Remote Desktop Failure Black Screen
Aug 3, 2011
ok basically lately my remote desktop is flaky.
Scenario is. Activated Windows 7 N Ultimate as host machine (in other room) Activated Windows 7 Ultimate as client machine, am using it now.
If I remote desktop in after logging in locally on the host, I get the black screen for approx 2 minutes at which point it closes with an error.
If I remote desktop in whilst the host is logged out I can connect and log in fine. If I detach from a running remote desktop session and try to relogin again, I get the black screen sympton again and have to logout locally on the host to be able to login again on remote desktop. If I try to login locally on the host whilst the black screen is up here I get rejected due to remote desktop service been busy. I have to wait for the window to close.
View 2 Replies
ADVERTISEMENT
Nov 8, 2011
I know there have been a number of posts on this subject but I have been unable to find a solution. I have 2 Windows 7 machines, both running SP1.
My HP Pavilion is running 64-bit and my Dell Latiude E6400 is running 32-bit. I can successfully RDP from my Dell and even my Apple iPad (via an RDP client) into my HP Pavilion. However, the problem is that when I try to RDP from my Pavilion into my Dell I get connected but all I see is a BLACK from the Dell machine. The only thing i can see is the Status bar at teh top telling me that i am connected. A few moments later I get a popup message telling me that the machines have failed to communicate.
I have confirmed that RDP settings are identical on the Pavilion and Dell. I have even downgraded the Dell NVIDIA graphics driver to an older version based on the recommended version on the Dell support web site.
View 2 Replies
View Related
Feb 19, 2010
I connect to my work computer through a VPN and remote desktop, and often times remote desktop (I use NLA) works once, but after the first disconnect I can't login remotely. Power settings on the computer are set so it never goes asleep and never turns off the display.
In addition, when this happens, I find the computer has a black screen either before or after login when I go into my office to login directly to the computer.
This problem seems to occur on several computers, including on Win 7 Pro x32 and x64.
View 9 Replies
View Related
May 16, 2011
I am connected to my company's VPN and it recognizes me, but when I enter my password it says, "Logon Failed"
View 4 Replies
View Related
Nov 7, 2012
I am using Windows 7 Pro 64bit, trying to use Windows remote desktop to connect to another PC in the LAN and install software. Right click on the .exe and choose run as admin. As soon as I do that I get a black screen with 2 white bars in the upper left hand corner(looks like a pause button). The user who's pc I am connected to sees the log inbox for the admin creds, how ever I can not get to it. How can I make that screen stop popping up?
View 1 Replies
View Related
Feb 18, 2011
i have is that my win7 machine is hooked up to my TV and i want to remote control it with my laptop while still viewing it on my tv. I can remote control it with my laptop but all i see is is the login screen on my tv. I'm just wondering if its possible to view the screen on the client machine while its being controlled via Windows Remote Desktop or do i have to use third party software to accomplish this?
View 1 Replies
View Related
Aug 30, 2011
We have several remote systems that can all connect fine. I am having an issue with one box. It is a windows 7 home premium machine with netgear wireless nic. When I open mstsc to connect to a remote machine I put in the ip address and click on connect.I receive an immediate failure with the text "This computer can't connect to the remote computer. Try connecting again...blah blah"I have a server 2008 r2 with Network level authentication enabled. I have 8 other systems that are hardwired, at different geographic locations and all connect fine. I have not made any changes on the server side since this problem seems to be local to this client only. On the client I have made the following changes/observations. I have disabled the firewall, cleared the remote desktop cache, remove the MRU entries from the registry, verified that port 3389 is open via telnet. I have been bashing my head for days trying to figure out why this one box is not working. The problem occurs for every user on the box including the admin.I don't receive the box that prompts for warning if there is a server authentication issue but I think that is because I selected ignore at some point and said yes to continue. I'm not sure where that cache resides to delete that selection.
View 1 Replies
View Related
Feb 14, 2012
For the past few weeks I have noticed my laptop becoming slower and slower. As of a few days ago it has been ridiculously slow and is sometimes unresponsive to commands or keyboard. It used to go straight to a black screen with only the cursor after start up but now sometimes starts up, although very slow. Now my desktop started doing it too. I don't know what's going on with them. I had not had any virus protection for a while and recently installed webroot complete 2012 on both of them and scanned, finding nothing. My desktop sometimes loads into safe mode when I tell it to, however it still is extremely slow, SAme with he laptop. And if I try to start up the desktop on normal is stays on black screen. I have noticed that sometimes I will get the "Microsoft windows isn't responding" pop up. My control alt delete doesn't work on either of them either, it pos up suing something like " the control alt delete function could not be started blah blah blah".
View 2 Replies
View Related
May 24, 2011
I recently downloaded Oceanis so that I could change my desktop; however, today my desktop is black.
View 1 Replies
View Related
Feb 8, 2012
My desktop changed by itself and when I am online the screen goes to black every few minutes even though I am sure I disabled the sreensaver. My antivirus icon also disappeared from the website.
View 1 Replies
View Related
Dec 14, 2012
A few days ago my home built windows 7 computer did an automatic download. After the download installed itself I tried to turn on my computer. I got a black screen on my monitor. Was this download a virus?
View 1 Replies
View Related
Feb 6, 2013
Got software restore. Can't start from disc. Changed boot order, nothing. f8, f10, f12,got my no where. Won't start in safe mode. I don't have the options that the instructions with the discs say I should have. Here are my options:
1. IDE1: Pioneer DVD-RW DVRTD10RS
2. IDE0: WDC WD5000BPVT=22HX2T1
3. Network Boot: LEGACY PCI Device
1. Goes to eRecovery and just sticks there with a blue spinning wheel
2. Goes to f8 menu with no option for recovery or repair. When trying to start normally it goes to a blue screen with an error message that is gone to fast to read. Restarts
3. Goes to black screen with some unreadable stuff except for the word "failure". Restarts
View 5 Replies
View Related
Mar 12, 2012
I am stuck at a black screen with a white arrow you can move with your mouse. right click does nothing. heres what i tried so far just linking to another forum so its easier to see where i am at. really want to avoid having to reinstall windows.
View 9 Replies
View Related
Mar 17, 2012
then the desktop finally loads. It only lasts about 60 seconds before BSOD'ing again. Safe Mode seems ok, but I was in the process of typing up this thread when safe mode shut down on me randomly. I've tried restoring to earlier points and running malware scans. Minidumps are included.
View 9 Replies
View Related
Aug 20, 2012
Back when it was released, I installed Windows 8 preview on a new partition of my Windows 7 laptop. Ive been switching back and forth no problem, but about a month ago when trying to log in, I typed in my password and was stuck at the black screen with a cursor. After a few restarts and startup repairs it sorted itself out. Now, it's happened again, but this time, startup repair isn't doing the trick. It reports no OS found in the error. I am dual booting between 7 and 8, and in trying to login to 7, typing my password, it again brings me to the black screen with a cursor. I cannot press Ctrl+Alt+Del to reach the task manager and manually start explorer.exe, and same thing happens in safe mode.
I have checked my C drive and saw there were backups of my explorer.exe, so I tried to switch them up with the current one. At one point, I could get to my desktop and see all of my taskbar icons, however hovering over the taskbar would show a loading cursor and I could not open anything. Restarting again brought me back to the black screen. I have tried fixboot, fixmbr, BCD editor, etc, to no avail. I have also tried "last known good configuration", system restore (which reports no restore points...) and checking the registry to verify explorer.exe is the only listing in the Shell file. Also, virus scan MBAM and others: No viruses.
Errors: At one point with the black screen, I let it sit, and a few errors came up after an hour or so... dwm.exe unable to start correctly error 0xc000185, explorer.exe unable to start correctly error 0xc000185, then when pressing Ctrl+Alt+Del, "Failure to display security and shut down options". In viewing one of the error details, it reported problem event name InPageCoFire, damaged file name propsys.dll. I replaced that file and a clean one and no change. Right now I am using Windows 8 boot. I can see all of my files are still in the Windows 7 partition.
View 1 Replies
View Related
Jan 8, 2012
bought a dell touchscreen inspiron one 2320, thought it would be better than my two year old dell (don't see it yet). i am an average user and i am not impressed. anyway the question is why does the monitor go black after 1 minute? i have done all the normal stuff in power options. change power saving settings, change when the computer sleeps. choose when to turn off display. turn hibernation on or off. i upload to Internet and it the shutting down makes it frustrating....
View 11 Replies
View Related
Oct 4, 2012
I have an MSI Laptop which I bought about a year ago was running fine and at the beginning of September started having the issue of a black screen, for about 45-60 seconds, between the windows logo and the desktop loading.
The laptop has:
Intel Core i7 460M Processor 2.53Ghz
Genuine Windows® 7 Home Premium 64-bit
4G DDR3 memory
Nvidia GeForce GT 540M
15.6" 1366x768 HD
Intel® HD Graphic VGA
[code].....
The above 3 files exist in the directories asked for so not sure why it can't load them.Although the laptop works fine when it's loaded, the additional time on this blackscreen is just winding me up as it didn't do it before.
View 3 Replies
View Related
Feb 6, 2013
my desktop screen suddenly has a 3 inch vertical black line which splits the screen in two and makes it impossible to move the cursor from the right side to the left.
View 1 Replies
View Related
Nov 12, 2012
i would like to connect using RDC from my netbook (using windows 7 starter) to my desktop (using windows 7 professional) on the road.i have followed all the steps here: Allow Remote Desktop connections from outside your home network when i try to connect i get the dreaded "remote desktop can't connect to the remote computer" error message.
View 1 Replies
View Related
May 18, 2011
Searched the internet, forums and tried everything even removing IDT.And getting a major head ache out of this. x64 notebooks.But on 1 single notebook the RDP does not work when connecting through a VPN.(Sony Vaio S-series factory customized i7, 8GB)The office has a Draytek VPN with an 2003 AD domain.Other notebooks do not have the problem. Remote desktop locally works Remote desktop via branche office works (through hardware based vpn tunnels) MS VPN connects, network is browsable MS VPN -> RDP shows: [Configuring remote session] But after a while connection is denied MS VPN -> Fileshares - functional MS VPN -> Webserver, FTP server - functional Maybe one of you guys have a hunch why this specific situation doesn't work?
View 2 Replies
View Related
Nov 22, 2011
My husband has a Win 7 pc custom built by Fry's. Is there such a thing as a remote control (I guess it would need a usb dongle) to control it? Like to watch Netflix or Xfinity TV on the computer while he's in bed. He has a large monitor and then I could get him to get the pc off the kitchen table and upstairs. I tried using google but just got hits for remotely accessing from another computer. Didn't know exactly what to search for. His HP laptop came with a remote but we've never used it.
View 3 Replies
View Related
Jul 8, 2012
I am trying to connect to another Windows 7 machine on the same router, but it will not connect. I have remote desktop enabled and checked under the computer settings, but when I right click the computer in the network & sharing center and try to connect, it won't work. I also tried manually entering the computer's network address but it failed. Both machines are Windows 7.
View 3 Replies
View Related
Feb 27, 2012
Using Remote Desktop I can connect my one Win7 machine to my other Win7 machine.
However I don't see my "real" desktop - by that I mean the remote machine spawns a sort of virtual desktop and shows me that - I can't run the graphic card control panel for instance - and if a monitor is plugged into the remote machine you just see the login screen not what I'm doing.
So is it possible to see the 'real' desktop using Microsoft Remote Desktop? Or do I have to find some other remote control software - like VNC or something like that.
View 5 Replies
View Related
Feb 16, 2012
Here is what i would like to try and do. I have two computers, a Desktop and a Laptop. My Desktop sits at home, while my laptop goes with me to school or anywhere else that i need it.Now, i would like to see how i can set up my computers (or network?) so that i can access my Desktop files via my laptop online.I want to try and carry as few files on the laptop as possible, such as if ever lost or stolen, i wont have my data or files compromised/stolen.I also plan to install a SSD on the laptop, in order to try and make my battery last longer, but SSD's are still too expensive (i have a 250 HDD right now), I'm thinking of getting a 64GB SSD and trying to carry as few files as possible. Getting a 250 GB SSD is just way too expensive right now.I have heard that Windows has a thing called Remote Desktop Connection, but i have tried to use it, but i never got it to work somehow. I am running Windows 7 Home Premium.
View 2 Replies
View Related
Apr 23, 2011
I am using windows 7 ultimate on my desktop and laptop. I am trying to connect to my desktop. On my desktop I have created a credential. the name of my laptop is laptopTo make things simple lets say I put user name abc and password 123. From my laptop I put in abc for user and 123 for password I can connect to the desktop but it says invalid user name or password. I have tried creating different user names and passwords on the desktop fot the laptop. What am I doing wrong? I do not understand why this is so difficult. Its problably not but the help section in windows 7 does not give enough information.
View 1 Replies
View Related
Jul 7, 2011
When i try to add users, i only find my self how do i add other users ?
(let's say someone around the world ? )
i forwarded the port, did everything.
now i need to add the user to give him acsses ( Allow remote acsses to you computer > Select Users > Add)
View 2 Replies
View Related
Aug 26, 2011
I just set up a new computer and they both are on the same wireless network and are even connected to eachother through bluetooth. I'm trying to connect to my laptop from my desktop tower (the new one). The Remote desktop thing is asking for a log-in for the laptop. Well I do have a password, so I enter in my user name Shannon, and then my password....It doesn't work...try it again. and it doesn't work. Even though it accepts the username, the password isn't accepted, and I know 1000000% that it is right. So whats going on? The tower is running Windows 7 Home Premium 64-bit and the laptop is running Windows 7 Professional 32-bit.
View 4 Replies
View Related
Oct 16, 2011
Remote Desktop Allowed
Regedit set to 3389
Norton 360 mstsc.exe allowed in traffic rules
ping to workstation replied
just can't get remote desktop to connect? any other things I should check?
View 9 Replies
View Related
Jan 5, 2012
I am running a lite version of windows 7 32bit in which the dev took off remote desktop. I have looked everywhere but cant find a guide to reinstalling it.
View 5 Replies
View Related
Mar 19, 2012
I have a desktop in a remote location used to connect to a PC in main location to run a program. The new computer put in the satellite office running Windows 7 Pro 32-bit did not have parallel ports and I needed two ... So I installed two PCI-E cards to add the ports. These print fine locally but the printers do not pass through to the Windows XP Pro machine.How can I make the PCI-E LPT ports available in the remote session?
View 2 Replies
View Related
Oct 17, 2009
Just recently immigrate to win 7, I used to connect my XP work computer via remote desktop from home, now I cant . The ping command works fine. How can I solve this problem?
View 9 Replies
View Related
