Reinstall VirtualXP To Use Existing Virtual Hard Drives?
Nov 6, 2012
My Windows 7 Pro x64 has twice had to be completely reinstalled after serious faults.Each time before the crash Virtual XP had been installed and had created its own VHD.Both VHDs have been preserved, but the Virtual machine(s) have apparently isappeared. On each Windows 7 reinstallation, the important folders from the previous version were saved in a Windows.Old folder. I now want to reinstall VirtualXP and choose one of the old VHDs rather than create yet another one. What is the easiest and fastest way to do that?
View 3 Replies
ADVERTISEMENT
Dec 26, 2011
I have a system with three hard disks on them. The Primary one has the OS and some programs. Secondary one has programs and data (like pictures and such). Third one has data and backup data.I recently formatted the Primary drive which had Windows Vista on it, and did a full install of Windows 7 Pro.After the install, the Secondary and Tertiary disks showed up in disk management; I just had to assign drive letters to them.The issue: I can see the existing Secondary and Tertiary disks in windows explorer. I can go into properties on each hard disk and see that there is used disk space on them (so the data is still there). But Windows Explorer shows both hard disks as empty. I can't actually see any of the data. What can I do to fix this...obviously without formatting the disks and losing the existing data on there? Is this perhaps a driver issue?
View 5 Replies
View Related
Apr 30, 2012
I am currently running WinXP Pro SP3. If I was to install Win7 on a separate partition, would I be able to use Win Virtual PC to control the existing XP partition or would I need to re-install all the XP software onto the virtual machine?
View 9 Replies
View Related
Jul 12, 2012
I have just loaded win7 pro 64 bit onto a 2nd hdd, preserving xp on another hdd. I have installed virtual pc and xp mode in win7. For all you OS geeks, how do I point my virtual pc xp mode to the installed xp on another hdd, so I don't have to reinstall any of my existing xp software?
View 2 Replies
View Related
May 27, 2011
i am re-installing WIN-7 on a previously installed WIN-7 (the same OS). But the prob is that, i had installed it with XP already loaded. Now that i want to re install WIN-7,
1. will it affect XP
2.Should i reinstall XP??
3. I want XP to be as it is..
View 3 Replies
View Related
Dec 24, 2012
I just got a new MB/CPU and want to do a clean install of my OS. Currently I have two partitions on my HD, one for the OS and one for all my data. Can I just format the OS partition and do a clean install on that partition of the new OS? I just don't want to lose all my data files. I have most backed up, but would take the entire day to backup the rest probably.
View 2 Replies
View Related
Feb 21, 2013
I've been having some issues with a computer that belongs to CEO of the company I work for. It was built by his son in law and that son in law doesn't really have time to work on it anymore so fortunately "end of sarcasm" that responsibility falls on me.Computer was running great until about two or three months ago where after shutting it down for the night and turning it back on in the morning would cause the computer to reboot three times after going through POST and during 4th time he was able to boot into OS (WIN7 64bit). I updated his bios and that seemed to fix the problem, BUT the computer was set in a Raid 1, but for some reason it is no longer set up that way. I see both HDD as separate HDD in "My Computer" C: & D:, both are 600GB with about 400GB of space free. How can I return them into their raid 1 configuration? MOBO is GA-X58A-UD7 Rev 2, Intel Core i7 970 cpu with 12GB DDR3 RAM Total. He has about $10,000 worth of programs on it (Electrical & Mechanical Engineer) and it would take me weeks if I had to start from scratch.
View 1 Replies
View Related
Oct 27, 2010
i cant install or reinstall existing java-windows message 1723 error
View 2 Replies
View Related
Sep 6, 2012
Got a new Windows 7 Enterprise 64 bit machine, found that it did not come with virtual PC. Downloaded the critical patch Windows6.1-KB958559-x64-RefreshPkg.msu and installed it. Windows Virtual PC shows up in my Start Menu. Good so far. I go through the steps to create a virtual machine and use the option to 'use an existing vhd file' and when I click 'Create' I get the above pop-up message "Cannot attach the virtual hard disk to the virtual machine. Check values and try again". A factual message but completely useless as with all error messages from Microsoft. I have tried the following:1. When I attach that vhd using Disk Management, it mounts in drive E:, I can see the files and browse the dirs in E:. In the Disk Management View, the drive shows up as 127 Gigs but 107 is unallocated space. The physical size of the vhd is only 25 Gigs2. Others in my company were able to create the virtual machine with the same vhd, checked the byte size and timing, so nothing is wrong with the vhd file itself.
3. Tried to create after shutting down all virus protection including the Micorsoft antimalware protection service. No luck4. Tried Vhd resize to resize the vhd to a smaller size (since it showed up in disk management as 127 Gigs, I thought maybe it was that size), but VHDResizer could not open the input file, gave an errors "Can only load fixed or dynamic drives"
View 3 Replies
View Related
May 12, 2009
can any body tell me what are you using for creating virtual drives.
I tried to use DAEMON tools and alcohol with no luck..
View 4 Replies
View Related
Dec 1, 2009
can daemon and alcohol work on windows 7 irrespective of 32 bit or 64 bit processors?
View 1 Replies
View Related
Aug 11, 2011
I'm running Windows7 Enterprise, and I needed to install a virtual XP machine to run a very old compiler. I need to add an entry to the path so that I can access a folder structure in the command prompt. All of the default paths begin with %SystemRoot%, which I've found is the virtual C:WINDOWS directory. So:
1) Is there a way to add a path to just the virtual C: directory (not C:WINDOWS)?
2) When I add additional paths to C:WINDOWS using the %SystemRoot% syntax, they don't seem to be acknowledged in command prompt.
View 1 Replies
View Related
Sep 23, 2011
I was wondering if there was a program to mount .img's in a virtual drive in Windows 7. There were several in XP that I used but I have learned there are a lot of compatibility issues in Windows 7. Is there one that any of you use?
View 4 Replies
View Related
Jan 13, 2009
As you can see the drives list is blank, and I cannot change the location and size of pagefile!
Does anyone have the same problem or have some tips to solve this?
View 9 Replies
View Related
Jan 28, 2013
I can not access any of these storage devices or virtual drives.The devices work perfectly on other computers.I am sure that there is a problem with permissions.I tried everything from other forums, from cmd commands to local protocol changes,and when i tried to change permision of the drives in My Computer i get acces denied.I am on the only user account which is administrator too.
View 2 Replies
View Related
Dec 28, 2012
I am planning to replace my motherboard and memory on my Win 7 Home premium 64b. I've been updating MBs for 25 years and now I am getting conflicting answers regarding booting existing hard drive on new MB. My present Win 7 installation was installed on my present MB. Before I have always been able to use an existing hard drive and OS on a new MB.Now when I asked Gigabyte if a reinstall would be required they said no, but the registry may be full of unneeded drivers etc which would affect performance. This seems a solvable issue using registry cleaners and editors.But I am also getting opinions that Win 7 will not boot up on a new MB and reinstall OS would be required. Considering the number of programs, some on disks others from downloads. activation keys etc, this is a major problem.
View 9 Replies
View Related
May 26, 2012
A week ago I had to reinstall Windows 7 on a second PC (PC2) which now has an SSD. However, the original disk (a 500GB Seagate) has been used to reorganise partitions of which there are now eight. Three of these I can access from PC1 with no problem. However, the last four plus a 1TB drive there is no way I can access them - I can look at them but there's no way I can copy any files or folders to them.I've checked the drive permissions via the Security tab and set everything I can to Full Control. However, out of the five there is one Name I cannot change and that is CREATOR OWNER which has permissions set to Special and which so far I've found no way of changing. In relation to the Names they are a little different to mine. All five are the same except that PC2 has CREATOR OWNER. I have Authenticated Users that PC2 doesn't have; none of PC2's drives have an Authenticated Users entry. Should it?
To clarify the Names we both have they are listed below:
PC1
Administrators (Username/Administrator)
Authenticated Users
Everyone
SYSTEM
[code].....
I've just checked a third PC we have upstairs and that is different again most drives ONLY having Everyone with only one drive having the Names above under PC1 but NOT Everyone. So I suppose that makes me one confused chick. What the hell gives with the Names Groups? What should I have and what should I NOT have or not need?
View 1 Replies
View Related
Jan 4, 2013
External backup for 2 Windows 7 home computers.Prices are currently at a premium for a 2T 2 1/2" USB 3x external backup drive. I will retire the XP machine soon that is being replaced by the new Windows 7 machine. The XP machine has 2 drives--one of which is slower than molasses and you can hear the thing churning away when nothing should be going on (indexing off).I've never had much luck with diagnostic software--in particular PC Doctor when it was shipped with Lenovo systems.Is there, in particular, hard drive diagnostic software that really can diagnose a problematic drive?
View 2 Replies
View Related
Jan 26, 2012
I have a netbook ASUS Eee PC 1005PXD.After only two days of use, i get a black screen at the beginning: "Reboot and select proper boot device or insert boot media in selected boot device and press a key".Pressing F9 on boot doesn't work and i'm still getting the black screen.F2 is working, then in Boot Settings, i set Removable Device as 1st Boot Device. (and there is no Boot Booster option to disable).Then, using the Windows 7 USB/DVD Download Tool, i create a Windows 7 bootable USB, in order to use the System Recovery.When i get to the System Recovery Options screen, no Operating System appear in the list. (It say to load drivers in this case, but i have no idea which drivers and how to load them).
Then i press next without choosing OS, but pressing Startup Repair after that didn't help.Also using the Command Prompt didn't help (bootrec /fixmbr, bootrec /fixboot, bootrec /scanos, bootrec /rebuildbcd) The two last commands (/scanos and /rebuildbcd) give: "Number of windows installed: 0".Then i decided to reformat and reinstall Windows 7 (my netbook is new):i boot using the Windows 7 bootable USB i created before, then on first screen i press on "Install now".When i get to screen "Which type of installation do you want", i choose Custom.Then i get to screen "Where do you want to install Windows?" but the list is empty, and at the bottom, it is written "No drives were found. Click Load Driver to provide a mass storage driver for installation".
View 3 Replies
View Related
Oct 8, 2011
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies
View Related
Jan 2, 2012
I use an WD external hard drive (1TB) for additional storage and it was working fine with no issues. The small USB connector broke off the board yesterday and I purchased a new enclosure and installed it. Now my computer does not recognize it as a storage device. I have all the data still on the HD and really do not want to loose it. I tried adding a letter for the drive, but it does not show up to change the letter of the drive.
View 3 Replies
View Related
Oct 16, 2011
I recently did a complete reinstall of Windows 7 64-bit on my desktop computer and now I can't access shared drives on my wife's Windows 7 computer (home ethernet network). I was able to install and use the shared printer attached to her computer. I am able to add her shared drives to my Windows Explorer as mapped network drives, but if I click on one an error box pops up: "J: is not accessible. Access is denied."
Her computer and all of her drives show up in the Network section of Windows Explorer, but if I click on one, I get a Network Error popup saying "Windows cannot access \Wife-pcc. You do not have permission to access \Wife-pcc. Contact your network administrator to request access." I am able to control her desktop and transfer files using UltraVNC...that's actually the only way I can transfer files at the moment.
If, from her computer, I right-click her C: drive, select Properties -> Sharing, it shows the drive is shared. If I click the Advanced Sharing button, and then click the Permissions button, under "Group or user names" it shows "Everyone", and shows the permissions as Full Control, Change, and Read. What else do I need to do so that I can access her drives as Mapped Network Drives? I was able to do so prior to reinstalling Windows 7 on my computer, and nothing has changed on her computer.
View 7 Replies
View Related
May 12, 2012
i was wondering if it is possible to boot my computer from a vhd and add it to the boot menu. I do not want to dual boot, I am trying to use the vhd like a dual boot. I am running Windows 7 Ultimate x64.
View 5 Replies
View Related
Nov 20, 2009
Is it necessary to defrag a virtual hard drive?
View 4 Replies
View Related
Oct 4, 2011
I have searched google for ours trying to find a fix for this but to no avail.CD drive and virtual drives dont appear in my computer and whenever i put in a dvd nothing comes up.it appears in device manager and disc management however so i know there is nothing physically wrong with the optical drive. Under disc manager i can see the details about the dvd such as dvd name, size etc.i tried changing drive letter and path but unfortunately that doesnt fix it. the letter "applies" for a second then disappears again.
View 5 Replies
View Related
Oct 10, 2010
I recently had much trouble with my computer and was reinstalling OS many times! XP and windows 7. When I was installing windows 7 there were 3 virtual drives one about 400 mb named windows reserved and 2 others each (300gb) the 3d one was backup. I formatted first 2 deleted partitions, made 1 partition formatted again and then installed windows. The 3d virtual hard drive backup disappeared with all my stuff. Now I just have Local disc C: which is 300 gb and nothing else. So I am missing 300gb virtual hard drive with my stuff, where did it go?
Computer is Inter (R) Core(TM) i3 CPU 530@2.93GHz
MSI Motherboard H55M-E33
Hard drive WDC WD6400AAKS-00E4A0 ATA Device
View 1 Replies
View Related
Nov 17, 2008
How to Create and Attach a Virtual Hard Disk in Windows 7 ?
View 0 Replies
View Related
Nov 24, 2009
How to Unattach and Delete a Virtual Hard Disk in Windows 7 ?
View 0 Replies
View Related
Oct 4, 2011
if there is a way to open the Command Prompt during Windows XP installation (booted from CD) and find a way to attach a Virtual Hard Disk so you could install XP on it (just like with Windows 7 and 8)?
View 5 Replies
View Related
Feb 8, 2012
I have 4 physical hard drives, 2 of them are 150GB and 2 of them are 1000GB. Both are mirrored at the pre O/S level in order to provide redundancy. On the 150GB mirror I installed the host operating system (Win Server 2008 R2 with Hyper-V) and the 1000GB mirror is just a Data drive. I've created my Virtual server in Hyper-V and allocated it 500GB from the 1000GB mirror. When I start up the virtual Server in order to install the o/s I will be asked whether to partition this "Virtual hard drive" i.e., have a C: drive for the virtual o/s and a d: drive for the virtual data. Of course they would be on the same physical disk anyway so should I bother partitioning the Virtual 500GB drive.
View 1 Replies
View Related
Nov 6, 2012
I'm trying to install 7 on a VHD using the command prompt. Now it does work but the problem is that it installs 7 Basic when I do it like this. I have Professional. Now I can use the Anytime Upgrade and use my product key to get Pro activated but because I'm in basic, 7 won't work on the VHD at boot. When it asks for my product key upon first time setup, it doesn't work since it's looking for a Basic product key.
Is there a way to get 7 Pro on the VHD through the CMD?
View 9 Replies
View Related
