Well, I have a Satellite I355D-S7825. I checked under Device Manager and I only see the local ethernet connection I'm using, and it won't wirelessly connect anymore...I'm not sure what to do, or what driver to update or how.
View 8 Replies
What are my options for connecting a laptop wirelessly to a workstation that is connected to a wired LAN and has no router?Essentially, I want to add wireless connectivity to the workstation so that the laptop can connect to the wired LAN via the workstation.
View 2 Replies View RelatedBeen tackling this problem for over a year now, with a few installs of Windows 7 that ended up making me go back to XP. Well now I have a dual boot with XP SP3 and Win 7 HP x64. The problem is that I can't connect to the internet while using a wireless adapter on Win 7, the wired connection works with Win 7 though, and the wireless USB adapter (Zonet ZEW2546) works on XP. The only pair that doesn't work are the zonet and Win 7. I've tried just about solution I could find, to no avail. I have an EVGA P55v SLI mobo - which I've heard isn't great with wireless, but if it works with XP it should be possible with 7 too. Win 7 is a fresh install so the problem is not antivirus or another program. here is a copy of ipconfig /all (The Realtek wireless LAN utility is the USB adapter, and I am connected by wire.)
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Usersack>ipconfig /all
[Code].....
I installed my dell v305w on my new laptop successfully and was happily using it until recently. It was suddenly offline. I tried updating the drivers to no avail. So after several attempts, I removed the printer and drivers and downloaded and installed them again. I then went to start -> all programs -> dell printers -> v305 -> dell wireless setup utility and ran the utility. The wireless network was added successfully, and the wifi light on the printer was blue. Success... However, despite the signal strength on both laptop and printer being consistently good, when I attempt to print wirelessly, the laptop lists the printer as "offline". VERY FRUSTRATING! I have been trying to sort this out for 2 days! I have rebooted both printer and laptop, and that didn't work either..I can use the printer wired, but I bought it specifically because it was wireless.
View 3 Replies View RelatedI have a wireless router linksys connected to the modern witch is on the second floor. I want to connect another router linksys on the same network that the one on the second floor is on, wirelessly without any cords on the first floor.
View 15 Replies View RelatedMy girlfriends parents have bought a new compaq laptop with windows 7. Connected up to the internet by cable & wireless no problem. Yesterday couldn't do either and found it nearly impossible to get into the routers settings to check them. Kept saying limited access. I've tried various things to no avail. Then I noticed that my iphone could connect to the router, so I ruled out a router problem. I brought the laptop home and it wouldn't connect to our router, so I'm presuming it's a settings problem. But now I'm stuck!
View 14 Replies View RelatedAfter being hit with a Trojan virus, I re-installed Windows 7 Premium 32-bit.However, I now cannot connect to my wireless network. In device manager, there is a yellow triangle and ! against network controller. I have no idea what network controller I have. Speccy can only identify a Marvell Yukon network adapter but no network controller.how I can locate the driver for the controller? I have tried every trick I could find on different forums, to no avail so far.
Hardware IDs: PCIVEN_168C&DEV_002B&SUBSYS_E025105B&REV_01 PCIVEN_168C&DEV_002B&SUBSYS_E025105B PCIVEN_168C&DEV_002B&CC_028000 PCIVEN_168C&DEV_002B&CC_0280
i have a windows 7 laptop and all of my computers at home are connected to my dell server which is running windows server 2008 r2 threw wires that go to my router, now i want to add my labtop to my server connecting the labtop wireless to my wireless router and from there adding it to my server. For some reason my labtop do-sent connect to my server
View 1 Replies View RelatedMy daughter got a Security Shield virus on her laptop and I managed to remove it using this BC thread: [URL]. The laptop uses Windows 7. The removal seemed to work fine, although one slightly odd thing (compared to the thread's advice) was that I didn't have to change the LAN settings/Proxy server when I booted up in Safe Mode - the virus was preventing internet access but didn't appear to be doing so by the Proxy server change. So I was able to access the internet perfectly well when in Safe Mode with Networking.
I downloaded everything I needed using the laptop wirelesly and scanned/removed the 2 security shield virus files using malware bytes. Then, when I rebooted as normal in order to complete the process and update the HOSTS files, I couldn't access the internet wirelessly. The router is working fine and when I connect via ethernet cable the laptop communicates fine with the internet. It just refuses to let me connect wirelessly.
I have tried:
- Checking all firewall options in McAfee (though I guess this wouldn't enable a wired connection either if it was the problem)
- Removing and reinstalling the wireless device (via device manager)
- Deleting and resetting up the wireless profile
Just not sure what to do next....
I need assistance with my router, serial # CSV01H7A3323 broad band router. I do not remember the password
View 2 Replies View Relatedhow do i connect a wired router to my hp laptop
View 4 Replies View RelatedMy netbook shows signals from others in the area but shows a red X next to my router connection. I can't seem to get connected to my own wireless router
View 1 Replies View RelatedI have CANYON 11g AP Router which is conencted to this PC and a Windows 7 PC (my workstation). Last night the providers connection dropped so after finishing my work I didn't stand around to check if the internet will be back and closed it. This morning my girlfriend tried to unplug something and accidentally unplugged the router. Ever since that happened, this PC, running XP has no internet connection issues. Unfortunately, the Windows 7 PC cannot connect to the Internet. I tried disabling and enabling, it ahs a clear connection towards "Multiple networks", but from there to the "Internet" it does not connect. I also tried a diagnostics and a firewall deactivation but still no luck. My Netwpork meter gadgetr shows my Int. IP as 192.168.1.2 and my Ext. IP as NO CONNECTION.When I try to connect to the internet it appears that Mozilla finds the website but cannot conenct to it. At least that's what I think, since it is stuck on "Connecting" and not on "Looking up". Ipconfig does not work, it only shows the window for a brief second, then auto closes.
View 6 Replies View RelatedSo everything was fine until today when I woke up. My internet wouldn't work, it was saying that I was connected with internet access but never gave me it. I checked my router settings and it shows all the correct things.
So then, I decided to check my brother's computer which is in the same room and he couldn't connect either. I turned my computer off and somehow, my brother's computer had internet access and could access the internet.
Posting from my brother's PC now. I have attempted everything, restarted the power to everything about 5 times. Our internet has always worked and has until today.
that is the question if you have a N router and connect a G device your speed drops down to G but which are the numbers in mbs?
View 9 Replies View RelatedCan't connect my Xbox to my router.I've just brought a new router.It is a Tenda W311R Wireless N Cable DSL Broadband Router.But I can't connect it to my Xbox 360 S.I've managed to add my PC, Laptop, and PS3 to my home network without any difficulty however.I've encrypted my home network with WPA2 as recommended by Microsoft.These are the steps I took when trying to add my xbox 360 S console to my home network:
1. On the console I went to My Xbox
2. Then System Settings.
3. Network Settings
4. Scan for Networks
4. My router was listed so I selected it
5. I then entered my WPA2 wireless password
6. Then I selected Test Xbox Live Connection.
The console then said it couldn't connect to my wireless network. I was thinking that the Xbox 360 S console's built-in Wi-Fi uses the 2.4 gigahertz frequency band. Maybe my router is broadcasting using another frequency... But I have yet to check what that frequency is.
I just bought a brand new Dell Inspiron 15r.. (was using an HP mini before Dell, had same issue) It has Windows 7..The router is a Belkin G Model F5F7234-4... Co worker can connect, this router used to be in his home so he configured it then and just brought it to work and didnt have to do anything but plug and play.. then i came along and couldnt connect..Im currently using the internet on my Dell connected by my EVO with PDANET..When i came in with my Dell i automatically tried connecting with out any set up, usually works perfect anywhere i go.. but keeps showing unidentified network and showing it as a public access... iv googled and read everything from disable mcafee and try connecting with the ethernet cable... before i had a cable i tried running belkin setup assistant cd and it would say no connection to router.. i finally got ahold of an extra cable today and tried that in to set it up with the cd while wired, at first it showed on the laptop it was wired and i put in the belkin setup assistant cd and it would just keep looking for the router,(now just showed wired on router but not on computer) then tried manual set up where IE popped up with http://192.168.2.1/ in the address bar, but wouldnt connect.. tried to diagnose everything every time.. it keeps saying can not connect via net work adapter or LAN does not have valid ip address... iv reset and or disabled then enabled everything.. i have all passwords and pins to the router.. i would keep using my pdanet but trial is up and its gonna cut off on me soon like last week, it keeps messing with me.. but why pay for it or use it when i have a perfectly good network to connect to at work!
View 2 Replies View RelatedI recently built my own gaming pc, spec'd as follows:
Asus Rampage IV Formula
Win 7 Ultimate 64 bit
I73930k
GTX 680
120gb ssd
etc.
I have installed Win 7 Ultimate 64 bit with no real problems. Except the internet connection! I have Sky Broadband which has a Sky router. I can connect my laptop wirelessly so i know it works ok. The only way my 'new' desktop will connect to the Sky router is by using an Ethernet cable. It simply cannot connect to it wirelessly.
I work in a small office and use a laptop with Windows 7. We use the same router and have wired internet. His computer is connected to a "Network 4" while mine is connected to the private wireless internet system we've set up. He can't connect to any other connections on his computer while all the other connections around our office is visible on my laptop.
View 1 Replies View RelatedI have a D-LiNK router I want to connect two pcs to it through LAN when I do. one of them connects to the internet and the other not i tried to set the ip to obtained manually i gave one 192.168.1.100 and the other 192.168.1.10 and I gave the primary DNS to preferred DNS server and the secondary DNS to alternative DNS server and it didn't work too.
View 2 Replies View Relatedhow i can connect to my router in my home when im using internet outside for example in my office
View 4 Replies View RelatedHey, I've recently reinstalled my Windows 7 Home Premium and I since my PC does not detect the router.I've tried using a SKY recovery disk, but that failed and nothing happened. Do I need to download a specific driver so the PC can detect the router?
View 5 Replies View RelatedJust did a clean windows 7 x64 installation on a build a box computer with a new hard drive. Install went fine. Plugged it in to my 3 month old Linksys Wireless G Broadband Router (WRT54GL) and it doesn't recognize that there is any connection at all. Windows says "No connections are available" and troubleshooting can't identify the problem. The light on the router and on the computer comes on. I am running a wired connected XP computer and 2 Win 7 x32 wireless connected computers just fine. Ran ipconfig /all and it came up as follows:
Host Name.................... : Bottomdweller-PC
Primary DNS suffix.......... :
Node Type ....................: Hybrid
[Code]....
All wires are connected. I've tried booting in Safe mode with networking. I've even connected the computer directly to the cablevision modem. I've installed a USB Linksys wireless adapter and although it installs fine, it doesn't see the router at all. I've also tried reinstalling the router directly on this computer but it doesn't see the router at all.
I've tried setting up a new connection or network, Connecting to a network and choosing a homegroup and sharing option but since you need a network to connect to first I couldn't do it.
Got a new Asus laptop. Tried to connect to wireless router, but I always get no network access and an unidentified network. Some data points: I have a D-Link DIR-625. This could be the problem since it is from 2007, but technically it is compatible with Windows 7. All other devices (Windows XP laptops, smartphones, etc.) connect with no problem to the wireless router. The LAN on the new laptop connects fine to the router when I plug it in. Only the wireless does not work. I have read online forums for 4 hours trying to figure things out but haven't had luck. I think I've tried everything. I have attached the ipconfig /all below. Oh, and my computer does not have Bonjour installed, which apparently has caused this issue for others.
Windows IP Configuration
Host Name . . . . . . . . . . . . : VC-PC
Primary Dns Suffix . . . . . . . :
[Code].....
i had created a work group of five to six computer through a wirless and wired router provided by the isp but the problem is when ever i try to connect my windows 7 pc to win xp pc it say enter network password which i have tried what was mentioned in every forum but the result is same any had tried it and got a better idea please help is needed other wise i am able to connect to win 7 from win xp by wireless and wired also
View 2 Replies View RelatedI have a linksys router which I never secured with a password. I was able to use it with no issues until I added a password. The router works fine, I've connected my phone , Xbox, and laptop with no issues. My upstairs computer in the other hand I can not connect. It asks for my password and does not connect. It also asks for network authentication.
View 1 Replies View RelatedI recently started using a computer with Windows 7. I have a linksys modem that is wired to a Wireless router and the computer is wired to the router.
After the Windows 7 upgrade, the wireless router stopped working for both wired computers and wireless connections. If I bypass the router and run directly from the modem I get Internet connection again.
I attempted to replace the wireless router with a new one and it's the same issue.
I've disabled IPv6 and tried to manually configure DNS and still no go.
Any thoughts on what may have gone wrong after upgrading to Windows 7 or why the router would suddenly stop working?
i don,t know how do i connect to wireless router to my computer
View 2 Replies View Relatedhow cn i open 192.168.1.1 to change my password on wireless connection?cn somebody help pls..
View 3 Replies View RelatedI have both of these things and my recent internet still come up on my laptop, how can i connect or use my router to get wifi, need this for work asap.
View 4 Replies View Relatedwhat procedure do i go through to get connected to adim to log in
View 2 Replies View Related
