Setup A Remote Desktop Connection Between 2 Computers In My LAN
Jun 27, 2011
I would like to setup a remote desktop connection between 2 computers in my LAN at home(both win7). Both comps are on the network and remote desktop is enabled for both of them. It doesn't want to connect (even with my firewalls turned off) and keeps saying: Remote Desktop can't connect to the remote computer for of of these reasons: ... What am I doing wrong? Note that I did allow Remote Desktop on both computers' firewalls?
View 7 Replies
ADVERTISEMENT
Apr 25, 2011
I have been trying for a very long time to set up a Remote Desktop Connection to my work server, and am unable to set it up and connect. The network administrator gave me the IP address for the server and I have double checked that it is correct.He told me not to add anything else to the number when I set it up, but Windows Remote Desktop Connection setup wizard says it must have "https://" before the IP number so I put that in.I always get this error: Quote: An error occurred. Contact your workplace administrator for assistance. I thought it might be a Windows Firewall issue, so I went to check if it was allowed. Remote Desktop Connection Windows 7 how to add it because when I clicked to add another program, it was not listed as an option.I read this tutorial Remote Desktop Connection (RDC) - Network and the first photo under "Option Two" in that post shows Advanced System Settings with a section on Remote Desktop.On my computer it only shows the "Remote Assistance" section and does not show "Remote Desktop" at all, and I'm not sure why.My ISP is AT&T. I have DSL with a wireless router. Is it possible that AT&T is blocking the port I need to use? I connect to the server at my office and know my credentials are good, but I don't even get to the point of being able to enter them when I try to set up the Remote Desktop Connection at home.
View 9 Replies
View Related
Nov 30, 2011
I have two computers running W7p that I want to access when I'm away from my office. I am able to use remote desktop from inside my home network on either computer. I am able to access one of the computers from outside with my router set to forward global port 3389 to host port 3389. I am guessing that what I need to do is set up two port forwards in my router; the global port will be different but the host port will still be 3389 in each case. Does that sound right? One thing I know is that going into the registry and changing the host port to something other than 3389 does nothing. In fact, if I do that I can no longer use remote desktop inside my home network. I've looked all over the web today and there are not any clear instructions on how to do this (that I could find). I read the Windows 7 forum tutorial.
View 6 Replies
View Related
Jun 1, 2011
I am looking to set up a remote desktop connection to my home computer on the home network, how do i go about doing so?
View 6 Replies
View Related
Jan 5, 2012
I am running a lite version of windows 7 32bit in which the dev took off remote desktop. I have looked everywhere but cant find a guide to reinstalling it.
View 5 Replies
View Related
Jun 25, 2011
I normally use remote desktop connection over my home network by simply typing the IP address assigned by the router to the computer I am trying to connect to.Now I am in a hotel in another city. I tried using the ip provided through ipconfig and whatsmyip.com, but I am unable to connect through remote desktop connection.
View 6 Replies
View Related
Nov 16, 2011
I'm really having a hard time configuring Remote Desktop Connection.I'm trying to set up a session between my laptop at work(Windows 7 Home Premium) and my PC at home(Windows 7 Ultimate). Now the settings are fine ('Allow Remote Assistance connections to this computer' and 'Allow connections from computers running [CODE]
View 4 Replies
View Related
Jun 2, 2011
i would like to connect using RDC from my netbook (using windows 7 starter) to my desktop (using windows 7 professional) on the road.
i have followed all the steps here: Allow Remote Desktop connections from outside your home network when i try to connect i get the dreaded "remote desktop can't connect to the remote computer" error message.
View 9 Replies
View Related
Sep 8, 2011
I have Dell Latitude E6420 which Window 7,IE9. We use F5 Network & Symantec Antivirus in Office.Yesterday I tried to do remote desktop connection of my Off PC. The URL[xxx/itt] i used errors saying " Your device doesnt not comply the client security policies".tell me which version of IE,antivirus with F5 support Window 7 to do remote connection?
View 4 Replies
View Related
Jun 19, 2009
i am a german with a workstation and a notebook with spanish keyboard.
after each remote session (notebook desktop on workstation) numlock is enabled on the notebook.
my notebook has no number block, each time i have to press an unpleasant
FN keystroke.
View 1 Replies
View Related
Oct 31, 2011
I have two computers one laptop one desktop. Just connected to the laptop via RDC. The laptop logs off on my laptop, I can view the RDC on my desktop.
Is it possible to stop the laptop from logging off?
View 8 Replies
View Related
Sep 9, 2009
This morning I was working in eplorer to move some files, and Windows 7 asked me if I wanted to turn on filtering mode, and I confirmed.
Now when I use my remote desktop session from a windows xp machine that has always worked, I now only have control with my mouse, but no more keyboard input.
I do not know if the filtering mode has anything to do with it, but I cannot figure out why I cannot use my keyboard anymore in RDP. Funny thing is, it DOES work when I login to windows 7, I can type my password but when the desktop is there, I cannot use the keyboard anymore..
Any suggestions anyone?
View 2 Replies
View Related
Jul 25, 2012
I am trying to setup a RDC with a static IP for my PC so I can access it from work. I started messing around with my laptop and PC trying to Remote Access them from one to another locally before doing set up my router to do port forwarding. I noticed that none of my laptops in my house can connect to my PC for Remote Access but I can connect to any laptop from my pc. I don't know what's going on. I've changed the IP on my PC 4 times and still nothing. Hard reset on my router, but nothing.
View 2 Replies
View Related
Nov 8, 2009
I cannot establish a remote desktop connection between two computers in my home LAN running Windows 7.I have two computers in my home network, VAIO and SCALEO. On VAIO I installed Windows 7. On SCALEO I installed both Windows XP and Windows 7 as dual boot configuration. The Windows 7 version I am using is the free downloadable evaluation installation of Windows 7 Enterprise. Both installations are activated.When I run Windows XP on SCALEO (and Windows 7 on VAIO), I can establish RDC between both computers, both ways, without any problems.When I run Windows 7 on SCALEO (hence, on both machines), establishing RDC fails on either machine with the following message:"Your credentials did not work. The credentials that were used to connect to ... (VAIO/SCALEO) did not work. Please enter new credentials."I have followed all instructions in the tutorial of this forum how to set up a computer for remote desktop connection. I can see both machines in their network folders. I successfully established a homegroup where both machines share data. I am able to share folders on both machines and map them as network drives. I am able to copy data between both machines.
View 3 Replies
View Related
Feb 13, 2009
How to Enable Windows 7 to make a Remote Desktop Connection ?
View 0 Replies
View Related
Dec 22, 2011
Looking for info about remote connection between desktop and laptop?
View 2 Replies
View Related
Jul 4, 2012
I am trying to use my remote desktop connection on my computer to another computer in my home I am using windows 7 but when I try to connect it looks for a password which I have not got where can I find a password
View 6 Replies
View Related
Feb 6, 2012
When I connect to my PC from my laptop via Remote Desktop, it moves all my icons. Is there any way to disable this?
View 1 Replies
View Related
Jan 4, 2011
I'm having some trouble with remote desktop connection. I have successfully configured my desktop to remotely access it. But every time I start up remote desktop connection it prompts me to "Save File As ... *.xps". The application is driven by the mstsc.exe process, so it starts up when I start my remote session. If I try to save it, it immediately prompts me again for the same thing. Also my One Note Application starts up on my client pc (Laptop) and is also triggered by the RDP connection process.
Here is what I have already tried:
- Tried to just end the Save As .. Application thru windows task manager, but since it is driven by the mstsc.exe, It also closes the remote session
- I Also checked my remote desktop settings on my laptop to check and see if there are any programs listed to start up when I connect, but no progams are set!
Also every once in a while it actually starts up without the prompt and I actually experience a perfect and smooth remote session!
View 6 Replies
View Related
Feb 10, 2012
I want to do some things on my sisters' laptop which is in other country. Here is the situation:
My computer has Windows 7 Ultimate (64 bit) installed and I am using ADSL internet connection.
My sister lives far away in UK and her lap-top is connected to internet using the wireless. Window 7 ultimate is installed at her computer too.
Since I am complete beginner, please provide me step by step tutorial. I have tried a lot of tutorials that i have found on the web, but with no success.
View 2 Replies
View Related
Feb 24, 2012
I can remote desktop from PC1 to PC2, however I cannot remote desktop from PC2 to PC1? I turned off Windows Firewall on PC1 and PC2 still couldn't remote desktop PC1.
The ports are forwarded on both PCs.
View 3 Replies
View Related
Oct 17, 2012
I have a desktop and laptop with windows 7, I want to use RDC from either side using the internet connection. Both machines are connected with same router for internet connection.
For internet, desktop is connected through LAN cable and laptop through WiFi. Can I use RDC between them without wired connection and using router/internet?
View 3 Replies
View Related
Jan 9, 2013
We have 2 printers (one color, one b/w) in our office and 4 local computers.
The printers are connected by USB to one of the computers (a PC running XP) and they are shared on the local network. All of the 4 local computers can print to either printer with no problem.
The problem is that when I use remote desktop connection from one of the PCs (the only one that has Windows 7) I can only print to 1 of the 2 printers (the color).
When I use remote desktop connection from any of the other 3 computers then I have no problem printing to either printer.
I've tried speaking to the IT guys who run our offsite server and they have been no help (despite being expensive) so I'm trying to troubleshoot as much stuff on my end as possible to avoid spending a crazy amount on them. what I can check, or what other information I can provide to make diagnosing this problem easier?
View 2 Replies
View Related
Feb 11, 2013
I hired a networking person to enable remote desktop connection between 2 computers for me. The computer I am trying to connect to uses a switch to run internet between 2 computers but I only connect to one of those computers. No-ip is set up on the computer I am trying to connect to to standardize the ip addresses and I am connecting using port 3389. What happens when I try and connect is as follows. If I have not connected for many hours (maybe 5 or more) remote desktop connection will not connect. In order for it to work I have to go to my logmein account and log into the computer there first then after logging out of the logmein connection and waiting a couple minutes I can log in using the remote connection fine. Then, for the rest of the day I can use the remote connection with no problems.
In the morning when I try again, it won't connect, I have to go to logmein once again and then it works. I thought maybe it had to do with a power setting so I created my own power profile and set everything to never sleep, hibernate or do anything except run and run at maximum performance...But that didn't affect it, I still can't log in using remote desktop connection after a long wait. I have also looked in the logs for both my Virus software (AVG) and the computer to see if anything sticks out but AVG firewall log stopped logging in November and I can't seem to reset it and the local cpu event logs don't show any issues with remote desktop connection.
View 2 Replies
View Related
Oct 12, 2009
1. What's the difference between inputting the Remote computer's IP address and inputting the Remote computer's name? When I put in the IP, it connects fine. When I put in the name, it does not connect.
2. When I click on Desktop>Network, I see 2 names for a network computer. This networked computer has been renamed from A to B, but both A and B appear in the network. Why? And how do I remove the old name (A) from the network? I think it confuses the Remote Desktop Connection Client.
View 8 Replies
View Related
Feb 9, 2012
How to check whether remote desktop connection is enabled
View 3 Replies
View Related
May 22, 2011
I need help to undertand if is possibile resolve this possible issue.I have an ACER Revo 3610r,Atom 530 processor, I'm using it with a wireless Enermax Aurora micro keyboard (with trackball included).I would use RDP from my work pc Unfortunately after I've taken the control from my work pc I'm not able to use the wireless keyboard on the host (Acer revo ) so I've to restart with the shutdown /R command.
View 5 Replies
View Related
Sep 16, 2011
I need help getting my Remote Desktop Connection to work. I have followed every tutorial on this site to no avail. My pc is WORKGROUP, there is no domain. I feel like I have tried everything and still it says my credentials did not work.I am trying to set this pc up for WOL. I have activated Remote Device Access through the Control Panel and in the BIOS. I have followed through with everything to achieve waking my pc through WOL Magic Packet sending. I just can't get the Remote Desktop Connection to work to see if I can actually access the pc and get into my files.I am setting it up to be an offsite storage unit for my place of business.
View 1 Replies
View Related
Dec 30, 2011
I am trying to access my work PC remotely after doing a fresh install of windows and receiving the below:"Remote desktop can't connect to the remote computer for one of these reasons:
1) Remote access to the server is not enabled
2) The remote computer is turned off
3) The remote computer is not available on the network
Make sure the remote computer is turned on and connected to the network, and that remote access is enabled."I have established some sort of VPN connection through the browser with work (sorry I am not very technically inclined, icon says "network connect" in the taskbar and shows I am conected), our techie guy said then just run Remote Desktop and type in my computer name and should connect, which it is not.
View 7 Replies
View Related
Nov 8, 2009
I am running Windows 7 Professional 32 bit on both my local and remote systems.
My local system uses a brother HL-5250DN printer hooked up via a network cable (otherwards, it's not directly connected).
My remote computer was running Visa Ultimate and when I connected from home, it would see the Brother printer from the Windows 7 machine.
Since I upgraded the remote system to Windows 7, the printer is no longer seen remotely.
Any suggestions?
View 2 Replies
View Related
Sep 26, 2012
how to Remote Desktop Connection connect to a Windows 7 standard account?All attempts to Remote Desktop Connection connect to a Win 7 standard account fail with:Attempts to the same account change to administrator succeed. But I cannot afford the risk of this account being administrator.The machine running RCD is Win XP, on the same switch.
View 3 Replies
View Related
