Remote Desktop Connects But Remote Host Screen Stays Black?
Nov 8, 2011
I know there have been a number of posts on this subject but I have been unable to find a solution. I have 2 Windows 7 machines, both running SP1.
My HP Pavilion is running 64-bit and my Dell Latiude E6400 is running 32-bit. I can successfully RDP from my Dell and even my Apple iPad (via an RDP client) into my HP Pavilion. However, the problem is that when I try to RDP from my Pavilion into my Dell I get connected but all I see is a BLACK from the Dell machine. The only thing i can see is the Status bar at teh top telling me that i am connected. A few moments later I get a popup message telling me that the machines have failed to communicate.
I have confirmed that RDP settings are identical on the Pavilion and Dell. I have even downgraded the Dell NVIDIA graphics driver to an older version based on the recommended version on the Dell support web site.
I am using Windows 7 Pro 64bit, trying to use Windows remote desktop to connect to another PC in the LAN and install software. Right click on the .exe and choose run as admin. As soon as I do that I get a black screen with 2 white bars in the upper left hand corner(looks like a pause button). The user who's pc I am connected to sees the log inbox for the admin creds, how ever I can not get to it. How can I make that screen stop popping up?
Scenario is. Activated Windows 7 N Ultimate as host machine (in other room) Activated Windows 7 Ultimate as client machine, am using it now.
If I remote desktop in after logging in locally on the host, I get the black screen for approx 2 minutes at which point it closes with an error. If I remote desktop in whilst the host is logged out I can connect and log in fine. If I detach from a running remote desktop session and try to relogin again, I get the black screen sympton again and have to logout locally on the host to be able to login again on remote desktop. If I try to login locally on the host whilst the black screen is up here I get rejected due to remote desktop service been busy. I have to wait for the window to close.
I recently got my remote desktop working in my home LAN, but I can ONLY connect to to my machine via its IP address. It refuses to connect through the actual computer-name as I would prefer to.
I'm assuming here that there is a possible issue with the IP is tied to the computer-name, aka some type of DNS issue. Keep in mind I am not trying to access my computer "globally" I am just trying to connect to via its computer name when I am at home and connected to my home LAN.
I connect to my work computer through a VPN and remote desktop, and often times remote desktop (I use NLA) works once, but after the first disconnect I can't login remotely. Power settings on the computer are set so it never goes asleep and never turns off the display.
In addition, when this happens, I find the computer has a black screen either before or after login when I go into my office to login directly to the computer.
This problem seems to occur on several computers, including on Win 7 Pro x32 and x64.
Any way to add Remote Desktop (host) to Windows 7 home?I upgraded to home premium and now found that I can not remote desktop TO this pc Obviously I could upgrade from home to PRO but didn't know if I can just "add" RDP to this home PC at all I realize there are 3rd party software vendors I can use (think I saw VNC, mesh, go2mtg, etc)
We have several remote systems that can all connect fine. I am having an issue with one box. It is a windows 7 home premium machine with netgear wireless nic. When I open mstsc to connect to a remote machine I put in the ip address and click on connect.I receive an immediate failure with the text "This computer can't connect to the remote computer. Try connecting again...blah blah"I have a server 2008 r2 with Network level authentication enabled. I have 8 other systems that are hardwired, at different geographic locations and all connect fine. I have not made any changes on the server side since this problem seems to be local to this client only. On the client I have made the following changes/observations. I have disabled the firewall, cleared the remote desktop cache, remove the MRU entries from the registry, verified that port 3389 is open via telnet. I have been bashing my head for days trying to figure out why this one box is not working. The problem occurs for every user on the box including the admin.I don't receive the box that prompts for warning if there is a server authentication issue but I think that is because I selected ignore at some point and said yes to continue. I'm not sure where that cache resides to delete that selection.
I have a desktop computer running Windows 7 and a thin client (Wyse V90L) running Win XP Embedded. I am using Remote Desktop to log into my desktop computer running Windows 7. The problem is that despite having set up Remote Desktop on the client to 'Play on this Computer', no audio plays. When I click on the volume control, there is no slider and instead the message 'no audio device is installed' is displayed. If I choose to leave sound at my desktop, then it functions as expected.
i have is that my win7 machine is hooked up to my TV and i want to remote control it with my laptop while still viewing it on my tv. I can remote control it with my laptop but all i see is is the login screen on my tv. I'm just wondering if its possible to view the screen on the client machine while its being controlled via Windows Remote Desktop or do i have to use third party software to accomplish this?
i would like to connect using RDC from my netbook (using windows 7 starter) to my desktop (using windows 7 professional) on the road.i have followed all the steps here: Allow Remote Desktop connections from outside your home network when i try to connect i get the dreaded "remote desktop can't connect to the remote computer" error message.
Searched the internet, forums and tried everything even removing IDT.And getting a major head ache out of this. x64 notebooks.But on 1 single notebook the RDP does not work when connecting through a VPN.(Sony Vaio S-series factory customized i7, 8GB)The office has a Draytek VPN with an 2003 AD domain.Other notebooks do not have the problem. Remote desktop locally works Remote desktop via branche office works (through hardware based vpn tunnels) MS VPN connects, network is browsable MS VPN -> RDP shows: [Configuring remote session] But after a while connection is denied MS VPN -> Fileshares - functional MS VPN -> Webserver, FTP server - functional Maybe one of you guys have a hunch why this specific situation doesn't work?
My husband has a Win 7 pc custom built by Fry's. Is there such a thing as a remote control (I guess it would need a usb dongle) to control it? Like to watch Netflix or Xfinity TV on the computer while he's in bed. He has a large monitor and then I could get him to get the pc off the kitchen table and upstairs. I tried using google but just got hits for remotely accessing from another computer. Didn't know exactly what to search for. His HP laptop came with a remote but we've never used it.
I am trying to connect to another Windows 7 machine on the same router, but it will not connect. I have remote desktop enabled and checked under the computer settings, but when I right click the computer in the network & sharing center and try to connect, it won't work. I also tried manually entering the computer's network address but it failed. Both machines are Windows 7.
Using Remote Desktop I can connect my one Win7 machine to my other Win7 machine.
However I don't see my "real" desktop - by that I mean the remote machine spawns a sort of virtual desktop and shows me that - I can't run the graphic card control panel for instance - and if a monitor is plugged into the remote machine you just see the login screen not what I'm doing.
So is it possible to see the 'real' desktop using Microsoft Remote Desktop? Or do I have to find some other remote control software - like VNC or something like that.
Here is what i would like to try and do. I have two computers, a Desktop and a Laptop. My Desktop sits at home, while my laptop goes with me to school or anywhere else that i need it.Now, i would like to see how i can set up my computers (or network?) so that i can access my Desktop files via my laptop online.I want to try and carry as few files on the laptop as possible, such as if ever lost or stolen, i wont have my data or files compromised/stolen.I also plan to install a SSD on the laptop, in order to try and make my battery last longer, but SSD's are still too expensive (i have a 250 HDD right now), I'm thinking of getting a 64GB SSD and trying to carry as few files as possible. Getting a 250 GB SSD is just way too expensive right now.I have heard that Windows has a thing called Remote Desktop Connection, but i have tried to use it, but i never got it to work somehow. I am running Windows 7 Home Premium.
I am using windows 7 ultimate on my desktop and laptop. I am trying to connect to my desktop. On my desktop I have created a credential. the name of my laptop is laptopTo make things simple lets say I put user name abc and password 123. From my laptop I put in abc for user and 123 for password I can connect to the desktop but it says invalid user name or password. I have tried creating different user names and passwords on the desktop fot the laptop. What am I doing wrong? I do not understand why this is so difficult. Its problably not but the help section in windows 7 does not give enough information.
I just set up a new computer and they both are on the same wireless network and are even connected to eachother through bluetooth. I'm trying to connect to my laptop from my desktop tower (the new one). The Remote desktop thing is asking for a log-in for the laptop. Well I do have a password, so I enter in my user name Shannon, and then my password....It doesn't work...try it again. and it doesn't work. Even though it accepts the username, the password isn't accepted, and I know 1000000% that it is right. So whats going on? The tower is running Windows 7 Home Premium 64-bit and the laptop is running Windows 7 Professional 32-bit.
I am running a lite version of windows 7 32bit in which the dev took off remote desktop. I have looked everywhere but cant find a guide to reinstalling it.
I have a desktop in a remote location used to connect to a PC in main location to run a program. The new computer put in the satellite office running Windows 7 Pro 32-bit did not have parallel ports and I needed two ... So I installed two PCI-E cards to add the ports. These print fine locally but the printers do not pass through to the Windows XP Pro machine.How can I make the PCI-E LPT ports available in the remote session?
Just recently immigrate to win 7, I used to connect my XP work computer via remote desktop from home, now I cant . The ping command works fine. How can I solve this problem?
I'm using windows 7 enterprise at work and recently on several computers remote desktop tab under system properties > remote is gone. was searching forums for this problem but found only answers that after removing service pack 1 remote tab was back, but then i have a question how come 95% of other computers don't have this problem and also tried installing fresh installations today on thinkpad edge 11 with sp1 and at the beginning remote tab was there but after installing anti virus , office and other crap and several resets remote tab was also gone
Have setup RD for Win 7 64 Ultimate (both boxes) on internal LAN. Connects no problem and the LAN operates at almost full Gbps when moving files between the two. I've disabled the A/V and firewall (Kaspersky A/V 2012 on client, MSE on host) but no changes.Even with all the RDP options stripped down it is slow. Should it not be at virtual speed even with all the bells & whistles across the LAN?
W7 will start up, load files, and then stay at a black screen with a mouse. I think that the hard drive may have gone bad, and when I did a memory diagnosis, I have found that there is bad memory with my main hard drive. I do not have the original disk, nor can I access any of the files. I tried system Recovery, but it would not list W7 as an option. If someone knows where I could find those drivers to load onto a disk, that would be great. My computer is a Dell Studio 1535.
I normally use remote desktop connection over my home network by simply typing the IP address assigned by the router to the computer I am trying to connect to.Now I am in a hotel in another city. I tried using the ip provided through ipconfig and whatsmyip.com, but I am unable to connect through remote desktop connection.
We have recently upgraded to Windows 7 at work.Our work have enabled access to my main work machine which is still on XP. I have just logged in, and for some reason the mouse icon was still visible on the machine and it was really annoying.So, here how I was connected:
MyLaptop (Windows7 Home) > Secure RDC onto Windows XP > RDC onto Windows 7 Pro
Before the last machine was upgraded, there was no extra mouse visible, but suddenly there is another mouse icon following my mouse icon.
Is there anyway this extra mouse icon can be removed?]
I'm really having a hard time configuring Remote Desktop Connection.I'm trying to set up a session between my laptop at work(Windows 7 Home Premium) and my PC at home(Windows 7 Ultimate). Now the settings are fine ('Allow Remote Assistance connections to this computer' and 'Allow connections from computers running [CODE]
When i am remote desktoping to one of our terminal servers from windows 7 and then shadowing a users session as soon as i connect to the users session via Terminal Services Manager I get the following error:'Because of a protocol error, this session will be disconnected. please try connecting to the remote computer again.'It appears to be a problem with windows 7 remote desktop, as i also have XP and Vista machines which i do the same on but they work fine!
