Connecting A Wireless Router To Wired Network?
May 5, 2012
I have a wired linksys router that works fine. I'm not using DHCP on it, its setup at 192.168.1.1. My pc which only has a wired NIC, connects with no problems.I recently bought a tplink wireless router. I changed it so the ip is now 192.168.1.254 (it was 192.168.0.254 originally which meant I couldnt access settings to change from the default password, SSID).
I got the tplink wireless router, so I wouldnt have to be tethered with a wire on my laptop for internet. However, I've wasted time with tech support which I can barely hear or understand.I'd like to get this working, otherwise I'm sending everything back, wireless router and laptop.I can ping both the linksys and tplink from my laptop with no problems.I can get connected to the tplink wireless router without a problem but I cannot get to the internet.
View 6 Replies
ADVERTISEMENT
Nov 26, 2009
Just bought a Lynksys router wrt160n to use with my wired windows 7 desktop and my wireless windows xp notebook. The notebook pickup up the signal, but we could not get past the authentication point. It wouldn't connect. Router worked fine wired with the windows 7. Any simple worded help for a beginner?
View 1 Replies
View Related
Mar 1, 2012
Can a wired pc and a wireless pc both be connected to a wireless printer
View 1 Replies
View Related
Feb 20, 2013
To view Netflix or Amazon movies which type of router am I better off with?
View 3 Replies
View Related
Jan 24, 2012
I am having problems with my wireless adapter Cisco Router Linksys X2000, can I use it as a wired router into my network socket on the computer?
View 3 Replies
View Related
Aug 10, 2011
I have had a Acer Aspire 5742-6814 for a month or so now. Yesterday it suddenly would not connect to the wireless network in my apartment and won't connect to a wired network either. It says that the wireless drivers are up to date and it just stopped working out of nowhere. I tried connecting to my school wireless network and that would not work either. I have tried some of the solutions that I have seen including: Resetting modem in apartment. Checking "Connect even if network is not broadcasting its name (SSID)" (which seemed to work for some people with similar problems). I really have no idea what is wrong or if it some kind of hardware issue. I can provide any further details.
View 4 Replies
View Related
Nov 26, 2011
I need to switch from a wired network to a wireless network. Santa is bringing a new laptop. I guess the best way is to change routers. Not sure what to go with.I currently have 2 desktops, PS3 and a TV on the wired network. Ive looked at and read the reviews on a Linksys-Newegg.com - LINKSYS E3000 Wireless Router simultaneous Dual Band Gigabit 802.11a/b/g/n 2.4GHz / 5GHz up to 300Mbps with USB Built-in UPnP AV Media Server and an Asus-Newegg.com - ASUS RT-N16 Wireless Router 802.11b/g/n up to 300Mbps DD-WRT Open Source support with USB Storage, Printer And Media Server.For the most part the reviews are good but there a bunch of bad ones. Just wondering if any one brand is considered more reliable than the others. I don't know anything about open source firmware. Its mentioned quite a bit in the reviews.
View 5 Replies
View Related
Jun 19, 2012
I have been trying to set up a router at my girlfriend's apartment. I first tried a Linksys router that I had brought from home. I hooked it up from the wall port, to the router, to my computer. I was able to access the normal Linksys wireless setup page at 192.168.0.1 and set up a network fine. I then unplugged my ethernet cable and attempted to connect to the network and was not able to. If I recall, it 'connected' but there was no internet connection.
View 7 Replies
View Related
Aug 15, 2012
i have desktop with internet connection via cable to ADSL2+ Router and 2 laptop with internet connection via wirless to Wireless Access Point which is connected to the ADSL2+ Router
Uploaded with [URL] how i share files between desktop and one of laptops or between the two laptops
View 9 Replies
View Related
Sep 1, 2011
Why does my HP LaserJet P2015dn not print? It says Printer Offline. I am using Windows 7 but this has happened before with other versions of Windows and I have had to have it fixed. There is another computer connected to the printer.
View 1 Replies
View Related
Apr 1, 2012
I want to connect to a wireless router (not ours)and although the connection is available I don't know the network security key so can't connect...
View 1 Replies
View Related
Nov 2, 2009
This is for my parents house. They have high-speed net that can only be registered to one computer, so running it to a router and then computers is not an option. We used to have it setup with net into "computer 1" then out to the wireless router. The new computer has only one ethernet port, so this can no longer be accomplished without buying another card, which I am very inclined to do. They are getting another computer that will also have Windows 7 and would like to get wireless working again, so...
1) I've tried an ad-hoc connection. I understand the concept and had it working for awhile but found it to be "finiky." I would always have to restart the connection everytime I wanted to use it. I couldn't get it to "stick." Did I maybe do something wrong or is there no way to keep the net connection open? I "saved" the network and set it to start automatically, but it would always close the internet sharing.
2) I haven't messed with home group...will this feature accomplish internet sharing easily??...without messing with any ad-hoc crap? I need everything as simple as possible, so if they have any problems I can fix it over the phone or they can figure everything out for themselves.
Like I said, worst comes to worst, I'll get them another ethernet and run it the old way...was just hoping I could simplify things and save some money.
View 8 Replies
View Related
Dec 15, 2012
I recently bought a new windows 7 laptop and tried to connect into my my router it did this successfully but it always now says no internet access when i have full bar wireless connection it only works if i am beside the router but if i walk away it doesnt work my other windows xp laptop works just fine even from 30ft away, my windows 7 laptop when troubleshooting the network that there is a problem with the wireless adapter or access point but its a new laptop i also bought a new home hub from bt because i thought that was the problem, it also says when troubleshooting that 'the connection between your access point, router, or cable modem and the internet is broken
View 1 Replies
View Related
Jul 9, 2012
Last Friday my main desktop crashed (lost power to the machine) and on restarting the PC was unable to "identify" the network. By identify, I mean, when using "Network and Sharing Centre" on the basic network information page, the PC shows "Identifying" under "active networks" - no matter how long I leave the PC.
PC details
Model: Packard Bell Power x-30
Processor i7 870 @2.93GHz
RAM: 8GB
O/S: Windows 7 Home Premium (64-bit)
Modem Router details
Netgear N300 Wireless Dual Band ADSL2+ Modem Router
The main desktop is connected to the modem router (via Ethernet). The modem router is showing no sign of any problems itself, all the dashboard lights look ok (i.e. power is on, port 1 shows the Ethernet connection in place, both wireless bands are lit, the DSL is lit and so is the internet). The household contains a number of laptops which continue to work ok wirelessly and/or wired through Ethernet. Even mobile phones are accessing the wi-fi ok.
The DNS Server address looks ok, as that is the address of the web page to the router. I cannot access that web page (address) via the main desktop, but I can from other devices ok. Having gone through Device Manager the Realtek PCIe GBE Family Controller is showing as "working properly". I have tried pinging the DNS Server address, and that fail. I have gone through a system restore to a previous point (before the day of the crash) but that seems to have made no difference either.
I have attempted to set the IP addresses (for TCP/IPv4) directly
IP address 192.168.0.3
Subnet mask: 255.255.255.0
Default Gateway: 192.168.0.1
And therefore forced to set the DNS Server address too
Preferred DNS server: 192.68.0.1
But I don't know what to set for the alternate DNS Server, so left blank. This seems to step me forward, in that the device/network is now identified. However the internet access is still not work, as the "DNS Server is not responding".
View 2 Replies
View Related
Nov 11, 2010
For some reason my router and modem will not show correctly on my dell inspirion one desktop. Im running windows 7 and here are the net work connection deatils
Connection -specific DNS Belkin
Description Realtek PCIe GBE Family Controller
Physical Address 00-00-00-00-00-00
DCHP Enabled Yes
Ipv4 Address 192.168.2.2
Ipv4 Subnet Mask 255.255.255.0
Lease obtained Wednesday, November 10, 2010 9:45 PM
Lease Expires Sunday, December 18, 2146 4:17 AM
IPv4 Default Gateway 192.168.2.1
Ipv4 DHCP Server 192.168.2.1
Ipv4 DNS Server 192.168.2.1
IPv4 WINS Server
NetBIOS over Tcpip enabled Yes
The Connection was working about ten days ago and then suddenly stopped and read as an unidentified network no internet access. at one point is was not receiving packets but now it is but it still says no internet access on the IPv4 Connectivity. Media state is also enabled and the speed is 100.0 Mbps when i troubleshoot it says windows cant identify problem but in the details it says default gateway is available. when i use the cmd prompt ipconfig/all my local ethernet adapter has a physical address of all zeros.
View 9 Replies
View Related
Aug 10, 2011
The output of the "print route" command on my Win7x64 system is shown below.The wireless adapter has been assigned to 198.168.2.72 by the router and the Gigabit wired connection has been manually assigned the static address 198.168.2.8The strange thing is that the gateway metric which I believe is used to decide which connection to use is 25 for the wireless connection (i.e. fast) and 276 (i.e. slow) for the gigabit wired connection. But I expected this to be the other way around. Why does it think the wireless onnection is faster? Does this mean that network traffic is generally routed thru the wireless adapter? Is there a way for me to tell which adapter is being used to route traffic?Should I believe its reported speed, or should I force the metrics so that the wired connection is used by default. If so, what commands are used to force this priority, and do these commands need to be repeated after every boot, or are the permanent?
[code]...
View 4 Replies
View Related
Mar 24, 2011
The title suggests i need to setup my networks so that they are both working harmoniously together.The reason i need this is because on the wireless side i need to connect to my router for internet access.On the wired side i need to connect to my NAS. I have tried connecting the NAS box to the router and it works but it is too slow.
View 5 Replies
View Related
Jan 17, 2010
I recently bought myself a new Netgear Stora MS2110 (network storage), my network situation is a bit strange. I've got my computer connected to a wireless network with internet access, and the Stora now connected to the computer by a wired LAN without internet. I just now discovered that I needed to have internet to setup the Stora, so my question is this - Can I somehow Bridge the wireless network onto the wired network through my computer? giving the Stora internet access and access to the wireless network.
View 5 Replies
View Related
May 17, 2012
I have windows XP mode installed on Window 7 Enterprise and running Windows XP ofcorce. I need to connect my laptop to wired network and in some time to connect wireless for XP mode using. What I mean : I want to use wired internet for my Windows 7 and in same time wireless network for windows XP in XP mode that is running. This I need because those two windows need to be connected in different networks.
View 1 Replies
View Related
Jan 28, 2012
I recently replaced my wireless router and Bellsouth DSL modem with a single Netgear DGN2200 DSL modem/wireless router. The problem is my desktop which is wired, cannot see the laptop computers that are on the network via wireless connection. If I start a homegroup with one of the laptops, the other laptop can join but my desktop cannot (no "join now" option). If I start a homegroup with my wired desktop, neither laptop sees it.However, if I connect my desktop to the network using my USB wireless adapter, then I can establish a homegroup with either a laptop or the desktop with no problem.I have checked that IPv6 is enabled and that all the services listed in other posts are enabled. I'm fairly certain the cause is some setting in my router security, but I don't see anything that would prevent my desktop from linking. I can also get on the internet with no problem.
View 1 Replies
View Related
Oct 19, 2012
how to configure my wireless router WNR500 to my existing wireless network
View 1 Replies
View Related
Sep 22, 2012
I have two wireless networks using two different routers. I can connect easily to both networks from five of my other computers, some that use XP, one with Vista and one with Windows 7. I have another AIO computer using Windows 7 that will only connect to one of the networks although both the networks appear on the list of available networks and the signal strength indicates excellent on the network that won't connect. I disconnect the network that I can access, try to connect to the other but I get the advice that the computer cannot connect. I have typed in the correct codes, do everything as on other computers but it just won't connect on this one. After a few seconds the computer automatically connects to the previous network.
View 8 Replies
View Related
Aug 1, 2012
my laptop connection to a wireless network keeps going on and off what do i do, i have a windows 7 toshiba laptop
View 1 Replies
View Related
Feb 1, 2013
I recently assembled a new desktop PC, and everything is ready to use apart from the wireless Internet connection. In the taskbar, I see an icon of a laptop (?) with an X mark on it, and it says "No connections are available". I want to make a wireless connection, what should I do in order to access to the Internet wirelessly? Are there more to buy?
View 2 Replies
View Related
Feb 24, 2011
I have a wireless router for a desktop...want to use it for mini notebook, lost security key!
View 5 Replies
View Related
May 7, 2011
how can i find my net work key to ad wireless on my sacond computer
View 1 Replies
View Related
Jan 6, 2013
i need my pass word and security cod to set up my netflix
View 2 Replies
View Related
Nov 24, 2012
why one of my laptop suddenly has no internet access.no matter what I tried its still does not connet.It is show that its connecting to my main network but it said no internet access.
View 7 Replies
View Related
Aug 12, 2011
I have Brother MFC7340 printer connected to my HP home premium Windows 7 64 via a USB port. There is no ethernet connection. I want my Windows XP computer, connected to the local home network via ethernet hard connection through my wireless router to be able to print either with a hard connect or wirelessly to this printer. I am having trouble figuring out what to do and have tried various strategies to no avail.
View 1 Replies
View Related
Feb 14, 2012
my computor speakers are hard wired together, yet only one of them has sound,why
View 1 Replies
View Related
Oct 3, 2012
Hey, I've recently reinstalled my Windows 7 Home Premium and I since my PC does not detect the router.I've tried using a SKY recovery disk, but that failed and nothing happened. Do I need to download a specific driver so the PC can detect the router?
View 5 Replies
View Related