Can't Connect To Remote Linux Server To Create Network Share
Mar 28, 2011
I have a hosted Linux server running CentOS 5 with Samba 3.4. Everything is setup and it is accessible via Linux machines by typing [URL] in a Firefox address bar. I am trying to set up a local network share on a Windows 7 Home Premium x64 SP1 computer. I have tried entering the IP address in 2 locations:1. Map Network drive. I select a drive letter and type in the ip \12.345.678.9 It asks for credentials and I enter the user info for the user I created on the Linux machine. It thinks a moment then pops back up asking for credentials. It doesn't say they are invalid, just never goes through.2. Connect to a website (under Map Network Drive). I type the IP [URL] and click connect and it pops up a dialog saying "The folder you entered does not appear to be valid. Please choose another".
I have tried creating a loopback adapter and trying to setup a connection via SSH using the guide found at [URL]. After completing the tutorial (substituting my server IP address for the destination address given) I try using the Run dialog as indicated and get a "Windows cannot connect to.." error and the diagnose connection button. One thing that may be causing problems there is that the loopback adapter is labeled as an unidentified network and thus stuck as a public connection, and I am unable to change it. Searching for solutions to that brings up things I can't access (no group policy editor on Home Premium) or results in no change (setting DHCP server, which I tried setting to my router).
I'm setting up home media server. At least trying to...My home network looks like this:2 laptops (ubuntu/windows7) and a home server (ubuntuServer + Samba).I've samba setup in a way to provide password-less access to share folders. I secured it by blocking all IPs but the range I use at home. (I can provide config details upon request).With ubuntu laptop, I can connect to server without any issue. I just go to network tabs and can see windows WORKGROUP share smb share both pointing to same folder. So all works good. I can also mount external drive without issue, or create network drive. Connection never times out and it stays all good.
.Problem#1 Using "map network drive" tool I cannot use hostname (server.local) I've to use IP. This means that every time server box is asigned a new IP by my dumb router I have to delete the drive and run wizard again. This is very annoying. Since IP doesn'ts tay static I cannot use WINS or map IP in hosts file. So I'm open to suggestions from your side.
Problem#2 Windows 7 disconnects network drive every 15 minutes (I think), on SAMBA I configured to stay live all the time. But windows has its own mind so it doesn't keep connection live. This results in, lateness when I try to go to my computer as OS tries to find and add drive on network. Every 2 times in 5 this procedure gives me error, host cannot be reached or something like this. So I've to delete folder and remap drive again, which surprisingly works every time! so annoying! I don't have to do this in ubuntu at all, I don't understand why windows behaves in this way.
Problem#3 Very often I cannot ping linux server from windows using hostname, like this: ping server.local - but I can at the same time ping with IP. And also from ubuntu atm I can ping server.local without any problems.
I curently RDC to my work computer and run the program I need from the work computer and just rely on the screen redrawing. I have the same program on my home computer and was wondering how to map the network drive or what settings to change on the server03 so that I could use that drive on the remote computer as a directory on my home computer for the program I want to use at home.
Windows 7 (64-bit) will not connect to a remote location via VPN. I connect from my desktop running windows XP, but cannot connect on my Toshiba laptop running Windows 7.
I am trying to configure Remote Desktop Access to work over the internet. Remote Desktop Access works on my local network.
Both of my computers are on Windows 7 Professionnal. My router is a Belkin F9K1002.
I followed the official widows tutorial. I forwarded the necessary port on my router (I switched from port 3389 to 50000, in case 3389 was blocked by my isp).
Every time I try to connect I get
"Remote Desktop can't connect to the remote computer for one of these reasons:
1)Remote access to the server is not enabled
2)The remote computer is turned off
3)The remote computer is not available on the network Make sure the remote computer is turned on and connected to the network, and that remote access is enabled."
For some reason my laptop takes forever to connect to a shared drive on my desktop on my home network. I've tried connecting to it by mapping the drive and through windows explorer and same thing. Sometimes it won't even connect at all. I don't have this issue with other computers on the network. And when I say a long time I am meaning like 5 minutes or more. At first it was maybe only 1-2 minutes but it is getting worse. My mouse icon has had the spinning ring around it trying to connect the whole time I have been writing this.Both computers are Win 7 pro x64 with sp1. Desktop is wired directly to the router and laptop has excellent signal strength. Both have DHCP reservations set in the router. The way I usually connect is by starting a run box and typing \[desktop pc name][share] then it just spins
Have been a LONG LONG user of Linux as a server (hosting VM's XP / Windows 7 mix) and file / print sharing.
I used to avoid MS like the plague as far as SERVER environments are concerned - probably because my first experince was Windows NT (Windows NeanderThal or Windows No Thanks) which was SO HORRIBLE that it put me off Windows servers for ages.
(Note I'm using a server in a HOME environment where we have around 8 machines (most of which are actually mine for testing -- not a corporate environment which has other considerations).
The problem now with the latest Linux distros that they are trying to be "A Better Windows than Windows". You can of course customize them but I haven't got the time or patience to do this any more. To select what packages to install / leave out now is a 100% pain and if you do it wrong the chances are the system will give errors.
I've looked at the new SUSE 11.2 -- slick and polished - bit I don't NEED "an alternative Windows".
I've just been looking at Windows Server 2008 R2 (got it from Technet) and I'm REALLY IMPRESSED with it so far. I've installed the STANDARD version - you don't need datacenter or Enterprise version for a home server.
It runs vmware server on it just fine (although I might go the whole hog and use the Hyper-V virtualisation -- need to do a bit more research).
I'm quite happy letting MS do the updates than having to mess around with Kernel compiles etc.
Incidentally as a HOME server there are some considerations that you might want to do to make it more like a Desktop OS than a pure server for example add multi-media to it.
This guy does a great job at this .
Convert your Windows Server 2008 R2 to a Workstation! - Multiboot Installation
Windows 7 VM's run just fine on W2008 server (they should as there is a lot of common code).
i have following problem. At work we have HP proliant ml350 server with windows server 2008 on it, 3x windows 7 client and 25x win xp sp2 clients. Network doesn't work, clients cant see each other, can't see server and server can't see them in network and sharing center. What could be a problem? Is ipv6 protokol on windows 7 obstructing a server or something else?
how to share files with linux (samba) and with xp and other windows 7 machines? Been on windows 7 for a full 72 hours, like it so far, there are a few things not familiar with yet.
We have several remote systems that can all connect fine. I am having an issue with one box. It is a windows 7 home premium machine with netgear wireless nic. When I open mstsc to connect to a remote machine I put in the ip address and click on connect.I receive an immediate failure with the text "This computer can't connect to the remote computer. Try connecting again...blah blah"I have a server 2008 r2 with Network level authentication enabled. I have 8 other systems that are hardwired, at different geographic locations and all connect fine. I have not made any changes on the server side since this problem seems to be local to this client only. On the client I have made the following changes/observations. I have disabled the firewall, cleared the remote desktop cache, remove the MRU entries from the registry, verified that port 3389 is open via telnet. I have been bashing my head for days trying to figure out why this one box is not working. The problem occurs for every user on the box including the admin.I don't receive the box that prompts for warning if there is a server authentication issue but I think that is because I selected ignore at some point and said yes to continue. I'm not sure where that cache resides to delete that selection.
Linux was installed on a server; Client required Windows 7; I uses USB key (always works) to install Windows 7. Formatted it but on reboot PC hung on the word 'Grub".
I have a working local Laserprinter under 64bit Win7. Through LAN another Win7 computer is connected. The remote computer can access local shared folders successfully. But it cannot access the local laser printer (connected through USB). How can I share the local printer to other computers in LAN? Do I have to define local printers explicitely as shared/accessible? Or are they automatically accessible (provided that the local user account and passwort is known at the remote computer? Do I have to install the printer driver in general at the remote computer as well or is the printer driver on the local computer enough?
I am using a VPN connection from my Android phone to my home PC by using the "default" Windows 7 (Ultimate x64) VPN feature. The connection works fine, but when I connect with my phone running Android 2.3.6 to this VPN, I loose the Internet connection on my phone and am only able to access the home LAN. Since the Android client doesn't have much settings to configure in this area, I figured the solution to my problem would be if the VPN server could share it's Internet connection to the VPN.
The "Home Premium" version of Windows that comes with most retail computers includes a one-sided (and intentionally crippled) Remote Desktop subsystem that allows my computer to connect to other computers, but doesn't allow other users on my network to remotely control my computer from their desktops. Is there any free software that can take the place of the missing RDP server component? (I'm not ashamed to admit, I'm a cheap S.O.B. who doesn't want to pay to upgrade Windows on all the machines on my home network, especially when this is the only component from the pricier versions that I want or need.)
I recently upgraded from windows XP to 7. The problem is I can no longer connect to my shares on the server. Windows prompts me for a username and password and once I input this info, the same prompt shows up again.I have realised the domain it uses in the prompt (for username and password) is the same as the machine name and I have no field to input the domain manually.
I have a computer running Windows Server 2003 that i would like to connect to my computer running Windows 7 ultimate. i have done everything it says to in the videos and tutorials but i cannot get the server to connect to the internet. i can connect to it via remote desktop but it cannot connect to the internet nor can any other computers on my network see the server only the Windows 7 PC that the server is connected to. FYI - I have the win server 2003 connected to the Win 7 computer via Ethernet and i set up saring on the win 7 computer but it still cannot connect to the internet.
I manage AD and 30+ servers at a community college. I just got a new computer for my office and loaded Windows 7. I also loaded the Remote Server Admin Tools so that I may manage my servers. The old Windows XP Admin Tools had a tool called IP Address Management. This tool combined DNS, DHCP, and WINS management all in the same window and the DHCP would keep the server setups on exit. I can't find this tool in the RS Admin Tools for Windows 7. Does anyone know where I can get a tool like this for Windows 7?
i would like to connect using RDC from my netbook (using windows 7 starter) to my desktop (using windows 7 professional) on the road.i have followed all the steps here: Allow Remote Desktop connections from outside your home network when i try to connect i get the dreaded "remote desktop can't connect to the remote computer" error message.
I'm fairly new to using SSH and I'm trying to use it via cygwin. I've only been able to connect locally so I was wondering how to make a hostname such as [url]... so I can connect remotely from anywhere I want. Do I need to pay for a domain to route traffic or can i make my own locally that can be accessed anywhere?
Is it possible, to grant permission a user to create share of any folder of his PC in active directory environment. User can only create a share folder for other user, at the same time that user denied for any administrative power.
I have two Windows 7 machines which both flawlessly access my Home Server 2011 via Remote Desktop.When I attempt to access the Hone Server via Live Live Mesh "Connect to this Computer" I receive a log in screen request for a Ctrl-Alt-Del. Clicking the Remote Desktop Window link to issue the request has no affect. No other action is available except to disconnect from the server.
If I wanted to keep my current home computer as my main server & be able to access it remotely via laptop any where in the world if I'm away for whatever reason.
What kind of laptop would be best?
My business is websites, so I almost automatically jump to an apple since its pushed more for the graphics/artists
But I also like the dells & alienwares.
I'd also like them to talk wirelessly/via bluetooth while they are in the same room together to "sync" up.
I'm just not sure which way to go.
I wont be gaming, just heaving internet surfing & web design/work.
I run Windows 7 64 & Ubuntu 64 (though I havent used it as much since Windows 7 64 came out)
With NTFS and Share permissions is there any way I can allow a user to (in a specific folder):
- Edit and overwrite existing files (like a notepad file) But - Not be allowed to create new files or folders
I have spent quite a while staring at the special permissions screen. When reading about the meanings of the special permissions from the Microsoft, it says that the "Create Files/Write Data" permission allows for the overwriting of existing files but it also allows for the creation of new files. Is there some way i can have one without the other? Split the permission? I have also been told that there is a flaw to this as when you open a word document it creates a temp file in the folder where the word document is, and having permissions set this way would cause the word document not to be able to open because it couldn't create that temp file.
I am setting up a new share database to use with BCM 2010. I setup the new server 2008 R2 Installs SQL server 2008 express with management tools and called it MSSMLBIZ Install outlook 2010 and BCM and SQL 2008 express on a new windows 7 PC When I tried to connect my windows 7 pc to a new share database. I put in my servername and it found the databases I create and shared. But when I try to choose one they are all grayed and I cannot hit the connection button. I tried changing the permission in the data base (SQL). Using the administrator to log in resetting the ip port to 5356 more info we are in a small domain ( SBS 2003 ) All the firewall are turned off on the server and machine
I am a database programmer. I publish a client-server application. I have a client who is adding Win7 Pro workstations to their existing network, which at the present time consists of WinXP workstations talking to a Windows Server 2008 R2.The application needs to be able to create and destroy temporary files on the server. The XP workstations have no problem doing this, so the server permissions are set correctly. However, the Win7 workstation is unable to create the files as needed. The same user and folders are being used, so the only difference is the workstation OS.The folders are visible and can be accessed; the application runs, and can read and write existing files on the server, it just can't create/destroy files there.I am not able to recreate the problem here, but I do not have anywhere near as sophisticated a network so I can't truly reproduce their environment.
I have over that last few years been setting up a system of computers around my home, and now that the last one is in place (it was not planed in any way, however I have decided that I have enough computes scattered around) I want to set up a home server so that I can log onto the "same data" from any one of these computes, the problem is that only one of these computers is really fast enough and expandable enough (one is a desktop, all the others are laptops in clam-shell mode plugged into a monitor) to run a server. I have a lot of important data on the Hard drive, however I boot off a SSD, If in installed windows home server on that SSD could I still use that computer regularly?, that is as I normally would use that computer now with Windows 7 installed on it? also could I still access my Data on the HDD, and would is significantly slow down that computer in any way?
