I am trying to connect to another Windows 7 machine on the same router, but it will not connect. I have remote desktop enabled and checked under the computer settings, but when I right click the computer in the network & sharing center and try to connect, it won't work. I also tried manually entering the computer's network address but it failed. Both machines are Windows 7.
View 3 Replies
We have several remote systems that can all connect fine. I am having an issue with one box. It is a windows 7 home premium machine with netgear wireless nic. When I open mstsc to connect to a remote machine I put in the ip address and click on connect.I receive an immediate failure with the text "This computer can't connect to the remote computer. Try connecting again...blah blah"I have a server 2008 r2 with Network level authentication enabled. I have 8 other systems that are hardwired, at different geographic locations and all connect fine. I have not made any changes on the server side since this problem seems to be local to this client only. On the client I have made the following changes/observations. I have disabled the firewall, cleared the remote desktop cache, remove the MRU entries from the registry, verified that port 3389 is open via telnet. I have been bashing my head for days trying to figure out why this one box is not working. The problem occurs for every user on the box including the admin.I don't receive the box that prompts for warning if there is a server authentication issue but I think that is because I selected ignore at some point and said yes to continue. I'm not sure where that cache resides to delete that selection.
View 1 Replies View RelatedRemote Desktop Allowed
Regedit set to 3389
Norton 360 mstsc.exe allowed in traffic rules
ping to workstation replied
just can't get remote desktop to connect? any other things I should check?
Just recently immigrate to win 7, I used to connect my XP work computer via remote desktop from home, now I cant . The ping command works fine. How can I solve this problem?
View 9 Replies View Relatedi would like to connect using RDC from my netbook (using windows 7 starter) to my desktop (using windows 7 professional) on the road.
i have followed all the steps here: Allow Remote Desktop connections from outside your home network when i try to connect i get the dreaded "remote desktop can't connect to the remote computer" error message.
Microsoft is gearing up to release a tool that will permit users of Windows Vista and Windows XP computers to connect to Windows 7 machines, and to take advantage of features that only the latest version of the Windows client brings to the table. Bridging Vista and XP with Windows 7 will be possible through the Remote Desktop Connection (RDC) 7.0 client.
The Redmond-based company has been cooking the client for some time now, and it appears that the baking time is almost over. There’s still no definitive delivery deadline, but with Windows 7 general availability now almost a month away, Remote Desktop Connection 7.0 GA is bound to follow.
i would like to connect using RDC from my netbook (using windows 7 starter) to my desktop (using windows 7 professional) on the road.i have followed all the steps here: Allow Remote Desktop connections from outside your home network when i try to connect i get the dreaded "remote desktop can't connect to the remote computer" error message.
View 1 Replies View RelatedI'm using Win7 Professional at home and winxp at my office. I can connect fine from home to office but can't connect from my office to home. I have gone through all of the google searchs and all of the posts on this forum without any luck. I have checked that my modem has port 3389 forwarded. I have confirmed that it's listening on that port. I have checked all the firewall settings, and even turned off the firewall and still can't connect.
View 6 Replies View Related
I want to do some things on my sisters' laptop which is in other country. Here is the situation:
My computer has Windows 7 Ultimate (64 bit) installed and I am using ADSL internet connection.
My sister lives far away in UK and her lap-top is connected to internet using the wireless. Window 7 ultimate is installed at her computer too.
Since I am complete beginner, please provide me step by step tutorial. I have tried a lot of tutorials that i have found on the web, but with no success.
We have 2 printers (one color, one b/w) in our office and 4 local computers.
The printers are connected by USB to one of the computers (a PC running XP) and they are shared on the local network. All of the 4 local computers can print to either printer with no problem.
The problem is that when I use remote desktop connection from one of the PCs (the only one that has Windows 7) I can only print to 1 of the 2 printers (the color).
When I use remote desktop connection from any of the other 3 computers then I have no problem printing to either printer.
I've tried speaking to the IT guys who run our offsite server and they have been no help (despite being expensive) so I'm trying to troubleshoot as much stuff on my end as possible to avoid spending a crazy amount on them. what I can check, or what other information I can provide to make diagnosing this problem easier?
Is there a way to unattended remote connect to a desktop, using existing MS tools, and share the desktop, without having to wait on the other user to give me a thumbs up?I work on a remote PC, and need the user there to be able to view the desktop while I work on it. However I also need them to also not have to directly give me access each time, such as the case with the help me request application (Windows Remote Assistance normal setup)
View 3 Replies View Relatedis it true the only Professional and Ultimate versions of Windows 7 can accept Remote Desktop Connection requests? I read on a post from 2009 that "any version of Windows 7 can act as a Remote Desktop client, but only Ultimate and Profession can host a Remote Desktop."I'm not sure I completely understand that - I do understand what host and client mean. However,d despite lots of different setting changes, I can't connect to this Windows machine using Remote Desktop.
View 1 Replies View RelatedI'm encountering a very frustrating problem connecting to my office PC (which is Windows 7 Professional). No matter what client I use (Windows 7 built in remote desktop from a W7HP machine, Remote Desktop Client on Android, etc.) when I log on to the host machine it re-logs me on. Basically it seems to kill the previous log on session, logs it off, and then logs me in anew. This is really annoying. It closes all open apps and makes me reopen them. It takes much longer than a usual connection. I can't seem to find any reason for why this might happen, the only difference between this and the thousands of connections I've made over the years using RDP is that this is being done over our work VPN (A SonicWall VPN client). I don't see why that would make any difference but it's the only variable.
View 1 Replies View RelatedI have setup Remote Desktop on two different Windows 7 computers and I am unable to connect to them. I have followed several examples, which are the same on setting this up, but still unable to connect. The examples show trying to connect using the computer name and user name. If you are connecting say from your office computer to your home computer, do you not have to enter the IP address somewhere or does it just connect via the computer name?
I have yet to find anywhere to enter an IP address or connect any way beside just using the computer name. I am setting this up to connect Windows 7 to Windows 7.
how to Remote Desktop Connection connect to a Windows 7 standard account?All attempts to Remote Desktop Connection connect to a Win 7 standard account fail with:Attempts to the same account change to administrator succeed. But I cannot afford the risk of this account being administrator.The machine running RCD is Win XP, on the same switch.
View 3 Replies View RelatedI can connect my local laptop to a remote desktop using Cisco Any Connect VPN on windows 7. I can use the internet, send emails, work with files on the remote computer.However if I switch back to the local laptop computer and use the internet, send emails, or open files the remote connection closesI get the folowing errorRemote Desktop Connection has stopped workingA problem caused the program to stop working correctly.
View 7 Replies View RelatedI am trying to configure Remote Desktop Access to work over the internet. Remote Desktop Access works on my local network.
Both of my computers are on Windows 7 Professionnal. My router is a Belkin F9K1002.
I followed the official widows tutorial. I forwarded the necessary port on my router (I switched from port 3389 to 50000, in case 3389 was blocked by my isp).
Every time I try to connect I get
"Remote Desktop can't connect to the remote computer for one of these reasons:
1)Remote access to the server is not enabled
2)The remote computer is turned off
3)The remote computer is not available on the network Make sure the remote computer is turned on and connected to the network, and that remote access is enabled."
I have a Win 7 Home Premium box along with 4 WinXP boxes in a simple network. My Win 7 box can Remote Desktop to any of the WinXP boxes, and be used to "drive" them, no problem.I added a new machine yesterday that came with Win 7 Home PremiumAfter searching through other threads, I found it was stated that if I upgrade the new box to Win 7 Pro or Ultimate, I can then use my original Win 7 Home Prm to connect to, and "drive" the new Win 7 Ult. box.I successfully upgraded the new box, it's now confirmed to be running Win 7 Ultimate. I have also disabled the firewall, and checked the Remote Box Settings:Allow connections from computers running any version of Remote Desktop (less secure).However, the Home box cannot connect to the Ultimate box. It times out with the following error:Remote Desktop can't connect to the remote computer for one of these reasons:1) Remote access to the server is not enabled2) The remote computer is turned off3) The remote computer is not available on the network.
View 1 Replies View RelatedI know there have been a number of posts on this subject but I have been unable to find a solution. I have 2 Windows 7 machines, both running SP1.
My HP Pavilion is running 64-bit and my Dell Latiude E6400 is running 32-bit. I can successfully RDP from my Dell and even my Apple iPad (via an RDP client) into my HP Pavilion. However, the problem is that when I try to RDP from my Pavilion into my Dell I get connected but all I see is a BLACK from the Dell machine. The only thing i can see is the Status bar at teh top telling me that i am connected. A few moments later I get a popup message telling me that the machines have failed to communicate.
I have confirmed that RDP settings are identical on the Pavilion and Dell. I have even downgraded the Dell NVIDIA graphics driver to an older version based on the recommended version on the Dell support web site.
I am using Windows 7 Pro 64bit, trying to use Windows remote desktop to connect to another PC in the LAN and install software. Right click on the .exe and choose run as admin. As soon as I do that I get a black screen with 2 white bars in the upper left hand corner(looks like a pause button). The user who's pc I am connected to sees the log inbox for the admin creds, how ever I can not get to it. How can I make that screen stop popping up?
View 1 Replies View Relatedcan i connect to my server which more that 100 mts far away
View 1 Replies View RelatedHow do you connect to another PC using remote access, I can connect to another computer at my house but I want to connect to my uncle's from Arizona to California. What IP adress do you write down because everyone has the same 192.168.1.1 so if i put that it will connect to another one in my house. Is there some other IP adress that I can use. How can i connect to his PC.
View 3 Replies View RelatedWindows 7 (64-bit) will not connect to a remote location via VPN. I connect from my desktop running windows XP, but cannot connect on my Toshiba laptop running Windows 7.
View 2 Replies View RelatedI have 3 computers with Windows 7 Pro.
I can use remote control between 2 of them, but I can not connect from any of those two to the third one. All the services needed for remote control are running, and I have tried several tutorials on how to set up remote control...and nothing. Again, only on third computer remote control does not work. On that computer I have 2 accounts: one standard and one admin. I have put admin account under "Select users" and did not help. Tried with enabled Administrator account and nothing. Below you will see the picture which describes the problem. I can not select who can connect.
I can't connect to the remote VPN. I did it successfully 1 week ago, when using XP. Verifying username and password stays too long and after that this error occurs. I've tried many things, but none of them worked. It is 100% sure that I enter the correct username, password and domain name.
Here is my dxdiag:
[Code] .....
just last night after i was finished playing skyrim for the night, i saw on steam that i had no connection. so i looked towards the internet bars icon next to the clock and saw a yello triangle with a "!" in it. so i disconnected and reconnected but still the yellow "!". so i just decided i would try again tomorrow (today).when i woke up today it didn't have that error, so i decided to go to Internet on chrome, but it had that "webpage not available" (wouldn't work for ie either). i figured it would soon fix itself like it always had, so i tried playing mw3 on my xbox, but it wouldn't connect to live either o.o and when my mom wanted to watch netflix on the living room xbox, she couldn't connect either! then i figured out it was definatly my modem that was refusing to connect to anything.
View 9 Replies View RelatedSearched the internet, forums and tried everything even removing IDT.And getting a major head ache out of this. x64 notebooks.But on 1 single notebook the RDP does not work when connecting through a VPN.(Sony Vaio S-series factory customized i7, 8GB)The office has a Draytek VPN with an 2003 AD domain.Other notebooks do not have the problem. Remote desktop locally works Remote desktop via branche office works (through hardware based vpn tunnels) MS VPN connects, network is browsable MS VPN -> RDP shows: [Configuring remote session] But after a while connection is denied MS VPN -> Fileshares - functional MS VPN -> Webserver, FTP server - functional Maybe one of you guys have a hunch why this specific situation doesn't work?
View 2 Replies View RelatedI have a hosted Linux server running CentOS 5 with Samba 3.4. Everything is setup and it is accessible via Linux machines by typing [URL] in a Firefox address bar. I am trying to set up a local network share on a Windows 7 Home Premium x64 SP1 computer. I have tried entering the IP address in 2 locations:1. Map Network drive. I select a drive letter and type in the ip \12.345.678.9 It asks for credentials and I enter the user info for the user I created on the Linux machine. It thinks a moment then pops back up asking for credentials. It doesn't say they are invalid, just never goes through.2. Connect to a website (under Map Network Drive). I type the IP [URL] and click connect and it pops up a dialog saying "The folder you entered does not appear to be valid. Please choose another".
I have tried creating a loopback adapter and trying to setup a connection via SSH using the guide found at [URL]. After completing the tutorial (substituting my server IP address for the destination address given) I try using the Run dialog as indicated and get a "Windows cannot connect to.." error and the diagnose connection button. One thing that may be causing problems there is that the loopback adapter is labeled as an unidentified network and thus stuck as a public connection, and I am unable to change it. Searching for solutions to that brings up things I can't access (no group policy editor on Home Premium) or results in no change (setting DHCP server, which I tried setting to my router).
My husband has a Win 7 pc custom built by Fry's. Is there such a thing as a remote control (I guess it would need a usb dongle) to control it? Like to watch Netflix or Xfinity TV on the computer while he's in bed. He has a large monitor and then I could get him to get the pc off the kitchen table and upstairs. I tried using google but just got hits for remotely accessing from another computer. Didn't know exactly what to search for. His HP laptop came with a remote but we've never used it.
View 3 Replies View RelatedUsing Remote Desktop I can connect my one Win7 machine to my other Win7 machine.
However I don't see my "real" desktop - by that I mean the remote machine spawns a sort of virtual desktop and shows me that - I can't run the graphic card control panel for instance - and if a monitor is plugged into the remote machine you just see the login screen not what I'm doing.
So is it possible to see the 'real' desktop using Microsoft Remote Desktop? Or do I have to find some other remote control software - like VNC or something like that.
Here is what i would like to try and do. I have two computers, a Desktop and a Laptop. My Desktop sits at home, while my laptop goes with me to school or anywhere else that i need it.Now, i would like to see how i can set up my computers (or network?) so that i can access my Desktop files via my laptop online.I want to try and carry as few files on the laptop as possible, such as if ever lost or stolen, i wont have my data or files compromised/stolen.I also plan to install a SSD on the laptop, in order to try and make my battery last longer, but SSD's are still too expensive (i have a 250 HDD right now), I'm thinking of getting a 64GB SSD and trying to carry as few files as possible. Getting a 250 GB SSD is just way too expensive right now.I have heard that Windows has a thing called Remote Desktop Connection, but i have tried to use it, but i never got it to work somehow. I am running Windows 7 Home Premium.
View 2 Replies View Related
