I have two computers running windows 7 in a router LAN. One of the computers have several external drives connected to it. I have shared the drives successfully over the network and the settings remain saved so that I don't have to reshare the drives everytime I log in.However, three of the drives remain unshared after a restart or reboot. Why is that? How can I keep the shared settings for these drives also?
View 1 Replies
XP SP3 is used. The Simple File Sharing is not enable.Ping from Windows 7 to XP goes through.The same log-on user name and password are used for XP and Windows 7.XP machine is visible from Windows 7.Error message is "Unknown user name or bad password. The same message when attempting to access from another Windows 7.Initially it was working but after an hour or so, it quits. I rebooted the router, XP machine and Windows 7 machine but the situation remains unchanged. There is no problem networking between the two W7s.
View 4 Replies View RelatedI have 2 windows 7 computer on a wireless network in my house. Basically I want to be able to share the drives on both computers so that i can stream media between the computer and also devices in my home (xbox360). I went to set the drives to shared in the properties for the drives on both computers, however, whenever I try to connect to the other computer through the network section I got this pop up asking for a password, I tried login passwords and no go. So I went into the sharing options and turned off password protection and it seemed to let me through, and i can see the drive i named and setup, only now when I try clicking on the drive I shared it says (windows cannot access//Name of Folder). How do I get this to work?
View 5 Replies View Relatedok i have a home network set up on 2 pcs with win 7 64bit
i have set up shared drives on both pcs ,, i have set the permisions on the shared drives so that everyone can do whatever they want change files delete files ect
so i expect to be able from one pc to cut files and paste to the other but i cant ,,, i cant even copy from one pc to the other unless i do it from the pc that is going to have the file added
Ok has anyone experienced this, I have 3 drives shared from windows 7 RTM, to windows 7 7100. everytrhing works ok ubtil I try to move, copy a file from one system to another. This makes my windows 7 rtm version loose it's network connection completely, I have to run the diagnose wizard and then it's ok. I can see and browser the folders for a week no problems.
As soon as I try to copy or move a file over the network I kills my network connection only on the windows 7 rtm system. All the other computers in the house are ok. I have one system running linux and 4 others running the windows 7 7100 build that can share and get online with out any issue's. Please let me know if you have experienced this.
I'm running a Windows7 Home Premium 32bit on a desktop and want to share its drives with the network. The desktop is LAN connected to the Wifi router and has no issues. If I LAN connect to the router with a laptop, I can access the desktop shared drives but I want to be able to access them via Wifi on a laptop. The Laptops have no problems accessing internet through wifi but will not see the shared drives on the LAN via Wifi and I have to plug in to the LAN.I thought I'd cracked it as Kaspersky had the home wifi network down as public and I did have access via wifi for a short time, but it soon disappeared.
View 1 Replies View RelatedA week ago I had to reinstall Windows 7 on a second PC (PC2) which now has an SSD. However, the original disk (a 500GB Seagate) has been used to reorganise partitions of which there are now eight. Three of these I can access from PC1 with no problem. However, the last four plus a 1TB drive there is no way I can access them - I can look at them but there's no way I can copy any files or folders to them.I've checked the drive permissions via the Security tab and set everything I can to Full Control. However, out of the five there is one Name I cannot change and that is CREATOR OWNER which has permissions set to Special and which so far I've found no way of changing. In relation to the Names they are a little different to mine. All five are the same except that PC2 has CREATOR OWNER. I have Authenticated Users that PC2 doesn't have; none of PC2's drives have an Authenticated Users entry. Should it?
To clarify the Names we both have they are listed below:
PC1
Administrators (Username/Administrator)
Authenticated Users
Everyone
SYSTEM
[code].....
I've just checked a third PC we have upstairs and that is different again most drives ONLY having Everyone with only one drive having the Names above under PC1 but NOT Everyone. So I suppose that makes me one confused chick. What the hell gives with the Names Groups? What should I have and what should I NOT have or not need?
I am home user running Windows 7 professional and have mapped a network drive (Y that points to a folder on a LaCie NAS on my LAN. When the mapping was setup, the "Reconnect at Logon" option was selected.
Now I want to permanently disconnect that mapping. I have tried:
1) Disconnecting in Windows Explorer
2) NET USE /PERSISTENT:NO
3) NET USE Y: /D
The drive disconnects no problem, but when I login again, the mapping is back. How do I get rid of this mapping PERMANENTLY?
I have a windows 7 pc that is part of an office network along with about 5 other machines. They are all supposed to connect to a server via network mapping of the server's shared folder. (In this case the mapping is Z:\pi-serverdata and the server is running 2008 R2 on a workgroup). Upon reboot, all systems but one will remap to this drive with no problem.
The one machine will always boot up with the message 'Windows could not reconnect network drives' The mapping is showing in windows explorer but there is a red 'x' icon showing the connection is lost. When I click on it, it prompts for windows credentials, which I enter and then it remaps with no problems. However upon next boot the same thing happens again. No matter what I try I cannot get the system to retain the credentials.
What I have tried so far:
1. Ensuring that there is a match of user names and passwords on the server and workstation.
2. Deleting the mapping and re-adding it.
3. Running a batch file to delay the mapping in order for windows to finish connecting the network first.
I would like to be able to browse to the network folder via network discovery through the workgroup but this particular machine does not have the server show up in the network listing (all other machines do show the server). Plus when pinging the server, it insists on responding with ipv6 unless I force a v4 ping...not sure it's relevant.
On this network there are three Windows 7 machines and two Windows XP machines. One of the Windows 7 machines is acting as a server providing all the other computers with shared folders that they network to via the "map network drive feature". The two Windows 7 machines connect to this central Windows 7 machine no problem. But the XP machines will sometimes lose connection to the network drives when accessed. They cannot see the network drives until the central Windows 7 computer is restarted. The other two Windows 7 machines have no problem connecting, even when the XP machines are having problems.
I found this article and wanted to check here to make sure it was applicable to my situation before I go ahead and muck around in the registry: Mapped Drive Connection to Network Share May Be Lost Problem is, the article says this: Quote: On a computer that runs one of the versions of Windows that is listed at the beginning of this article... There aren't any versions of Windows listed anywhere in the article, or none that I can find. In addition to that, it doesn't specify whether I'm supposed to be doing this on the server end or the client end. I would assume the client end but it's just another thing I want to make sure of before I go ahead and do it.
I have an intermittent problem with networking my desktop machine to my laptop. Sometimes after I hibernate my laptop and then wake it up, I am unable to access my shared drives on my laptop from my desktop. I am always able to go the other way (access shared drives on desktop from laptop. When it does this, even reboots of both machines don't help.
I just asked Windows 7 to diagnose and I get this. Usually after "messing" with the network settings, log offs, reboots, who knows, it usually starts working both ways again until some later hibernation restart of laptop. I wish I could pinpoint some common things that cause it but I just can't figure it out. Any ideas?
I haven't really had any issues since I first installed Windows 7 and now I'm trying to access a shared drive over a network and I'm getting this annoying error message that I cannot access a shared drive over the network.
I decided to reinstall Windows 7 and before that I never had this issue.
I have not installed any third party software, I've enabled network discovery and right now I cannot access any shared folders or drives, at all, though it can see it.
I'm getting that stupid error message: "<Network drive> is not accessible. You might not have permission to use this network resource. Contact the administrator of the server to find out if you have access permissions. Access is denied."
What am I doing wrong here?
How do I get it to save in the shared mailbox folder not my personal folder in outlook 2010?
View 1 Replies View RelatedI am able to access shraed folders and shared printers, I Not able to see anything...
View 2 Replies View RelatedI have an ad-hoc wireless connection set up on my Verizon XV6800 phone. I am able to connect to it and use the internet with no problem; however, Windows 7 will not remember the connection. Every time I restart the computer I have to click the network SSID on the list and choose "Connect" and the it prompts me for the network key. (It remembers the connection settings for a regular wireless network properly.)
View 9 Replies View Relatedi inherited a laptop with window seven home edition and i cant access it because it has a password.The person who sent it to me unfortunately i cant reach him and i need to use it.Please help how i can access it.
View 1 Replies View RelatedWhile looking at my Windows files, I cant remember were in windows exactly but I found a AMD file but I am running a Nvidea GPU. Is there any reason for this to be here? I have been having some stability issues occasionally so I wonder if this is it? Some AMD drivers have arrived in my system.
View 2 Replies View RelatedAfter I forced shut down my netbook by hitting the power button, I get the message force shut or cancel whenever I shut down. Is there anything I can do to turn the message screen off? I had to power off when my netbook hanged. Since then the force shutdown or cancel message always blink when i shut down
View 3 Replies View RelatedI disassembled my computer, carried it in my luggage and reassembled it. The only thing changed is the case. Since reassembling it, Windows (7 ultimate 64-bit) will not recognize either of my 2 DVD-RW's. At boot, my bios offers them as boot options, and with the Win7 disk in the one, it will boot from it if selected. However, once within the Win7 environment...nothing. Not even any yellow exclamation marks in device driver. I have tried to force installation, tried installing a legacy device, everything I can think of. how I can force Win7 to search for and find my DVD-RW's?
View 8 Replies View RelatedI disassembled my computer and then reassembled it. The only thing I changed is the case. Since reassembling it, Windows (7 ultimate 64-bit) will not recognize either of my 2 DVD-RW's. At boot, my bios offers them as boot options, and with the Win7 disk in the one, it will boot from it if selected. However, once within the Win7 environment, nothing. Not even any yellow exclamation marks in device driver. Both DVD-RW's are on an IDE cable, while my HD's are all SATA. I have tried to force installation, tried installing a legacy device, everything I can think of. How I can force Win7 to search for and find my DVD-RW's?
View 1 Replies View RelatedAn excellent printer/fax/scanner in my office cannot work from Win7, according to itself.No updated Win7 driver seems to be available for my HP Color LaserJet 2840.I've seen it work before, but do not know how to do it.How can I force Win7 to use an XP driver (in the machine that's connected to the printer) over the network?
View 16 Replies View RelatedIs there some way to force a win 7 laptop to use 802.11g instead of 802.11n? I need it to be able to talk to a wireless printer using 802.11g
View 1 Replies View RelatedWhen I shut down my PC (Compaq Presario CQ5600y/AMD Athlon) running Windows 7, I get a quick message that says something like program running force shut down? (although nothing is running that I know of). It only started doing this this week. Once I click on the "force shut down" button, my PC shuts off fine, but I would like to know what the "force shut down" is all about.
View 10 Replies View RelatedI am trying to get internet sites to remember passwords. Cannot find it in in options ...
View 1 Replies View RelatedMy laptop windows 7 will not remember E Mail Addresses. I need to type in my address everytime I want to check my E Mails.
View 1 Replies View RelatedMy windows 7 laptop will not remember the wifi password for my home wifi connection. If I leave my house and then come back, I need to input the network password again. Why is this? My computer remembers other wifi connection passwords.
View 1 Replies View RelatedWhat is the rational (if there actually is any) of not allowing one to save window size & position (other than the last window opened)?
Without using a 3rd party program (which seems to be the norm with Win7) has someone found a way to allow saving resized windows other than the last window opened??
In windows XP, I could turn off the annoying "remember folder settings" that forced each folder to have it's own settings instead of always being in the same as the one I left it when I closed it. Windows 7 does not do that. I can tell it to "make all folders like current" which isn't what I want. Is there an option or was that removed to be made inferior to XP in another way?
View 6 Replies View RelatedI have some .mkv files on my system.
Windows 7 does not seem to remember the programs that I used to open those files with.
I keep getting the default open with menu option without any available programs and then select a default program.
Even if open the file with WMP64, Winamp, BSplayer or Media Player Classic, those programs do not appear in the open with context menu, and I cant quickly open the file with those programs.
Is there something wrong which I can fix?
I have Windows 7 32-bit(official RTM, clean install) only 1 account on it which of course is Admin.Sometimes when I press the Windows button + l to lock the screen and come back after a few minutes, enter the password but Windows 7 reports it as wrong password all the time. I have had the same password for 3 years so I know for sure I entered it correctly all in lower case. Also, if I deliberately try to enter a wrong password when my normal one doesn't work, I get the white round circle indicating that its being processed. Then after like 3 minutes, Windows 7 reports it as being the wrong password (the correct behavior from Windows 7 would have been to reject the the wrong password immediately).So I have to do a manual shutdown as it's the option left. I have tried to reinstall Windows 7 many times but this problem just keeps happening randomly.
View 3 Replies View RelatedFolder windows do not (have option) to remember their size and position.
View 6 Replies View Related
