After Reinstall Cannot Access Shared Drives On PC2
May 26, 2012
A week ago I had to reinstall Windows 7 on a second PC (PC2) which now has an SSD. However, the original disk (a 500GB Seagate) has been used to reorganise partitions of which there are now eight. Three of these I can access from PC1 with no problem. However, the last four plus a 1TB drive there is no way I can access them - I can look at them but there's no way I can copy any files or folders to them.I've checked the drive permissions via the Security tab and set everything I can to Full Control. However, out of the five there is one Name I cannot change and that is CREATOR OWNER which has permissions set to Special and which so far I've found no way of changing. In relation to the Names they are a little different to mine. All five are the same except that PC2 has CREATOR OWNER. I have Authenticated Users that PC2 doesn't have; none of PC2's drives have an Authenticated Users entry. Should it?
To clarify the Names we both have they are listed below:
PC1
Administrators (Username/Administrator)
Authenticated Users
Everyone
SYSTEM
[code].....
I've just checked a third PC we have upstairs and that is different again most drives ONLY having Everyone with only one drive having the Names above under PC1 but NOT Everyone. So I suppose that makes me one confused chick. What the hell gives with the Names Groups? What should I have and what should I NOT have or not need?
I haven't really had any issues since I first installed Windows 7 and now I'm trying to access a shared drive over a network and I'm getting this annoying error message that I cannot access a shared drive over the network.
I decided to reinstall Windows 7 and before that I never had this issue.
I have not installed any third party software, I've enabled network discovery and right now I cannot access any shared folders or drives, at all, though it can see it.
I'm getting that stupid error message: "<Network drive> is not accessible. You might not have permission to use this network resource. Contact the administrator of the server to find out if you have access permissions. Access is denied."
XP SP3 is used. The Simple File Sharing is not enable.Ping from Windows 7 to XP goes through.The same log-on user name and password are used for XP and Windows 7.XP machine is visible from Windows 7.Error message is "Unknown user name or bad password. The same message when attempting to access from another Windows 7.Initially it was working but after an hour or so, it quits. I rebooted the router, XP machine and Windows 7 machine but the situation remains unchanged. There is no problem networking between the two W7s.
I have an intermittent problem with networking my desktop machine to my laptop. Sometimes after I hibernate my laptop and then wake it up, I am unable to access my shared drives on my laptop from my desktop. I am always able to go the other way (access shared drives on desktop from laptop. When it does this, even reboots of both machines don't help.
I just asked Windows 7 to diagnose and I get this. Usually after "messing" with the network settings, log offs, reboots, who knows, it usually starts working both ways again until some later hibernation restart of laptop. I wish I could pinpoint some common things that cause it but I just can't figure it out. Any ideas?
I recently did a complete reinstall of Windows 7 64-bit on my desktop computer and now I can't access shared drives on my wife's Windows 7 computer (home ethernet network). I was able to install and use the shared printer attached to her computer. I am able to add her shared drives to my Windows Explorer as mapped network drives, but if I click on one an error box pops up: "J: is not accessible. Access is denied."
Her computer and all of her drives show up in the Network section of Windows Explorer, but if I click on one, I get a Network Error popup saying "Windows cannot access \Wife-pcc. You do not have permission to access \Wife-pcc. Contact your network administrator to request access." I am able to control her desktop and transfer files using UltraVNC...that's actually the only way I can transfer files at the moment.
If, from her computer, I right-click her C: drive, select Properties -> Sharing, it shows the drive is shared. If I click the Advanced Sharing button, and then click the Permissions button, under "Group or user names" it shows "Everyone", and shows the permissions as Full Control, Change, and Read. What else do I need to do so that I can access her drives as Mapped Network Drives? I was able to do so prior to reinstalling Windows 7 on my computer, and nothing has changed on her computer.
ok i have a home network set up on 2 pcs with win 7 64bit
i have set up shared drives on both pcs ,, i have set the permisions on the shared drives so that everyone can do whatever they want change files delete files ect
so i expect to be able from one pc to cut files and paste to the other but i cant ,,, i cant even copy from one pc to the other unless i do it from the pc that is going to have the file added
Ok has anyone experienced this, I have 3 drives shared from windows 7 RTM, to windows 7 7100. everytrhing works ok ubtil I try to move, copy a file from one system to another. This makes my windows 7 rtm version loose it's network connection completely, I have to run the diagnose wizard and then it's ok. I can see and browser the folders for a week no problems.
As soon as I try to copy or move a file over the network I kills my network connection only on the windows 7 rtm system. All the other computers in the house are ok. I have one system running linux and 4 others running the windows 7 7100 build that can share and get online with out any issue's. Please let me know if you have experienced this.
I'm running a Windows7 Home Premium 32bit on a desktop and want to share its drives with the network. The desktop is LAN connected to the Wifi router and has no issues. If I LAN connect to the router with a laptop, I can access the desktop shared drives but I want to be able to access them via Wifi on a laptop. The Laptops have no problems accessing internet through wifi but will not see the shared drives on the LAN via Wifi and I have to plug in to the LAN.I thought I'd cracked it as Kaspersky had the home wifi network down as public and I did have access via wifi for a short time, but it soon disappeared.
I am home user running Windows 7 professional and have mapped a network drive (Y that points to a folder on a LaCie NAS on my LAN. When the mapping was setup, the "Reconnect at Logon" option was selected.
Now I want to permanently disconnect that mapping. I have tried:
1) Disconnecting in Windows Explorer
2) NET USE /PERSISTENT:NO
3) NET USE Y: /D
The drive disconnects no problem, but when I login again, the mapping is back. How do I get rid of this mapping PERMANENTLY?
I have two computers running windows 7 in a router LAN. One of the computers have several external drives connected to it. I have shared the drives successfully over the network and the settings remain saved so that I don't have to reshare the drives everytime I log in.However, three of the drives remain unshared after a restart or reboot. Why is that? How can I keep the shared settings for these drives also?
I have 2 windows 7 computer on a wireless network in my house. Basically I want to be able to share the drives on both computers so that i can stream media between the computer and also devices in my home (xbox360). I went to set the drives to shared in the properties for the drives on both computers, however, whenever I try to connect to the other computer through the network section I got this pop up asking for a password, I tried login passwords and no go. So I went into the sharing options and turned off password protection and it seemed to let me through, and i can see the drive i named and setup, only now when I try clicking on the drive I shared it says (windows cannot access//Name of Folder). How do I get this to work?
I have a windows 7 pc that is part of an office network along with about 5 other machines. They are all supposed to connect to a server via network mapping of the server's shared folder. (In this case the mapping is Z:\pi-serverdata and the server is running 2008 R2 on a workgroup). Upon reboot, all systems but one will remap to this drive with no problem.
The one machine will always boot up with the message 'Windows could not reconnect network drives' The mapping is showing in windows explorer but there is a red 'x' icon showing the connection is lost. When I click on it, it prompts for windows credentials, which I enter and then it remaps with no problems. However upon next boot the same thing happens again. No matter what I try I cannot get the system to retain the credentials.
What I have tried so far: 1. Ensuring that there is a match of user names and passwords on the server and workstation. 2. Deleting the mapping and re-adding it. 3. Running a batch file to delay the mapping in order for windows to finish connecting the network first.
I would like to be able to browse to the network folder via network discovery through the workgroup but this particular machine does not have the server show up in the network listing (all other machines do show the server). Plus when pinging the server, it insists on responding with ipv6 unless I force a v4 ping...not sure it's relevant.
I have Windows 7 Professional x64.My pictures are located in this folder: L:Users<name>My Pictures
I want to share this folder with another user on my computer. Can't do it.
Simply altering the folder's permissions doesn't work. If I change permissions so that the folder in question does not inherit any permissions from parent folders, and instead allow my user read-only access to the folder...access denied.
Alright then, I tried to share the folder with my user. Although sharing usually means sharing with other computers on a network, it also applies to other users on the same machine. But the user can't access the shared folder...access denied.
I could move the folder in question to the Public user, but then everyone can see it. Holy cow...what does it take to share a folder with another user on the same computer?
We have just installed Windows 7 on one of our computers last week and we have 2 other computers that have an XP operating system The XP computers need access to shared folders on the Windows 7 computer and this was working fine yesterday However today it has suddenly stopped. I am getting errors about cannot access this drive etc I have checked up on security settings etc [URL]
Recently a few computers in our domain has switched to Win 7 from Win XP. Now after sharing folder shared folder are not visible while accessing that computer from our Win CE device. Windows XP or Win 7 users can browse shared folders but not WinCE device.Media Streaming, Network discovery, File sharing is Off. Firewall is turn off.
I have few XP Pro PCs and a windows 7 Pro x64. The XP PCs can see and access the shared Windows 7 but the Windows 7 couldn't. Windows 7 can see the XPs but when i click on the XPPCs it said Windows Can't Access XP-pc. I click the Detail and it said Network Path Wasn't found. I tried to Diagnostics and it couldn't find the problem. It looks like firewall blocked to me but i disabled windows firewall and security center from windows services. XPPCs don't have any firewall. from Windows 7 i can ping those XPs. I enabled most of the services related to the network.
From the windows7 can't open the its shared folders either. it said the network path was not fould
I have just created a VHD on my laptop so I can share is as a shared area as I have over 5 computers in my house. I want the whole household to have access to the drive but not to a folder that i own as it contains private stuff. How would I go about protecting a folder from being accessed without the correct password and username. Or maybe, how would i go about stopping the folder from being accessed from the whole network but being able to access it on the local machine?
I have 4 worstations in the same HomeGroup I can access the files of workstation 1 from the two workstations but the 3th one in the 3th one the the shared folder appears but when I try to aceess the files inside I get an error can't acess contact administrator the pasword protection is disabled in the workstation 1 and I can access the files from the other two workstations so I have no clue what is going on I have disabled the firewall and Norton IS on both workstations but still can't access the content of the sahred folder
I have a Maxtor External Hard drive and Windows 7 Premium 64 bit. I have a user setup for each member of my family on the computer. The maxtor drive was working fine uptil I decided that I wanted only myself to be able to access it only. The drive appeared as my K drive. I went to sharing and added myself as read/write access and removed the everyone share thinking that only I would be able to use the drive. I restarted my PC and now nobody can access it. When I plug the drive into the usb slot the drive whirs up as normal but there is no drive letter for it and it does not appear in device manager etc. I plugged it into my old XP machine and that cannot read it either..
I'm using Windows 7 Home Premium 64bit and it's on a network with a Techgear MB902 PVR. I used to be able to watch movies in my Windows 7 shared folders on my TV via the MB902 but after I bought a new PC and installed Windows 7 I've had problems accessing the Windows 7 shared folders.
When I connect to my PC it asks for a login and password, and none of my pc or network passwords work. Strangely enough, when I restart Windows 7 the problem goes away and I can login successfully without a password, but then later the same day or the next day the login/password problem has returned.
I've trawled the internet looking for solutions, and tried all of the plausible looking ones, editing the registry, unsharing and then resharing. They all seem to work but then I realise that it's the reboot that works and not the fixes because the problem returns.
The MB902 has a hard drive and I can access the files on that from my PC with no issues it's just going the other way that I have problems.
I guess this issue has been posted before but I am experiencing some trouble trying to connect from wireless.
Here are the details:
Windows 7 professional on Dell laptop
Windows XP professional on Dell desktop (has shared folders & printer)
Netgear Router WGR614
Laptop can see and access all shared files and printers whilst connected directly to router (via Ethernet) but cannot see them when connected via wireless.
I'm trying to access a shared folder on my windows xp machine. i went to map network drive, use different credentials, and typed in the account name and password that i had given rights to on the other computer. but it just reprompted for different credentials.as a temporary fix i created a user on this computer with the exact same credentials as the ones i typed in, and it works for that user. so apparently the computer didnt understand what i typed in for 'use different credentials'?
I have a windows 7 os on my main pc and xp pro on my laptop. when i try to access files on my main pc (windows 7) from my xp pro laptop I get asked for a user name and password. Yet when I do it the other way round I have full access with out any password ect. I have not set up any passwords and have tried my home group password but not got any joy. I have 2 other laptops both running windows 7 and have no problems networking between all windows 7 systems. all computers are running norton firewall and are configered the same.
I have a Windows 7 desktop and laptop. My desktop can access shared files on my laptop just fine.
But for my laptop to access files on my desktop I have to have a password on my desktop and have it set to "password protected sharing." I guess this is not a big issue but I don't really want a password on my desktop because it doesn't go anywhere and it's another startup step...
I've tried taking the password off the laptop but that didn't help either.
I have few computer at home with different Windows version, there are Windows XP, Windows Vista HP 32 bit and Windows 7 HP 64 bit. I have two share folder in the desktop using Windows Vista HP 32 bit, Share A is set to Full Control for Everyone and Share B has a permission access setting, allow few persons to access only. All computer can access Share A without problem. However, there is a problem with Share B. I only allow 3 users to access this share folder, 2 of them using laptop with Windows XP Home and Professional, they can access Share B without problem, the 3rd user using laptop with Windows 7 HP 64 bit (username is Jolene) can't access Share B, it shown "You have no permission to access...". I already double check the user name and password, there are correct. I try to login to the network using Jolene in other laptop with Windows XP, it can access both Share A and B. That means the username and the permission setting are correct in the Windows Vista desktop. I removed the anti virus in Windows 7 HP laptop, disable Windows firewall, or bootup in Safe mode with network support, but still can't access Share B.
I have 10 pcs on a LAN workgroup. They are mixed Windows 7 and xp. I have set the file sharing, net discovery etc on win 7 on and password protection, firewall off.They all have user accounts like pc1, pc2,...pc10 and I have also created the account of the pc I want to access the restricted folder to the pc that shares it.I have set the ownerships on Windows 7 machines too. I can access the folders on XP machines from the Windows 7 successfully. When I try to set a user-restricted shared folder to a Windows 7 pc and access it from XP I fail. It says that I do not have sufficient rights to access the folder, contact the network admin. I can only access to the folder by setting it available to "everyone" or "guest" read/write but that s not what I want.
The HomeGroup shares have been a recurring issue that I haven't been able to solve, but the really perplexing one is the shared folder issue which just cropped up. Some of my shared folders still work, but e, g and h (music and video respectively) for some reason spit back "Access Denied" on all of the other computers in my house, this is in spite of the fact that Permissions on them are set to Full Control for Everyone.With regards to HomeGroup shares, they simply don't show up no matter what I do, I'd like to fix that one too, but I'm not sure what I can do to fix that.
From virtual xp guest I can't access a shared folder on server 2003 machine.I can access it from windows 7 host.The Host, virtual xp, and server are all on the same workgroup.
I have a netbook ASUS Eee PC 1005PXD.After only two days of use, i get a black screen at the beginning: "Reboot and select proper boot device or insert boot media in selected boot device and press a key".Pressing F9 on boot doesn't work and i'm still getting the black screen.F2 is working, then in Boot Settings, i set Removable Device as 1st Boot Device. (and there is no Boot Booster option to disable).Then, using the Windows 7 USB/DVD Download Tool, i create a Windows 7 bootable USB, in order to use the System Recovery.When i get to the System Recovery Options screen, no Operating System appear in the list. (It say to load drivers in this case, but i have no idea which drivers and how to load them).
Then i press next without choosing OS, but pressing Startup Repair after that didn't help.Also using the Command Prompt didn't help (bootrec /fixmbr, bootrec /fixboot, bootrec /scanos, bootrec /rebuildbcd) The two last commands (/scanos and /rebuildbcd) give: "Number of windows installed: 0".Then i decided to reformat and reinstall Windows 7 (my netbook is new):i boot using the Windows 7 bootable USB i created before, then on first screen i press on "Install now".When i get to screen "Which type of installation do you want", i choose Custom.Then i get to screen "Where do you want to install Windows?" but the list is empty, and at the bottom, it is written "No drives were found. Click Load Driver to provide a mass storage driver for installation".
i have multiple family members in the household, along with two Windows 7 desktops and three Windows 7 laptops. All pc's are on the same workgroup with file and folder sharing working faultlessly - we do not use Homegroups.I have a large amount of important data on my desktop that serves as a data backup for all work I do on my laptop. On top of this it contains a large amount of media files that get shared to all pc's too. All communication is done over the network. However, as the other family members are far less tech savvy, shall we say, than I, I am growing concerned with how easy it would be for someone else to access my laptop backup work, as it is all business related, and do something disastrous to it.I would like to have it so that my laptop is the only machine allowed to access this backup data from my desktop. The rest of the shared folders on this desktop would have to remain accessible to 'everyone'.
