I recently assembled a new desktop PC, and everything is ready to use apart from the wireless Internet connection. In the taskbar, I see an icon of a laptop (?) with an X mark on it, and it says "No connections are available". I want to make a wireless connection, what should I do in order to access to the Internet wirelessly? Are there more to buy?
View 2 Replies
I have two wireless networks using two different routers. I can connect easily to both networks from five of my other computers, some that use XP, one with Vista and one with Windows 7. I have another AIO computer using Windows 7 that will only connect to one of the networks although both the networks appear on the list of available networks and the signal strength indicates excellent on the network that won't connect. I disconnect the network that I can access, try to connect to the other but I get the advice that the computer cannot connect. I have typed in the correct codes, do everything as on other computers but it just won't connect on this one. After a few seconds the computer automatically connects to the previous network.
View 8 Replies View Relatedmy laptop connection to a wireless network keeps going on and off what do i do, i have a windows 7 toshiba laptop
View 1 Replies View RelatedI have a wired linksys router that works fine. I'm not using DHCP on it, its setup at 192.168.1.1. My pc which only has a wired NIC, connects with no problems.I recently bought a tplink wireless router. I changed it so the ip is now 192.168.1.254 (it was 192.168.0.254 originally which meant I couldnt access settings to change from the default password, SSID).
I got the tplink wireless router, so I wouldnt have to be tethered with a wire on my laptop for internet. However, I've wasted time with tech support which I can barely hear or understand.I'd like to get this working, otherwise I'm sending everything back, wireless router and laptop.I can ping both the linksys and tplink from my laptop with no problems.I can get connected to the tplink wireless router without a problem but I cannot get to the internet.
I upgraded my Aspire One D255 netbook from widows 7 starter to windows 7 pro (32 bit). After upgrading it is not giving me the option to conect to my wireless routerIt is not even giving me the option to scan for one. I have tried all the options in the start menu, i have tried device manager, I try to scan for a router and it says "this may take up to 90 seconds" 30 mins latter and it still hasn't found a router.Can someone tell me how to connect or go back to windows 7 starter (i dont have the disk as it was already on the laptop) or how to go back to factory deaful
View 6 Replies View RelatedI am having a wireless issue on my laptop. I have had my connections in the two locations for months now. One network was recently upgraded to another router and the other network router was reset. I am at the location where the router was reset. My available networks are showing and are in excellent strength but whenever I hit "connect",nothing happens.I don't even get a prompt to enter the passcode. I even tried to connect at my local library's wifi with no such luck. When I run diagnostics it keeps saying "None of the networks you have previously connected to are in range"?? My drivers are up to date. I am a novice when it comes to computers so I really need help on this one. Just tell me what is needed in terms that I can understand (again, I am not that computer savvy,lol) and I will provide them. I am running on a 32bit and my laptop is a HP. The router is a Broadcom 4313 802.11b/g/n
View 1 Replies View RelatedI recently bought a new windows 7 laptop and tried to connect into my my router it did this successfully but it always now says no internet access when i have full bar wireless connection it only works if i am beside the router but if i walk away it doesnt work my other windows xp laptop works just fine even from 30ft away, my windows 7 laptop when troubleshooting the network that there is a problem with the wireless adapter or access point but its a new laptop i also bought a new home hub from bt because i thought that was the problem, it also says when troubleshooting that 'the connection between your access point, router, or cable modem and the internet is broken
View 1 Replies View RelatedI am having huge issues getting my new Samsung SCX 3405FW printer to connect wirelessly to my PC running Windows 7.
I have run through the instalation process many times and it always ends with 2 outcomes.
1) When I try to create a network between my printer - router - PC it states that my WPA2 password is invalid. It is not!
2) When I attempt to create an "ad-hoc" network direct from the printer to the PC the instalation process untils it reaches near the end and it tells me that my must enable "portthru" in my network settings. The only place that I can see one can add a "portthru" thing is via my firewall settings.
I have had Samsung on the phone for hours and they cannot fix it. Yes, I have downloaded and installed the latest version of the software and drivers for the printer. I have tried a reset to factory settings on the printer etc etc.
I have a hp 9810 us. Windows 7 os and Atheros AR5007 802.11b/g WiFi Adapter and a NVIDIA nForce Networking Controller/ I ran Combofix and when I boot up the computer The wi fi doesn't automaticly connect to the router. There is a switch on the front of the laptop with a indicator light red for off and blue for on. the switch is in the on position but I have to reset it in order for the computer to connect to the router.
View 14 Replies View RelatedJust bought a new laptop Win 7 64bit.The main PC is an older Vista 32bit desktop.The laptop uses a wireless router (Netgear) to access the internet. Is there a way to printer and file share?The printer is HP C4440.I have already set the Host (Vista) PC to share files and printers under Network and Sharing Center.
View 11 Replies View RelatedOk ive got the same issue and still no connection or detection of the xp network... I can ping and find all of the computers via the Command Promt without issue...
Network detection and the network map however do not find any of the xp computers or the one legacy computer running windows 98.
this happened after windows update and I havent been able to recover network functionality.
It might be important to note that the other xp computers can connect to the 7 ultimate 64 computer and use its files without issue.
We have an HP 2605dn printer connected to a Windows XP machine and networked to our office. We recently purchased two new PCs and have Windows 7 x64 on them. In trying to set up connection on the new machines to the networked HP printer, we can see the printer referenced in the 'Add a Printer' dialog box, but it will not connect. It says that it is "looking for .INF on <UNKNOWN>" and requires us to find this file before proceeding.
Is it because the host PC for the printer is on XP?
I can see that my home network is there but windows fails to connect to it. I've been though the troubleshooter but nothing seems to work. Now the reason why I know this network works is because my mother and sisters laptop works fine on the network. Also I does sometimes work. If I'm in the same room as router is seems to work fine. But when I'm in the other end of the house it fails to connect even though windows says it has 3-4 bars of the wifi signal. Also on a less important note, when if actually connects the bars on the taskbar only shows it full wifi signal even it it only has 3 or 4.
View 9 Replies View RelatedI built a new computer last August. Everything worked except my wireless. Move on to today, and still, the only issue I've ever had is with my wireless. Cabled internet works fine. Wireless does not. I've even upgraded my motherboard in this timeframe too.
Current specs are:
Mobo: Asus Crosshair IV Formula
GPU: HD 5870
CPU: Phenom II X6 1055T
RAM: 4GB of Ripjaw somethingblah
I've tried one internal N network card, and 2-3 sticks. The current one I'm trying is a TP-Link TL-WN81N 300Mpbs N Network adapter. I've used two different routers. My PS3 & iPhone connect fine. My Xbox 360 and PSP both struggle, sometimes connecting but usually not.Wireless on this computer, the issue, connects to the network fine. But it won't enable a internet connection, I never get wireless internet. Every now and then it'll work fine like nothing is wrong and other times it'll be super slow but literally 99.5% of the time it will be connected but with no internet.
Just bought a Lynksys router wrt160n to use with my wired windows 7 desktop and my wireless windows xp notebook. The notebook pickup up the signal, but we could not get past the authentication point. It wouldn't connect. Router worked fine wired with the windows 7. Any simple worded help for a beginner?
View 1 Replies View RelatedI just bought a notebook computer and need a security key to connect to CISCO. How do I get their security key?
View 2 Replies View RelatedI want to connect to a wireless router (not ours)and although the connection is available I don't know the network security key so can't connect...
View 1 Replies View RelatedHow to connect to my other PC through Workgroup? I've done turning on the network discovery, file and printer sharing, sharing so anyone with network access can read and write..., & password protect.
Here's a zip file.
I have 2 windows 7 computer on a wireless network in my house. Basically I want to be able to share the drives on both computers so that i can stream media between the computer and also devices in my home (xbox360). I went to set the drives to shared in the properties for the drives on both computers, however, whenever I try to connect to the other computer through the network section I got this pop up asking for a password, I tried login passwords and no go. So I went into the sharing options and turned off password protection and it seemed to let me through, and i can see the drive i named and setup, only now when I try clicking on the drive I shared it says (windows cannot access//Name of Folder). How do I get this to work?
View 5 Replies View RelatedI just bought my Dell inspiron laptop windows 7 today when I first turned it on I set up my home wireless connection and it was working fine. I was streaming a movie on Netflix when my Internet connection was lost. I have not been able to get Internet since then. It says I'm connected to my home wifi but that I have no Internet connection and the web browser will not load. I have a toshiba laptop windows xp an iPod an xbox360 and they all connect perfectly to the wifi. It was working fine then it just disconnected I have not gotten any Internet connection for hours and I please want to know what I can do to solve this problem. Many others seem to have a similar problem.
View 2 Replies View Relatedconnecting to two networks at once wireless and a switch?
View 4 Replies View RelatedThis is for my parents house. They have high-speed net that can only be registered to one computer, so running it to a router and then computers is not an option. We used to have it setup with net into "computer 1" then out to the wireless router. The new computer has only one ethernet port, so this can no longer be accomplished without buying another card, which I am very inclined to do. They are getting another computer that will also have Windows 7 and would like to get wireless working again, so...
1) I've tried an ad-hoc connection. I understand the concept and had it working for awhile but found it to be "finiky." I would always have to restart the connection everytime I wanted to use it. I couldn't get it to "stick." Did I maybe do something wrong or is there no way to keep the net connection open? I "saved" the network and set it to start automatically, but it would always close the internet sharing.
2) I haven't messed with home group...will this feature accomplish internet sharing easily??...without messing with any ad-hoc crap? I need everything as simple as possible, so if they have any problems I can fix it over the phone or they can figure everything out for themselves.
Like I said, worst comes to worst, I'll get them another ethernet and run it the old way...was just hoping I could simplify things and save some money.
Can a wired pc and a wireless pc both be connected to a wireless printer
View 1 Replies View RelatedI have had a Acer Aspire 5742-6814 for a month or so now. Yesterday it suddenly would not connect to the wireless network in my apartment and won't connect to a wired network either. It says that the wireless drivers are up to date and it just stopped working out of nowhere. I tried connecting to my school wireless network and that would not work either. I have tried some of the solutions that I have seen including: Resetting modem in apartment. Checking "Connect even if network is not broadcasting its name (SSID)" (which seemed to work for some people with similar problems). I really have no idea what is wrong or if it some kind of hardware issue. I can provide any further details.
View 4 Replies View RelatedI seem to have a problem with my WiFi. Left-clicking the wireless icon in system tray doesn't work as in literally nothing happens. When I open the network and sharing center and click on "connect to a network" then also nothing happens. Right now it's only a minor problem, because my laptop auto-connects to networks it already knows but when I want to connect to a public WiFi in a cafe for example I can't look up any networks.Also I'd like to point out that setting up a new connection to connect to a WiFi works but for that I need to already know the network name and security type. Windows can't find any problems either and I've reinstalled all network adapter drivers.
View 9 Replies View Relatedi cant connect my nokia bh 503 headphones to my hp laptop?
View 1 Replies View RelatedI connect at home wirelessly with no issues using Windows 7 Ultimate on my Fujitsu laptop. I don't really understand all the different types of network but currently I share with no one, and under the network settings it states 'Home Network' and then 'Ready to Create.'I was away for work recently at another site and they have an open wi-fi for visitors to use on non-work laptops, so it's passworded but other than that, it's totally unrestricted.When I tried to connect it found the wi-fi network with full strength but would not identify and connect - the password was okay as I when I tried an incorrect one, it stated just that.
View 6 Replies View RelatedI have a laptop with Windows 7 and I am trying to connect to my home network. My home network consists of two other Windows XP computers connected to a router. I have the Internet connection that the other two computers have, but I cannot see any of their files and they do not show up as network places. How do I fix this? I am not a tech person and I don't understand all this fiddly stuff and I'm getting really frustrated.
The weirdest thing is, I was able to access the other two computers fine yesterday but now they do not turn up?? I have restarted multiple times but to no avail.
I have a problem with my wireless internet card (Qualcomm Atheros Ar9485). It has trouble connecting to websites. Speed and ping is fine, but it is the connecting that often fails. I have done tests on my other computer and on my iPad, and everything works fine. I know that there is something wrong with the wifi card, because when I plug in my ethernet cable, everything works fine. My wifi drivers are up to date. I can still browse the web wirelessly, but 30-60% of the time, the connecting fails. I have had this kind of issue before (All browser slow/not loading pages) and I got the problem solved by switching wifi channels.
View 9 Replies View RelatedI get a BlueScreen every time I connect my computer (Dell M6300, Windows 7 Ultimate x64) to the company network at work. This happens with the network connection being wireless or wired! Also it doesn't happen immediately but takes from a few seconds up to several minutes until the blue screen comes. If I don't connect to the company network the system runs without any problems. This issue is perfectly reproducible. And until the system crashes the network connection is working. It also doesn't matter if there is activity on the connection or if it is idle. At home I can connect to my home network (wired and wireless) without any problems or crashes.
Problem Event Name:: BlueScreen OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1031
Additional information about the problem: BCCode: 7f BCP1: 0000000000000008 BCP2: 0000000080050031 BCP3: 00000000000006F8 BCP4: FFFFF80002A48798 OS Version: 6_1_7600 Service Pack: 0_0 Product: 256_1
[Code]....
Setup:
Desktop computer Vista
Laptop computer Win 7
On my network (wireless), my Desktop can find and use everything that is on my Laptop computer.
When I try to find or map out the Desktop from the Laptop, the Laptop cannot see my desktop at all (eg in the Network "explorer-type" window in Windows 7) .
I've checked my firewall settings, and my sharing properties on both computers, but I think I missing some setting somewhere that will let me connect from the Laptop to the Desktop (so that I can use my Desktop printer).
