Can Use A Wireless Router As A Wired Router
Jan 24, 2012I am having problems with my wireless adapter Cisco Router Linksys X2000, can I use it as a wired router into my network socket on the computer?
View 3 RepliesI am having problems with my wireless adapter Cisco Router Linksys X2000, can I use it as a wired router into my network socket on the computer?
View 3 RepliesTo view Netflix or Amazon movies which type of router am I better off with?
View 3 Replies View RelatedI need to switch from a wired network to a wireless network. Santa is bringing a new laptop. I guess the best way is to change routers. Not sure what to go with.I currently have 2 desktops, PS3 and a TV on the wired network. Ive looked at and read the reviews on a Linksys-Newegg.com - LINKSYS E3000 Wireless Router simultaneous Dual Band Gigabit 802.11a/b/g/n 2.4GHz / 5GHz up to 300Mbps with USB Built-in UPnP AV Media Server and an Asus-Newegg.com - ASUS RT-N16 Wireless Router 802.11b/g/n up to 300Mbps DD-WRT Open Source support with USB Storage, Printer And Media Server.For the most part the reviews are good but there a bunch of bad ones. Just wondering if any one brand is considered more reliable than the others. I don't know anything about open source firmware. Its mentioned quite a bit in the reviews.
View 5 Replies View RelatedI have a wired linksys router that works fine. I'm not using DHCP on it, its setup at 192.168.1.1. My pc which only has a wired NIC, connects with no problems.I recently bought a tplink wireless router. I changed it so the ip is now 192.168.1.254 (it was 192.168.0.254 originally which meant I couldnt access settings to change from the default password, SSID).
I got the tplink wireless router, so I wouldnt have to be tethered with a wire on my laptop for internet. However, I've wasted time with tech support which I can barely hear or understand.I'd like to get this working, otherwise I'm sending everything back, wireless router and laptop.I can ping both the linksys and tplink from my laptop with no problems.I can get connected to the tplink wireless router without a problem but I cannot get to the internet.
I have been trying to set up a router at my girlfriend's apartment. I first tried a Linksys router that I had brought from home. I hooked it up from the wall port, to the router, to my computer. I was able to access the normal Linksys wireless setup page at 192.168.0.1 and set up a network fine. I then unplugged my ethernet cable and attempted to connect to the network and was not able to. If I recall, it 'connected' but there was no internet connection.
View 7 Replies View Relatedi have desktop with internet connection via cable to ADSL2+ Router and 2 laptop with internet connection via wirless to Wireless Access Point which is connected to the ADSL2+ Router
Uploaded with [URL] how i share files between desktop and one of laptops or between the two laptops
Why does my HP LaserJet P2015dn not print? It says Printer Offline. I am using Windows 7 but this has happened before with other versions of Windows and I have had to have it fixed. There is another computer connected to the printer.
View 1 Replies View RelatedHey, I've recently reinstalled my Windows 7 Home Premium and I since my PC does not detect the router.I've tried using a SKY recovery disk, but that failed and nothing happened. Do I need to download a specific driver so the PC can detect the router?
View 5 Replies View RelatedJust did a clean windows 7 x64 installation on a build a box computer with a new hard drive. Install went fine. Plugged it in to my 3 month old Linksys Wireless G Broadband Router (WRT54GL) and it doesn't recognize that there is any connection at all. Windows says "No connections are available" and troubleshooting can't identify the problem. The light on the router and on the computer comes on. I am running a wired connected XP computer and 2 Win 7 x32 wireless connected computers just fine. Ran ipconfig /all and it came up as follows:
Host Name.................... : Bottomdweller-PC
Primary DNS suffix.......... :
Node Type ....................: Hybrid
[Code]....
All wires are connected. I've tried booting in Safe mode with networking. I've even connected the computer directly to the cablevision modem. I've installed a USB Linksys wireless adapter and although it installs fine, it doesn't see the router at all. I've also tried reinstalling the router directly on this computer but it doesn't see the router at all.
I've tried setting up a new connection or network, Connecting to a network and choosing a homegroup and sharing option but since you need a network to connect to first I couldn't do it.
i have a 1800 gateway sbc router. how do i connect to it
View 1 Replies View RelatedI have a Dlink wired router. Should I use a software driven firewall or is the Dlink firewall sufficient?
View 1 Replies View RelatedWhat are my options for connecting a laptop wirelessly to a workstation that is connected to a wired LAN and has no router?Essentially, I want to add wireless connectivity to the workstation so that the laptop can connect to the wired LAN via the workstation.
View 2 Replies View RelatedLast Friday my main desktop crashed (lost power to the machine) and on restarting the PC was unable to "identify" the network. By identify, I mean, when using "Network and Sharing Centre" on the basic network information page, the PC shows "Identifying" under "active networks" - no matter how long I leave the PC.
PC details
Model: Packard Bell Power x-30
Processor i7 870 @2.93GHz
RAM: 8GB
O/S: Windows 7 Home Premium (64-bit)
Modem Router details
Netgear N300 Wireless Dual Band ADSL2+ Modem Router
The main desktop is connected to the modem router (via Ethernet). The modem router is showing no sign of any problems itself, all the dashboard lights look ok (i.e. power is on, port 1 shows the Ethernet connection in place, both wireless bands are lit, the DSL is lit and so is the internet). The household contains a number of laptops which continue to work ok wirelessly and/or wired through Ethernet. Even mobile phones are accessing the wi-fi ok.
The DNS Server address looks ok, as that is the address of the web page to the router. I cannot access that web page (address) via the main desktop, but I can from other devices ok. Having gone through Device Manager the Realtek PCIe GBE Family Controller is showing as "working properly". I have tried pinging the DNS Server address, and that fail. I have gone through a system restore to a previous point (before the day of the crash) but that seems to have made no difference either.
I have attempted to set the IP addresses (for TCP/IPv4) directly
IP address 192.168.0.3
Subnet mask: 255.255.255.0
Default Gateway: 192.168.0.1
And therefore forced to set the DNS Server address too
Preferred DNS server: 192.68.0.1
But I don't know what to set for the alternate DNS Server, so left blank. This seems to step me forward, in that the device/network is now identified. However the internet access is still not work, as the "DNS Server is not responding".
For some reason my router and modem will not show correctly on my dell inspirion one desktop. Im running windows 7 and here are the net work connection deatils
Connection -specific DNS Belkin
Description Realtek PCIe GBE Family Controller
Physical Address 00-00-00-00-00-00
DCHP Enabled Yes
Ipv4 Address 192.168.2.2
Ipv4 Subnet Mask 255.255.255.0
Lease obtained Wednesday, November 10, 2010 9:45 PM
Lease Expires Sunday, December 18, 2146 4:17 AM
IPv4 Default Gateway 192.168.2.1
Ipv4 DHCP Server 192.168.2.1
Ipv4 DNS Server 192.168.2.1
IPv4 WINS Server
NetBIOS over Tcpip enabled Yes
The Connection was working about ten days ago and then suddenly stopped and read as an unidentified network no internet access. at one point is was not receiving packets but now it is but it still says no internet access on the IPv4 Connectivity. Media state is also enabled and the speed is 100.0 Mbps when i troubleshoot it says windows cant identify problem but in the details it says default gateway is available. when i use the cmd prompt ipconfig/all my local ethernet adapter has a physical address of all zeros.
I need assistance with my router, serial # CSV01H7A3323 broad band router. I do not remember the password
View 2 Replies View RelatedIn a few days time I will be changing my ISP in the UK from Sky to BT.
BT are providing me with their newest wireless router free of charge as part of the deal and I'll be using that to set up my wireless network, which will consist of an HP Pavilion desktop, a Toshiba laptop, a Sony Vaio laptop, an HP wireless printer and a Samsung HDTV.
This means my Sky wireless router is surplus to requirements, so I was wondering if I could convert it to a wireless access point to improve the range of my BT wireless network.
I've read a couple of supposedly easy-to-understand articles on Google and have to say they left me more confused than ever.
how to configure my wireless router WNR500 to my existing wireless network
View 1 Replies View RelatedIs there a way to setup your computer to connect only to a specific wireless router in your area? I live in a college dorm and there are a lot of wireless connects available so I'm thinking that there might be complications with my computer with all the information in the air.
View 3 Replies View RelatedI was wondering to myself in Wal-Mart if I should get myself one of those USB routers for my Nintendo DSi, PSP and laptop computer. I mean I would love to have one so i can use the browsers in them and for updating/online gaming. but at the same time I think that since I have dial up it would be a waste of money to buy something that SHOULD be used on a cable/satellite connection. I was wondering if I could get your opinion on the matter, cause I can't come up with an answer myself.
View 1 Replies View RelatedI just completed a new windows 7 64 build and would like to purchase a wireless adapter for my "dream machine." My router is a buffalo WHR-G54S "g" router. I do not have any "n" wireless in my home yet. Any suggestions for something that has proven to be stable and trouble free with windows 7 x64?
View 1 Replies View RelatedI have just done my quarterly full system wipe on my laptop,and have lost my little sticker with the router details on.Is there any way of finding out what wpa key is by going into the 192.168------ router set up number?
View 6 Replies View RelatedI finally got Windows 7 reinstalled again, but now I can connect to my wireless router.
I tried setting up a new wireless network, for some reason it's trying to do a WAN miniport (PPPOE)
That doesn't look familiar from before? But either way once I enter username & password it isn't connecting?
I recently built my own gaming pc, spec'd as follows:
Asus Rampage IV Formula
Win 7 Ultimate 64 bit
I73930k
GTX 680
120gb ssd
etc.
I have installed Win 7 Ultimate 64 bit with no real problems. Except the internet connection! I have Sky Broadband which has a Sky router. I can connect my laptop wirelessly so i know it works ok. The only way my 'new' desktop will connect to the Sky router is by using an Ethernet cable. It simply cannot connect to it wirelessly.
My Comcast router is wireless and I would like to use my old Netgear router to receiver the signal so that I can use two computers in my basement that do not have wireless cards. Can the router be setup to receive the signal and distribute it even though it was designed to do the opposite?
View 9 Replies View RelatedI've just bought a new wireless router as we were having trouble with our old one cutting out etc, the only problem is with the new wireless router it keeps saying DNS isn't responding and there is no interent access but the wireless connects to the computers, but then if we plug our old one back in it connects straight away
View 2 Replies View RelatedI have a new pc by HP,using windows 7.I do not have a wireless router, I have a modem from my ISP. Hughesnet.com, address is 192.168.0.1.Why do I keep getting messages about a wireless router. I
m just trying to connect to HughesNet.What should I do?
3 laptops on same wireless network 1 xp 1 vista 1 windows 7.xp and vista fine but windows 7 runs very very slowly but doesn't disconnect
View 1 Replies View RelatedI want to connect to a wireless router (not ours)and although the connection is available I don't know the network security key so can't connect...
View 1 Replies View RelatedI have a D-Link DI 624 installed. It worked on all computer, but has stopped working on my HP with Window 7
View 2 Replies View RelatedI unpluged ny old router and tried to install the new wireless one but it did not work and now I cannot un install it to try again
View 2 Replies View RelatedHow to configure smc wireless router
View 1 Replies View Related