When I press "Connect or Disconnect", it pops up an infobox saying "You are currently connected to: xnetwork"
However, there is no option to disconnect from the network. This is extremely frustrating; apparently I'm blind, but I've tried disabling and re-enabling the adapter to no avail.
Windows 7 x32, btw. (desktop, in my profile)
I'm trying to transfer between my Desktop computer (XP) and laptop (Windows 7). When I do it wifi it only transfers at speeds between 1MBs to 3MBs. When I physically connect to my router I get better speeds at 10-11Mbs. However in both cases on large files it loses connection.It says that connection lost/failed and gives me option of retry/skip. When I hit retry it still doesn't work. When I disconnect and retry that method it starts up again from scratch however rarely does it fully transfer a file. These files are anywhere from 2GIGs to 4GIGS.I don't have anti-security on either computer. I'm using new Netgear router.
View 2 Replies View RelatedHow do I disconnect a Roku XDS from a wireless , not wired, network?
View 4 Replies View RelatedI use Windows 7 Pro on our company LAN. I had to connect temporarily to another computer on the LAN to access some file shares there. Now I would like to disconnect. I haven't found any way to do this.
View 1 Replies View RelatedCan java utilizing over 80% of cpu cause intermitant network disconnects?
View 2 Replies View RelatedHow to disconnect a mobile user in wireless network?
View 4 Replies View RelatedI have a network storage drive that has seen its last day but I still have the icon under my computer when I try to disconnect from it it tells me the drive does not exist.
View 1 Replies View RelatedSince doing a clean install of Windows 7 my internet keeps timing out. The icon in the task bar shows that it's normal, but I'll be online and after a couple minutes the internet just stops. When I click on the icon it says "connected" and "internet access."I have tried on both a Netgear and Apple router, so it's not a router issue. I reset the modem and routers a dozen times. I called my ISP and they said everything looks normal. My Droid phone works fine and so does a Macbook in the house.I have rolled back my Atheros5007 wireless card driver, which did nothing. And then tried upgrading the latest version, which did nothing. Uninstalled the driver then reinstalled, still with no luck.I was running Windows 7 fine all year and did the clean install as something I do every year to keep my computer running well.
View 9 Replies View RelatedWhy is it that so many Western Digital products suck at what they do? Every time I tried using a storage device by WD it's been acting up. One time a drive wasn't even being detected by a computer (or other computers I've tried it on) and now this new 1 TB external drive is not wanting to disconnect safely from my laptop. I did a ton of searching online and apparently, despite it not actually saving anything it's still running processes as if the person who made it assumed you don't ever want to disconnect it from your computer (which is stupid for the fact one shuts off his computer eventually at one poine) and instead want to constantly back up weekly. I made one backup and that's all I want to do at the moment. I also want to shut off my computer, but if I do that while I still get the error message "can't disconnect external drive since it's still in use", wouldn't shutting the computer down then be equivalent to unplugging the drive before it's "safe" to remove? I literally waited a full day to get my 350 GB info on this drive, and I don't want it to get corrupted through unplugging or even shutting down the computer when the drive is "still in use".By the way, it says it's "in use" but I am NOT seeing it download or backup anything (because I already finished this hours ago). Could it be that it's saving something that I'm not aware of? Or is it simply "connected" to my computer and that is one of WD's definitions of "currently in use"? If the latter is true, I guess logging off/shutting down won't do anything then, but I'd still like to be sure.
View 7 Replies View RelatedInternet disconnects after using for sometime on my computer . The network icon on the task bar shows no Internet access.When I disabled the network adapter, but when I tried to enable it, windows just shows me the enabling window but nothing happens. So I had to restart the system but it also got stuck at he shutting down screen.So when I booted the system after a force shutdown, the network adapter was enabled but the same problem happened after some time. My modem auto connects to the Internet service so I do not dial for connecting to the Internet. I use the same modem to browse Internet from my iPad and the Internet works on the device.Recently installed a driver for a USB data card.
View 7 Replies View RelatedI have a wireless printer which has been working fine. Now although everything is conected my printer has decided not to acknowledge it. I have to put the USB cable in to print. I have now uninstalled the printer ready to re-install it, but I don't know how to disconnect it from the internet.
View 4 Replies View RelatedRunning Windows 7 Ultimate. I wanted to connect my laptop to an external monitor so I pressed "Windows key + X", then clicked "connect display", then "extend."
On most computers, doing this will allow you to output the display to another monitor.
When I did it on my laptop, the screen started flickering and became garbled. It's too garbled to see, and I can't find the mouse and undo what I've done. I tried restarting but it's still like this.
I am trying to upgrade the hard drive which has my operating system on itI disconnect all drives except the one which has the operating system and the new drive which will replace the old one.I use Norton ghost to copy from the old to the new but when i connect the new drive only it does not boot into windows.I beleive i have to make the partition of the new drive as active but at what stage do i have to do this?
View 4 Replies View RelatedMy external HD has crapped itself, and while trying everything to bring it back, I am going down the track of wondering if its a .pst issue and want to disconnect the .pst file from outlook so it doesnt try to connect to the HD, in hope that the HD will come back however I cant open outlook to do so. How can I disconnect the .pst without opening outlook? Im using outlook 2010, Windows 7 professional.
View 1 Replies View RelatedI have ADSL connection, i use WiFi enable adsl router (ZTE ZXV10 W300) for share that connection internet connection with my home other devices. My ADSL internet connection not disconnect but my WiFi connection drop most of the time.
View 3 Replies View RelatedStill showing up under My Computer. Anyone else have this problem? Suggestions?
View 2 Replies View RelatedI am home user running Windows 7 professional and have mapped a network drive (Y that points to a folder on a LaCie NAS on my LAN. When the mapping was setup, the "Reconnect at Logon" option was selected.
Now I want to permanently disconnect that mapping. I have tried:
1) Disconnecting in Windows Explorer
2) NET USE /PERSISTENT:NO
3) NET USE Y: /D
The drive disconnects no problem, but when I login again, the mapping is back. How do I get rid of this mapping PERMANENTLY?
My external usb hds and my keyboard disconnect randomly
View 4 Replies View Relatedi am connected to the internet but suddenly the yellow icon apprears and i get disconnected and then have to disconnect the wi-fi again and connect it back. Then it starts workin.
View 14 Replies View RelatedHow can I have a USB port automatically disabled upon device disconnect?
View 1 Replies View RelatedI am trying to use WLM RA to connect to another W7 PC. Occasionally it works OK but usually when I accept the invite WLM disconnects me and brings up a box telling me it will reconnect in X seconds. If I keeping getting the other PC to send invites it might eventually work but it may take 50+ attempts, sometimes I just give up.
View 3 Replies View RelatedI have three computers, one desktop (what my listed specs are for), a laptop, and a netbook. Each are running some version of Windows 7 (Ultimate x64, Home x64, Home x86). On each computer, if I minimize a connected AIM, Yahoo, or MSN account.. Also any Telnet connected windows/Telnet based platforms that are currently connected to a server.. After a good 2-4 minutes of being minimized, all programs are disconnected. At first I thought it was an internet problem, but that isn't the case (program(s) run fine without any hiccups as long as its an active window).
View 2 Replies View RelatedCan I still print to the wireless printer if I disconnect the Homegroup? I do not wish to share files and see no point in joining a Homegroup.
Would removing the Homegroup cause internet connection problems?
I've run into problems installing OpenVPN in the past on Windows 7, but my normal fixes don't seem to work on this box. I have other Windows 7 nodes up and running OpenVPN, but none specifically on a Pro x64 box (if that even matters,) so I hope it's possible. My problem is once OpenVPN is installed, it's GUI doesn't give me an option to 'Connect' when I right-click the tray icon. Normally, there are options to Connect, Disconnect (grayed), Edit Password, View Log, etc.
Normally, I can take ownership of the OpenVPN program folder and that takes care of this precise problem, but not this time. In other versions, the GUI can be run in Vista compatability, or just run as administrator. But, this one still doesn't work. There's at least one event that manifests when the GUI launches.
Event ID: 1001
Fault bucket , type 0
Event Name: PCA2
Response: Not available
Cab ID: 0
OpenVPN does install a TAP Win32 Adapter whose drivers sometimes produce the 'are you sure you want to install this driver?' dialog.
My daughter can only get dialup connection, which gets expensive. On her old laptop, (now defunct) running XP, with built-in modem, this was no problem; she simply right-clicked the taskbar and chose "disconnect". Her new laptop, running Windows 7, has no modem, so I got a USB one for her - it connects effortlessly, but we can find no way of disconnecting it and carrying on working offline, except by physically unplugging it, which seems a bit inelegant if nothing else.
View 11 Replies View RelatedI am unable to remove my external hard drive it says I have programs open and I do not
View 1 Replies View Relatedmy ethernet will disconnect randomly while i'm doing anything on it. when the first time it disconnect, i need to press the "scan for hardware changes" to fix it, disabling and enabling the network adapter results in a code 10(device cannot start). then, windows install a new adapter named "realtek pcie gbe family controller #2". after this if it disconnect again, it can be fixed by disabling and enabling it.also, when playing a flash game, the adapter disconnect very often, about every few minutes compared to a few hours if not. when watching a video on Internet, the same thing happens but clicking another video on the sidebar cause it to disconnect immediately.when starting any online games, it also cause the ethernet to disconnect. but this time, the light on my router goes off as soon as the game loads for ~5 seconds before coming back on (note that when not playing a game and it disconnect, the router light never goes off), but i still can't use the internet (windows shows a red x on the network logo).sometimes i would have to reset the ethernet adapter 3~4 times before it works again.
using asus p7p55d-e pro, and it searching on google it seems that quite a number of people using an asus mobo gets random ethernet disconnect.i've tried reinstalling the drivers, used a different router, changed settings in the adapter (switched the settings one by one).this started happening about 1 week ago, and it seems to be getting worse, the frequency of the disconnect is getting higher.it seems that when it disconnect while i'm loading a page, it will keep loading for minutes until i disable the adapter, which it then displays an error.
With my recent purchase of my new Windows 7 computer I added a fluorescent light above my workstation. Its around 21" long and mounted about 3 feet above my monitor and PC. Sometimes when I first turn on the light I hear the "bong-bong" sound of the device disconnect sound from the PC. This does not happen every time but I would say about 60% of the time it happens. I do not see any indication than something actually "unmounted" but this does have me stumped. I know a fluorescent light does put out a frequency but I have not heard of anything like this. I have stopped using the light for not until I can figure out if it is actually interfering with anything.
View 4 Replies View RelatedI have a PC I assembled last June. After I loaded it up with my applications and connected my devices I began getting device disconnect sounds as well as a few device connect sounds. I've been troubleshooting by disconnecting all devices then adding devices back one at a time to try to find the culprit. I'm not getting consistent or convincing results so far, but will keep working on that approach.
A Web search on the subject returns lots of results where users are experiencing these sounds. Answers are sparse. And antagonizing! I have not found any hints as to how to extract from the system what is actually happening. What I am looking for is if anybody knows where in the system I can find a log that records device connect/disconnect events associated with these sounds.
CASE Cooler Master HAF 912 RC-912-KKN1 Mid Tower
MOTHERBOARD ASUS P8P67 Deluxe LGA (P67 B3 Rev)
CPU Intel BX80623I72600K Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost)
[Code].....
I always used "switch to other user" when I left my laptop behind for a while (i.e. when I was going to sleep or leaving the house). As I never turn off my laptop (barely never), the point is that I don't want to get people to use my laptop without my permission browsing through my files etc. It's not like I've got something to hide, I just don't want it.
It used to work before, without making the internet disconnect. I made sure that Windows is not configured to turn off the network card when idle for some time.
Whenever I use Live Mesh, it locks the computerand quits Windows Media Center. Is there anyway of setting it so that I can log out with WMC running and the computer unlocked?
View 1 Replies View Related