I am home user running Windows 7 professional and have mapped a network drive (Y that points to a folder on a LaCie NAS on my LAN. When the mapping was setup, the "Reconnect at Logon" option was selected.
Now I want to permanently disconnect that mapping. I have tried:
1) Disconnecting in Windows Explorer
2) NET USE /PERSISTENT:NO
3) NET USE Y: /D
The drive disconnects no problem, but when I login again, the mapping is back. How do I get rid of this mapping PERMANENTLY?
On this network there are three Windows 7 machines and two Windows XP machines. One of the Windows 7 machines is acting as a server providing all the other computers with shared folders that they network to via the "map network drive feature". The two Windows 7 machines connect to this central Windows 7 machine no problem. But the XP machines will sometimes lose connection to the network drives when accessed. They cannot see the network drives until the central Windows 7 computer is restarted. The other two Windows 7 machines have no problem connecting, even when the XP machines are having problems.
I found this article and wanted to check here to make sure it was applicable to my situation before I go ahead and muck around in the registry: Mapped Drive Connection to Network Share May Be Lost Problem is, the article says this: Quote: On a computer that runs one of the versions of Windows that is listed at the beginning of this article... There aren't any versions of Windows listed anywhere in the article, or none that I can find. In addition to that, it doesn't specify whether I'm supposed to be doing this on the server end or the client end. I would assume the client end but it's just another thing I want to make sure of before I go ahead and do it.
've got a problem getting offline folder permissions to stick after restarts in our domain. Here's what I do:Go to MC>shared folders>shares>C$ (as an example)>properties>offline settings> and then I change "only files and folders users specify..." to "All files...". Apply and done.It works like a champ for what I'm trying to do (enable Restore Previous Versions of files to actually work- I learned that RPV fix from another thread here at seven), but after each restart the settings are restored to default. I'm assuming there's a group policy I can implement that'll auto-set those permissions permanently but I can't find any 'offline' shared folder permissions options anywhere
I am trying to upgrade the hard drive which has my operating system on itI disconnect all drives except the one which has the operating system and the new drive which will replace the old one.I use Norton ghost to copy from the old to the new but when i connect the new drive only it does not boot into windows.I beleive i have to make the partition of the new drive as active but at what stage do i have to do this?
ok i have a home network set up on 2 pcs with win 7 64bit
i have set up shared drives on both pcs ,, i have set the permisions on the shared drives so that everyone can do whatever they want change files delete files ect
so i expect to be able from one pc to cut files and paste to the other but i cant ,,, i cant even copy from one pc to the other unless i do it from the pc that is going to have the file added
Ok has anyone experienced this, I have 3 drives shared from windows 7 RTM, to windows 7 7100. everytrhing works ok ubtil I try to move, copy a file from one system to another. This makes my windows 7 rtm version loose it's network connection completely, I have to run the diagnose wizard and then it's ok. I can see and browser the folders for a week no problems.
As soon as I try to copy or move a file over the network I kills my network connection only on the windows 7 rtm system. All the other computers in the house are ok. I have one system running linux and 4 others running the windows 7 7100 build that can share and get online with out any issue's. Please let me know if you have experienced this.
I'm running a Windows7 Home Premium 32bit on a desktop and want to share its drives with the network. The desktop is LAN connected to the Wifi router and has no issues. If I LAN connect to the router with a laptop, I can access the desktop shared drives but I want to be able to access them via Wifi on a laptop. The Laptops have no problems accessing internet through wifi but will not see the shared drives on the LAN via Wifi and I have to plug in to the LAN.I thought I'd cracked it as Kaspersky had the home wifi network down as public and I did have access via wifi for a short time, but it soon disappeared.
A week ago I had to reinstall Windows 7 on a second PC (PC2) which now has an SSD. However, the original disk (a 500GB Seagate) has been used to reorganise partitions of which there are now eight. Three of these I can access from PC1 with no problem. However, the last four plus a 1TB drive there is no way I can access them - I can look at them but there's no way I can copy any files or folders to them.I've checked the drive permissions via the Security tab and set everything I can to Full Control. However, out of the five there is one Name I cannot change and that is CREATOR OWNER which has permissions set to Special and which so far I've found no way of changing. In relation to the Names they are a little different to mine. All five are the same except that PC2 has CREATOR OWNER. I have Authenticated Users that PC2 doesn't have; none of PC2's drives have an Authenticated Users entry. Should it?
To clarify the Names we both have they are listed below:
PC1 Administrators (Username/Administrator) Authenticated Users Everyone SYSTEM
[code].....
I've just checked a third PC we have upstairs and that is different again most drives ONLY having Everyone with only one drive having the Names above under PC1 but NOT Everyone. So I suppose that makes me one confused chick. What the hell gives with the Names Groups? What should I have and what should I NOT have or not need?
XP SP3 is used. The Simple File Sharing is not enable.Ping from Windows 7 to XP goes through.The same log-on user name and password are used for XP and Windows 7.XP machine is visible from Windows 7.Error message is "Unknown user name or bad password. The same message when attempting to access from another Windows 7.Initially it was working but after an hour or so, it quits. I rebooted the router, XP machine and Windows 7 machine but the situation remains unchanged. There is no problem networking between the two W7s.
I have two computers running windows 7 in a router LAN. One of the computers have several external drives connected to it. I have shared the drives successfully over the network and the settings remain saved so that I don't have to reshare the drives everytime I log in.However, three of the drives remain unshared after a restart or reboot. Why is that? How can I keep the shared settings for these drives also?
I have 2 windows 7 computer on a wireless network in my house. Basically I want to be able to share the drives on both computers so that i can stream media between the computer and also devices in my home (xbox360). I went to set the drives to shared in the properties for the drives on both computers, however, whenever I try to connect to the other computer through the network section I got this pop up asking for a password, I tried login passwords and no go. So I went into the sharing options and turned off password protection and it seemed to let me through, and i can see the drive i named and setup, only now when I try clicking on the drive I shared it says (windows cannot access//Name of Folder). How do I get this to work?
I have a windows 7 pc that is part of an office network along with about 5 other machines. They are all supposed to connect to a server via network mapping of the server's shared folder. (In this case the mapping is Z:\pi-serverdata and the server is running 2008 R2 on a workgroup). Upon reboot, all systems but one will remap to this drive with no problem.
The one machine will always boot up with the message 'Windows could not reconnect network drives' The mapping is showing in windows explorer but there is a red 'x' icon showing the connection is lost. When I click on it, it prompts for windows credentials, which I enter and then it remaps with no problems. However upon next boot the same thing happens again. No matter what I try I cannot get the system to retain the credentials.
What I have tried so far: 1. Ensuring that there is a match of user names and passwords on the server and workstation. 2. Deleting the mapping and re-adding it. 3. Running a batch file to delay the mapping in order for windows to finish connecting the network first.
I would like to be able to browse to the network folder via network discovery through the workgroup but this particular machine does not have the server show up in the network listing (all other machines do show the server). Plus when pinging the server, it insists on responding with ipv6 unless I force a v4 ping...not sure it's relevant.
I have an intermittent problem with networking my desktop machine to my laptop. Sometimes after I hibernate my laptop and then wake it up, I am unable to access my shared drives on my laptop from my desktop. I am always able to go the other way (access shared drives on desktop from laptop. When it does this, even reboots of both machines don't help.
I just asked Windows 7 to diagnose and I get this. Usually after "messing" with the network settings, log offs, reboots, who knows, it usually starts working both ways again until some later hibernation restart of laptop. I wish I could pinpoint some common things that cause it but I just can't figure it out. Any ideas?
I haven't really had any issues since I first installed Windows 7 and now I'm trying to access a shared drive over a network and I'm getting this annoying error message that I cannot access a shared drive over the network.
I decided to reinstall Windows 7 and before that I never had this issue.
I have not installed any third party software, I've enabled network discovery and right now I cannot access any shared folders or drives, at all, though it can see it.
I'm getting that stupid error message: "<Network drive> is not accessible. You might not have permission to use this network resource. Contact the administrator of the server to find out if you have access permissions. Access is denied."
When I press "Connect or Disconnect", it pops up an infobox saying "You are currently connected to: xnetwork"
However, there is no option to disconnect from the network. This is extremely frustrating; apparently I'm blind, but I've tried disabling and re-enabling the adapter to no avail.
Since doing a clean install of Windows 7 my internet keeps timing out. The icon in the task bar shows that it's normal, but I'll be online and after a couple minutes the internet just stops. When I click on the icon it says "connected" and "internet access."I have tried on both a Netgear and Apple router, so it's not a router issue. I reset the modem and routers a dozen times. I called my ISP and they said everything looks normal. My Droid phone works fine and so does a Macbook in the house.I have rolled back my Atheros5007 wireless card driver, which did nothing. And then tried upgrading the latest version, which did nothing. Uninstalled the driver then reinstalled, still with no luck.I was running Windows 7 fine all year and did the clean install as something I do every year to keep my computer running well.
Why is it that so many Western Digital products suck at what they do? Every time I tried using a storage device by WD it's been acting up. One time a drive wasn't even being detected by a computer (or other computers I've tried it on) and now this new 1 TB external drive is not wanting to disconnect safely from my laptop. I did a ton of searching online and apparently, despite it not actually saving anything it's still running processes as if the person who made it assumed you don't ever want to disconnect it from your computer (which is stupid for the fact one shuts off his computer eventually at one poine) and instead want to constantly back up weekly. I made one backup and that's all I want to do at the moment. I also want to shut off my computer, but if I do that while I still get the error message "can't disconnect external drive since it's still in use", wouldn't shutting the computer down then be equivalent to unplugging the drive before it's "safe" to remove? I literally waited a full day to get my 350 GB info on this drive, and I don't want it to get corrupted through unplugging or even shutting down the computer when the drive is "still in use".By the way, it says it's "in use" but I am NOT seeing it download or backup anything (because I already finished this hours ago). Could it be that it's saving something that I'm not aware of? Or is it simply "connected" to my computer and that is one of WD's definitions of "currently in use"? If the latter is true, I guess logging off/shutting down won't do anything then, but I'd still like to be sure.
Internet disconnects after using for sometime on my computer . The network icon on the task bar shows no Internet access.When I disabled the network adapter, but when I tried to enable it, windows just shows me the enabling window but nothing happens. So I had to restart the system but it also got stuck at he shutting down screen.So when I booted the system after a force shutdown, the network adapter was enabled but the same problem happened after some time. My modem auto connects to the Internet service so I do not dial for connecting to the Internet. I use the same modem to browse Internet from my iPad and the Internet works on the device.Recently installed a driver for a USB data card.
I have a wireless printer which has been working fine. Now although everything is conected my printer has decided not to acknowledge it. I have to put the USB cable in to print. I have now uninstalled the printer ready to re-install it, but I don't know how to disconnect it from the internet.
Running Windows 7 Ultimate. I wanted to connect my laptop to an external monitor so I pressed "Windows key + X", then clicked "connect display", then "extend."
On most computers, doing this will allow you to output the display to another monitor.
When I did it on my laptop, the screen started flickering and became garbled. It's too garbled to see, and I can't find the mouse and undo what I've done. I tried restarting but it's still like this.
My external HD has crapped itself, and while trying everything to bring it back, I am going down the track of wondering if its a .pst issue and want to disconnect the .pst file from outlook so it doesnt try to connect to the HD, in hope that the HD will come back however I cant open outlook to do so. How can I disconnect the .pst without opening outlook? Im using outlook 2010, Windows 7 professional.
I'm trying to transfer between my Desktop computer (XP) and laptop (Windows 7). When I do it wifi it only transfers at speeds between 1MBs to 3MBs. When I physically connect to my router I get better speeds at 10-11Mbs. However in both cases on large files it loses connection.It says that connection lost/failed and gives me option of retry/skip. When I hit retry it still doesn't work. When I disconnect and retry that method it starts up again from scratch however rarely does it fully transfer a file. These files are anywhere from 2GIGs to 4GIGS.I don't have anti-security on either computer. I'm using new Netgear router.
I have ADSL connection, i use WiFi enable adsl router (ZTE ZXV10 W300) for share that connection internet connection with my home other devices. My ADSL internet connection not disconnect but my WiFi connection drop most of the time.
I use Windows 7 Pro on our company LAN. I had to connect temporarily to another computer on the LAN to access some file shares there. Now I would like to disconnect. I haven't found any way to do this.
i am connected to the internet but suddenly the yellow icon apprears and i get disconnected and then have to disconnect the wi-fi again and connect it back. Then it starts workin.