i have a windows 7 laptop and all of my computers at home are connected to my dell server which is running windows server 2008 r2 threw wires that go to my router, now i want to add my labtop to my server connecting the labtop wireless to my wireless router and from there adding it to my server. For some reason my labtop do-sent connect to my server
View 1 RepliesWhat are my options for connecting a laptop wirelessly to a workstation that is connected to a wired LAN and has no router?Essentially, I want to add wireless connectivity to the workstation so that the laptop can connect to the wired LAN via the workstation.
View 2 Replies View RelatedMy daughter got a Security Shield virus on her laptop and I managed to remove it using this BC thread: [URL]. The laptop uses Windows 7. The removal seemed to work fine, although one slightly odd thing (compared to the thread's advice) was that I didn't have to change the LAN settings/Proxy server when I booted up in Safe Mode - the virus was preventing internet access but didn't appear to be doing so by the Proxy server change. So I was able to access the internet perfectly well when in Safe Mode with Networking.
I downloaded everything I needed using the laptop wirelesly and scanned/removed the 2 security shield virus files using malware bytes. Then, when I rebooted as normal in order to complete the process and update the HOSTS files, I couldn't access the internet wirelessly. The router is working fine and when I connect via ethernet cable the laptop communicates fine with the internet. It just refuses to let me connect wirelessly.
I have tried:
- Checking all firewall options in McAfee (though I guess this wouldn't enable a wired connection either if it was the problem)
- Removing and reinstalling the wireless device (via device manager)
- Deleting and resetting up the wireless profile
Just not sure what to do next....
Been tackling this problem for over a year now, with a few installs of Windows 7 that ended up making me go back to XP. Well now I have a dual boot with XP SP3 and Win 7 HP x64. The problem is that I can't connect to the internet while using a wireless adapter on Win 7, the wired connection works with Win 7 though, and the wireless USB adapter (Zonet ZEW2546) works on XP. The only pair that doesn't work are the zonet and Win 7. I've tried just about solution I could find, to no avail. I have an EVGA P55v SLI mobo - which I've heard isn't great with wireless, but if it works with XP it should be possible with 7 too. Win 7 is a fresh install so the problem is not antivirus or another program. here is a copy of ipconfig /all (The Realtek wireless LAN utility is the USB adapter, and I am connected by wire.)
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Usersack>ipconfig /all
[Code].....
Well, I have a Satellite I355D-S7825. I checked under Device Manager and I only see the local ethernet connection I'm using, and it won't wirelessly connect anymore...I'm not sure what to do, or what driver to update or how.
View 8 Replies View RelatedI installed my dell v305w on my new laptop successfully and was happily using it until recently. It was suddenly offline. I tried updating the drivers to no avail. So after several attempts, I removed the printer and drivers and downloaded and installed them again. I then went to start -> all programs -> dell printers -> v305 -> dell wireless setup utility and ran the utility. The wireless network was added successfully, and the wifi light on the printer was blue. Success... However, despite the signal strength on both laptop and printer being consistently good, when I attempt to print wirelessly, the laptop lists the printer as "offline". VERY FRUSTRATING! I have been trying to sort this out for 2 days! I have rebooted both printer and laptop, and that didn't work either..I can use the printer wired, but I bought it specifically because it was wireless.
View 3 Replies View RelatedI have a wireless router linksys connected to the modern witch is on the second floor. I want to connect another router linksys on the same network that the one on the second floor is on, wirelessly without any cords on the first floor.
View 15 Replies View RelatedMy girlfriends parents have bought a new compaq laptop with windows 7. Connected up to the internet by cable & wireless no problem. Yesterday couldn't do either and found it nearly impossible to get into the routers settings to check them. Kept saying limited access. I've tried various things to no avail. Then I noticed that my iphone could connect to the router, so I ruled out a router problem. I brought the laptop home and it wouldn't connect to our router, so I'm presuming it's a settings problem. But now I'm stuck!
View 14 Replies View RelatedAfter being hit with a Trojan virus, I re-installed Windows 7 Premium 32-bit.However, I now cannot connect to my wireless network. In device manager, there is a yellow triangle and ! against network controller. I have no idea what network controller I have. Speccy can only identify a Marvell Yukon network adapter but no network controller.how I can locate the driver for the controller? I have tried every trick I could find on different forums, to no avail so far.
Hardware IDs: PCIVEN_168C&DEV_002B&SUBSYS_E025105B&REV_01 PCIVEN_168C&DEV_002B&SUBSYS_E025105B PCIVEN_168C&DEV_002B&CC_028000 PCIVEN_168C&DEV_002B&CC_0280
how do I print wirelessly from my HP laptop Vista, to my C6150 HP All In One Printer
View 1 Replies View Relatedi have my wifi running on tv, phones and laptop but How do i Play media stored on my laptop wirelessly to my toshiba smart tv what software on my laptop would i need to install
View 1 Replies View Relatedjust about every time i turn my computer on i get a message that says that i couldn't connect to windows server, than i have to reset my computer a few times sometimes until it connects.
View 5 Replies View RelatedWe have a windows 2000 server, a few XP, 1 vista and 1 windows 7. Everything works fine before but all in a sudden, only the Windows 7 cannot connect to the server. The 7 is a new PC, it works and connect to the server fine for the first 3 months, but all of a sudden, it just cannot connect and keep prompting that the user name and password is wrong. I have re-install the 7 (it is HP and we use the recovery disc) and I even get a new wireless adapter to test, the 7 can get on the internet, everything except the server. But all others windows has no problem with the server, I am guess it has to do with the 7. I am getting so frustrated that I also gonna use that HP windows 7 into a door stopper.
View 2 Replies View RelatedWhen I go on the internet I can go to any site but one. It says that windows could not connect to proxy server. I have tried everything I could think of. I added it to trusted sites, reset the proxy, tried several commands and haven't gotten anywhere. It won't pull up the particular site in IE or firefox, but it will pull it up on any other computer.
View 2 Replies View RelatedI'm experiencing a curious issue. I've installed a second Samba server on our network and I've imported all the users from the original over, along with smb conf files, etc... All PC's are access both servers without an issue except for 1 Windows 7 64-bit OS machine. Oddly enough, the virtual pc on the Win7 box connects without an issue. To add another twist, the win7 box connects to the older Samba without issue. When trying to browse to the new server I get.... "Windows cannot access \NewServer" Check the spelling of the name..... Error Code 0x80070035 The network path was not found.
View 4 Replies View RelatedI have a server set up in my office for 10 years and it is networked in within the office. Also it is set up for me to be able to connect to it by webmail and also to connect to see files and all I have on it. It has worked always, I was able to get in when out of town, till last week and on the same computer I have used, a laptop, now it does not let me in. The only change was, I have upgraded the laptop with the new Windows 7. I can still get in on my friend computer from outside the network, however he has Windows XP. I have tried other computers, some I can get in with some I cannot. I went to Staples and I cannot get in from there either. Does the new Windows have some new security installed preventing me to get in?
View 9 Replies View Relatediam trying to create one domine in vm ware.i am install one server os 2008 and windows 7 client os.in 2008 installed adds.but in client pc can't support connect to network.
View 2 Replies View RelatedI am currently installing a Win 7 box. When I first set things up I was able to get onto my Linux server in Network -> [server name], by logging in to Win 7 using the same user name and password set up on the Linux box.A short while later I am unable to connect - I get a dialog prompting me to enter a user name and password and a message "Logon failure: unknown user name or bad password". If I re-enter my user name and password the dialog comes back again.
View 1 Replies View Relatedi have following problem. At work we have HP proliant ml350 server with windows server 2008 on it, 3x windows 7 client and 25x win xp sp2 clients. Network doesn't work, clients cant see each other, can't see server and server can't see them in network and sharing center. What could be a problem? Is ipv6 protokol on windows 7 obstructing a server or something else?
View 2 Replies View RelatedToday, my house got new internet. Now, my desktop, which is plugged directly into the modem, can't connect to the DNS server. I have internet connection, since Skype and Steam both work, but any web browser only works about 15% of the time. Neither of the three wireless-connected laptops in the house are having any problems. I've tried a few things, but nothing seems to work.
Here is my ipconfig /all.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersPaul>ipconfig /all
[Code].....
OS: Windows 7 64 bit
Laptop: ASUS Notebook K60IJ Series
I work from home a lot by remoting in to my PC at work. Last week I was able to remote in just fine, but today could not using my laptop. I could remote in using my wife's laptop just fine, but could not using mine. I get the following error:Could not connect to terminal server can log into the network just fine. I have a random passkey that I enter etc. But, when I put in my workstation ID and try to connect, I get the above error.Again, I was able to log in just fine using my wife's laptop today, but not mine I have not made any changes recently (that I know of)
Update:this seems to be an Internet Explorer issue. I downloaded and tried to remote in using Firefox and it worked just fine. Any ideas why IE is now giving me issues? Is there a setting that changed? I was gonna try to uninstall and reinstall IE, but it does not come up in my list of programs to uninstall...
No one can connect to Gmod server
View 3 Replies View Related9 times out of 10 i cannot get pages to load they are either "Timed out" or "Can not connect to server" & the latest one is "firefox has ??????? in a way that it will never be able to connect" Can't remember the ?????? part, messages along these lines, My signal strength is full & when i run trouble shooter it comes back with "No problem was found"
View 2 Replies View RelatedThis problem suddenly appeared and after I had successfully managed to connect to the servers. I recently purchased this Dell XPS 8300 with Windows 7 64-bit Home Premium and am trying to connect to a Win2000 and a Win2003 server. I can connect to other Windows 7 machines on this network without incident.I can see the servers in my network, but when I attempt to login, after the first login attempt I get the box showing MININT-9MI7DNAdmini... MININT-9MI7DN was the name of this computer before I renamed it.
I then try to login using the "Use Different Account" option and I put in (server name)(userid) and password, but then I get the second image attached to this post. I've also tried (server name)(userid) but with no greater success.Also, on the computer that is having problems, the system tray icon for the network shows the "X" but when I put the mouse over it, it shows Internet Access.And I do have Internet access on this machine since I am posting this message from the problem machine. I don't know if this system tray icon issue is related but, thought I would mention it.I have ensured that all computers are in the same workgroup.I have turned off IPv6 on the machine having issues.I have made sure that NetBIOS help for IPv4 is enabled.I have tested logging into these accounts on these servers from
I am currently running a Server 2003 R2 domain with about 100 computers running WinXP Pro on it. Some of these computers are older tablet style computers that are used out in our shop floor area. We are looking to replace these with some newer Windows 7 mini-PC's. All of them connect to the network via wireless access points, as these stations need to be mobile so they can be taken to all areas of the shop.During the test setup of the device I can get it to join to the domain and it can connect to our main file server, which is also the primary DC, and download files with no problem. It can also connect to the mail server with no problems that I have noticed so far.
The issue arises, when it tries to connect to get Group Policy updates. when running "gpupdate /force" I get an error for both the user and computer parts of the update that says: "The Processing of Group Policy failed. Windows could not locate the directory object group policy..." When looking at the event logs, there are tons of GP errors, all of them are error 1101.
Not sure if this is the correct forum, but I tried a search and didn't find a related thread. I have set up the FTP Server on two Windows 7 (Pro 64-bit) boxes via IIS. I have found that if either PC goes to the screensaver, I cannot FTP to that PC. I get "connection timed out." The second I move my mouse or hit the keyboard to get rid of the screensaver, I can immediately connect via FTP again. Neither box has the screensaver password protected. Is there some setting I need to change so that FTP can connect whether the box is logged on, logged off, or has the screensaver up? This PC will eventually serve as the main image to go out to about 300 remote sites with scripts that run overnight and will need access via FTP.
View 5 Replies View RelatedI got following error when I tried to connect by Nortel VPN 10.01.052
View 1 Replies View RelatedI tried to log onto Firefox and it said something about not able to connect to the proxy server. I then tried to connect to IE, Opera, and safari and they didn't work. I configured my FF settings to let the network choose the server. But for some programs, like MW2 I cannot access Multiplayer, but I can access teamspeak.
View 9 Replies View RelatedI have recently purchased a new laptop with Windows 7 Home Premium x64. I installed Office 2007, which has updated to SP3.Using XP I used to be able to successfully use Outlook 2007 for my office email, which uses a microsoft exchange server. I have not been able to get this to connect using Windows 7 despite using exactly the same settings. I have also tried a number of other combinations as advised from other sites but I can't get anything to work?This microsoft fix was also of no help... Error messages when you try to connect Outlook 2007 to Exchange Server: "The action cannot be completed" or "Your Microsoft Exchange Server is unavailable" or "Cannot start Microsoft Office Outlook".I have tried various username combinations: username or domainusername.I have tried various password security options.This is the error message I get: Outlook cannot logon. Verify you are connected to the network and are using the proper server and mailbox name. The Connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action.
I use the following setting:
Use Cached Exchange Mode - unchecked
Encrypt data between MicroSoft Office Outlook and MicroSoft Exchange
Server - checked
Connect to my Exchange mailbox using HTTP - checked
Proxy authentication settings: Basic Authentication
I have a web server and a mail server running under Win 7 on my LAN, most smoothly, but I want to be alerted when the servers appear down to the WAN. So I wrote a PHP script and sent it to a remote web server, and invoke the script from my web browser on the LAN. The script checks my domain's MX records for hosts, then converts the mail server's host name to IP, then connects to IP's IMAPS, POP3S and SMTPS ports (933, 995, 465) and receives the welcome messages. It then connects to my web server on HTTPS and HTTP ports (443 and 80), and sends a simple HEAD request and receives the response.
View 1 Replies View Relatedhow to connect win server 2003 to win 7 and vista
View 1 Replies View Related