Can't Connect To The Internet Or Wired Router
Jun 3, 2011
Just did a clean windows 7 x64 installation on a build a box computer with a new hard drive. Install went fine. Plugged it in to my 3 month old Linksys Wireless G Broadband Router (WRT54GL) and it doesn't recognize that there is any connection at all. Windows says "No connections are available" and troubleshooting can't identify the problem. The light on the router and on the computer comes on. I am running a wired connected XP computer and 2 Win 7 x32 wireless connected computers just fine. Ran ipconfig /all and it came up as follows:
Host Name.................... : Bottomdweller-PC
Primary DNS suffix.......... :
Node Type ....................: Hybrid
[Code]....
All wires are connected. I've tried booting in Safe mode with networking. I've even connected the computer directly to the cablevision modem. I've installed a USB Linksys wireless adapter and although it installs fine, it doesn't see the router at all. I've also tried reinstalling the router directly on this computer but it doesn't see the router at all.
I've tried setting up a new connection or network, Connecting to a network and choosing a homegroup and sharing option but since you need a network to connect to first I couldn't do it.
View 3 Replies
ADVERTISEMENT
Nov 11, 2010
For some reason my router and modem will not show correctly on my dell inspirion one desktop. Im running windows 7 and here are the net work connection deatils
Connection -specific DNS Belkin
Description Realtek PCIe GBE Family Controller
Physical Address 00-00-00-00-00-00
DCHP Enabled Yes
Ipv4 Address 192.168.2.2
Ipv4 Subnet Mask 255.255.255.0
Lease obtained Wednesday, November 10, 2010 9:45 PM
Lease Expires Sunday, December 18, 2146 4:17 AM
IPv4 Default Gateway 192.168.2.1
Ipv4 DHCP Server 192.168.2.1
Ipv4 DNS Server 192.168.2.1
IPv4 WINS Server
NetBIOS over Tcpip enabled Yes
The Connection was working about ten days ago and then suddenly stopped and read as an unidentified network no internet access. at one point is was not receiving packets but now it is but it still says no internet access on the IPv4 Connectivity. Media state is also enabled and the speed is 100.0 Mbps when i troubleshoot it says windows cant identify problem but in the details it says default gateway is available. when i use the cmd prompt ipconfig/all my local ethernet adapter has a physical address of all zeros.
View 9 Replies
View Related
Oct 3, 2012
Hey, I've recently reinstalled my Windows 7 Home Premium and I since my PC does not detect the router.I've tried using a SKY recovery disk, but that failed and nothing happened. Do I need to download a specific driver so the PC can detect the router?
View 5 Replies
View Related
Jul 16, 2011
What are my options for connecting a laptop wirelessly to a workstation that is connected to a wired LAN and has no router?Essentially, I want to add wireless connectivity to the workstation so that the laptop can connect to the wired LAN via the workstation.
View 2 Replies
View Related
Jun 17, 2012
I disconnected my wired internet on my pc by right clicking on the internet icon down on the right toolbar and therefrom i disconnected. Right now I can't connect it back. I've tried unplugg and plugg it in (not working) and restarting the pc (again, not working).
View 2 Replies
View Related
Oct 10, 2012
I can connect to wi-fi, but not to other the internet. A wired connection will not connect to the internet either. Other devices (ipad, laptop, directv box, etc... all connect fine. Using the network map I can see the other devices on my network from this pc. If I run in safe mode with networking I can connect to the internet.
Windows firewall is disabled, using McAfee firewall. I momentarily disabled all firewalls and still unable to connect to the internet. I have scanned the computer (in safe mode) with McAfee, Malware Malybytes, & the MS Windows malicous software scanner. All clean. I was thinking virus or malware, but have done everything I can think of.
View 3 Replies
View Related
Nov 17, 2011
My PC connects to the internet (wired) perfectly, but my TOSHIBA laptop does not. The router does not show the correct lights when plugged into the laptop, so I have tried resetting the router (with no success). When I plug the ethernet cable into the laptop, nothing happens at all.
View 19 Replies
View Related
Jul 1, 2012
how i can connect to my router in my home when im using internet outside for example in my office
View 4 Replies
View Related
Nov 2, 2012
Same wifi network works on my laptop but not my desktop. Running the troubleshooter on my desktop comes up with no errors. My ipconfig /all is below.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersMike>ipconfig /all
Windows IP Configuration
[code]....
View 9 Replies
View Related
Feb 20, 2013
To view Netflix or Amazon movies which type of router am I better off with?
View 3 Replies
View Related
Jul 12, 2012
I am running windows 7, 64 bit and have been having an issue with my Linksys E1500 router recently that has my ISP
My router will respond to pings from my laptop both wirelessly and when connected via ethernet cable, and will respond to pings from my ISP, but it won't allow my laptop to connect to the internet. I have rest and reconfigured the router a bunch of times, leaving the MAC address alone, cloning it to my laptop's ethernet port, and cloning it to my wireless cards MAC addresses, respectively. None of that allows it to connect. Linksys (Cisco) has been useless in helping both via their site and when contacted, encouraging me to pay $40 to talk to someone who MAY be able to help.
Note: The router worked fine for about 4 months, then one morning, couldn't connect to the internet through it. Have to connect directly from the modem via ethernet cable.
View 9 Replies
View Related
Sep 11, 2012
Not my week so far yet another problem. Been trying all day to connect to the internet with the above router.Happened accross a screen saying Firewall settings.It says for the inbound services "BLOCK always" is this my problem?I have tried to amend this to " ALLOW always" to which the outbound services are already set.My next problem is it is asking for the inbound services to be adjusted so I have setthe service parameter to ALL, action ALLOW always but now is the problem it wants an address putting into the 4 boxes for the Send to LAN Server parameter,I have tried various setting but to no avail. Exactly where can I get this information from?
View 5 Replies
View Related
Jan 24, 2012
I am having problems with my wireless adapter Cisco Router Linksys X2000, can I use it as a wired router into my network socket on the computer?
View 3 Replies
View Related
Dec 28, 2012
I have a netgear wireless router upstairs. My dell laptop, my iMac (which is downstairs) and my iPad/iPhones all connect anywhere in the house. My Toshiba laptop and my work dell will not connect or it connects very intermittently. I can stay connected for days on other wifi networks, just not at home. Any ideas?
View 6 Replies
View Related
Nov 26, 2011
I need to switch from a wired network to a wireless network. Santa is bringing a new laptop. I guess the best way is to change routers. Not sure what to go with.I currently have 2 desktops, PS3 and a TV on the wired network. Ive looked at and read the reviews on a Linksys-Newegg.com - LINKSYS E3000 Wireless Router simultaneous Dual Band Gigabit 802.11a/b/g/n 2.4GHz / 5GHz up to 300Mbps with USB Built-in UPnP AV Media Server and an Asus-Newegg.com - ASUS RT-N16 Wireless Router 802.11b/g/n up to 300Mbps DD-WRT Open Source support with USB Storage, Printer And Media Server.For the most part the reviews are good but there a bunch of bad ones. Just wondering if any one brand is considered more reliable than the others. I don't know anything about open source firmware. Its mentioned quite a bit in the reviews.
View 5 Replies
View Related
Jul 9, 2011
I have a Dlink wired router. Should I use a software driven firewall or is the Dlink firewall sufficient?
View 1 Replies
View Related
May 5, 2012
I have a wired linksys router that works fine. I'm not using DHCP on it, its setup at 192.168.1.1. My pc which only has a wired NIC, connects with no problems.I recently bought a tplink wireless router. I changed it so the ip is now 192.168.1.254 (it was 192.168.0.254 originally which meant I couldnt access settings to change from the default password, SSID).
I got the tplink wireless router, so I wouldnt have to be tethered with a wire on my laptop for internet. However, I've wasted time with tech support which I can barely hear or understand.I'd like to get this working, otherwise I'm sending everything back, wireless router and laptop.I can ping both the linksys and tplink from my laptop with no problems.I can get connected to the tplink wireless router without a problem but I cannot get to the internet.
View 6 Replies
View Related
Jun 19, 2012
I have been trying to set up a router at my girlfriend's apartment. I first tried a Linksys router that I had brought from home. I hooked it up from the wall port, to the router, to my computer. I was able to access the normal Linksys wireless setup page at 192.168.0.1 and set up a network fine. I then unplugged my ethernet cable and attempted to connect to the network and was not able to. If I recall, it 'connected' but there was no internet connection.
View 7 Replies
View Related
Aug 15, 2012
i have desktop with internet connection via cable to ADSL2+ Router and 2 laptop with internet connection via wirless to Wireless Access Point which is connected to the ADSL2+ Router
Uploaded with [URL] how i share files between desktop and one of laptops or between the two laptops
View 9 Replies
View Related
Sep 1, 2011
Why does my HP LaserJet P2015dn not print? It says Printer Offline. I am using Windows 7 but this has happened before with other versions of Windows and I have had to have it fixed. There is another computer connected to the printer.
View 1 Replies
View Related
Dec 30, 2012
I need assistance with my router, serial # CSV01H7A3323 broad band router. I do not remember the password
View 2 Replies
View Related
Jul 9, 2012
Last Friday my main desktop crashed (lost power to the machine) and on restarting the PC was unable to "identify" the network. By identify, I mean, when using "Network and Sharing Centre" on the basic network information page, the PC shows "Identifying" under "active networks" - no matter how long I leave the PC.
PC details
Model: Packard Bell Power x-30
Processor i7 870 @2.93GHz
RAM: 8GB
O/S: Windows 7 Home Premium (64-bit)
Modem Router details
Netgear N300 Wireless Dual Band ADSL2+ Modem Router
The main desktop is connected to the modem router (via Ethernet). The modem router is showing no sign of any problems itself, all the dashboard lights look ok (i.e. power is on, port 1 shows the Ethernet connection in place, both wireless bands are lit, the DSL is lit and so is the internet). The household contains a number of laptops which continue to work ok wirelessly and/or wired through Ethernet. Even mobile phones are accessing the wi-fi ok.
The DNS Server address looks ok, as that is the address of the web page to the router. I cannot access that web page (address) via the main desktop, but I can from other devices ok. Having gone through Device Manager the Realtek PCIe GBE Family Controller is showing as "working properly". I have tried pinging the DNS Server address, and that fail. I have gone through a system restore to a previous point (before the day of the crash) but that seems to have made no difference either.
I have attempted to set the IP addresses (for TCP/IPv4) directly
IP address 192.168.0.3
Subnet mask: 255.255.255.0
Default Gateway: 192.168.0.1
And therefore forced to set the DNS Server address too
Preferred DNS server: 192.68.0.1
But I don't know what to set for the alternate DNS Server, so left blank. This seems to step me forward, in that the device/network is now identified. However the internet access is still not work, as the "DNS Server is not responding".
View 2 Replies
View Related
Mar 12, 2012
I've been trying to create a homegroup which my laptop (wireless) and my computer (wired) will be part of. They are both connected to the same router. My wireless is called "BuckleyWireless" and my wired computer is connected to something called "VirginMedia478xxx". I'm not sure whether these have to be the same name for it to work so I thought I'd post this anyway.I've checked the subnet mask for both computers and they are the same.I've tried turning off the firewalls on both computers.I've gone into advanced settings so that both computers are "visible" within the network.My laptop is now visible on my wired computer but it can't actually be accessed for some reason.
View 3 Replies
View Related
Aug 11, 2011
Me again, so I know why the Windows 7 HP PC in my last thread won't connect to a wired network here at work, however I've just tried to connect this PC (which is running Windows 7 Professional 32 bit, 2.6Ghz Quad core, 4GB RAM (it's an Acer Veriton X275)) and I get the same stuff. It sees an unidentifed local area connection but it tells me there is no internet access and no network access. Not only is this annoying, but having just got the company to spend over �450 on copies of Windows 7 Pro for 4 other PCs (as well as memory upgrades for 2) it's more than a little worrying!
why this Windows 7 PRO PC won't connect to a wired network? Server PC is running Windows Server 2000, coming through a Netgear switch.
View 2 Replies
View Related
May 17, 2012
I have windows XP mode installed on Window 7 Enterprise and running Windows XP ofcorce. I need to connect my laptop to wired network and in some time to connect wireless for XP mode using. What I mean : I want to use wired internet for my Windows 7 and in same time wireless network for windows XP in XP mode that is running. This I need because those two windows need to be connected in different networks.
View 1 Replies
View Related
Mar 27, 2011
My Desktop is connected to a NetGear Router and is on a DLS line to internet. My wireless laptop picks up signal ok and goes online, it also "sees" desktop name, but I can't connect to it for file and printer sharing.
View 2 Replies
View Related
Jan 9, 2012
I currenly work in an IT department and have given this 'project'.
We have a number of users who have been given 32bit Windows 7 laptops for remote, home and office working.
I have been asked to create a batch file so that as soon as the user comes into the office they plug the laptop into the network and it should use the wired connection automatically to access the corporate LAN. As soon as they work away and need to access the corporate network remotly they do not need to press the wireless button on the laptop, when the laptop is switched and logged on i want the laptop to know that it is not on a wired network and for the wireless to kick in.
I have created two bat files -
netsh interface set interface �Wireless Network Connection� Disable
and
netsh interface set interface �Wireless Network Connection� Enable
these have been placed in task scheduler under create a basic task. I have tried both of these in cmd prompt but they still don't work.
View 3 Replies
View Related
Jan 30, 2013
My Windows 7 laptop works Fine at home on my broadband with a wired connection, When I take my laptop downtown and try to connect to a company network, via a wire, windows 7 fails to find the connection.
View 1 Replies
View Related
Jan 31, 2012
I have a Sony Vaio with windows 7 OS (64bit), I have installed and ran several differnet antivirus and malware programs and found nothing. I ran a full virus Scan (Kasperksy anti-virus 2012) and no issues found, I tried to do a System Restore to earlier date (it failed), I can see that i have an issue with the WAN Miniport IKEv2 (It will not deinstall...to try and reinstall...it just errors), I get "Diagnostic Policy Service not running" every time i try to trouble shoot. I have even performed a system scan, (cmd.exe....cfs/scannow) and it found nothing. I even bought a new USB wirelss adapter to try and get online and it doesnt work. I have tried to log on to the internet at work through our network as well as at home through my home netowork (two different providers) and nothing works
View 2 Replies
View Related
Jun 6, 2012
So I have laptop and I have wired internet.Yesterday its just stoped working
-IPv4 connecitivty No internet access
-IPv6 connectivity No network access
When Im trying to detecting problems Troubleshooting couldnt identify the problem.Now It says Your computer appears to be correctly configured ,but the device or resoucre (www.miscrosoft.com) is not responding.when i type ipconfig/all its say Windows Ip configuration.
View 2 Replies
View Related
May 22, 2011
i'm having trouble getting onto the internet with my wired settings on my desktop. I usually have it connected through wireless (I have a pci-e wireless card), but when i try with my ethernet cable, it doesnt connect. I have two OS's installed on this computer windows 7 and vista. I have tried to on both windows to get on the net, but to no avail. I have tried the diagnose and repair, but it doesnt fix anything. It does however, says "Windows cannot connect to the primary DNS Server" or something like that.
View 6 Replies
View Related