Windows 7 - Connecting To Shared Drives On Network
Feb 26, 2012
I have 2 windows 7 computer on a wireless network in my house. Basically I want to be able to share the drives on both computers so that i can stream media between the computer and also devices in my home (xbox360). I went to set the drives to shared in the properties for the drives on both computers, however, whenever I try to connect to the other computer through the network section I got this pop up asking for a password, I tried login passwords and no go. So I went into the sharing options and turned off password protection and it seemed to let me through, and i can see the drive i named and setup, only now when I try clicking on the drive I shared it says (windows cannot access//Name of Folder). How do I get this to work?
ok i have a home network set up on 2 pcs with win 7 64bit
i have set up shared drives on both pcs ,, i have set the permisions on the shared drives so that everyone can do whatever they want change files delete files ect
so i expect to be able from one pc to cut files and paste to the other but i cant ,,, i cant even copy from one pc to the other unless i do it from the pc that is going to have the file added
I have an intermittent problem with networking my desktop machine to my laptop. Sometimes after I hibernate my laptop and then wake it up, I am unable to access my shared drives on my laptop from my desktop. I am always able to go the other way (access shared drives on desktop from laptop. When it does this, even reboots of both machines don't help.
I just asked Windows 7 to diagnose and I get this. Usually after "messing" with the network settings, log offs, reboots, who knows, it usually starts working both ways again until some later hibernation restart of laptop. I wish I could pinpoint some common things that cause it but I just can't figure it out. Any ideas?
XP SP3 is used. The Simple File Sharing is not enable.Ping from Windows 7 to XP goes through.The same log-on user name and password are used for XP and Windows 7.XP machine is visible from Windows 7.Error message is "Unknown user name or bad password. The same message when attempting to access from another Windows 7.Initially it was working but after an hour or so, it quits. I rebooted the router, XP machine and Windows 7 machine but the situation remains unchanged. There is no problem networking between the two W7s.
3 computers, DT1 (Desktop running XP Home w/uptodate patches), LTJ (laptop running Windows 7 home premium w/uptodate patches), LTR (laptop running win 7 home premium w/uptodate patches). Both laptops are HP/Compaq. Only difference is built-in wireless cards are different. I�ve tried wired connection as well. Shared a physically connected printer on DT1 Used the "create local port" option on LTJ and was able to connect just fine Used the "create local port" option on LTR and received error 0x000004cf I've tried every hint I can find (short of doing a system restore and purchasing "fix-it" software) but the problem still exists. I can ping DT1 from both systems using DT1s name and IP address I set the workgroup on all systems to "WORKGROUP" Both laptops are in the same Homegroup and can see each other LTJ can discover DT1 but DTR cannot
I have two computers running windows 7 in a router LAN. One of the computers have several external drives connected to it. I have shared the drives successfully over the network and the settings remain saved so that I don't have to reshare the drives everytime I log in.However, three of the drives remain unshared after a restart or reboot. Why is that? How can I keep the shared settings for these drives also?
Ok has anyone experienced this, I have 3 drives shared from windows 7 RTM, to windows 7 7100. everytrhing works ok ubtil I try to move, copy a file from one system to another. This makes my windows 7 rtm version loose it's network connection completely, I have to run the diagnose wizard and then it's ok. I can see and browser the folders for a week no problems.
As soon as I try to copy or move a file over the network I kills my network connection only on the windows 7 rtm system. All the other computers in the house are ok. I have one system running linux and 4 others running the windows 7 7100 build that can share and get online with out any issue's. Please let me know if you have experienced this.
I'm running a Windows7 Home Premium 32bit on a desktop and want to share its drives with the network. The desktop is LAN connected to the Wifi router and has no issues. If I LAN connect to the router with a laptop, I can access the desktop shared drives but I want to be able to access them via Wifi on a laptop. The Laptops have no problems accessing internet through wifi but will not see the shared drives on the LAN via Wifi and I have to plug in to the LAN.I thought I'd cracked it as Kaspersky had the home wifi network down as public and I did have access via wifi for a short time, but it soon disappeared.
A week ago I had to reinstall Windows 7 on a second PC (PC2) which now has an SSD. However, the original disk (a 500GB Seagate) has been used to reorganise partitions of which there are now eight. Three of these I can access from PC1 with no problem. However, the last four plus a 1TB drive there is no way I can access them - I can look at them but there's no way I can copy any files or folders to them.I've checked the drive permissions via the Security tab and set everything I can to Full Control. However, out of the five there is one Name I cannot change and that is CREATOR OWNER which has permissions set to Special and which so far I've found no way of changing. In relation to the Names they are a little different to mine. All five are the same except that PC2 has CREATOR OWNER. I have Authenticated Users that PC2 doesn't have; none of PC2's drives have an Authenticated Users entry. Should it?
To clarify the Names we both have they are listed below:
PC1 Administrators (Username/Administrator) Authenticated Users Everyone SYSTEM
[code].....
I've just checked a third PC we have upstairs and that is different again most drives ONLY having Everyone with only one drive having the Names above under PC1 but NOT Everyone. So I suppose that makes me one confused chick. What the hell gives with the Names Groups? What should I have and what should I NOT have or not need?
I am home user running Windows 7 professional and have mapped a network drive (Y that points to a folder on a LaCie NAS on my LAN. When the mapping was setup, the "Reconnect at Logon" option was selected.
Now I want to permanently disconnect that mapping. I have tried:
1) Disconnecting in Windows Explorer
2) NET USE /PERSISTENT:NO
3) NET USE Y: /D
The drive disconnects no problem, but when I login again, the mapping is back. How do I get rid of this mapping PERMANENTLY?
I have a windows 7 pc that is part of an office network along with about 5 other machines. They are all supposed to connect to a server via network mapping of the server's shared folder. (In this case the mapping is Z:\pi-serverdata and the server is running 2008 R2 on a workgroup). Upon reboot, all systems but one will remap to this drive with no problem.
The one machine will always boot up with the message 'Windows could not reconnect network drives' The mapping is showing in windows explorer but there is a red 'x' icon showing the connection is lost. When I click on it, it prompts for windows credentials, which I enter and then it remaps with no problems. However upon next boot the same thing happens again. No matter what I try I cannot get the system to retain the credentials.
What I have tried so far: 1. Ensuring that there is a match of user names and passwords on the server and workstation. 2. Deleting the mapping and re-adding it. 3. Running a batch file to delay the mapping in order for windows to finish connecting the network first.
I would like to be able to browse to the network folder via network discovery through the workgroup but this particular machine does not have the server show up in the network listing (all other machines do show the server). Plus when pinging the server, it insists on responding with ipv6 unless I force a v4 ping...not sure it's relevant.
On this network there are three Windows 7 machines and two Windows XP machines. One of the Windows 7 machines is acting as a server providing all the other computers with shared folders that they network to via the "map network drive feature". The two Windows 7 machines connect to this central Windows 7 machine no problem. But the XP machines will sometimes lose connection to the network drives when accessed. They cannot see the network drives until the central Windows 7 computer is restarted. The other two Windows 7 machines have no problem connecting, even when the XP machines are having problems.
I found this article and wanted to check here to make sure it was applicable to my situation before I go ahead and muck around in the registry: Mapped Drive Connection to Network Share May Be Lost Problem is, the article says this: Quote: On a computer that runs one of the versions of Windows that is listed at the beginning of this article... There aren't any versions of Windows listed anywhere in the article, or none that I can find. In addition to that, it doesn't specify whether I'm supposed to be doing this on the server end or the client end. I would assume the client end but it's just another thing I want to make sure of before I go ahead and do it.
I've set up a dual boot with XP and 7. My mapped drives work fine under XP but on 7 they fail to reconnect at startup. I have made sure I ticked "Reconnect at startup" and I have switched on "Always wait for network at computer start up and logon" in Group Policies but still no good. Any suggestions?
I have a new HP8710W laptop that originally had Windows XP Professional installed from the factory. I just received my Windows 7 Professional 32 bit upgrade kit and have installed it on my computer
I also have a Desktop PC that is running Windows XP Professional.
Prior to installing Windows 7 on my laptop I was able to see the shared folders on HP8710W laptop while running the Windows XP Professional operating system. I would like to be able to access the shared files on my Desktop computer that is running Windows XP Professional with the HP8710W laptop that is running Windows 7 Professional 32 bit. I am a novice when it comes to networks and would appreciate any suggestions on what to do to get this to work.
I anticipate installing Windows 7 on my desktop in the near future but have not done the conversion as of this date.
I would appreciate some step by step instructions if they are available and not too much trouble to pass on to me.
I am running a TRENDNET TEW-432BRP wireless router H/W:vDl.OR
I have two computeres set up in an offline LAN with a 4 port switch connected to a router. One is a server with 4 shared 1TB drives. The other is just a works station. Both computers are running windows 7 ultimate x64. My problem is that 1 drive which I've label as Z: keeps disconnecting in the workstation. When I check the server I noticed that the Z drive has been marked as un shared. So I re enable sharing and set the desired permission. Then I re map the drive on the workstation. A few days later and the same issue happens. Both computers are always left on and I've set the power options accordingly.
i have multiple family members in the household, along with two Windows 7 desktops and three Windows 7 laptops. All pc's are on the same workgroup with file and folder sharing working faultlessly - we do not use Homegroups.I have a large amount of important data on my desktop that serves as a data backup for all work I do on my laptop. On top of this it contains a large amount of media files that get shared to all pc's too. All communication is done over the network. However, as the other family members are far less tech savvy, shall we say, than I, I am growing concerned with how easy it would be for someone else to access my laptop backup work, as it is all business related, and do something disastrous to it.I would like to have it so that my laptop is the only machine allowed to access this backup data from my desktop. The rest of the shared folders on this desktop would have to remain accessible to 'everyone'.
Just bought a new laptop Win 7 64bit.The main PC is an older Vista 32bit desktop.The laptop uses a wireless router (Netgear) to access the internet. Is there a way to printer and file share?The printer is HP C4440.I have already set the Host (Vista) PC to share files and printers under Network and Sharing Center.
Ok ive got the same issue and still no connection or detection of the xp network... I can ping and find all of the computers via the Command Promt without issue...
Network detection and the network map however do not find any of the xp computers or the one legacy computer running windows 98.
this happened after windows update and I havent been able to recover network functionality.
It might be important to note that the other xp computers can connect to the 7 ultimate 64 computer and use its files without issue.
We have an HP 2605dn printer connected to a Windows XP machine and networked to our office. We recently purchased two new PCs and have Windows 7 x64 on them. In trying to set up connection on the new machines to the networked HP printer, we can see the printer referenced in the 'Add a Printer' dialog box, but it will not connect. It says that it is "looking for .INF on <UNKNOWN>" and requires us to find this file before proceeding.
Is it because the host PC for the printer is on XP?
I can see that my home network is there but windows fails to connect to it. I've been though the troubleshooter but nothing seems to work. Now the reason why I know this network works is because my mother and sisters laptop works fine on the network. Also I does sometimes work. If I'm in the same room as router is seems to work fine. But when I'm in the other end of the house it fails to connect even though windows says it has 3-4 bars of the wifi signal. Also on a less important note, when if actually connects the bars on the taskbar only shows it full wifi signal even it it only has 3 or 4.
I recently assembled a new desktop PC, and everything is ready to use apart from the wireless Internet connection. In the taskbar, I see an icon of a laptop (?) with an X mark on it, and it says "No connections are available". I want to make a wireless connection, what should I do in order to access to the Internet wirelessly? Are there more to buy?
I have no problem networking the two operating systems and sharing folders and printers (use work not home on Windows 7). BUT, the minute I open network and/or network sharing on the windows 7 computer I lose my internetconnection on both computers and have to go through a shut down of the Windows 7 computer and unplug the cable modem and the router and restart everything.You can't get to shared folders without going through network. If you do you have to restart everything to get back internet connection.
Windows 7 is running flawlessly except I have this one problem. When I go to install ANY anti-virus software it kills my ability to access the shared files and folders from my Windows 7 machine. I uninstall the AV and all is back to normal.
How to connect to my other PC through Workgroup? I've done turning on the network discovery, file and printer sharing, sharing so anyone with network access can read and write..., & password protect. Here's a zip file.
Recently a few computers in our domain has switched to Win 7 from Win XP. Now after sharing folder shared folder are not visible while accessing that computer from our Win CE device. Windows XP or Win 7 users can browse shared folders but not WinCE device.Media Streaming, Network discovery, File sharing is Off. Firewall is turn off.
I have folders in My Documents which I have chosen to lock so they are not shared on the network, but when I browse to my computer from another computer on the network, the locked files are present and accessible.I'm pretty sure there's another way to lock folders from being shared on the network, but I don't know what it is.How can I truly lock these folders so they're not accessible on the network?
Windows 7 adding network drive shortcuts to taskar. I'm searching a similar way with XP Quick launch bar to add some network folders (which aren't mapped as drives) to taskbar.hen dragging to taskbar, there opens a window (Pinned/Recent/) which I understand means shortcut has now pinned. Now there are listed already several network shortcuts, but still these are not visible on taskbar. Where do these go and how to make these visible? It looks like it's a separate toolbar, where I can open already previously dragged shortcuts, but how to open it without dragging a new network shortcut to taskbar?When dragging an application to tasbar, there isn't such a window and application shortcut is added without any question asked.It seems like Windows 7 doesn't support dragging and creating network shares shortcuts directly onto taskabar or did I missed something essential?
So basically new folders added by uTorrent to my "Download" folder which is shared to everyone on my network don't show up when I access the older from any computer on the network. (except the one where the files are located)I have to say they do eventually show up... I guess when I restart the host or something maybe?
We have a company drive that we map folders from to certain computers. They reconnected at log in like normal. However, we have a separate external drive that when I map a folder from it, it never reconnects on log in. I have set the folder permissions for the user I want. I have tried directly connecting with the folder share name and also using the IP address of the server. They will initially connect when you set it up at first, but then it never reconnects to the drive/folder when logging back on. I have tried almost everything I can find and it still never seems to connect.
I've been wracking my brains, but cannot make this work in windows 7. It was super easy in xp. How can I set up 2 computers to share folders? I've created a homegroup, on both computers, but still they aren't communicating.
I currently have a printer connected to a computer in my room (Canon Pixma iP4300 [USB]). I also have a computer in the office which is connected to the network via a wireless extender. I am a little short of space in my room and am looking at which peripherals I can move away without too much hassle - the printer is one such thing which has a relatively large footprint and would ideally be located in the office.I am fairly confident that with a little research I could set up the printer to be shared from the office PC (Vista Home Premium x32) to other computers on the network, which would be a more suitable location for it.However, one thing that occurs to me is that it would require the office PC to be on in oder for other machines to print. Currently the office PC is set to go to sleep after a period of inactivity [20~30 minutes]. My question is, would it be possible for other computers on the network to wake this machine in order to use the printer connected to it?
