Can't Disconnect Projector, Screen Is Garbled
Nov 5, 2009
Running Windows 7 Ultimate. I wanted to connect my laptop to an external monitor so I pressed "Windows key + X", then clicked "connect display", then "extend."
On most computers, doing this will allow you to output the display to another monitor.
When I did it on my laptop, the screen started flickering and became garbled. It's too garbled to see, and I can't find the mouse and undo what I've done. I tried restarting but it's still like this.
View 1 Replies
ADVERTISEMENT
Apr 29, 2009
So check out what my Dell Latitude D830 (Nvidia Quadro NVS 135M chipset) did the other day...
Any ideas?
View 2 Replies
View Related
Nov 12, 2009
I recently attempted an install of Windows 7 onto a friends PC. The specs are listed below. Here is a link to a screenshot of the problem www.ronnarozny.com.
This occurs after a Windows 7 install. The system boots to the Windows 7 setup, where personal options are selected. After this, a reboot will begin the POST, and prior to completion, this screen appears. I do not believe the POST has finished, and I do not think it is handing boot duties to the OS.
What I have attempted so far is:
Memtest - checked out ok.
Replaced CORSAIR mem with other sticks.
Reformat from command prompt on boot disk.
Removal of all hardware, including video card.
I am completely stumped on this issue, and any help would be appreciated.
View 5 Replies
View Related
Jan 25, 2013
I tried to do a routine (once a year) chkdsk via the command prompt Code: > chkdsk /r
> shutdown /r /f /t 1 . And upon the reboot, all I get is a black screen, no cursor, with ~4 rows of rainbow, garbled pixels at the very top of the monitor (certain pixels occasionally change colours). This occurs before the windows splash screen. I have left the computer as is, hoping it will eventually boot on its own with no luck. This was just a routine check. Some more information, I dual-boot with Ubuntu. I can mount and access the windows partition from Ubuntu, and I even ran ntfsfix in Ubuntu (which has some analogous functionality to chkdsk), but it didn't notice any problems.
View 1 Replies
View Related
Jul 3, 2009
I am using RC1 on an HP Mini 2140 PC with 1024x576 resolution. I just can't work out how to set the projector and screen resolutions to different values. Projector resolution is 1024x768. If I use the "duplicate screen" setting, it insists on using the 1024x576 for the projector as well. The only thing I have been able to do is to have only monitor 2 turned on, and have the correct projector resolution but nothing on the PC screen.
That defeats the effort. I want to use the PowerPoint feature that allows presenters to see speakers notes on the PC, but they are not on the projector. Second best would be to have 1024x768 on the PC screen as well, even though I would have to scroll down to see it.
Ideas?
View 1 Replies
View Related
Jan 21, 2010
I'm looking to purchase a micro projector - the AAXA M1 micro projector to be exact. This projector uses a USB to Projector connection to allow the images to be projected through the projector. It says that it uses drivers to do this, but I called AAXA and they said that Windows 7 is currently officially supported - that it may work but they can't make any guarantees.
Has anyone ever heard of a USB to Projector type of projector before? Anyone try the AAXA M1 on Windows 7? The projector looks really cool and is cheap ($299) but I want to make sure it works first...
[URL]
View 3 Replies
View Related
Oct 2, 2012
i've tried recording to roxio, the sound recorder, and audacity. i've input Internet, a zoom portable recorder and my galaxy. it happens every single time. the recording starts very clear and between 2:00 an 2:37 the output audio starts to sound garbled. i've tried everything. can someone help me? i cannot even record my southern rock band reheasal on any program.
View 8 Replies
View Related
Jul 9, 2011
I'm having the most insane issue with sounds in Windows 7. All of a sudden out of the blue it seemed like my headphones started dropping half the channels. I can hear mostly high pitched sounds but bass and especially voices are very quiet, laggy and distorted.
What's killing me is I can't find out why. I've tried different headphones, but every pair does the same thing. I've used different audio jacks (reconfigured in registry) no difference. I thought the onboard Realtek card might have had it so I bought a new Creative sound card. Exactly the same thing.
I've installed and reinstalled new drivers, codecs and anything else I can think of. I even booted into my Vista partition and the sound there is screwed too now. Have I just killed some part of the motherboard somehow?
View 5 Replies
View Related
Aug 11, 2011
My sound for my Windows 7 desktop is garbled and sometimes choppy. I install a new sound & video card (with drivers), I went thru the microsoft fix utility, but still no change.
View 8 Replies
View Related
Dec 19, 2012
i operate a 2 year old notebook using windows 7. lately the sound is broken up, (cuts in & out), sometimes garbled and slow, and at times it's ok. i have tried Internet, my own music, any sound system, seems to be bad. almost feels like the old fashioned electrical short circuit problem
View 6 Replies
View Related
Mar 6, 2012
Twitter not displaying correctly, fonts are all garbled like sticks. I have tried in firefox, IE9 and Chrome. It is unreadable in all browsers and I cannot find a fix anywhere. For Character Encoding I have all browsers set to Unicode (UTF-8) as do not recall ever changing them to anything else or seeing this problem before. All other sites show correctly. So I really am stumped. If you need my twitter page or could go see if it looks normal on your computer the address is Robbo (@aussiecriminals) on Twitter?
View 9 Replies
View Related
Oct 17, 2011
I'm having problems opening some photos in Windows Photo Viewer. Image is Garbled but opens fine in Paint.This is what shows up when photo is opened[URL]
View 5 Replies
View Related
Mar 23, 2011
I am about to buy a projector to use as my TV, and I would like to use the projector as a second monitor on my windows 7 PC. What I would like to be able to do is watch TV from my tunercard, or movies from DVD and Blueray drives etc, on the projector, but retain the ability to browse or whatever on the main screen.I have been told that you cannot maximize the video in the second screen(projector) and still have access to the main screen with the mouse. Is this true? If so is there a workaround?
View 2 Replies
View Related
Oct 24, 2009
I would like to find out if there is a setting that will allow me to sleep my dekstop monitor but not my projector? I am running the projector as an extended display. I do not want to connect just to projector and have my desktop displayed via the projector.
View 0 Replies
View Related
Aug 15, 2011
i got an aaxa m2 projector and im not sure how to hook it up to my computer with windows 7. In xp i know how change the settings to i can have an extended desktop, or duplicate desktop which the projector then acts as a 2nd monitor but in windows 7 im not sure.. Is there some hotkey combination that lets me toggle through the settings?btw projector is pretty nifty! all the more reason i need to figure out how to get it to work on my laptop not just my desktop.
View 4 Replies
View Related
Jan 3, 2012
When my DELL laptop is already running and I connect a DELL projector, using the keys Fn+ F7 to transfer the screen on the laptop to the projector does not work. To connect the laptop after connecting the cable to the projecter I have to reboot each time.
View 1 Replies
View Related
Oct 23, 2012
I recently upgrade my hp pavilion dv2000 to window 7, unluckily my laptop can not connect or detect to projector anymore
View 1 Replies
View Related
Jun 2, 2011
I've came across a problem where one of our clients chooses projector only so he can have his desktop on a monitor rather than his laptop, when he does this the laptop restarts then asks for admin creds... it's a sony vio laptop, i can't see anything online about this, and his is the only mechine that does this.
View 1 Replies
View Related
Sep 2, 2011
how to connect a projector to a computer using a vga cable
View 1 Replies
View Related
Sep 2, 2011
how to connect a projector to a computer using a vga cable
View 1 Replies
View Related
Nov 7, 2011
have to re-install win 7 when i upgrade my cpu and motherboard?
View 2 Replies
View Related
Aug 8, 2012
Ho can I connect a 32 bit windows 7 asus to a projector and have diaplayed on both the projector and the monitor? Fn F8 only dosplays on either one of them but not simultaneously.
View 1 Replies
View Related
Oct 7, 2012
I have HP Ultrabook with Windows 7. It does not detect project when connected for presenation. Which driver and from where should I download?
View 2 Replies
View Related
Oct 7, 2012
My HP Ultraook with Windows 7 does not dtect projector. What drivers and from where to download?
View 1 Replies
View Related
Feb 8, 2012
I'm having the above mentioned problem with my father�s laptop.He's a teacher so we bought the laptop so he could show powerpoint-presentations on projector, but the laptop doesn't work with all projectors.The output is received by the external screen/projector but the projector doesn't realize that there is input. In the classroom that my father teaches this spring the projector will for like 5 or 10 seconds show the pc-screen and then turn off.We have a Sony-TV with VGA-plug so I tried connecting the laptop to our TV (different cable and different �external screen�). When I connect the cables, the TV doesn't automatically realize that there is a computer-input. But if I force the TV to show the "VGA-channel" the computer screen is shown perfectly on the TV. I believe the problem is similar on the projector, i.e. the screenpicture is sent trough the cable, but there's no "information" that there is a picture. To test if the computer receives information on the cable I tried the setting that the screen should only be seen on the external screen. As soon as I plug in the cable to the PC the screen goes blank, so the PC recognizes the cable.From PB's support homepage I tried installing/reinstalling the video-driver but unfortunately it didn't help.
(VGA AMD VGA Driver (Radeon HD 6650M) 8.783.2 130.3 MB 2011/01/20)
View 6 Replies
View Related
Mar 17, 2012
I'm experiencing the following problem with my new Sony Vaio VPCSB3L9E/W, but I don't know the exact model projector because it is in a classroom, shield in a box on the roof.Well, whenever i connect my laptop using the commonly known Win + P the mouse pointer freezes. The keyboard is active and using the arrows I can send signal through the VGA port. The same happens with Fn + F7 shortcut.Has to do anything with the resolution ?Is there any short-cut to re-enable the mouse if it is somehow disabled ?
View 5 Replies
View Related
Jun 5, 2012
I have ASUS tablet with Windows 7. I use USB to VGA converter to connect to VGA projector. It used to work until June 4 at 5:30PM PST, when it stopped working during presentation. Before that it worked for 4 months. Looking at control panel adjusting external display if I select duplicate to projector I only get my computer display. It says it does not detect external display.
View 1 Replies
View Related
Dec 23, 2012
Following a Windows 7 update my laptop would no longer recognize my projector, which it had been doing for some years and immediately prior to the update. I also find that my laptop now no longer recognizes my monitor, which again it had been doing for some years. Different cables are used so it is not a cable problem. I have been through all the obvious things and have looked for updates to the graphic driver, but no better updates available.When I plug either of these items in to my laptop the screen resolution on my laptop changes as if it is recognizing the additional hardware, but in neither case is anything displayed on the remote device.
View 2 Replies
View Related
Mar 23, 2011
determine what is causing my laptop to BSOD after a few minutes of inactivity while connected to projector. Attached is the dmp file.
View 1 Replies
View Related
Oct 20, 2011
I have installed the software kaplan and when i try to run it, it say that macromedia projector has stopped. what should I do to solve this?
View 1 Replies
View Related
Aug 17, 2009
When I press "Connect or Disconnect", it pops up an infobox saying "You are currently connected to: xnetwork"
However, there is no option to disconnect from the network. This is extremely frustrating; apparently I'm blind, but I've tried disabling and re-enabling the adapter to no avail.
Windows 7 x32, btw. (desktop, in my profile)
View 9 Replies
View Related