i've tried recording to roxio, the sound recorder, and audacity. i've input Internet, a zoom portable recorder and my galaxy. it happens every single time. the recording starts very clear and between 2:00 an 2:37 the output audio starts to sound garbled. i've tried everything. can someone help me? i cannot even record my southern rock band reheasal on any program.
View 8 RepliesIn the past, I used to record music from Winamp with Streamstripper. It does not work in Windows 7.
View 3 Replies View Relatedi can't seem to figure out how to use any program to record my computer speakers...in other words i want to record the audio of this Internet video because it has epic music i can't find anywhere else. when i use the pre-installed programs "sound recorder" no sound actually records. when i use wmm i cannot choose audio mix, only realtek high definition line in or something like that.
View 9 Replies View RelatedBack in the day, most mics sounded awful and your only alternative was usb mics. However, newer motherboards seem to have better onboard mic (less noise) and any old headset will do.the motherboard I have is an asus P5KPL-CM it's onboard audio is:
VIA VT1708B 8 -Channel High-Definition Audio CODEC
and its chipset:
Intel G31
Intel ICH7
In windows xp, audio capture was fine. I primarily use the mic with online gaming and was really happy with how well the onboard sound recorded. Very clean, little noise. In game people said my mic sounded great and tests showed that.Went to windows 7 recently, everything is great except the mic recording is also capturing what audio output is going on (ie. the game's sound as well) I played with the nixer settings to death and can't seem to prevent this from happening. All games do it, windows sound recorder, audacity etc.I noticed there is a stereo mix tab and it has it's own recording volume which I have as muted and its recording level down to zero. This is with the front mic port but I've tried the back and same thing. This isn't an expensive headset, but again it worked great in xp. If the cables were gone it would be scratchy, not pick up the audio output. But I have a backup of this headset and tried it but the same thing.I don't have the speakers plugged in, but thought maybe the headset was 'bleeding' somehow and the mic was picking it up, but with just the mic plugged in alone it still records the audio output of whatever is playing, so it's not somehow picking up what's coming out of the headset itself.
I'm quite puzzled with this problem. I'm trying to fix a microphone to my PC (Control Panel > Hardware & Sound > Sound > Manage audio devices) and try to configure the "Recording tab". In the tab, the message says "Realtek High Definition Audio Not Plugged In".
View 1 Replies View RelatedI understand without being in some sort of perfectly quiet environment/home studio, nothing can be perfect.That aside, I recently purchased a new USB condenser mic (cardoid) and it can pick up all sort of sounds from my keyboard typing, mouse clicks, and my PC fans. My PC is positioned about as far as it will go without pulling the plugs out. It might also be worth noting there are no speakers on my PC. I've also read there is supposed to be a Microphone Boost in my recording settings as well as a Microphone Enhancements tab? There never has been, on any mic I've used on my PC. And it's been suggested that this might be a possible fix, but I'm sort of doubtful on that.I've been thinking of investing in more audio equipment (shock mount, scissor arm, pop filter?) or perhaps returning it for a different mic altogether.
View 6 Replies View Relatedso i have a blue yeti, and i'm an online animator/voice actor. whenever i record audio on my blue yeti (or any other mic) i record about 4-6 inches from the mic, and turn the gain down enough that the audio doesn't peak as i yell or whatever. this is what you're supposed to do if you don't want your audio levels peaking and making your recording sound horrible and corrupted. however, afterwards, it means i have really quite recordings. not a problem right? now that it's recorded right, i can boost the volume of the entire clip afterwards right? wrong. i'm not an audio expert so i must be missing something. but why in gods name would the audio distort and peak after it's recorded successfully? it's all there, it's all clean audio. if i turn the volume on my speakers all the way up it sounds crystal clear! all i want to do is do that inside the computer so that when i upload it to Internet people don't have to turn their speakers so far up. but if i increase the clips volume in the computer, it distorts! it sounds awful! why?! i tried in sony acid and audacity and they both do the same thing! i can take sound effects, and recordings made by other producers and crank them up nice and loud, but mine just fall apart!
View 2 Replies View RelatedMy motherboard has on board audio which I disabled in my bios in order to use my recording sound card. This worked flawlessly for over 2 years. Then sometime last year Windows installed my "Missing HD Audio Driver" which disabled all sound until i enabled the on board sound in the bios again, this of course meant i couldnt use my recording card.ll Windows and driver updates have been turned off, it still installs.After many attempts at fixes i found online I gave up until more recently when i reformatted the computer and got it working. Then yesterday it started again
View 1 Replies View RelatedMy audio on my laptop is dragging when i am playing music or music videos on it or any videos for that matter. What do i need to do? Is there maybe something i need to download to make the audio play better?
View 3 Replies View RelatedI have Windows 7 Home Premium SP1 and there seems to be a problem with my computer's sound recording system.I want to record music off of the Internet,I have Replay Music,recently the program was working,now it decides to quit.I have the Replay Music software program set at Audio Driver,I tried to uninstall and then re-install it,but,nothing wants to work.
View 3 Replies View RelatedSo check out what my Dell Latitude D830 (Nvidia Quadro NVS 135M chipset) did the other day...
Any ideas?
Running Windows 7 Ultimate. I wanted to connect my laptop to an external monitor so I pressed "Windows key + X", then clicked "connect display", then "extend."
On most computers, doing this will allow you to output the display to another monitor.
When I did it on my laptop, the screen started flickering and became garbled. It's too garbled to see, and I can't find the mouse and undo what I've done. I tried restarting but it's still like this.
I recently attempted an install of Windows 7 onto a friends PC. The specs are listed below. Here is a link to a screenshot of the problem www.ronnarozny.com.
This occurs after a Windows 7 install. The system boots to the Windows 7 setup, where personal options are selected. After this, a reboot will begin the POST, and prior to completion, this screen appears. I do not believe the POST has finished, and I do not think it is handing boot duties to the OS.
What I have attempted so far is:
Memtest - checked out ok.
Replaced CORSAIR mem with other sticks.
Reformat from command prompt on boot disk.
Removal of all hardware, including video card.
I am completely stumped on this issue, and any help would be appreciated.
I'm having the most insane issue with sounds in Windows 7. All of a sudden out of the blue it seemed like my headphones started dropping half the channels. I can hear mostly high pitched sounds but bass and especially voices are very quiet, laggy and distorted.
What's killing me is I can't find out why. I've tried different headphones, but every pair does the same thing. I've used different audio jacks (reconfigured in registry) no difference. I thought the onboard Realtek card might have had it so I bought a new Creative sound card. Exactly the same thing.
I've installed and reinstalled new drivers, codecs and anything else I can think of. I even booted into my Vista partition and the sound there is screwed too now. Have I just killed some part of the motherboard somehow?
My sound for my Windows 7 desktop is garbled and sometimes choppy. I install a new sound & video card (with drivers), I went thru the microsoft fix utility, but still no change.
View 8 Replies View Relatedi operate a 2 year old notebook using windows 7. lately the sound is broken up, (cuts in & out), sometimes garbled and slow, and at times it's ok. i have tried Internet, my own music, any sound system, seems to be bad. almost feels like the old fashioned electrical short circuit problem
View 6 Replies View RelatedWhen listening to music on my PC, it does not matter if I use Winamp, Songbird, Quicktime, Windows Media Player, or any other software. Every so often, there appears some sort of distortion, like the drive that the music is on slows down. I dont know if it is the driver or what. Its hard to explain. You have to hear it. I dont think its the mp3 file itself, cause I could play a song and it will be perfect, but then the next time I play it, it will distort. It is really driving my nuts cause I can't find the reason for it.
View 9 Replies View RelatedTwitter not displaying correctly, fonts are all garbled like sticks. I have tried in firefox, IE9 and Chrome. It is unreadable in all browsers and I cannot find a fix anywhere. For Character Encoding I have all browsers set to Unicode (UTF-8) as do not recall ever changing them to anything else or seeing this problem before. All other sites show correctly. So I really am stumped. If you need my twitter page or could go see if it looks normal on your computer the address is Robbo (@aussiecriminals) on Twitter?
View 9 Replies View RelatedI'm having problems opening some photos in Windows Photo Viewer. Image is Garbled but opens fine in Paint.This is what shows up when photo is opened[URL]
View 5 Replies View RelatedI tried to do a routine (once a year) chkdsk via the command prompt Code: > chkdsk /r
> shutdown /r /f /t 1 . And upon the reboot, all I get is a black screen, no cursor, with ~4 rows of rainbow, garbled pixels at the very top of the monitor (certain pixels occasionally change colours). This occurs before the windows splash screen. I have left the computer as is, hoping it will eventually boot on its own with no luck. This was just a routine check. Some more information, I dual-boot with Ubuntu. I can mount and access the windows partition from Ubuntu, and I even ran ntfsfix in Ubuntu (which has some analogous functionality to chkdsk), but it didn't notice any problems.
I am using a third party music player, MusicBee, to play my music, however if I select a folder in windows explorer of an artist that has more than one album in sub folders under the artist name then the "PLAY ALL" button does nothing.
If I select a folder without sub folders inside the PLAY button works fine and open MusicBee to play the music.
I also have VLC installed and if I right click on any music folder I get the Play with VLC option, how can I add this same option for MusicBee.
im having trouble with my headphones mic which from some reason recording volume is very low . so low that in game (by using TS [teamspeak]) when other people have the game sound , they can bearly hear me. i set my mic to 100 volume and the boost to +30db but thing stay the same.when i test the mic with recorder the bar even dont rised a little bit .ohh , and by the way , in case anyone thought the problem isnt in the mic which is new due to the fact that after this problem happend at the last microsoft headphones i had, i bought new one (forgot the model).
View 4 Replies View RelatedI want to record sound of a video playing and save it as a wav file . How can I do this the best , before in XP i used the voice recorder in windows , but now when I run the video and click record , nothing gets recorded. How can I live record from within the computer, I am not looking to record from the speaker. I know it's possible just not sure on the settings. I have Creative X-Fi soundblaster and I don't know how to go about capturing the audio to wav file.
View 1 Replies View RelatedIE9 has stopped recording my internet browsing history. Instead it only records my computer document history, like any saved pictures I open or any documents I openDoes anyone know why its done that and how I can put it right?
View 1 Replies View RelatedI wish to record iPlayer to DVD and have seen a software called 'Replay Capture Suite'. Is this the best around or do you know of others that are better? I have PC with OS Windows 7 Ultimate.
View 1 Replies View Relatedi want to record a short sound that is present on a website for a ringtone, but i can seem to get the sound recorder on W7 to "see" any type of recording device so i can record directly form the sound-card (onboard).url...the issue is i am not seeing the "Wave out Mix Device" that is supposedly disabled by default.
View 2 Replies View RelatedI am having a problem on recording my screensaver, whenever I use screen recording programs such as Camtasia Recorder or Snagit and open the preview or open the .scr file, it don't record the screensaver instead it record the desktop! So what should I do to make the program record my screensaver? Is there a program to convert .scr to .mp4 or .avi or any video format?
View 3 Replies View RelatedI was wanting to know what recording program would be best for recording games I don't mind if I have to pay but I'd rather it to be free if possible?
View 4 Replies View Relatedi am trying to record some game play for a Internet channel and i keep getting lag spikes on 1 game. when ever i play league of legends i always will have a frame rate drop. i usually get around 120-90 fps without recording and 60-40 fps with recording but for some reason there will always be a drop to around 1-10 for about 2 secs.
View 9 Replies View Relatedwhen i record screen with any screen recorder (camtasia,camstudio) it records slow choppy, especially when i drag windows they move at 5 fps , it flickers. all in all is too slow. I have the same issue on 3 different computers. one with p4, one with core 2 duo 2.8 ghz with 9600 gt 4 gb ram, and on a q9500 ati 4770 4 gb ram. the same results. I believe it's windows 7, coz this is impossible. the same thing happened with windows vista, but they record fast in windows xp , even on my p4 machine. all computers record the same on windows 7. Do not tell me to adjust the setting coz i will laugh at you. I been douing that for 3 years. camtasia forums and support are not helpful. their products sucks.or can you recommend a different program (free or trial)?
View 3 Replies View RelatedIt would seem that 7MC won't utilize both tuners when recording back to back programs on the same channel. What it will do is use one tuner and cut off the first program and start another recording. Its really not apparent when there is a 6 minute commercial break between programing, but it is apparent when one program ends and the next starts right up. I have played around with the "padding" under recorder defaults and have set them to 2min before and 2min after, going as far as 10min before/after trying to force the thing to switch tuners and nothing works. It simply cuts short to first program by 10mins.
I've tried playing with the "priority" settings and it seems to me that "priority" has no effect whatsoever. I've tried going into the "series settings" and having it end 5min after without the "when possible". It would seem that the "recorder defaults" over rides the series settings. I am quite sure the 2 tuners are configured correctly because I had to set them up with 2 stb and IR blasters and I can start a manual recording on channel 269 and then watch channel 5. It simply won't tune both tuners to channel 5 simultaneously. I don't remember having this problem with XP or Vista. My tuners are Happage 1850 hybrids PCIe 1x with just the analog tuners having signal. The HD broadcast tuners are open.