Hey, I've recently reinstalled my Windows 7 Home Premium and I since my PC does not detect the router.I've tried using a SKY recovery disk, but that failed and nothing happened. Do I need to download a specific driver so the PC can detect the router?
View 5 RepliesJust did a clean windows 7 x64 installation on a build a box computer with a new hard drive. Install went fine. Plugged it in to my 3 month old Linksys Wireless G Broadband Router (WRT54GL) and it doesn't recognize that there is any connection at all. Windows says "No connections are available" and troubleshooting can't identify the problem. The light on the router and on the computer comes on. I am running a wired connected XP computer and 2 Win 7 x32 wireless connected computers just fine. Ran ipconfig /all and it came up as follows:
Host Name.................... : Bottomdweller-PC
Primary DNS suffix.......... :
Node Type ....................: Hybrid
[Code]....
All wires are connected. I've tried booting in Safe mode with networking. I've even connected the computer directly to the cablevision modem. I've installed a USB Linksys wireless adapter and although it installs fine, it doesn't see the router at all. I've also tried reinstalling the router directly on this computer but it doesn't see the router at all.
I've tried setting up a new connection or network, Connecting to a network and choosing a homegroup and sharing option but since you need a network to connect to first I couldn't do it.
What are my options for connecting a laptop wirelessly to a workstation that is connected to a wired LAN and has no router?Essentially, I want to add wireless connectivity to the workstation so that the laptop can connect to the wired LAN via the workstation.
View 2 Replies View RelatedLast Friday my main desktop crashed (lost power to the machine) and on restarting the PC was unable to "identify" the network. By identify, I mean, when using "Network and Sharing Centre" on the basic network information page, the PC shows "Identifying" under "active networks" - no matter how long I leave the PC.
PC details
Model: Packard Bell Power x-30
Processor i7 870 @2.93GHz
RAM: 8GB
O/S: Windows 7 Home Premium (64-bit)
Modem Router details
Netgear N300 Wireless Dual Band ADSL2+ Modem Router
The main desktop is connected to the modem router (via Ethernet). The modem router is showing no sign of any problems itself, all the dashboard lights look ok (i.e. power is on, port 1 shows the Ethernet connection in place, both wireless bands are lit, the DSL is lit and so is the internet). The household contains a number of laptops which continue to work ok wirelessly and/or wired through Ethernet. Even mobile phones are accessing the wi-fi ok.
The DNS Server address looks ok, as that is the address of the web page to the router. I cannot access that web page (address) via the main desktop, but I can from other devices ok. Having gone through Device Manager the Realtek PCIe GBE Family Controller is showing as "working properly". I have tried pinging the DNS Server address, and that fail. I have gone through a system restore to a previous point (before the day of the crash) but that seems to have made no difference either.
I have attempted to set the IP addresses (for TCP/IPv4) directly
IP address 192.168.0.3
Subnet mask: 255.255.255.0
Default Gateway: 192.168.0.1
And therefore forced to set the DNS Server address too
Preferred DNS server: 192.68.0.1
But I don't know what to set for the alternate DNS Server, so left blank. This seems to step me forward, in that the device/network is now identified. However the internet access is still not work, as the "DNS Server is not responding".
For some reason my router and modem will not show correctly on my dell inspirion one desktop. Im running windows 7 and here are the net work connection deatils
Connection -specific DNS Belkin
Description Realtek PCIe GBE Family Controller
Physical Address 00-00-00-00-00-00
DCHP Enabled Yes
Ipv4 Address 192.168.2.2
Ipv4 Subnet Mask 255.255.255.0
Lease obtained Wednesday, November 10, 2010 9:45 PM
Lease Expires Sunday, December 18, 2146 4:17 AM
IPv4 Default Gateway 192.168.2.1
Ipv4 DHCP Server 192.168.2.1
Ipv4 DNS Server 192.168.2.1
IPv4 WINS Server
NetBIOS over Tcpip enabled Yes
The Connection was working about ten days ago and then suddenly stopped and read as an unidentified network no internet access. at one point is was not receiving packets but now it is but it still says no internet access on the IPv4 Connectivity. Media state is also enabled and the speed is 100.0 Mbps when i troubleshoot it says windows cant identify problem but in the details it says default gateway is available. when i use the cmd prompt ipconfig/all my local ethernet adapter has a physical address of all zeros.
i had created a work group of five to six computer through a wirless and wired router provided by the isp but the problem is when ever i try to connect my windows 7 pc to win xp pc it say enter network password which i have tried what was mentioned in every forum but the result is same any had tried it and got a better idea please help is needed other wise i am able to connect to win 7 from win xp by wireless and wired also
View 2 Replies View Relatedbelkin router unable to connect to certain web sites by hard wire,but can access through the wireless side with the same computer with windows 7 and firefox or internet explorer
View 2 Replies View RelatedI have a Lenovo, Windows 7 Home premium 32bit. McAfee controlling my firewall. Unable to connect to internet. Connects to my wireless network. Timewarner has given up since my other HP xp computer works. Router has problems but works OK with my HP and vonage devices.
The router is D-Link WBR-1510. finding if this router is compatible to Win 7?
How do I "blow out the NIC"? How do I identify devices from drivers to uninstall?
I had an existing pc with windows xp home. I just purchased a new pc with windows 7 home. Why I connected the windows 7 pc to the internet using dlink router I was able to access the internet. On the next day though, when I tried to connect again, I was not able to access the internet. Here are the tasks that I have already carried out to check the connectivity.
1. The windows 7 computer has a valid IP address, which means that ARP is working fine and my router is dispensing the addresses correctly.
2. When I try to ping the modem-router, there is no reply. So I am not able to access router using ICMP.
3. My old windows xp pc is able to connect and browse the internet. The problem is only with my new windows 7 pc.
To view Netflix or Amazon movies which type of router am I better off with?
View 3 Replies View RelatedI am having problems with my wireless adapter Cisco Router Linksys X2000, can I use it as a wired router into my network socket on the computer?
View 3 Replies View RelatedI need to switch from a wired network to a wireless network. Santa is bringing a new laptop. I guess the best way is to change routers. Not sure what to go with.I currently have 2 desktops, PS3 and a TV on the wired network. Ive looked at and read the reviews on a Linksys-Newegg.com - LINKSYS E3000 Wireless Router simultaneous Dual Band Gigabit 802.11a/b/g/n 2.4GHz / 5GHz up to 300Mbps with USB Built-in UPnP AV Media Server and an Asus-Newegg.com - ASUS RT-N16 Wireless Router 802.11b/g/n up to 300Mbps DD-WRT Open Source support with USB Storage, Printer And Media Server.For the most part the reviews are good but there a bunch of bad ones. Just wondering if any one brand is considered more reliable than the others. I don't know anything about open source firmware. Its mentioned quite a bit in the reviews.
View 5 Replies View RelatedI have a Dlink wired router. Should I use a software driven firewall or is the Dlink firewall sufficient?
View 1 Replies View RelatedI have a wired linksys router that works fine. I'm not using DHCP on it, its setup at 192.168.1.1. My pc which only has a wired NIC, connects with no problems.I recently bought a tplink wireless router. I changed it so the ip is now 192.168.1.254 (it was 192.168.0.254 originally which meant I couldnt access settings to change from the default password, SSID).
I got the tplink wireless router, so I wouldnt have to be tethered with a wire on my laptop for internet. However, I've wasted time with tech support which I can barely hear or understand.I'd like to get this working, otherwise I'm sending everything back, wireless router and laptop.I can ping both the linksys and tplink from my laptop with no problems.I can get connected to the tplink wireless router without a problem but I cannot get to the internet.
I have been trying to set up a router at my girlfriend's apartment. I first tried a Linksys router that I had brought from home. I hooked it up from the wall port, to the router, to my computer. I was able to access the normal Linksys wireless setup page at 192.168.0.1 and set up a network fine. I then unplugged my ethernet cable and attempted to connect to the network and was not able to. If I recall, it 'connected' but there was no internet connection.
View 7 Replies View Relatedi have desktop with internet connection via cable to ADSL2+ Router and 2 laptop with internet connection via wirless to Wireless Access Point which is connected to the ADSL2+ Router
Uploaded with [URL] how i share files between desktop and one of laptops or between the two laptops
Why does my HP LaserJet P2015dn not print? It says Printer Offline. I am using Windows 7 but this has happened before with other versions of Windows and I have had to have it fixed. There is another computer connected to the printer.
View 1 Replies View RelatedI need assistance with my router, serial # CSV01H7A3323 broad band router. I do not remember the password
View 2 Replies View RelatedI've been trying to create a homegroup which my laptop (wireless) and my computer (wired) will be part of. They are both connected to the same router. My wireless is called "BuckleyWireless" and my wired computer is connected to something called "VirginMedia478xxx". I'm not sure whether these have to be the same name for it to work so I thought I'd post this anyway.I've checked the subnet mask for both computers and they are the same.I've tried turning off the firewalls on both computers.I've gone into advanced settings so that both computers are "visible" within the network.My laptop is now visible on my wired computer but it can't actually be accessed for some reason.
View 3 Replies View RelatedI disconnected my wired internet on my pc by right clicking on the internet icon down on the right toolbar and therefrom i disconnected. Right now I can't connect it back. I've tried unplugg and plugg it in (not working) and restarting the pc (again, not working).
View 2 Replies View RelatedI can connect to wi-fi, but not to other the internet. A wired connection will not connect to the internet either. Other devices (ipad, laptop, directv box, etc... all connect fine. Using the network map I can see the other devices on my network from this pc. If I run in safe mode with networking I can connect to the internet.
Windows firewall is disabled, using McAfee firewall. I momentarily disabled all firewalls and still unable to connect to the internet. I have scanned the computer (in safe mode) with McAfee, Malware Malybytes, & the MS Windows malicous software scanner. All clean. I was thinking virus or malware, but have done everything I can think of.
Me again, so I know why the Windows 7 HP PC in my last thread won't connect to a wired network here at work, however I've just tried to connect this PC (which is running Windows 7 Professional 32 bit, 2.6Ghz Quad core, 4GB RAM (it's an Acer Veriton X275)) and I get the same stuff. It sees an unidentifed local area connection but it tells me there is no internet access and no network access. Not only is this annoying, but having just got the company to spend over �450 on copies of Windows 7 Pro for 4 other PCs (as well as memory upgrades for 2) it's more than a little worrying!
why this Windows 7 PRO PC won't connect to a wired network? Server PC is running Windows Server 2000, coming through a Netgear switch.
I have windows XP mode installed on Window 7 Enterprise and running Windows XP ofcorce. I need to connect my laptop to wired network and in some time to connect wireless for XP mode using. What I mean : I want to use wired internet for my Windows 7 and in same time wireless network for windows XP in XP mode that is running. This I need because those two windows need to be connected in different networks.
View 1 Replies View RelatedMy Desktop is connected to a NetGear Router and is on a DLS line to internet. My wireless laptop picks up signal ok and goes online, it also "sees" desktop name, but I can't connect to it for file and printer sharing.
View 2 Replies View RelatedMy PC connects to the internet (wired) perfectly, but my TOSHIBA laptop does not. The router does not show the correct lights when plugged into the laptop, so I have tried resetting the router (with no success). When I plug the ethernet cable into the laptop, nothing happens at all.
View 19 Replies View RelatedI currenly work in an IT department and have given this 'project'.
We have a number of users who have been given 32bit Windows 7 laptops for remote, home and office working.
I have been asked to create a batch file so that as soon as the user comes into the office they plug the laptop into the network and it should use the wired connection automatically to access the corporate LAN. As soon as they work away and need to access the corporate network remotly they do not need to press the wireless button on the laptop, when the laptop is switched and logged on i want the laptop to know that it is not on a wired network and for the wireless to kick in.
I have created two bat files -
netsh interface set interface �Wireless Network Connection� Disable
and
netsh interface set interface �Wireless Network Connection� Enable
these have been placed in task scheduler under create a basic task. I have tried both of these in cmd prompt but they still don't work.
My Windows 7 laptop works Fine at home on my broadband with a wired connection, When I take my laptop downtown and try to connect to a company network, via a wire, windows 7 fails to find the connection.
View 1 Replies View RelatedI have a new Windows 7 (HP) laptop normally connecting to a Netgear WNDR3700v2 router wirelessly. There is also windows XP-Pro file server, an XP thin client (running phone system) connected to the router via Ethernet. Finally, there is a 500GB USB drive plugged into to the router's USB ReadyShare port.
When the laptop is connected via Ethernet it can see and communicate with all Ethernet devices and all Ethernet devices can connect with the wireless laptop including the routers ReadyShare USB storage. All connectivity appears normal and shares are valid and recognized.
When the laptop is connected wirelessly, all wired devices continue to recognize it normally but can NOT communicate with it. The laptop sees nothing but the router's gateway. It does not recognize any other device connected to the router wirelessly or via Ethernet and does not recognize the USB storage connected to the router via ReadyShare.
It should be noted that the Netgear WNDR3700v2 router does see all wired and wireless devices. Also note that network discovery and file sharing is enabled on the laptop.
Netgear has assured me that all is well with the router (and I agree). I believe the problem is with Windows 7 wireless settings but this is the first Windows 7 device we have and I just don't know enough about the OS to know where to look to correct the problem.
how do i connect a wired router to my hp laptop
View 4 Replies View RelatedMy netbook shows signals from others in the area but shows a red X next to my router connection. I can't seem to get connected to my own wireless router
View 1 Replies View RelatedCan anyone advise how I would go about fixing this. I am trying to connect to a network (I have a dell running on windows 7) and it keeps telling me that windows is unable to connect to the network-this is before I can even enter the security key. I know it is not a problem with the wireless because other people are able to connect to it fine.
View 2 Replies View Related