Computers At Home Connect To Same Router But With Different Names?
Apr 15, 2011
All three of my computers at home (all on windows 7 ultimate 64bit) are connecting to the same router with same SSID, but they end up having duplicate names such as NetworkName 1, NetworkName 2, NetworkName 3. This is preventing me from having them share via homegroup. I made sure the computer names are all different and all connect to same workgroup name. Is this a router setting problem? i'm using a cisco-linksys wrt-160n flashed with DD-WRT. i was checking the settings and ran across a new term, vlan. could it be they are all connected to separate virtual networks? i tried to disable vlan, however, that just disconnected all the computers to the internet.
So everything was fine until today when I woke up. My internet wouldn't work, it was saying that I was connected with internet access but never gave me it. I checked my router settings and it shows all the correct things.
So then, I decided to check my brother's computer which is in the same room and he couldn't connect either. I turned my computer off and somehow, my brother's computer had internet access and could access the internet.
Posting from my brother's PC now. I have attempted everything, restarted the power to everything about 5 times. Our internet has always worked and has until today.
Last week I had a Win XP desktop computer. I use a Netgear WGR614 V6 router. I have fiber to the house and use a Cat5e Ethernet cable to connect the router to the wall jack and Cat5e from the router to the XP computer. I also used Wi-Fi to connect my Windows 7 x64 new laptop and an older XP laptop to the Internet. Everyone was happy and all worked well! I set-up a new Dell Windows 7 x64 desktop computer (it currently connects to the Internet just fine).
During the period I was setting up the new Windows 7 desktop I had both the XP desktop unit AND the new Windows 7 desktop connected to the router via Ethernet cables (at that time both laptops could connect to the Internet). After I had transferred the XP files to the Win 7 computer I just shut down the XP computer and removed the Ethernet cable linking the XP computer and the router - the new Windows 7 computer still connected to the Internet fine (as it still does today).
I made 2 changes to the router: 1) I had the XP desktop connected to Port 3 on the back of the router and had the Windows 7 x64 desktop connected to Port 2 on the router. 2) I used Cat5e cable on the XP desktop and used a Cat 6 cable to connect the new Windows 7 desktop unit to the router.
Both laptops see my router name but neither laptop can connect - even ran the troubleshooting routine. Could simply using Cat6 cable be causing a problem (Windows 7 desktop connects fine via the cable, laptops can not connect via Wi-Fi)? Surely just changing the port I connect the desktop cable to the router with wouldn't cause any problem would it? Do I need to do some sort of set-up or configuration to the new desktop unit to make the router Wi-Fi work for the laptops?
My Dell Studio 15 laptop cannot connect to my home wireless router, by can connect to neighbor's or my friends's or hotels's wireless network. My IPad and another two Dell Inspiron 17 laptops can connect my home wireless router without problems.
I know this is an old post, but I am encountering the same problem and I can't connect to the internet.A few days ago, my network was connecting to it's normal name but later I was not able to connect because it is names "BLAH 2" I disabled it and my original one popped up again and it's fine.Now, I can't even disable and enable back to my original one. I've tried deleting it on that screen shot that was given and connecting again but still no luck.
I have 2 wireless routers/switches in my house. I have a router downstairs and one upstairs My setup is currently like this Downstairs: Computer Printer Modem Upstairs computer HTPC (media center pc) I use the printer on the downstairs computer to print everything, and this used to work fine until I installed a new router upstairs. My old setup was that upstairs I had a wireless router, and a separate switch, and the router was feed internet through the switch. Now that I installed a router/switch combo, I cant see any computers except for whats directly connected to the upstairs router.
I have two PC's in the same room connected to the router and receiving good to excellent signal strength. One PC has no problem getting online while the other one can rarely get online. Or, if it does, it doesn't stay online. The problem computer is a Dell desktop using a wireless USB adapter. In the past, in different houses, it has never had a problem getting online. Windows 7 troubleshooting has not been successful.
This is for my parents house. They have high-speed net that can only be registered to one computer, so running it to a router and then computers is not an option. We used to have it setup with net into "computer 1" then out to the wireless router. The new computer has only one ethernet port, so this can no longer be accomplished without buying another card, which I am very inclined to do. They are getting another computer that will also have Windows 7 and would like to get wireless working again, so...
1) I've tried an ad-hoc connection. I understand the concept and had it working for awhile but found it to be "finiky." I would always have to restart the connection everytime I wanted to use it. I couldn't get it to "stick." Did I maybe do something wrong or is there no way to keep the net connection open? I "saved" the network and set it to start automatically, but it would always close the internet sharing.
2) I haven't messed with home group...will this feature accomplish internet sharing easily??...without messing with any ad-hoc crap? I need everything as simple as possible, so if they have any problems I can fix it over the phone or they can figure everything out for themselves.
Like I said, worst comes to worst, I'll get them another ethernet and run it the old way...was just hoping I could simplify things and save some money.
I have two computers running W7p that I want to access when I'm away from my office. I am able to use remote desktop from inside my home network on either computer. I am able to access one of the computers from outside with my router set to forward global port 3389 to host port 3389. I am guessing that what I need to do is set up two port forwards in my router; the global port will be different but the host port will still be 3389 in each case. Does that sound right? One thing I know is that going into the registry and changing the host port to something other than 3389 does nothing. In fact, if I do that I can no longer use remote desktop inside my home network. I've looked all over the web today and there are not any clear instructions on how to do this (that I could find). I read the Windows 7 forum tutorial.
I have for example a few machines up and running on a LAN (might be VM's but that shouldn't be an issue).
Say I have five with addresses 192.168.2.2 ==> 192.168.2.6
I might want to RDP to any of these from behind a router.
Using something like No-IP (No-IP - Dynamic DNS, Static DNS for Your Dynamic IP) I can get a an "Internet acessible" domain so I don't need to know the actual IP address that the Internet sees my router.
As I'm behind a router having Multiple domains won't help either as to the external Internet my router is seen as a single IP address.
However the router will only port forward to a single IP address on my LAN.
So if I need to RDP to any other machine on my LAN other than the default one presumably I could only do this by using a different default port for RDP for each of the machines on the LAN. OK not pretty but "Do-able".
Now we get to the real hassle -- If I did this then I'd need a different version of RDP on the CLIENT computer -- not possible if I'm using a work laptop .
I am trying to figure out how to network my laptop with my desktop. I have a Qwest DSL Wifi router. My desktop computer is hooked up to a Vonage device/router and then the Vonage device is connected to the DSL router. My laptop is connected to the Qwest router by Wifi. Also, the deskop and Vonage device are setup with a static IP. Is there any way to network between my desktop and laptop so I can do file sharing?
regarding the contacts being synchronized with Outlook. All my contacts have their first names under 'First Name', but their last names under 'Middle Name'. I want to copy the middle names of everyone to the 'Last Name' box. There are more than 700 contacts and I can't be doing this individually for each contact.
i cant seem to get second pc connected online over wired network with no router, says low connectivity & unidentified network, i connected just fine when i had window xp pro 32bit on frist pc, but when i install windows 7 on first pc, i could not connected online at all with second pc.
Well yesterday after playing online games and surfing the web, so then i decided to go to bed and my laptop took longer than before so i then clicked cancel and tried refreshing i then shut down my laptop and it seems fine. But now today i turned on my laptop and it seems fine until i login when i log in it shows a black screen with only my cursor in the middle but i can still move my mouse around (this never happened before) then it goes to the desktop screen and my icons and gadgets were starting really slow but they came up in the end but then i look at my wifi conection it says No internet accsess but i looked over to my internet modem the internet was on. So then i opened the other laptop and i can use the internet, so i tried restarting my laptop and it did the black screen thing again and still no internet accsess. So I then switch to Safe mode networking and i can connect to the internet just fine i then went and looked at the Device manager and clicked on System devices and theres a yellow triangle with an exclamation mark on Consumer IR Devices.
My netbook shows signals from others in the area but shows a red X next to my router connection. I can't seem to get connected to my own wireless router
I have 2 Windows 7 computers one is a Hp Laptop and another is a Compaq Desktop I have been dealing with this problem for quite awhile and each time i go to try and correct the trouble i get unbelievably frustrated as in the end i never seem to make any progress. I have attempted to create a home group from both machines and when i do create a homegroup the other IS able to see the other but when i attempt to join from either one to the one that has created it always yields an error stating that "window cannot setup homegroup on this computer" The desktop is hardwired to my Dlink router and the laptop is connected wirelessly.
My computer was working fine yesterday, it showed about 6 Networks and I was able to connect to my own network, D-Link fine. Now after playing a game via game booster I tried to acces Google Chrome and it says "this webpage is not available" I cant acces Skype or steam or anything that requires internet. I thought I had simply disconnected my self but when I went to check, it shows no networks. I thought this was my connection but then tried other devices "I-Mac, I-Pad, Windows XP Desktop and a DSI" and they all seem to find many networks and connect to D-Link fine.
* I am using a Blackberry to USB tether to my desktop (internet works on pc)
*Ethernet to WAN (from PC that has internet to wifi router)
*I get DNS is not responding now from any other computer connected to the network either wired or wifi
* Set up my network as following: Tether has internet sharing turned on and connected to Local Area Connection
* Local Area Connection has IP4 configured as:
IP address: 192.168.0.1 Subnet: 255.255.255.0 Default: blank
Preferred DNS Server: 192.168.1.1 (my ethernet connection so the internet connection is sent to wifi router)I have tried everything...I mean days of effort and searching. IP6 is disabled. Microsoft Virtual is disabled.This SAME exact setup was working perfectly a week ago with an older Linksys Wifi router. Then I bought a new Linksys E2000 and because I wanted something new (Bad move). That setup no longer worked on the new router....now it no longer works on the old router.
I've been trying to create a homegroup which my laptop (wireless) and my computer (wired) will be part of. They are both connected to the same router. My wireless is called "BuckleyWireless" and my wired computer is connected to something called "VirginMedia478xxx". I'm not sure whether these have to be the same name for it to work so I thought I'd post this anyway.I've checked the subnet mask for both computers and they are the same.I've tried turning off the firewalls on both computers.I've gone into advanced settings so that both computers are "visible" within the network.My laptop is now visible on my wired computer but it can't actually be accessed for some reason.
I am on a mission to find out how to properly connect 2 computers to the same Internet "pipeline" (cable Internet - provider: Videotron - Canada) in an independent fashion so that when I shut down one computer, I do not lose the phone lines and my wife's computer still gets an Internet connection to the outside world.We are using Windows 7, the computers are brand new and the Internet connection is strong, but the moment I shut down my computer, within 5 minutes my wife computer will lose her Internet line and the phones will die.I am at a loss as to how to solve this since I have tried all combinations, permutations, you name it and nothing seems to work.Could it be my Internet provider's fault or am I doing something wrong when I connect everything to the router.
I have a desktop computer connected to a wireless modem through an ethernet cable. My laptop is connected to the modem using wifi. Is there any way to connect the two computersThis my network map:
how I have a computer that has Internet through wairles intrnet card that is located in the housing care now how to send it to laptop via lan card which is integrated on the computer and slobdna the laptop has a LAN card operating system is Windows XP spc 3rd
how to connect 2 compute .1 is laptop and the other is desktop using bsnl broad band modem type 1 which have 4 port plus 1 usb port . so that both the computer has networking and internet connection.
I running home premium windows 7 on my pc desktop. Can i Load it as well on my macbook parallel as well. or need another license, and if so. How much does it cost.
I am wondering how to connect my laptops together using a domain I think because the OS's are Windows Vista in my school which connect to a domain and share everything, I was wondering how to do this with my 3 laptops, please make sure it is free and nothing to-do with Windows Server etc, 2 Laptops and Win 7 Home Premium other one is Vista Basic and all NTFS and x86.
My home network has 4 computers(including mine) running windows 7, and all of them are connected to the same router/access point for internet connection. When I created a homegroup, and went to add the other computers, they created another homegroup and the other 3 computers are now in the same homegroup. However on my side, it detects no computers. I clicked "leave homegroup", and it detected no homegroup on the network. The other 3 computers are on the same homegroup and are able to share files and printers. I cannot join the homegroup when i click homegroup in windows explorer it only says there is no homegroup on the network and asks me to create a homegroup.
Okay so i have established my DvD drive will not read this but another computer in my house will. I need help getting her {Vista home basic} to share it with my {Windows seven ultimate RC}. I have turned firewalls off and everything.
