ok i have a home network set up on 2 pcs with win 7 64bit
i have set up shared drives on both pcs ,, i have set the permisions on the shared drives so that everyone can do whatever they want change files delete files ect
so i expect to be able from one pc to cut files and paste to the other but i cant ,,, i cant even copy from one pc to the other unless i do it from the pc that is going to have the file added
I have 2 windows 7 computer on a wireless network in my house. Basically I want to be able to share the drives on both computers so that i can stream media between the computer and also devices in my home (xbox360). I went to set the drives to shared in the properties for the drives on both computers, however, whenever I try to connect to the other computer through the network section I got this pop up asking for a password, I tried login passwords and no go. So I went into the sharing options and turned off password protection and it seemed to let me through, and i can see the drive i named and setup, only now when I try clicking on the drive I shared it says (windows cannot access//Name of Folder). How do I get this to work?
View 5 Replies View RelatedI have an intermittent problem with networking my desktop machine to my laptop. Sometimes after I hibernate my laptop and then wake it up, I am unable to access my shared drives on my laptop from my desktop. I am always able to go the other way (access shared drives on desktop from laptop. When it does this, even reboots of both machines don't help.
I just asked Windows 7 to diagnose and I get this. Usually after "messing" with the network settings, log offs, reboots, who knows, it usually starts working both ways again until some later hibernation restart of laptop. I wish I could pinpoint some common things that cause it but I just can't figure it out. Any ideas?
Ok has anyone experienced this, I have 3 drives shared from windows 7 RTM, to windows 7 7100. everytrhing works ok ubtil I try to move, copy a file from one system to another. This makes my windows 7 rtm version loose it's network connection completely, I have to run the diagnose wizard and then it's ok. I can see and browser the folders for a week no problems.
As soon as I try to copy or move a file over the network I kills my network connection only on the windows 7 rtm system. All the other computers in the house are ok. I have one system running linux and 4 others running the windows 7 7100 build that can share and get online with out any issue's. Please let me know if you have experienced this.
I'm running a Windows7 Home Premium 32bit on a desktop and want to share its drives with the network. The desktop is LAN connected to the Wifi router and has no issues. If I LAN connect to the router with a laptop, I can access the desktop shared drives but I want to be able to access them via Wifi on a laptop. The Laptops have no problems accessing internet through wifi but will not see the shared drives on the LAN via Wifi and I have to plug in to the LAN.I thought I'd cracked it as Kaspersky had the home wifi network down as public and I did have access via wifi for a short time, but it soon disappeared.
View 1 Replies View RelatedA week ago I had to reinstall Windows 7 on a second PC (PC2) which now has an SSD. However, the original disk (a 500GB Seagate) has been used to reorganise partitions of which there are now eight. Three of these I can access from PC1 with no problem. However, the last four plus a 1TB drive there is no way I can access them - I can look at them but there's no way I can copy any files or folders to them.I've checked the drive permissions via the Security tab and set everything I can to Full Control. However, out of the five there is one Name I cannot change and that is CREATOR OWNER which has permissions set to Special and which so far I've found no way of changing. In relation to the Names they are a little different to mine. All five are the same except that PC2 has CREATOR OWNER. I have Authenticated Users that PC2 doesn't have; none of PC2's drives have an Authenticated Users entry. Should it?
To clarify the Names we both have they are listed below:
PC1
Administrators (Username/Administrator)
Authenticated Users
Everyone
SYSTEM
[code].....
I've just checked a third PC we have upstairs and that is different again most drives ONLY having Everyone with only one drive having the Names above under PC1 but NOT Everyone. So I suppose that makes me one confused chick. What the hell gives with the Names Groups? What should I have and what should I NOT have or not need?
XP SP3 is used. The Simple File Sharing is not enable.Ping from Windows 7 to XP goes through.The same log-on user name and password are used for XP and Windows 7.XP machine is visible from Windows 7.Error message is "Unknown user name or bad password. The same message when attempting to access from another Windows 7.Initially it was working but after an hour or so, it quits. I rebooted the router, XP machine and Windows 7 machine but the situation remains unchanged. There is no problem networking between the two W7s.
View 4 Replies View RelatedI am home user running Windows 7 professional and have mapped a network drive (Y that points to a folder on a LaCie NAS on my LAN. When the mapping was setup, the "Reconnect at Logon" option was selected.
Now I want to permanently disconnect that mapping. I have tried:
1) Disconnecting in Windows Explorer
2) NET USE /PERSISTENT:NO
3) NET USE Y: /D
The drive disconnects no problem, but when I login again, the mapping is back. How do I get rid of this mapping PERMANENTLY?
I have two computers running windows 7 in a router LAN. One of the computers have several external drives connected to it. I have shared the drives successfully over the network and the settings remain saved so that I don't have to reshare the drives everytime I log in.However, three of the drives remain unshared after a restart or reboot. Why is that? How can I keep the shared settings for these drives also?
View 1 Replies View RelatedI have a windows 7 pc that is part of an office network along with about 5 other machines. They are all supposed to connect to a server via network mapping of the server's shared folder. (In this case the mapping is Z:\pi-serverdata and the server is running 2008 R2 on a workgroup). Upon reboot, all systems but one will remap to this drive with no problem.
The one machine will always boot up with the message 'Windows could not reconnect network drives' The mapping is showing in windows explorer but there is a red 'x' icon showing the connection is lost. When I click on it, it prompts for windows credentials, which I enter and then it remaps with no problems. However upon next boot the same thing happens again. No matter what I try I cannot get the system to retain the credentials.
What I have tried so far:
1. Ensuring that there is a match of user names and passwords on the server and workstation.
2. Deleting the mapping and re-adding it.
3. Running a batch file to delay the mapping in order for windows to finish connecting the network first.
I would like to be able to browse to the network folder via network discovery through the workgroup but this particular machine does not have the server show up in the network listing (all other machines do show the server). Plus when pinging the server, it insists on responding with ipv6 unless I force a v4 ping...not sure it's relevant.
I have no problem networking the two operating systems and sharing folders and printers (use work not home on Windows 7). BUT, the minute I open network and/or network sharing on the windows 7 computer I lose my internetconnection on both computers and have to go through a shut down of the Windows 7 computer and unplug the cable modem and the router and restart everything.You can't get to shared folders without going through network. If you do you have to restart everything to get back internet connection.
View 1 Replies View RelatedWindows 7 is running flawlessly except I have this one problem. When I go to install ANY anti-virus software it kills my ability to access the shared files and folders from my Windows 7 machine. I uninstall the AV and all is back to normal.
Is there something I am missing or doing wrong?
On this network there are three Windows 7 machines and two Windows XP machines. One of the Windows 7 machines is acting as a server providing all the other computers with shared folders that they network to via the "map network drive feature". The two Windows 7 machines connect to this central Windows 7 machine no problem. But the XP machines will sometimes lose connection to the network drives when accessed. They cannot see the network drives until the central Windows 7 computer is restarted. The other two Windows 7 machines have no problem connecting, even when the XP machines are having problems.
I found this article and wanted to check here to make sure it was applicable to my situation before I go ahead and muck around in the registry: Mapped Drive Connection to Network Share May Be Lost Problem is, the article says this: Quote: On a computer that runs one of the versions of Windows that is listed at the beginning of this article... There aren't any versions of Windows listed anywhere in the article, or none that I can find. In addition to that, it doesn't specify whether I'm supposed to be doing this on the server end or the client end. I would assume the client end but it's just another thing I want to make sure of before I go ahead and do it.
Recently a few computers in our domain has switched to Win 7 from Win XP. Now after sharing folder shared folder are not visible while accessing that computer from our Win CE device. Windows XP or Win 7 users can browse shared folders but not WinCE device.Media Streaming, Network discovery, File sharing is Off. Firewall is turn off.
View 10 Replies View RelatedI have folders in My Documents which I have chosen to lock so they are not shared on the network, but when I browse to my computer from another computer on the network, the locked files are present and accessible.I'm pretty sure there's another way to lock folders from being shared on the network, but I don't know what it is.How can I truly lock these folders so they're not accessible on the network?
View 7 Replies View RelatedI have a new HP8710W laptop that originally had Windows XP Professional installed from the factory. I just received my Windows 7 Professional 32 bit upgrade kit and have installed it on my computer
I also have a Desktop PC that is running Windows XP Professional.
Prior to installing Windows 7 on my laptop I was able to see the shared folders on HP8710W laptop while running the Windows XP Professional operating system. I would like to be able to access the shared files on my Desktop computer that is running Windows XP Professional with the HP8710W laptop that is running Windows 7 Professional 32 bit. I am a novice when it comes to networks and would appreciate any suggestions on what to do to get this to work.
I anticipate installing Windows 7 on my desktop in the near future but have not done the conversion as of this date.
I would appreciate some step by step instructions if they are available and not too much trouble to pass on to me.
I am running a TRENDNET TEW-432BRP wireless router H/W:vDl.OR
Windows 7 adding network drive shortcuts to taskar. I'm searching a similar way with XP Quick launch bar to add some network folders (which aren't mapped as drives) to taskbar.hen dragging to taskbar, there opens a window (Pinned/Recent/) which I understand means shortcut has now pinned. Now there are listed already several network shortcuts, but still these are not visible on taskbar. Where do these go and how to make these visible? It looks like it's a separate toolbar, where I can open already previously dragged shortcuts, but how to open it without dragging a new network shortcut to taskbar?When dragging an application to tasbar, there isn't such a window and application shortcut is added without any question asked.It seems like Windows 7 doesn't support dragging and creating network shares shortcuts directly onto taskabar or did I missed something essential?
View 1 Replies View RelatedSo basically new folders added by uTorrent to my "Download" folder which is shared to everyone on my network don't show up when I access the older from any computer on the network. (except the one where the files are located)I have to say they do eventually show up... I guess when I restart the host or something maybe?
View 1 Replies View RelatedWe have a company drive that we map folders from to certain computers. They reconnected at log in like normal. However, we have a separate external drive that when I map a folder from it, it never reconnects on log in. I have set the folder permissions for the user I want. I have tried directly connecting with the folder share name and also using the IP address of the server. They will initially connect when you set it up at first, but then it never reconnects to the drive/folder when logging back on. I have tried almost everything I can find and it still never seems to connect.
View 2 Replies View RelatedI've been wracking my brains, but cannot make this work in windows 7. It was super easy in xp. How can I set up 2 computers to share folders? I've created a homegroup, on both computers, but still they aren't communicating.
View 1 Replies View RelatedI currently have a printer connected to a computer in my room (Canon Pixma iP4300 [USB]). I also have a computer in the office which is connected to the network via a wireless extender. I am a little short of space in my room and am looking at which peripherals I can move away without too much hassle - the printer is one such thing which has a relatively large footprint and would ideally be located in the office.I am fairly confident that with a little research I could set up the printer to be shared from the office PC (Vista Home Premium x32) to other computers on the network, which would be a more suitable location for it.However, one thing that occurs to me is that it would require the office PC to be on in oder for other machines to print. Currently the office PC is set to go to sleep after a period of inactivity [20~30 minutes]. My question is, would it be possible for other computers on the network to wake this machine in order to use the printer connected to it?
View 3 Replies View RelatedI have two computeres set up in an offline LAN with a 4 port switch connected to a router. One is a server with 4 shared 1TB drives. The other is just a works station. Both computers are running windows 7 ultimate x64. My problem is that 1 drive which I've label as Z: keeps disconnecting in the workstation. When I check the server I noticed that the Z drive has been marked as un shared. So I re enable sharing and set the desired permission. Then I re map the drive on the workstation. A few days later and the same issue happens. Both computers are always left on and I've set the power options accordingly.
View 9 Replies View RelatedI am having difficulties accessing the network share to my Windows 2000 printer [printer attatched via USB to Win2000 computer, shared among all computers]. Both computers are behind a router, and are on the same workgroup.
My Vista machine did not have any problems accessing this printer or authenticating to Windows 2000, but Windows 7 seems to. The problem is when I go to connect to the PC, I am prompted for a username and password, but upon entering a valid one, it does not connect and comes back as invalid.
I attempted to navigate to the share manually through the "add pritner" device, but this did not work either. [Giving //computername/printer]
Using Windows7 RC1, build 7100 and Windows 2000 SP4. No difficulty sharing or authenticating on the LAN with any other OS.
The search engine does not work on network directories.
View 1 Replies View RelatedI have installed Windows 7 on a new PC and been playing around with it for a couple of days.
I have added it to my home workgroup and shared out some folders. I have turned off Windows firewall, however if I try to view the shared folders from other machines (XP) on the home network I get asked for a login and password.
Yet if I browse the other XP machines from the Windows 7 machine I can see all their folders. I can't find a setting anywhere that would seem to address this!
I haven't really had any issues since I first installed Windows 7 and now I'm trying to access a shared drive over a network and I'm getting this annoying error message that I cannot access a shared drive over the network.
I decided to reinstall Windows 7 and before that I never had this issue.
I have not installed any third party software, I've enabled network discovery and right now I cannot access any shared folders or drives, at all, though it can see it.
I'm getting that stupid error message: "<Network drive> is not accessible. You might not have permission to use this network resource. Contact the administrator of the server to find out if you have access permissions. Access is denied."
What am I doing wrong here?
i have multiple family members in the household, along with two Windows 7 desktops and three Windows 7 laptops. All pc's are on the same workgroup with file and folder sharing working faultlessly - we do not use Homegroups.I have a large amount of important data on my desktop that serves as a data backup for all work I do on my laptop. On top of this it contains a large amount of media files that get shared to all pc's too. All communication is done over the network. However, as the other family members are far less tech savvy, shall we say, than I, I am growing concerned with how easy it would be for someone else to access my laptop backup work, as it is all business related, and do something disastrous to it.I would like to have it so that my laptop is the only machine allowed to access this backup data from my desktop. The rest of the shared folders on this desktop would have to remain accessible to 'everyone'.
View 7 Replies View RelatedI decided to connect the xbox to my home network, but when I did so all of the shared files and folders got locked. Being locked I cannot watch the videos or play the music with manually unlocking them first. So is there a way to revert them back to their unlocked state? There has to be an easier way than manually doing it... because I have around 50GB of music... that would take an eternity. Here's a screenshot for reference: [URL].
View 3 Replies View RelatedPrinter plugged into Win7 box - how to print from remote XP machine? describes an original difficulty I had getting remote computers (laptops and desktops) to print to a USB printer connected to my Windows 7 box. Read far enough and you'll see that I solved that problem using Networking issue - Win7 printer, XP remote machines.Fast forward 13 or so months. Since that time I have replaced the printer, I've had a motherboard and processor issue with my box (since fixed), and no interruption of things working as they should. My printer - Canon ip4800 series - is USB hardwired to my Windows 7 computer, and the other home computers - two Windows 7 laptops, an XP box, and an XP netbook - can print to the printer, and view files on my Windows 7 machine, over our wireless home network. And that's been constant through the changes described.
Then yesterday, for no known reason, my daughter's Windows 7 laptop stopped being able to print. She'd send jobs to the correct printer, but they'd just queue up, with the queue visible from her machine, but not when I looked at the printer from my machine (that is looking at the print queue from her machine shows the jobs, but looking at it from mine shows no jobs).Nothing I did would result in stuff from her machine, from any application, to go to the printer.I finally deleted the printer from her machine, figuring I'd just add it back.I try adding a printer to the laptop, it doesn't find the printer on the list of available printers. When I try adding it by typing the name - \mywin7canon ip4800 series - that fails.When I look at "network" from her laptop, my computer shows up, but if I click on it, Windows says it can't connect.
When I type ping her_computer from a DOS box, it can't find it - but when I type ping any_other_computer it finds those.Her laptop can get on the internet from our home wireless network. All the other computers in the house - Windows 7 and XP - can access shared files on my PC, and more importantly, print across the network to my USB printer.Please, patiently and precisely, guide me through stuff to check on my PC and her laptop, to get this working again. I've been through the network and sharing center on my PC and the settings are correct.Again, as it is right now, my printer is not defined on her laptop.Final, cro-magnon- level question here: If I did a system restore on her laptop, back to a point when it had been able to print, might that fix things?
How do I get it to save in the shared mailbox folder not my personal folder in outlook 2010?
View 1 Replies View RelatedI am able to access shraed folders and shared printers, I Not able to see anything...
View 2 Replies View Related