Cannot Connect To Linksys Router Web Page
Dec 5, 2012how cn i open 192.168.1.1 to change my password on wireless connection?cn somebody help pls..
View 3 Replieshow cn i open 192.168.1.1 to change my password on wireless connection?cn somebody help pls..
View 3 RepliesI am running windows 7, 64 bit and have been having an issue with my Linksys E1500 router recently that has my ISP
My router will respond to pings from my laptop both wirelessly and when connected via ethernet cable, and will respond to pings from my ISP, but it won't allow my laptop to connect to the internet. I have rest and reconfigured the router a bunch of times, leaving the MAC address alone, cloning it to my laptop's ethernet port, and cloning it to my wireless cards MAC addresses, respectively. None of that allows it to connect. Linksys (Cisco) has been useless in helping both via their site and when contacted, encouraging me to pay $40 to talk to someone who MAY be able to help.
Note: The router worked fine for about 4 months, then one morning, couldn't connect to the internet through it. Have to connect directly from the modem via ethernet cable.
i have a linksys router and i need to know how to reconfigure it...
View 4 Replies View RelatedI finally have my comp back up and running. I need to know if there is a way to configure tomato on my router so it gets the best performance. Is there a tut somewhere or a pdf? I hear it is really good but I have no knowledge of using it.
View 2 Replies View RelatedI have no idea what my username and password for linksys router are. I tried to connect to http://192.168.1.1/ using defult (admin, admin) or (blank, admin) but had no luck. How can I reset the username and pass for the router in order to get acces to the settings?
View 3 Replies View RelatedI recently purchased a new desktop and it came with windows 7. I am having trouble hooking up my router, it will not allow me to access the Internet through the router. I have a Linksys BEFW11S4 (I know it's a dinosaur but I've never had issues before) The router will not even install. Upon further investigation I've discovered that my problem may lie with Windows 7.
View 3 Replies View RelatedI now have windows 7 and am trying to find the drivers for my wireless linksys wrt54g v8 router..
View 1 Replies View Relatedinstall correct procedure and can access intenet by installing wrt54g linksys router v8 to my pc os windows 7,intel core i3..
View 1 Replies View RelatedI need assistance with my router, serial # CSV01H7A3323 broad band router. I do not remember the password
View 2 Replies View RelatedHow do I connect my existing LAN which utilizes a Linksys WRT54G connecting 4 computers, 4 printers and access from several locations in the house to an Actiontec PK5000 DLL Modem/Router? I am currently connected to the Internet via a Comcast Modem, however, I am switching to Qwest which utilizes the Actiontec. I rally do not want to completely reconfigure my LAN. My operating System is Windows 7.
View 7 Replies View RelatedI just bought a Netgear WNA3100 wireless usb adapter for my HP Win 7 64 bit laptop. I have been trying for 2 and half days to figure out why my speed is slow, why i don't have a good signal, and/ or if I do have a bit of a signal to my luck, why my signal comes and goes. I don't have internet at home at the moment because I am trying to save up to go to school. I am picking up a public business signal from a block away (which I have asked for permission to use), but I only am receiving not much of a signal with the Netgear usb wireless adapter.
View 3 Replies View RelatedI've set my router on bridging mode, and now i can't access my router page. My router is a ZyXEL P602HW-D1A.
View 4 Replies View Relatedhow do i connect a wired router to my hp laptop
View 4 Replies View RelatedMy netbook shows signals from others in the area but shows a red X next to my router connection. I can't seem to get connected to my own wireless router
View 1 Replies View Related9 times out of 10 i cannot get pages to load they are either "Timed out" or "Can not connect to server" & the latest one is "firefox has ??????? in a way that it will never be able to connect" Can't remember the ?????? part, messages along these lines, My signal strength is full & when i run trouble shooter it comes back with "No problem was found"
View 2 Replies View RelatedI have CANYON 11g AP Router which is conencted to this PC and a Windows 7 PC (my workstation). Last night the providers connection dropped so after finishing my work I didn't stand around to check if the internet will be back and closed it. This morning my girlfriend tried to unplug something and accidentally unplugged the router. Ever since that happened, this PC, running XP has no internet connection issues. Unfortunately, the Windows 7 PC cannot connect to the Internet. I tried disabling and enabling, it ahs a clear connection towards "Multiple networks", but from there to the "Internet" it does not connect. I also tried a diagnostics and a firewall deactivation but still no luck. My Netwpork meter gadgetr shows my Int. IP as 192.168.1.2 and my Ext. IP as NO CONNECTION.When I try to connect to the internet it appears that Mozilla finds the website but cannot conenct to it. At least that's what I think, since it is stuck on "Connecting" and not on "Looking up". Ipconfig does not work, it only shows the window for a brief second, then auto closes.
View 6 Replies View RelatedSo everything was fine until today when I woke up. My internet wouldn't work, it was saying that I was connected with internet access but never gave me it. I checked my router settings and it shows all the correct things.
So then, I decided to check my brother's computer which is in the same room and he couldn't connect either. I turned my computer off and somehow, my brother's computer had internet access and could access the internet.
Posting from my brother's PC now. I have attempted everything, restarted the power to everything about 5 times. Our internet has always worked and has until today.
that is the question if you have a N router and connect a G device your speed drops down to G but which are the numbers in mbs?
View 9 Replies View RelatedCan't connect my Xbox to my router.I've just brought a new router.It is a Tenda W311R Wireless N Cable DSL Broadband Router.But I can't connect it to my Xbox 360 S.I've managed to add my PC, Laptop, and PS3 to my home network without any difficulty however.I've encrypted my home network with WPA2 as recommended by Microsoft.These are the steps I took when trying to add my xbox 360 S console to my home network:
1. On the console I went to My Xbox
2. Then System Settings.
3. Network Settings
4. Scan for Networks
4. My router was listed so I selected it
5. I then entered my WPA2 wireless password
6. Then I selected Test Xbox Live Connection.
The console then said it couldn't connect to my wireless network. I was thinking that the Xbox 360 S console's built-in Wi-Fi uses the 2.4 gigahertz frequency band. Maybe my router is broadcasting using another frequency... But I have yet to check what that frequency is.
I just bought a brand new Dell Inspiron 15r.. (was using an HP mini before Dell, had same issue) It has Windows 7..The router is a Belkin G Model F5F7234-4... Co worker can connect, this router used to be in his home so he configured it then and just brought it to work and didnt have to do anything but plug and play.. then i came along and couldnt connect..Im currently using the internet on my Dell connected by my EVO with PDANET..When i came in with my Dell i automatically tried connecting with out any set up, usually works perfect anywhere i go.. but keeps showing unidentified network and showing it as a public access... iv googled and read everything from disable mcafee and try connecting with the ethernet cable... before i had a cable i tried running belkin setup assistant cd and it would say no connection to router.. i finally got ahold of an extra cable today and tried that in to set it up with the cd while wired, at first it showed on the laptop it was wired and i put in the belkin setup assistant cd and it would just keep looking for the router,(now just showed wired on router but not on computer) then tried manual set up where IE popped up with http://192.168.2.1/ in the address bar, but wouldnt connect.. tried to diagnose everything every time.. it keeps saying can not connect via net work adapter or LAN does not have valid ip address... iv reset and or disabled then enabled everything.. i have all passwords and pins to the router.. i would keep using my pdanet but trial is up and its gonna cut off on me soon like last week, it keeps messing with me.. but why pay for it or use it when i have a perfectly good network to connect to at work!
View 2 Replies View RelatedI recently built my own gaming pc, spec'd as follows:
Asus Rampage IV Formula
Win 7 Ultimate 64 bit
I73930k
GTX 680
120gb ssd
etc.
I have installed Win 7 Ultimate 64 bit with no real problems. Except the internet connection! I have Sky Broadband which has a Sky router. I can connect my laptop wirelessly so i know it works ok. The only way my 'new' desktop will connect to the Sky router is by using an Ethernet cable. It simply cannot connect to it wirelessly.
I work in a small office and use a laptop with Windows 7. We use the same router and have wired internet. His computer is connected to a "Network 4" while mine is connected to the private wireless internet system we've set up. He can't connect to any other connections on his computer while all the other connections around our office is visible on my laptop.
View 1 Replies View RelatedI have a D-LiNK router I want to connect two pcs to it through LAN when I do. one of them connects to the internet and the other not i tried to set the ip to obtained manually i gave one 192.168.1.100 and the other 192.168.1.10 and I gave the primary DNS to preferred DNS server and the secondary DNS to alternative DNS server and it didn't work too.
View 2 Replies View Relatedhow i can connect to my router in my home when im using internet outside for example in my office
View 4 Replies View RelatedWell, I have a Satellite I355D-S7825. I checked under Device Manager and I only see the local ethernet connection I'm using, and it won't wirelessly connect anymore...I'm not sure what to do, or what driver to update or how.
View 8 Replies View RelatedHey, I've recently reinstalled my Windows 7 Home Premium and I since my PC does not detect the router.I've tried using a SKY recovery disk, but that failed and nothing happened. Do I need to download a specific driver so the PC can detect the router?
View 5 Replies View RelatedJust did a clean windows 7 x64 installation on a build a box computer with a new hard drive. Install went fine. Plugged it in to my 3 month old Linksys Wireless G Broadband Router (WRT54GL) and it doesn't recognize that there is any connection at all. Windows says "No connections are available" and troubleshooting can't identify the problem. The light on the router and on the computer comes on. I am running a wired connected XP computer and 2 Win 7 x32 wireless connected computers just fine. Ran ipconfig /all and it came up as follows:
Host Name.................... : Bottomdweller-PC
Primary DNS suffix.......... :
Node Type ....................: Hybrid
[Code]....
All wires are connected. I've tried booting in Safe mode with networking. I've even connected the computer directly to the cablevision modem. I've installed a USB Linksys wireless adapter and although it installs fine, it doesn't see the router at all. I've also tried reinstalling the router directly on this computer but it doesn't see the router at all.
I've tried setting up a new connection or network, Connecting to a network and choosing a homegroup and sharing option but since you need a network to connect to first I couldn't do it.
Got a new Asus laptop. Tried to connect to wireless router, but I always get no network access and an unidentified network. Some data points: I have a D-Link DIR-625. This could be the problem since it is from 2007, but technically it is compatible with Windows 7. All other devices (Windows XP laptops, smartphones, etc.) connect with no problem to the wireless router. The LAN on the new laptop connects fine to the router when I plug it in. Only the wireless does not work. I have read online forums for 4 hours trying to figure things out but haven't had luck. I think I've tried everything. I have attached the ipconfig /all below. Oh, and my computer does not have Bonjour installed, which apparently has caused this issue for others.
Windows IP Configuration
Host Name . . . . . . . . . . . . : VC-PC
Primary Dns Suffix . . . . . . . :
[Code].....
i had created a work group of five to six computer through a wirless and wired router provided by the isp but the problem is when ever i try to connect my windows 7 pc to win xp pc it say enter network password which i have tried what was mentioned in every forum but the result is same any had tried it and got a better idea please help is needed other wise i am able to connect to win 7 from win xp by wireless and wired also
View 2 Replies View RelatedI have a linksys router which I never secured with a password. I was able to use it with no issues until I added a password. The router works fine, I've connected my phone , Xbox, and laptop with no issues. My upstairs computer in the other hand I can not connect. It asks for my password and does not connect. It also asks for network authentication.
View 1 Replies View RelatedI recently started using a computer with Windows 7. I have a linksys modem that is wired to a Wireless router and the computer is wired to the router.
After the Windows 7 upgrade, the wireless router stopped working for both wired computers and wireless connections. If I bypass the router and run directly from the modem I get Internet connection again.
I attempted to replace the wireless router with a new one and it's the same issue.
I've disabled IPv6 and tried to manually configure DNS and still no go.
Any thoughts on what may have gone wrong after upgrading to Windows 7 or why the router would suddenly stop working?