i bought a laptop and it had one drive C(OS) with 450 gb. i want the c - drive to be partitioned further 2 drives(D and E). will i able to do that ,if so please send me steps or screen shots. i followed the below steps, i partitoned using Shrink volume in Disk management and i aplit the drive as
View 7 Replies
View Related
Dec 9, 2011
I just partitioned my external 3.0Tb hard drive using the device manager in Win 7. At first I had one partition of around 2.8Tb, I shrunk the existing partition to around 1.9Tb and then Windows created 3 partitions instead of 2. I ended up with 1 partition of 1.9Tb, 1 partition unallocated of around 100Gb and a 3rd partition of 746Gb unallocated. I was then able to create a simple volume on the 100Gb partition which left me with the 746Gb partition unallocated. When I try to format the 746Gb partition all the options are greyed out - I cannot create a simple volume or delete the partition. I also cannot extend my other 2 partitions to use the unallocated space. When I delete the 100Gb partition I can then extend the 1.9Tb partition and end up with a 2Tb partition and the remaining 746Gb unallocated. Is there any way to recover the 746Gb of unallocated space? Seems a waste to have a 3Tb drive that only has 2Tb of useable space.
View 6 Replies
View Related
May 12, 2012
i was wondering if it is possible to boot my computer from a vhd and add it to the boot menu. I do not want to dual boot, I am trying to use the vhd like a dual boot. I am running Windows 7 Ultimate x64.
View 5 Replies
View Related
Nov 20, 2009
Is it necessary to defrag a virtual hard drive?
View 4 Replies
View Related
Oct 10, 2010
I recently had much trouble with my computer and was reinstalling OS many times! XP and windows 7. When I was installing windows 7 there were 3 virtual drives one about 400 mb named windows reserved and 2 others each (300gb) the 3d one was backup. I formatted first 2 deleted partitions, made 1 partition formatted again and then installed windows. The 3d virtual hard drive backup disappeared with all my stuff. Now I just have Local disc C: which is 300 gb and nothing else. So I am missing 300gb virtual hard drive with my stuff, where did it go?
Computer is Inter (R) Core(TM) i3 CPU 530@2.93GHz
MSI Motherboard H55M-E33
Hard drive WDC WD6400AAKS-00E4A0 ATA Device
View 1 Replies
View Related
Nov 6, 2012
I'm trying to install 7 on a VHD using the command prompt. Now it does work but the problem is that it installs 7 Basic when I do it like this. I have Professional. Now I can use the Anytime Upgrade and use my product key to get Pro activated but because I'm in basic, 7 won't work on the VHD at boot. When it asks for my product key upon first time setup, it doesn't work since it's looking for a Basic product key.
Is there a way to get 7 Pro on the VHD through the CMD?
View 9 Replies
View Related
Jan 26, 2009
How to Create a Windows 7 VHD at Boot to Start with from Boot ?
View 0 Replies
View Related
Jan 1, 2012
i am using Windows 7 64-bit,320gb hard disk.i want to use ubuntu for programming nd create an unallocated partition.so,how can i do that?
View 3 Replies
View Related
Oct 31, 2012
Befor two days i purchased a Sony E series core i5 Laptop with 500GB HDD Space & Original windows 7 Home basic. I wantd 4 partitions , but they said only two partions can be done in Sony laptops then they divided the HDD in to two drives. Nw C drive shows 254GB & D drive shows 195 GB space respectively. bt my system seems slow nw. Can i divide my C drive in to two drives with 125 GB space each without losing my OS & installed softwares??Before dividing do i need to take a backup of C drive?? how can i split ma existing C drive in to two drives ? How can i take backup?
View 4 Replies
View Related
Sep 6, 2012
Got a new Windows 7 Enterprise 64 bit machine, found that it did not come with virtual PC. Downloaded the critical patch Windows6.1-KB958559-x64-RefreshPkg.msu and installed it. Windows Virtual PC shows up in my Start Menu. Good so far. I go through the steps to create a virtual machine and use the option to 'use an existing vhd file' and when I click 'Create' I get the above pop-up message "Cannot attach the virtual hard disk to the virtual machine. Check values and try again". A factual message but completely useless as with all error messages from Microsoft. I have tried the following:1. When I attach that vhd using Disk Management, it mounts in drive E:, I can see the files and browse the dirs in E:. In the Disk Management View, the drive shows up as 127 Gigs but 107 is unallocated space. The physical size of the vhd is only 25 Gigs2. Others in my company were able to create the virtual machine with the same vhd, checked the byte size and timing, so nothing is wrong with the vhd file itself.
3. Tried to create after shutting down all virus protection including the Micorsoft antimalware protection service. No luck4. Tried Vhd resize to resize the vhd to a smaller size (since it showed up in disk management as 127 Gigs, I thought maybe it was that size), but VHDResizer could not open the input file, gave an errors "Can only load fixed or dynamic drives"
View 3 Replies
View Related
Oct 19, 2011
My disk crashed and had to reload everything, I took it to Toshiba service center. Before the crush my hard disk was just one big physical disk now I have: C: physical 150.84 GB(boot, page file, crush dump, primary partition)If so can you please tell me how to do it, never done this before, partitioning, and I don't want to make a mess out of it.
View 8 Replies
View Related
Jul 22, 2009
I've got a 320GB drive on a Vista Premium Home notebook.
Few user files are actually on the notebook, rather the files are on my desktop, and are processed via the network, or temporarily copied to the notebook.
Currently, C drive is 285.04GB with 246GB free.
HP's recovery partition is 13.05GB, with 2.4GB free.
I am going to shrink the C drive, so I can add a separate partition for my own files, this partition could be shared with Windows 7.
How much space should I leave for Windows 7 Home?
I would end up with the following partitions:
C: For Vista
H: For Howard's files
W: For Windows 7 Home
Unallocated: Likely 32GB, in case I wish to add Ubuntu Linux.
D: Recovery partition for HP. I use image backup so this is not really useful.
View 9 Replies
View Related
Jun 8, 2012
I have two opreating system installed but in drive D win xp was not working therefore i tried to installed the win xp in drive D and i have already installed a win 7 in Drive C and i encrypt the drive E, F with Bitlocker ..when i install the win xp then win 7 was not reachable and not work correctly then i again installed the win 7 in drive C and want to partition the drive E,F then there was a problem created while in partitioning because i forgot the un encryption of these drives.
View 1 Replies
View Related
Aug 1, 2009
There was a time when I had Windows 7 and absolutely adored it.
For certain reasons I tried to go back but fail epically (yes, I'm a teenager!) and now I have two active drive partitions and it's still looking for Windows Seven's bootmgr.w/eand now I need either one of four questions answers so I can get back on my new computer. [(BTW, I am starting to hate the way I need to tweak things.)]
The questions are:If I install windows seven on my usb flash drive (which I tweaked to make the computer look at it like a USBHDD,) will it wipe out the OS on my grandpa's computer? How can I make BIOS look-up and process boot.ini instead? How can I run the Windows Vista install off my FlashHD [as I call it. :P]Is it even possible? Would it work better or, once again, is it possible to install Vista on my flash drive and use it to run on my grandpa's computer. My computer is an Acer AspireOne [I will deservingly accept flaming due to my poorness and poor sense of choice].
View 9 Replies
View Related
Dec 18, 2009
I am looking to use my 1TB seagate SATA II drive for my Windows 7 installation, and was wondering how I should go about partitioning it and how large each partition should be or what I sould put on each partition.
My system will be used for the following:
Computer Games that take up a lot of space (World In Conflict, Empire Total War, Battlefield 2, Call of Duty, etc.)
Music
Video files/ recordings (I have a Hauppauge tv card)
Some Photos
Basic apps like office
Data files
Which of the above items should I put on the OS partition, and which should get their own partitions? How large should the OS partition be compared to the other partitions? Seperate partition for games?
Having one giant drive might be nice to try, but then I would have no where to put my excess video files if I ever needed to reformat. The 1TB drive accomodates whatever video files I can't store on my 2 smaller drives and currently has 120 GB of video on it.
In addition to my 1TB drive, I also have 2 more internal drives, a 250GB Maxtor ATA which is filled with video files and a 200GB WD SATA that I use for my TV card and storing the recordings I make until I have a chance to edit them or move them to a differet drive.
I have a seperate 250GB external drive for backing up data files and music, so the backup issue is taken care of.
View 3 Replies
View Related
May 28, 2009
I got a question for you maybe you can answer for me. I have a single 1terabyte sata drive with windows 7 on it. I used to have Windows xp pro on it but i upload Windows 7, i just delete the "old windows" that Windows 7 left me. Now i have accumulated alot of files in my documents file which i use for video purposes which take up about 530 gigs.
i can't wipe my hard drive clean to install the new update rc which i recieved as a beta tester. Is there any way to partition the drive only where Windows 7 is at leaving my 530 gigs in a seperate partition so that i can install dual os's. The two os's will be Windows 7 rc and Xp Pro. the only reason i made the switch is because i built my new computer with 4 gigs of memory running core 7 processor but xp only sees 3 gigs.
View 8 Replies
View Related
Jan 22, 2012
I have a 1tb HD and I want to partition it to install another operating system. There is no "unallocated space". How do I go about making my partition?
View 8 Replies
View Related
Jan 23, 2013
I created a partition and installed XP on it and the game installs correctly (installation wouldn't even start on Win7) and it runs. However, the drivers I got when I bought the laptop are only compatible with Win7 (video drivers, wifi/lan drivers, the audio driver works fine on XP however).Because of this driver problem, I have no graphics driver to run the game (I know it works because I can start the game and hear the audio). I also couldn't connect to the internet to find and update drivers on that specific machine.
So I searched for them on another computer but after hours of searching, downloading and transferring the files to my Acer, failed to find any compatible with XP.The Acer website which I downloaded these drivers from mentions they work on XP in the description but they wouldn't install, giving the error 'not support on this operating system' or similar.FYI the hardware for the drivers I needed were: - Lite-on Wireless LAN 3rd WiFi BGN Atheros HB97 (OR Broadcom LAN BCM57780 for ethernet connection)- Intel VGA Chip UMAHas
View 3 Replies
View Related
Nov 14, 2012
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies
View Related
May 19, 2011
I have installed a vitual xp drive on my windows 7- how do i use microsoft office (exel) from virtual drive
View 2 Replies
View Related
Nov 17, 2008
How to Create and Attach a Virtual Hard Disk in Windows 7 ?
View 0 Replies
View Related
Nov 24, 2009
How to Unattach and Delete a Virtual Hard Disk in Windows 7 ?
View 0 Replies
View Related
Oct 4, 2011
if there is a way to open the Command Prompt during Windows XP installation (booted from CD) and find a way to attach a Virtual Hard Disk so you could install XP on it (just like with Windows 7 and 8)?
View 5 Replies
View Related
Nov 6, 2012
My Windows 7 Pro x64 has twice had to be completely reinstalled after serious faults.Each time before the crash Virtual XP had been installed and had created its own VHD.Both VHDs have been preserved, but the Virtual machine(s) have apparently isappeared. On each Windows 7 reinstallation, the important folders from the previous version were saved in a Windows.Old folder. I now want to reinstall VirtualXP and choose one of the old VHDs rather than create yet another one. What is the easiest and fastest way to do that?
View 3 Replies
View Related
Oct 25, 2011
So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies
View Related
May 7, 2012
I'm using windows 7 32bit at the min but i have a legit copy of 64bit and wondered if it is worth while upgrading.
View 4 Replies
View Related
Mar 5, 2012
Is there any such thing as truly free software? Do you all know if the following "free" programs come with spyware or add-ons which can slow down my computer: CCleaner (for clearing Temp files and websurfing Cache) ImgBurn (for burning DVDs and Image files) BurnAwareFree
View 9 Replies
View Related
Nov 14, 2009
I am a regular IT user and I get problems with drivers once a month which take me a whole night sometimes to manually solve. Is driver detective worth getting?
View 6 Replies
View Related
