I have two computers running W7p that I want to access when I'm away from my office. I am able to use remote desktop from inside my home network on either computer. I am able to access one of the computers from outside with my router set to forward global port 3389 to host port 3389. I am guessing that what I need to do is set up two port forwards in my router; the global port will be different but the host port will still be 3389 in each case. Does that sound right? One thing I know is that going into the registry and changing the host port to something other than 3389 does nothing. In fact, if I do that I can no longer use remote desktop inside my home network. I've looked all over the web today and there are not any clear instructions on how to do this (that I could find). I read the Windows 7 forum tutorial.
I've seen this somewhere, but I can't for the life of me find it again. There is a way of setting only certain remotes to work with certain PCs so they don't interfere with others. I have my HTPC and laptop in the same room, both with IR receivers - whenever I use the remote for my PC, the laptop ends up with all the signals too, and I come back to find it's playing a video or something.
Does anyone here know where that tutorial/registry setting is to change remote control channels?
I have for example a few machines up and running on a LAN (might be VM's but that shouldn't be an issue).
Say I have five with addresses 192.168.2.2 ==> 192.168.2.6
I might want to RDP to any of these from behind a router.
Using something like No-IP (No-IP - Dynamic DNS, Static DNS for Your Dynamic IP) I can get a an "Internet acessible" domain so I don't need to know the actual IP address that the Internet sees my router.
As I'm behind a router having Multiple domains won't help either as to the external Internet my router is seen as a single IP address.
However the router will only port forward to a single IP address on my LAN.
So if I need to RDP to any other machine on my LAN other than the default one presumably I could only do this by using a different default port for RDP for each of the machines on the LAN. OK not pretty but "Do-able".
Now we get to the real hassle -- If I did this then I'd need a different version of RDP on the CLIENT computer -- not possible if I'm using a work laptop .
I would like to setup a remote desktop connection between 2 computers in my LAN at home(both win7). Both comps are on the network and remote desktop is enabled for both of them. It doesn't want to connect (even with my firewalls turned off) and keeps saying: Remote Desktop can't connect to the remote computer for of of these reasons: ... What am I doing wrong? Note that I did allow Remote Desktop on both computers' firewalls?
I have a desktop and laptop with windows 7, I want to use RDC from either side using the internet connection. Both machines are connected with same router for internet connection.
For internet, desktop is connected through LAN cable and laptop through WiFi. Can I use RDC between them without wired connection and using router/internet?
Last week I had a Win XP desktop computer. I use a Netgear WGR614 V6 router. I have fiber to the house and use a Cat5e Ethernet cable to connect the router to the wall jack and Cat5e from the router to the XP computer. I also used Wi-Fi to connect my Windows 7 x64 new laptop and an older XP laptop to the Internet. Everyone was happy and all worked well! I set-up a new Dell Windows 7 x64 desktop computer (it currently connects to the Internet just fine).
During the period I was setting up the new Windows 7 desktop I had both the XP desktop unit AND the new Windows 7 desktop connected to the router via Ethernet cables (at that time both laptops could connect to the Internet). After I had transferred the XP files to the Win 7 computer I just shut down the XP computer and removed the Ethernet cable linking the XP computer and the router - the new Windows 7 computer still connected to the Internet fine (as it still does today).
I made 2 changes to the router: 1) I had the XP desktop connected to Port 3 on the back of the router and had the Windows 7 x64 desktop connected to Port 2 on the router. 2) I used Cat5e cable on the XP desktop and used a Cat 6 cable to connect the new Windows 7 desktop unit to the router.
Both laptops see my router name but neither laptop can connect - even ran the troubleshooting routine. Could simply using Cat6 cable be causing a problem (Windows 7 desktop connects fine via the cable, laptops can not connect via Wi-Fi)? Surely just changing the port I connect the desktop cable to the router with wouldn't cause any problem would it? Do I need to do some sort of set-up or configuration to the new desktop unit to make the router Wi-Fi work for the laptops?
I know there have been a number of posts on this subject but I have been unable to find a solution. I have 2 Windows 7 machines, both running SP1.
My HP Pavilion is running 64-bit and my Dell Latiude E6400 is running 32-bit. I can successfully RDP from my Dell and even my Apple iPad (via an RDP client) into my HP Pavilion. However, the problem is that when I try to RDP from my Pavilion into my Dell I get connected but all I see is a BLACK from the Dell machine. The only thing i can see is the Status bar at teh top telling me that i am connected. A few moments later I get a popup message telling me that the machines have failed to communicate.
I have confirmed that RDP settings are identical on the Pavilion and Dell. I have even downgraded the Dell NVIDIA graphics driver to an older version based on the recommended version on the Dell support web site.
I am using Windows 7 Pro 64bit, trying to use Windows remote desktop to connect to another PC in the LAN and install software. Right click on the .exe and choose run as admin. As soon as I do that I get a black screen with 2 white bars in the upper left hand corner(looks like a pause button). The user who's pc I am connected to sees the log inbox for the admin creds, how ever I can not get to it. How can I make that screen stop popping up?
We have several remote systems that can all connect fine. I am having an issue with one box. It is a windows 7 home premium machine with netgear wireless nic. When I open mstsc to connect to a remote machine I put in the ip address and click on connect.I receive an immediate failure with the text "This computer can't connect to the remote computer. Try connecting again...blah blah"I have a server 2008 r2 with Network level authentication enabled. I have 8 other systems that are hardwired, at different geographic locations and all connect fine. I have not made any changes on the server side since this problem seems to be local to this client only. On the client I have made the following changes/observations. I have disabled the firewall, cleared the remote desktop cache, remove the MRU entries from the registry, verified that port 3389 is open via telnet. I have been bashing my head for days trying to figure out why this one box is not working. The problem occurs for every user on the box including the admin.I don't receive the box that prompts for warning if there is a server authentication issue but I think that is because I selected ignore at some point and said yes to continue. I'm not sure where that cache resides to delete that selection.
In XP, I was able to get memory information from remote computers by right-clicking Computer, Manage Computer, Action, Connect to Another Computer, type in the computer name, then right click on the computer and and click on properties to get the memory information. Can you get information on memory from remote systems in Windows 7? I sometimes need to do this to determine if I need to order more RAM for systems that are being upgraded in an enterprise environment.
So everything was fine until today when I woke up. My internet wouldn't work, it was saying that I was connected with internet access but never gave me it. I checked my router settings and it shows all the correct things.
So then, I decided to check my brother's computer which is in the same room and he couldn't connect either. I turned my computer off and somehow, my brother's computer had internet access and could access the internet.
Posting from my brother's PC now. I have attempted everything, restarted the power to everything about 5 times. Our internet has always worked and has until today.
I have 2 wireless routers/switches in my house. I have a router downstairs and one upstairs My setup is currently like this Downstairs: Computer Printer Modem Upstairs computer HTPC (media center pc) I use the printer on the downstairs computer to print everything, and this used to work fine until I installed a new router upstairs. My old setup was that upstairs I had a wireless router, and a separate switch, and the router was feed internet through the switch. Now that I installed a router/switch combo, I cant see any computers except for whats directly connected to the upstairs router.
I have a working local Laserprinter under 64bit Win7. Through LAN another Win7 computer is connected. The remote computer can access local shared folders successfully. But it cannot access the local laser printer (connected through USB). How can I share the local printer to other computers in LAN? Do I have to define local printers explicitely as shared/accessible? Or are they automatically accessible (provided that the local user account and passwort is known at the remote computer? Do I have to install the printer driver in general at the remote computer as well or is the printer driver on the local computer enough?
In my environment we have about 100 computers that have the IE 9 windows update hidden (along with a few other updates). We do not have a SUS server to manage the updates on all of our remote computers. What would be the easiest way to restore these hidden updates on our employees' computers? Is there a registry entry for all the updates? Could I just create a reg file that delete's or modifies the 'hidden' attribute and have users apply the reg file to their computer?
I have two PC's in the same room connected to the router and receiving good to excellent signal strength. One PC has no problem getting online while the other one can rarely get online. Or, if it does, it doesn't stay online. The problem computer is a Dell desktop using a wireless USB adapter. In the past, in different houses, it has never had a problem getting online. Windows 7 troubleshooting has not been successful.
This is for my parents house. They have high-speed net that can only be registered to one computer, so running it to a router and then computers is not an option. We used to have it setup with net into "computer 1" then out to the wireless router. The new computer has only one ethernet port, so this can no longer be accomplished without buying another card, which I am very inclined to do. They are getting another computer that will also have Windows 7 and would like to get wireless working again, so...
1) I've tried an ad-hoc connection. I understand the concept and had it working for awhile but found it to be "finiky." I would always have to restart the connection everytime I wanted to use it. I couldn't get it to "stick." Did I maybe do something wrong or is there no way to keep the net connection open? I "saved" the network and set it to start automatically, but it would always close the internet sharing.
2) I haven't messed with home group...will this feature accomplish internet sharing easily??...without messing with any ad-hoc crap? I need everything as simple as possible, so if they have any problems I can fix it over the phone or they can figure everything out for themselves.
Like I said, worst comes to worst, I'll get them another ethernet and run it the old way...was just hoping I could simplify things and save some money.
New to Windows 7 and have a question. It seems my test machines keep going into some kind of sleep/hibernate state that prevents me from VNC'ing to them. All I want is for the monitors to go to sleep after 15 minutes, but the machines to stay on. We do a lot of work during off hours, but the few test machines all seem to go night-night on me when I try to access them during those times.
Does anyone know which group policy settings I should use in order to help with my late night VNC'ing?
I am using a belkin flip to switch from a new computer to old computer and vice versa. Many a times, when I press the remote button to flip THE MOUSE FREEZEZ. i AM FORCED TO RESTART and my data gets lost. Recently I had to reinstall Dragon Naturally Speaking 11 professional due to having lost all the data in the user profile. Both the computers are Windows 7 ultimate 32 bit.
my windows 7 RC is about to expire, I do have a copy of XP Pro that I got from a buddy of mine...I am not sure if it will work or not using an upgrade version of Windows 7, I want to use the 64 bit version of Win7, and I want to be able to put it on more than just one pc at the same time.
I would like to put win7 on my 2 pc's and my friend's parent's pc. Is there a version of Win7 that I am able to use on multiple pcs at the same time or do I need to buy separate Win7s for each individual pc?
I don't anticipate upgrading to a new pc for myself any time soon, but there is a halfway decent chance that I might sell my current system and be able to get a new one that way. So...an OEM version kinda scares me, but at the same time, if it would definitely be the best value, I would not be totally against it.
Another concern for me would be home, pro, or ultimate...I think ultimate would be kind of a rip-off for what I would need...the only feature looking somewhat interesting it has that pro doesn't would be the encryption thing, but I mean really, I can probably get by without that. I'm leaning towards pro mostly because I'm scared there will be a program I'll want to use that I would need to set up the native xp mode for...but again, do I really need to worry about that too much? Home would be the cheapest and in my mind have the most value, but I'd like to hear from you guys if you think I would want the features from pro or ultimate and if that would represent the best value.
So, it boils down to...
1) Stick with XP pro or go Win7? (I believe either will work fine for my needs...online poker mostly, web surfing, game playing [WoW mostly], and DL'ing/listening to music...but Win7 is so much zippier and cooler looking!!!)
2)Home, Pro, or Ultimate?
3)OEM or Retail?
4)Upgrade or Full?
5)Most important!!! Best way to get on multiple pcs?
All three of my computers at home (all on windows 7 ultimate 64bit) are connecting to the same router with same SSID, but they end up having duplicate names such as NetworkName 1, NetworkName 2, NetworkName 3. This is preventing me from having them share via homegroup. I made sure the computer names are all different and all connect to same workgroup name. Is this a router setting problem? i'm using a cisco-linksys wrt-160n flashed with DD-WRT. i was checking the settings and ran across a new term, vlan. could it be they are all connected to separate virtual networks? i tried to disable vlan, however, that just disconnected all the computers to the internet.
I bought Windows 7 Home Premium 64bit for my Windows Vista comp. Now that I am thinking of building my own computer will that cd work on a new hard drive? I know I will probably have to call Microsoft about a new product key but aside from that should I be fine?
I was wondering if anyone knew whether it is possible to login to multiple computers at once. More specifically I would like to use the fingerprint reader on my laptop to login to it and my two desktops simultaneously. I don't even know if it is possible, or if this is the right section in the forums but
I am trying to figure out how to network my laptop with my desktop. I have a Qwest DSL Wifi router. My desktop computer is hooked up to a Vonage device/router and then the Vonage device is connected to the DSL router. My laptop is connected to the Qwest router by Wifi. Also, the deskop and Vonage device are setup with a static IP. Is there any way to network between my desktop and laptop so I can do file sharing?
having a really strange issue that is affecting multiple computers all with windows 7 64 bit.
Home computer: Only seems to happen when installing or deleting .exe files... usually when I try and delete them. It is fine doing everything else.. gaming/etc.
Specs: I5 750 CPU 8 GB DDR3 RAM Nvidia 560 TI
Work computers (at least 6 different ones, all with different users): If it were only these computers having the issue, I would say lack of RAM... since we run a lot of apps, but since it is happening on my home computer....
At work I caught the RAM dropping down to 0 free, where it will normally have around 1 gig - 500 mb free. I haven't been able to catch the ram usage at home when the issue happens... since you can't even CTRL ALT DELETE, I forget the exact message, but it pretty much tells you to just restart your computer manually. Also the internet connection will drop, and firefox will say a script stopped responding.
This seems to have started happening in the last month or two, which leads me to think there was an update that affects how windows 7 is allocating RAM, where it is trying to use too much for the system and draining it.
Since this seems to be affecting so many computers I really expected to see a lot of people having the issue online, but I haven't been able to find anything.
I have a desktop running windows 7 premium and will later purchase a netbook that will come with windows 7 starter. Started is dumb, and i want nothing to do with it. So can I use the same key with the installation on the desktop on the netbook without it causing issues? In other words, I want to install it on both machines. Is there a way to do this without getting another copy or using a keygen?
I want to be able to RDP to maybe 3 or 4 different machines on a Remote LAN (OK I'm not THAT well off to be able to afford a large number of machines -- these will be Virtual machines).
On a LAN with Bridged networking these machines behave just like REAL physical machines with their own IP addresses.
Now in my router I can only see a way of Port forwarding to a specific IP address on the Lan
Is there any way to use KMS with 20 Serial Keys to Activate 20 computers with Windows 7. I am confused on if you need a Volume License only. and if you do is there any way to be able to have the Server Automatically Activate each computer after it is imaged. We plan on imaging our computers like once a month, but we dont want to manually set up the Serial Keys each time.
I have 2 Windows 7 Computers and neither one will recognize a Lexar 16gb usb flash drive, my son has a Windows 8 Computer and it won't recognize it either. I see the drive in disk mgmt, and, sometimes, Windows explorer, but when I click on it, in Windows Explorer, I get the message, "Please insert a disk into Removable Disk(I". In Disk Mgmt, the device says "No Media", when I right click to go to Properties, the device status shows "This device is working properly" and, finally, when I try to update the driver, it sas the driver is up to date. I think the drive is dead (it was bought for my son for Christmas), but want someone else's opinion
We have a small business that consists of 5 owners. One owner does most of the work and has a Desktop set up in a home office. They do most of the document related work. This person needs physical control of the computer for most of the day. The other four either live in different locations. They need all the information that the main computer has throughout the day. Documents that change, New documents, and the ability to change anything in the documents and save them. The way its setup now is a remote login. This is extremely inconvenient since the main computer is basically hijacked when someone remote log ins. Each computer is obviously on a different network, so local networking wont work.
Is there a way that the main computer can be on, being worked on by the main person, but still be accessed by the other people at the same, or different, times to get the updates and new documents? Can we do this with what we have, or is there another way to do it?
We have thought of various things, like severs, remote log in programs, etc. But nothing really works the way we need. The closest one we found was an auto sync program. But it requires everyone to have all the files on their computer. This is slightly inconvenient because theres thousands of documents and things that everyone would have to load when one person may need 1-200, and the other needs 200-400.
