Defrag A Virtual Hard Drive
Nov 20, 2009Is it necessary to defrag a virtual hard drive?
View 4 RepliesIs it necessary to defrag a virtual hard drive?
View 4 Repliesi was wondering if it is possible to boot my computer from a vhd and add it to the boot menu. I do not want to dual boot, I am trying to use the vhd like a dual boot. I am running Windows 7 Ultimate x64.
View 5 Replies View RelatedI recently had much trouble with my computer and was reinstalling OS many times! XP and windows 7. When I was installing windows 7 there were 3 virtual drives one about 400 mb named windows reserved and 2 others each (300gb) the 3d one was backup. I formatted first 2 deleted partitions, made 1 partition formatted again and then installed windows. The 3d virtual hard drive backup disappeared with all my stuff. Now I just have Local disc C: which is 300 gb and nothing else. So I am missing 300gb virtual hard drive with my stuff, where did it go?
Computer is Inter (R) Core(TM) i3 CPU 530@2.93GHz
MSI Motherboard H55M-E33
Hard drive WDC WD6400AAKS-00E4A0 ATA Device
I have 4 physical hard drives, 2 of them are 150GB and 2 of them are 1000GB. Both are mirrored at the pre O/S level in order to provide redundancy. On the 150GB mirror I installed the host operating system (Win Server 2008 R2 with Hyper-V) and the 1000GB mirror is just a Data drive. I've created my Virtual server in Hyper-V and allocated it 500GB from the 1000GB mirror. When I start up the virtual Server in order to install the o/s I will be asked whether to partition this "Virtual hard drive" i.e., have a C: drive for the virtual o/s and a d: drive for the virtual data. Of course they would be on the same physical disk anyway so should I bother partitioning the Virtual 500GB drive.
View 1 Replies View RelatedI'm trying to install 7 on a VHD using the command prompt. Now it does work but the problem is that it installs 7 Basic when I do it like this. I have Professional. Now I can use the Anytime Upgrade and use my product key to get Pro activated but because I'm in basic, 7 won't work on the VHD at boot. When it asks for my product key upon first time setup, it doesn't work since it's looking for a Basic product key.
Is there a way to get 7 Pro on the VHD through the CMD?
How to Create a Windows 7 VHD at Boot to Start with from Boot ?
View 0 Replies View RelatedAuslogic's Disk Defrag is a free utility. how it compares to Win 7's built in defrag utility? Is it worth downloading over what's already there?
View 9 Replies View Relatedknow how to defrag an ssd drive?
View 7 Replies View RelatedGot a new Windows 7 Enterprise 64 bit machine, found that it did not come with virtual PC. Downloaded the critical patch Windows6.1-KB958559-x64-RefreshPkg.msu and installed it. Windows Virtual PC shows up in my Start Menu. Good so far. I go through the steps to create a virtual machine and use the option to 'use an existing vhd file' and when I click 'Create' I get the above pop-up message "Cannot attach the virtual hard disk to the virtual machine. Check values and try again". A factual message but completely useless as with all error messages from Microsoft. I have tried the following:1. When I attach that vhd using Disk Management, it mounts in drive E:, I can see the files and browse the dirs in E:. In the Disk Management View, the drive shows up as 127 Gigs but 107 is unallocated space. The physical size of the vhd is only 25 Gigs2. Others in my company were able to create the virtual machine with the same vhd, checked the byte size and timing, so nothing is wrong with the vhd file itself.
3. Tried to create after shutting down all virus protection including the Micorsoft antimalware protection service. No luck4. Tried Vhd resize to resize the vhd to a smaller size (since it showed up in disk management as 127 Gigs, I thought maybe it was that size), but VHDResizer could not open the input file, gave an errors "Can only load fixed or dynamic drives"
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies View RelatedI have installed a vitual xp drive on my windows 7- how do i use microsoft office (exel) from virtual drive
View 2 Replies View RelatedHow to Create and Attach a Virtual Hard Disk in Windows 7 ?
View 0 Replies View RelatedHow to Unattach and Delete a Virtual Hard Disk in Windows 7 ?
View 0 Replies View Relatedif there is a way to open the Command Prompt during Windows XP installation (booted from CD) and find a way to attach a Virtual Hard Disk so you could install XP on it (just like with Windows 7 and 8)?
View 5 Replies View RelatedMy Windows 7 Pro x64 has twice had to be completely reinstalled after serious faults.Each time before the crash Virtual XP had been installed and had created its own VHD.Both VHDs have been preserved, but the Virtual machine(s) have apparently isappeared. On each Windows 7 reinstallation, the important folders from the previous version were saved in a Windows.Old folder. I now want to reinstall VirtualXP and choose one of the old VHDs rather than create yet another one. What is the easiest and fastest way to do that?
View 3 Replies View RelatedSo, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies View RelatedI downloaded Super Elite Sniper game (5.13gb) and I do not have access to a dvd with enough space to burn it onto a disk. Will I be able to create a "disk" by using a virtual dvd/cd drive and then "burn" the disk onto my hard drive.
View 1 Replies View RelatedI have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies View RelatedI have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies View RelatedMe and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies View RelatedI have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies View RelatedI have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
View 1 Replies View RelatedWhat I've done:
1. Boot from Windows 7 DVD
2. Shift-F10 to command prompt
3. created the vdisk
4. selected the vdisk
5. attached the vdisk
6. exit back to install screens
When I select my vhd I get the normal message saying it cannot install but when I click the Next button, I get an error saying there isn't enough free space on the selected device but it shows the whole drive as free space. It won't let me continue with the install.I've tried creating the partition from diskpart and it still doesn't work.
I upgraded from Vista to Windows 7 and wasn't able to run MajicDisk. The program would install and give me an error. Can anyone point me in the right direction? Is there any free ware virtual drives that anyone can recommend that will work with Windows 7? If you know of software please help me out.
View 2 Replies View RelatedI have windows 7 installed on HP elite with Phenom Quad Core processor. This was a clean install and 7 runs flawlessly, including all DVD drive functions. However, when I open the Virtual XP environment and try to use my dvd drive I get a "corrupted path or file" error. I noticed that the drive letter of the DVD in Virtual XP is "D" - which is the same letter as what appears to be the restore partition in Vista, while the DVD drive letter in Vista is "E".
I tried changing the drive letter in XP but that did not work. My DVD drive shows up in devices, there are no apparent conflicts and the troubleshooter determines that the device is working properly. As most of my XP software I need to install is on disc, I have no way of getting my software into XP, hoping someone else has encountered this problem, please, I am not a computer geek so go easy on me. I know just about enough to get around and get myself in trouble.
Also it has gotten corrupted in some way and when I try to open it it says "could not enable integration features". When I press continue it then says "The operation failed. The virtual machine is not running". Is there any way I can recover my files or am I to remain for ever a victim of this software?
View 2 Replies View RelatedReadyboost is NOT virtual RAM from a flash drive.Readyboost is NOT RAM at all.Readyboost is a cache used by your hard drive.Basically it copies stuff you normally use to the speedy Readyboost cache, where it can be used faster.Readyboost give an all round performance boost, and is more noticeable with older, slower hard drives. The more you have, and the faster it is means more boost.Readyboost yields the most with small file browsing, boot up time, windows operations, and some programs you use.I have 20GB of readyboost, I got that instead of upgrading my HDD to a SSD or hybrid.
View 6 Replies View RelatedI'm not able to burn the image to a DVD because, well, I don't have a DVD burner. I figured I'd mount it to a virtual drive and install it to another partition that way, but it's been so long since I've used virtual drive software I'm not sure how I'd do it. Once I mount the image to a virtual drive (I will be using VirtualCloneDrive5), what do I do next? Secondly, my computer is an HP and all the recovery data (drivers) is on its own partition on the harddrive already. This means I can't access the drivers, though I can just download them off HP's site. My question is, though, will at any point during the Windows 7 installation will I be prompted to install any drivers? I don't want to be installing and then have it ask for drivers that I haven't burned to a disc yet.
View 9 Replies View RelatedHow to delete virtual drive from computer
View 4 Replies View RelatedI installed MagicDisk awhile back because I was trying to mount a copy of memtest. Anyways, I ended up uninstalling MagicDisk, but the virtual cd-rom drive it created stayed behind.
So, I went to device manager and uninstalled it, and thought I had solved the problem.
However, every time my computer either boots or even wakes up from sleep mode, windows automatically reinstalls the drivers and re-enables the virtual cd-rom drive.
Does anyone know where to find the registry files I have to delete to tell my windows installation that I don't want that drive anymore?
I am running virtual XP mode in WIn 7. In XP I am able to map a drive G: that is from Win 7 mapped drive (Microsoft Terminal Services). Great, in Explorer you can see the mapped drive.I need to set up an ODBC connection to a database on that drive. No problem I thought.When I need to select a drive in the Select Database window, I cannot see that drive, only A:, C:, D: , the default drives, G: is not shown
View 2 Replies View Related