How To Connect To Router Via Internet
Jul 1, 2012how i can connect to my router in my home when im using internet outside for example in my office
View 4 Replieshow i can connect to my router in my home when im using internet outside for example in my office
View 4 RepliesJust did a clean windows 7 x64 installation on a build a box computer with a new hard drive. Install went fine. Plugged it in to my 3 month old Linksys Wireless G Broadband Router (WRT54GL) and it doesn't recognize that there is any connection at all. Windows says "No connections are available" and troubleshooting can't identify the problem. The light on the router and on the computer comes on. I am running a wired connected XP computer and 2 Win 7 x32 wireless connected computers just fine. Ran ipconfig /all and it came up as follows:
Host Name.................... : Bottomdweller-PC
Primary DNS suffix.......... :
Node Type ....................: Hybrid
[Code]....
All wires are connected. I've tried booting in Safe mode with networking. I've even connected the computer directly to the cablevision modem. I've installed a USB Linksys wireless adapter and although it installs fine, it doesn't see the router at all. I've also tried reinstalling the router directly on this computer but it doesn't see the router at all.
I've tried setting up a new connection or network, Connecting to a network and choosing a homegroup and sharing option but since you need a network to connect to first I couldn't do it.
Same wifi network works on my laptop but not my desktop. Running the troubleshooter on my desktop comes up with no errors. My ipconfig /all is below.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersMike>ipconfig /all
Windows IP Configuration
[code]....
I am running windows 7, 64 bit and have been having an issue with my Linksys E1500 router recently that has my ISP
My router will respond to pings from my laptop both wirelessly and when connected via ethernet cable, and will respond to pings from my ISP, but it won't allow my laptop to connect to the internet. I have rest and reconfigured the router a bunch of times, leaving the MAC address alone, cloning it to my laptop's ethernet port, and cloning it to my wireless cards MAC addresses, respectively. None of that allows it to connect. Linksys (Cisco) has been useless in helping both via their site and when contacted, encouraging me to pay $40 to talk to someone who MAY be able to help.
Note: The router worked fine for about 4 months, then one morning, couldn't connect to the internet through it. Have to connect directly from the modem via ethernet cable.
Not my week so far yet another problem. Been trying all day to connect to the internet with the above router.Happened accross a screen saying Firewall settings.It says for the inbound services "BLOCK always" is this my problem?I have tried to amend this to " ALLOW always" to which the outbound services are already set.My next problem is it is asking for the inbound services to be adjusted so I have setthe service parameter to ALL, action ALLOW always but now is the problem it wants an address putting into the 4 boxes for the Send to LAN Server parameter,I have tried various setting but to no avail. Exactly where can I get this information from?
View 5 Replies View RelatedI have a netgear wireless router upstairs. My dell laptop, my iMac (which is downstairs) and my iPad/iPhones all connect anywhere in the house. My Toshiba laptop and my work dell will not connect or it connects very intermittently. I can stay connected for days on other wifi networks, just not at home. Any ideas?
View 6 Replies View RelatedFor some reason my router and modem will not show correctly on my dell inspirion one desktop. Im running windows 7 and here are the net work connection deatils
Connection -specific DNS Belkin
Description Realtek PCIe GBE Family Controller
Physical Address 00-00-00-00-00-00
DCHP Enabled Yes
Ipv4 Address 192.168.2.2
Ipv4 Subnet Mask 255.255.255.0
Lease obtained Wednesday, November 10, 2010 9:45 PM
Lease Expires Sunday, December 18, 2146 4:17 AM
IPv4 Default Gateway 192.168.2.1
Ipv4 DHCP Server 192.168.2.1
Ipv4 DNS Server 192.168.2.1
IPv4 WINS Server
NetBIOS over Tcpip enabled Yes
The Connection was working about ten days ago and then suddenly stopped and read as an unidentified network no internet access. at one point is was not receiving packets but now it is but it still says no internet access on the IPv4 Connectivity. Media state is also enabled and the speed is 100.0 Mbps when i troubleshoot it says windows cant identify problem but in the details it says default gateway is available. when i use the cmd prompt ipconfig/all my local ethernet adapter has a physical address of all zeros.
I need assistance with my router, serial # CSV01H7A3323 broad band router. I do not remember the password
View 2 Replies View Relatedhow do i connect a wired router to my hp laptop
View 4 Replies View RelatedMy netbook shows signals from others in the area but shows a red X next to my router connection. I can't seem to get connected to my own wireless router
View 1 Replies View RelatedI have CANYON 11g AP Router which is conencted to this PC and a Windows 7 PC (my workstation). Last night the providers connection dropped so after finishing my work I didn't stand around to check if the internet will be back and closed it. This morning my girlfriend tried to unplug something and accidentally unplugged the router. Ever since that happened, this PC, running XP has no internet connection issues. Unfortunately, the Windows 7 PC cannot connect to the Internet. I tried disabling and enabling, it ahs a clear connection towards "Multiple networks", but from there to the "Internet" it does not connect. I also tried a diagnostics and a firewall deactivation but still no luck. My Netwpork meter gadgetr shows my Int. IP as 192.168.1.2 and my Ext. IP as NO CONNECTION.When I try to connect to the internet it appears that Mozilla finds the website but cannot conenct to it. At least that's what I think, since it is stuck on "Connecting" and not on "Looking up". Ipconfig does not work, it only shows the window for a brief second, then auto closes.
View 6 Replies View RelatedSo everything was fine until today when I woke up. My internet wouldn't work, it was saying that I was connected with internet access but never gave me it. I checked my router settings and it shows all the correct things.
So then, I decided to check my brother's computer which is in the same room and he couldn't connect either. I turned my computer off and somehow, my brother's computer had internet access and could access the internet.
Posting from my brother's PC now. I have attempted everything, restarted the power to everything about 5 times. Our internet has always worked and has until today.
that is the question if you have a N router and connect a G device your speed drops down to G but which are the numbers in mbs?
View 9 Replies View RelatedCan't connect my Xbox to my router.I've just brought a new router.It is a Tenda W311R Wireless N Cable DSL Broadband Router.But I can't connect it to my Xbox 360 S.I've managed to add my PC, Laptop, and PS3 to my home network without any difficulty however.I've encrypted my home network with WPA2 as recommended by Microsoft.These are the steps I took when trying to add my xbox 360 S console to my home network:
1. On the console I went to My Xbox
2. Then System Settings.
3. Network Settings
4. Scan for Networks
4. My router was listed so I selected it
5. I then entered my WPA2 wireless password
6. Then I selected Test Xbox Live Connection.
The console then said it couldn't connect to my wireless network. I was thinking that the Xbox 360 S console's built-in Wi-Fi uses the 2.4 gigahertz frequency band. Maybe my router is broadcasting using another frequency... But I have yet to check what that frequency is.
I just bought a brand new Dell Inspiron 15r.. (was using an HP mini before Dell, had same issue) It has Windows 7..The router is a Belkin G Model F5F7234-4... Co worker can connect, this router used to be in his home so he configured it then and just brought it to work and didnt have to do anything but plug and play.. then i came along and couldnt connect..Im currently using the internet on my Dell connected by my EVO with PDANET..When i came in with my Dell i automatically tried connecting with out any set up, usually works perfect anywhere i go.. but keeps showing unidentified network and showing it as a public access... iv googled and read everything from disable mcafee and try connecting with the ethernet cable... before i had a cable i tried running belkin setup assistant cd and it would say no connection to router.. i finally got ahold of an extra cable today and tried that in to set it up with the cd while wired, at first it showed on the laptop it was wired and i put in the belkin setup assistant cd and it would just keep looking for the router,(now just showed wired on router but not on computer) then tried manual set up where IE popped up with http://192.168.2.1/ in the address bar, but wouldnt connect.. tried to diagnose everything every time.. it keeps saying can not connect via net work adapter or LAN does not have valid ip address... iv reset and or disabled then enabled everything.. i have all passwords and pins to the router.. i would keep using my pdanet but trial is up and its gonna cut off on me soon like last week, it keeps messing with me.. but why pay for it or use it when i have a perfectly good network to connect to at work!
View 2 Replies View RelatedI recently built my own gaming pc, spec'd as follows:
Asus Rampage IV Formula
Win 7 Ultimate 64 bit
I73930k
GTX 680
120gb ssd
etc.
I have installed Win 7 Ultimate 64 bit with no real problems. Except the internet connection! I have Sky Broadband which has a Sky router. I can connect my laptop wirelessly so i know it works ok. The only way my 'new' desktop will connect to the Sky router is by using an Ethernet cable. It simply cannot connect to it wirelessly.
I work in a small office and use a laptop with Windows 7. We use the same router and have wired internet. His computer is connected to a "Network 4" while mine is connected to the private wireless internet system we've set up. He can't connect to any other connections on his computer while all the other connections around our office is visible on my laptop.
View 1 Replies View RelatedI have a D-LiNK router I want to connect two pcs to it through LAN when I do. one of them connects to the internet and the other not i tried to set the ip to obtained manually i gave one 192.168.1.100 and the other 192.168.1.10 and I gave the primary DNS to preferred DNS server and the secondary DNS to alternative DNS server and it didn't work too.
View 2 Replies View RelatedWell, I have a Satellite I355D-S7825. I checked under Device Manager and I only see the local ethernet connection I'm using, and it won't wirelessly connect anymore...I'm not sure what to do, or what driver to update or how.
View 8 Replies View RelatedHey, I've recently reinstalled my Windows 7 Home Premium and I since my PC does not detect the router.I've tried using a SKY recovery disk, but that failed and nothing happened. Do I need to download a specific driver so the PC can detect the router?
View 5 Replies View RelatedGot a new Asus laptop. Tried to connect to wireless router, but I always get no network access and an unidentified network. Some data points: I have a D-Link DIR-625. This could be the problem since it is from 2007, but technically it is compatible with Windows 7. All other devices (Windows XP laptops, smartphones, etc.) connect with no problem to the wireless router. The LAN on the new laptop connects fine to the router when I plug it in. Only the wireless does not work. I have read online forums for 4 hours trying to figure things out but haven't had luck. I think I've tried everything. I have attached the ipconfig /all below. Oh, and my computer does not have Bonjour installed, which apparently has caused this issue for others.
Windows IP Configuration
Host Name . . . . . . . . . . . . : VC-PC
Primary Dns Suffix . . . . . . . :
[Code].....
i had created a work group of five to six computer through a wirless and wired router provided by the isp but the problem is when ever i try to connect my windows 7 pc to win xp pc it say enter network password which i have tried what was mentioned in every forum but the result is same any had tried it and got a better idea please help is needed other wise i am able to connect to win 7 from win xp by wireless and wired also
View 2 Replies View RelatedI have a linksys router which I never secured with a password. I was able to use it with no issues until I added a password. The router works fine, I've connected my phone , Xbox, and laptop with no issues. My upstairs computer in the other hand I can not connect. It asks for my password and does not connect. It also asks for network authentication.
View 1 Replies View RelatedI recently started using a computer with Windows 7. I have a linksys modem that is wired to a Wireless router and the computer is wired to the router.
After the Windows 7 upgrade, the wireless router stopped working for both wired computers and wireless connections. If I bypass the router and run directly from the modem I get Internet connection again.
I attempted to replace the wireless router with a new one and it's the same issue.
I've disabled IPv6 and tried to manually configure DNS and still no go.
Any thoughts on what may have gone wrong after upgrading to Windows 7 or why the router would suddenly stop working?
i don,t know how do i connect to wireless router to my computer
View 2 Replies View Relatedhow cn i open 192.168.1.1 to change my password on wireless connection?cn somebody help pls..
View 3 Replies View RelatedI have both of these things and my recent internet still come up on my laptop, how can i connect or use my router to get wifi, need this for work asap.
View 4 Replies View Relatedwhat procedure do i go through to get connected to adim to log in
View 2 Replies View Relatedbelkin router unable to connect to certain web sites by hard wire,but can access through the wireless side with the same computer with windows 7 and firefox or internet explorer
View 2 Replies View RelatedI am having trouble connecting my girlfriends laptop to the internet using her Windows 7 laptop via a Dlink router with Virgin Media. The laptop previously had Windows Vista installed but I recently upgraded it to Windows 7. For about 2 weeks the laptop connected to the wireless router fine, but stopped working about 4 days ago for some unknown reason out of the blue.
We have tried various methods to fix it, including disabling the wireless network adapter and enabling it again, we have tried updating the driver for the adapter but we get a message saying that the driver currently installed is the latest driver. It also won't let me roll back to the previous driver as that option is faded out in the properties box.
I have took her laptop to my house today to try and connect it to my router (which is also with Virgin and is working fine on my computers at my house) and the laptop won't let me connect to the network and it keeps saying there are no network connections available. I understand that usually it displays a list of connections you can log on to, but the laptop is not finding any connections at all.
On Thursday we attempted to connect to the internet by plugging in the blue wire that came with the router and that works fine. It's just it will not connect wirelessly. What really baffles us with this problem is that it worked fine for a couple of weeks then suddenly stopped working. Could it be an update that was installed that has caused the problem perhaps?
I have also tried using System Restore but that hasn't fixed the problem either. The wireless adapter is called: Atheros AR5005G Wirelss Network Adapter.
All three of my computers at home (all on windows 7 ultimate 64bit) are connecting to the same router with same SSID, but they end up having duplicate names such as NetworkName 1, NetworkName 2, NetworkName 3. This is preventing me from having them share via homegroup. I made sure the computer names are all different and all connect to same workgroup name. Is this a router setting problem? i'm using a cisco-linksys wrt-160n flashed with DD-WRT. i was checking the settings and ran across a new term, vlan. could it be they are all connected to separate virtual networks? i tried to disable vlan, however, that just disconnected all the computers to the internet.
View 2 Replies View Related