I need to switch from a wired network to a wireless network. Santa is bringing a new laptop. I guess the best way is to change routers. Not sure what to go with.I currently have 2 desktops, PS3 and a TV on the wired network. Ive looked at and read the reviews on a Linksys-Newegg.com - LINKSYS E3000 Wireless Router simultaneous Dual Band Gigabit 802.11a/b/g/n 2.4GHz / 5GHz up to 300Mbps with USB Built-in UPnP AV Media Server and an Asus-Newegg.com - ASUS RT-N16 Wireless Router 802.11b/g/n up to 300Mbps DD-WRT Open Source support with USB Storage, Printer And Media Server.For the most part the reviews are good but there a bunch of bad ones. Just wondering if any one brand is considered more reliable than the others. I don't know anything about open source firmware. Its mentioned quite a bit in the reviews.
I have a wired linksys router that works fine. I'm not using DHCP on it, its setup at 192.168.1.1. My pc which only has a wired NIC, connects with no problems.I recently bought a tplink wireless router. I changed it so the ip is now 192.168.1.254 (it was 192.168.0.254 originally which meant I couldnt access settings to change from the default password, SSID).
I got the tplink wireless router, so I wouldnt have to be tethered with a wire on my laptop for internet. However, I've wasted time with tech support which I can barely hear or understand.I'd like to get this working, otherwise I'm sending everything back, wireless router and laptop.I can ping both the linksys and tplink from my laptop with no problems.I can get connected to the tplink wireless router without a problem but I cannot get to the internet.
I have been trying to set up a router at my girlfriend's apartment. I first tried a Linksys router that I had brought from home. I hooked it up from the wall port, to the router, to my computer. I was able to access the normal Linksys wireless setup page at 192.168.0.1 and set up a network fine. I then unplugged my ethernet cable and attempted to connect to the network and was not able to. If I recall, it 'connected' but there was no internet connection.
i have desktop with internet connection via cable to ADSL2+ Router and 2 laptop with internet connection via wirless to Wireless Access Point which is connected to the ADSL2+ Router
Uploaded with [URL] how i share files between desktop and one of laptops or between the two laptops
Why does my HP LaserJet P2015dn not print? It says Printer Offline. I am using Windows 7 but this has happened before with other versions of Windows and I have had to have it fixed. There is another computer connected to the printer.
Hey, I've recently reinstalled my Windows 7 Home Premium and I since my PC does not detect the router.I've tried using a SKY recovery disk, but that failed and nothing happened. Do I need to download a specific driver so the PC can detect the router?
Just did a clean windows 7 x64 installation on a build a box computer with a new hard drive. Install went fine. Plugged it in to my 3 month old Linksys Wireless G Broadband Router (WRT54GL) and it doesn't recognize that there is any connection at all. Windows says "No connections are available" and troubleshooting can't identify the problem. The light on the router and on the computer comes on. I am running a wired connected XP computer and 2 Win 7 x32 wireless connected computers just fine. Ran ipconfig /all and it came up as follows:
Host Name.................... : Bottomdweller-PC Primary DNS suffix.......... : Node Type ....................: Hybrid
[Code]....
All wires are connected. I've tried booting in Safe mode with networking. I've even connected the computer directly to the cablevision modem. I've installed a USB Linksys wireless adapter and although it installs fine, it doesn't see the router at all. I've also tried reinstalling the router directly on this computer but it doesn't see the router at all.
I've tried setting up a new connection or network, Connecting to a network and choosing a homegroup and sharing option but since you need a network to connect to first I couldn't do it.
What are my options for connecting a laptop wirelessly to a workstation that is connected to a wired LAN and has no router?Essentially, I want to add wireless connectivity to the workstation so that the laptop can connect to the wired LAN via the workstation.
Last Friday my main desktop crashed (lost power to the machine) and on restarting the PC was unable to "identify" the network. By identify, I mean, when using "Network and Sharing Centre" on the basic network information page, the PC shows "Identifying" under "active networks" - no matter how long I leave the PC.
PC details Model: Packard Bell Power x-30 Processor i7 870 @2.93GHz RAM: 8GB O/S: Windows 7 Home Premium (64-bit)
The main desktop is connected to the modem router (via Ethernet). The modem router is showing no sign of any problems itself, all the dashboard lights look ok (i.e. power is on, port 1 shows the Ethernet connection in place, both wireless bands are lit, the DSL is lit and so is the internet). The household contains a number of laptops which continue to work ok wirelessly and/or wired through Ethernet. Even mobile phones are accessing the wi-fi ok.
The DNS Server address looks ok, as that is the address of the web page to the router. I cannot access that web page (address) via the main desktop, but I can from other devices ok. Having gone through Device Manager the Realtek PCIe GBE Family Controller is showing as "working properly". I have tried pinging the DNS Server address, and that fail. I have gone through a system restore to a previous point (before the day of the crash) but that seems to have made no difference either.
I have attempted to set the IP addresses (for TCP/IPv4) directly IP address 192.168.0.3 Subnet mask: 255.255.255.0 Default Gateway: 192.168.0.1 And therefore forced to set the DNS Server address too Preferred DNS server: 192.68.0.1
But I don't know what to set for the alternate DNS Server, so left blank. This seems to step me forward, in that the device/network is now identified. However the internet access is still not work, as the "DNS Server is not responding".
I have three PCs that connect to my home network wireless and two others that connect wired through a hub. Periodically one of the wireless PCs will see the other wireless devices but not the wired ones. This morning I installed some Win 7 updates and after the restart my laptop can't see the wired devices. My wife's Win 7 laptop sees everything. So the problem is intermittent. I have fiddled with Advanced Settings in Network Sharing, such as turning Network Discovery off and back on again. I can't seem to find the silver bullet that will cure this problem when it occurs.
For some reason my router and modem will not show correctly on my dell inspirion one desktop. Im running windows 7 and here are the net work connection deatils
Connection -specific DNS Belkin Description Realtek PCIe GBE Family Controller Physical Address 00-00-00-00-00-00 DCHP Enabled Yes Ipv4 Address 192.168.2.2 Ipv4 Subnet Mask 255.255.255.0 Lease obtained Wednesday, November 10, 2010 9:45 PM Lease Expires Sunday, December 18, 2146 4:17 AM IPv4 Default Gateway 192.168.2.1 Ipv4 DHCP Server 192.168.2.1 Ipv4 DNS Server 192.168.2.1 IPv4 WINS Server NetBIOS over Tcpip enabled Yes
The Connection was working about ten days ago and then suddenly stopped and read as an unidentified network no internet access. at one point is was not receiving packets but now it is but it still says no internet access on the IPv4 Connectivity. Media state is also enabled and the speed is 100.0 Mbps when i troubleshoot it says windows cant identify problem but in the details it says default gateway is available. when i use the cmd prompt ipconfig/all my local ethernet adapter has a physical address of all zeros.
I've been using wireless internet for months with my new computer which has Windows 7 64-bit. Today I disabled the wireless security for a bit, then tried to enable it, now I can't connect to anything. The problems are: 'The DNS server isn't responding' and 'Local Area Connection doesn't have a valid IP config'. My wireless icon keeps switching between a yellow exclamation point icon and a circular blue loading icon. It says it's connected but I cannot browse the net, I can access my router information though. My router/modem are definitely on and connected. I've done many power cycles on those and my computer. My modem is Comcast and my router is a Netgear WPN824 V2. The router has the most recent firmware.
Here is my ipconfig data:
Microsoft Windows [Version 6.1.7600] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:UsersVector03>ipconfig Windows IP Configuration
I bought a Windows 7 machine today. I went home and plugged the ethernet jack into the computer - it finds the connection, but won't connect to the internet. The wireless works fine. The wired works on my old vista machine. I went over the a friend's place - same deal, and their new Windows 7 machine doesn't work in the wired connection either. We are both Shaw cable subscribers in Western Canada.
I have tried restarting, disabling/re-enabling the drivers, updating the connection drivers. I can't think of anything else - suggestions?
Just bought a Lynksys router wrt160n to use with my wired windows 7 desktop and my wireless windows xp notebook. The notebook pickup up the signal, but we could not get past the authentication point. It wouldn't connect. Router worked fine wired with the windows 7. Any simple worded help for a beginner?
i have a pc running xp wired to my modem. i have another running windows 7 that connects wireless to the router. i can connect to the internet from the wireless w7 pc but as soon as i try to stream or download i lose connectivity.
In a few days time I will be changing my ISP in the UK from Sky to BT.
BT are providing me with their newest wireless router free of charge as part of the deal and I'll be using that to set up my wireless network, which will consist of an HP Pavilion desktop, a Toshiba laptop, a Sony Vaio laptop, an HP wireless printer and a Samsung HDTV.
This means my Sky wireless router is surplus to requirements, so I was wondering if I could convert it to a wireless access point to improve the range of my BT wireless network.
I've read a couple of supposedly easy-to-understand articles on Google and have to say they left me more confused than ever.
The output of the "print route" command on my Win7x64 system is shown below.The wireless adapter has been assigned to 198.168.2.72 by the router and the Gigabit wired connection has been manually assigned the static address 198.168.2.8The strange thing is that the gateway metric which I believe is used to decide which connection to use is 25 for the wireless connection (i.e. fast) and 276 (i.e. slow) for the gigabit wired connection. But I expected this to be the other way around. Why does it think the wireless onnection is faster? Does this mean that network traffic is generally routed thru the wireless adapter? Is there a way for me to tell which adapter is being used to route traffic?Should I believe its reported speed, or should I force the metrics so that the wired connection is used by default. If so, what commands are used to force this priority, and do these commands need to be repeated after every boot, or are the permanent?
The title suggests i need to setup my networks so that they are both working harmoniously together.The reason i need this is because on the wireless side i need to connect to my router for internet access.On the wired side i need to connect to my NAS. I have tried connecting the NAS box to the router and it works but it is too slow.
I've been trying to create a homegroup which my laptop (wireless) and my computer (wired) will be part of. They are both connected to the same router. My wireless is called "BuckleyWireless" and my wired computer is connected to something called "VirginMedia478xxx". I'm not sure whether these have to be the same name for it to work so I thought I'd post this anyway.I've checked the subnet mask for both computers and they are the same.I've tried turning off the firewalls on both computers.I've gone into advanced settings so that both computers are "visible" within the network.My laptop is now visible on my wired computer but it can't actually be accessed for some reason.
I have a new Desktop running Win 7 64 Bit and a laptop running Win 7 32 Bit. The desktop is hard-wired to my router and the laptop is connected to my WI-FI network, along with my printers and back-up drive. I would like to set up a homegroup so I can share files between them and hopefully synch my two Outlook Contact files and back both up on my Buffalo back-up hardrive. How can I enable the two computers to see one another? Also how do I change the name of my laptop?
I recently bought myself a new Netgear Stora MS2110 (network storage), my network situation is a bit strange. I've got my computer connected to a wireless network with internet access, and the Stora now connected to the computer by a wired LAN without internet. I just now discovered that I needed to have internet to setup the Stora, so my question is this - Can I somehow Bridge the wireless network onto the wired network through my computer? giving the Stora internet access and access to the wireless network.
Is there a way to setup your computer to connect only to a specific wireless router in your area? I live in a college dorm and there are a lot of wireless connects available so I'm thinking that there might be complications with my computer with all the information in the air.
my buddy has a laptop issue when its a wired internet connection. when its wireless, it has no problems with the internet, everything works fine. but when its wired, webpages will still load, but Internet videos wont work, anything that consists of streaming doesn't work, and he cant even use logmein. i have connected other laptops to the same cord and there is no problems. so i know its not the cord and i imagine its not the router since everything still works fine with other computers.
I have Windows 7 SP1, 32bit on my laptop. I have both wired connection, and wireless connection. It may not make much sense to have both active, but at times I do.
When I have both wired and wireless connected, why do I not have both the wired and wireless icons in the sys tray?
Is there any way to "turn on" these icons? In the taskbar properties notification area, I have "always show all icons" checked.
I have had a Acer Aspire 5742-6814 for a month or so now. Yesterday it suddenly would not connect to the wireless network in my apartment and won't connect to a wired network either. It says that the wireless drivers are up to date and it just stopped working out of nowhere. I tried connecting to my school wireless network and that would not work either. I have tried some of the solutions that I have seen including: Resetting modem in apartment. Checking "Connect even if network is not broadcasting its name (SSID)" (which seemed to work for some people with similar problems). I really have no idea what is wrong or if it some kind of hardware issue. I can provide any further details.
