Share The Wifi On Windows 7 Computer With A Server 2003?
Oct 5, 2011
I have a computer running Windows Server 2003 that i would like to connect to my computer running Windows 7 ultimate. i have done everything it says to in the videos and tutorials but i cannot get the server to connect to the internet. i can connect to it via remote desktop but it cannot connect to the internet nor can any other computers on my network see the server only the Windows 7 PC that the server is connected to. FYI - I have the win server 2003 connected to the Win 7 computer via Ethernet and i set up saring on the win 7 computer but it still cannot connect to the internet.
Is it possible to boot Windows Server 2003 from this VHD using Windows 7 VHD native support? If not, is it possible to create a bootable Windows Server 2003 VHD that dual boots with Windows 7?
When trying to copy a folder from Server 2003 to my Windows 7 64 bit it ends up freezing but I tried it on a xp computer nearby and the folder copied over in a minute.
I had three operating systems in my computer: Ubunt, Win XP and Win Server 2003. Grub was the booting program, that offers you go to Windows loader. When I selected this, I could choose between XP and Server 2003, according to XP boot.ini file.Yesterday I got Windows 7 installed over XP. Everything seemed to be fine. I got back Grub booting with Super Grub. When I boot the computer I choose Windows booting, and now, Windows 7 menu is shown.First options here were:
- Previous Windows version - Windows7
Firtst entry did not work: when you select it the computer just hungs up doing nothing, showing nothing, totally black.I installed EasyBCD and tried to edit boot menu: adding new entry to be autodetected or selecting the drive, but I get just absolutely nothing. When I choose this new entry to be loaded, same result: black screen.These are my curent booting settings:There are a total of 3 entries listed in the bootloader.
Default: Windows 7 Timeout: 15 seconds Boot Drive: C: Entry #1 Name: Versi�n anterior de Windows BCD ID: {ntldr}
[code]....
I tried also copying a regular boot.ini file (see below) into the Server 2003 partition, but all I got with this is, instead a black screen, a message saying that system in " NSTeasyldr1" cannot be loaded by some hardware/software error (no more options but to go back)
Code: [boot loader] timeout=5 default=multi(0)disk(0)rdisk(0)partition(1)WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)WINDOWS="Windows Server 2003, Enterprise" /noexecute=optout /fastdetect As said, I am totally desperated with this, I really need my server 2003 getting launched
I had three operating systems in my computer: Ubunt, Win XP and Win Server 2003. Grub was the booting program, that offers you go to Windows loader. When I selected this, I could choose between XP and Server 2003, according to XP boot.ini file.Yesterday I got Windows 7 installed over XP. Everything seemed to be fine. I got back Grub booting with Super Grub. When I boot the computer I choose Windows booting, and now, Windows 7 menu is shown.
First options here were:
- Previous Windows version - Windows7
Firtst entry did not work: when you select it the computer just hungs up doing nothing, showing nothing, totally black.I installed EasyBCD and tried to edit boot menu: adding new entry to be autodetected or selecting the drive, but I get just absolutely nothing. When I choose this new entry to be loaded, same result: black screen.These are my curent booting settings:
Quote: There are a total of 3 entries listed in the bootloader.
Default: Windows 7 Timeout: 15 seconds Boot Drive: C:
i've got a server and. the problem is. i installed a new windows server 2003 and now im getting the error: BootMGR is Missing already tryed this cmd commands:
bootrec.exe /fixboot bootrec.exe /fixmbr
if i install a new windows its very fast with installing just takes like a minute its too fast, already tryed some things. but didnt fix it yet
spec's: (of Server) [HP Proliant ML 350] 3,5 gb ram. about 140gb HDD (Scsi)
I really need to get my Server 2003 running, as that is working platform (need it for my job).I had three operating systems in my computer: Ubunt, Win XP and Win Server 2003. Grub was the booting program, that offers you go to Windows loader. When I selected this, I could choose between XP and Server 2003, according to XP boot.ini file.Yesterday I got Windows 7 installed over XP. Everything seemed to be fine. I got back Grub booting with Super Grub. When I boot the computer I choose Windows booting, and now, Windows 7 menu is shown.First options here were:
- Previous Windows version
- Windows7
Firtst entry did not work: when you select it the computer just hungs up doing nothing, showing nothing, totally black.I installed EasyBCD and tried to edit boot menu: adding new entry to be autodetected or selecting the drive, but I get just absolutely nothing. When I choose this new entry to be loaded, same result: black screen.
It looks that Win 2003 server can only see Windows XP and Win 7 Ultimate. We like to buy some newer PC but don't want to pay for Business or Ultimate. Is there anyway that Home Premium can connect to Server 2003
Windows server 2003 reboots very often. On 30th Dec alone rebooted 10 times.Found only in Device manager for Display Adaptor its whowing in Yellow Mark for Intel Q965/Q963 Express Chipset Family. Is this could be any cause for reboot.Will drivers installations can resolve it?
When I try and copy files from my Windows 7 Home PC to my Windows Server 2003 share, it copies so much then hangs the Server sharing. It then appears that the share has disappeared.If I copy from the Server 2003 to 7, it copies fine, and copying from XP to 2003 also works fine.I had a chat with a colleague who told me that he has the same problem copying from Vista to XP.
I am having an issue with offline files created offline syncing back to the server. I have set up a network share to be available offline on a client computer. All files are available offline without issue. Here is the issue however. If I set the folder to work offline any file I create in the folder when it is offline just disappears when the folder comes back online, there are no conflicts or sync failures reported in sync center. If I create a new folder offline the folder does sync back to the server. Any changes made to an existing file are also replicated back to the server once the share is back online. So the issue is only with newly created files when the share is offline. I have not been able to replicate this error on any other file server in our environment, However I have recreated the issue with multiple shares with multiple Win 7 clients on this file server.
Steps taken so far. - Checked and reset permission levels on the share. - Recreated new shares from scratch for testing. - Disabled and enabled offline files on the client computer and cleared the offline cache. - Check various registry entry settings. - Disabled cashing on the File server. - Tested with XP the issue does not exist with XP.
The clients are running Windows 7 Enterprise 64 bit. The File server is Server 2003 Standard 32 bit with SP2.
how to do this on Windows Vista/Windows 7. Here's what I'm trying to accomplish. I want to stream some of my video files from a PC to my iPad. I can do this using a third party app that runs on my iPad that can connect to a computer via a WiFi network. I managed to do this quite easily on Windows XP and I can stream AVI files from the "C:Documents and SettingsAll UsersDocuments" folder. All I did is this -- I right-clicked on the Documents folder there and selected Properties, then Sharing tab and set "Share this folder on the network", named it and OK'ed it. After that I can easily see that folder from the app running on my iPad and stream files out of it.
Windows Vista and Windows 7 aren't as easy to set up and they don't have the same controls as Windows XP.
Upgraded my PC to a windows 7 64bit professional.However, I'm unable to read a xml file generated by accounting software (ACCPAC) stored in my windows NT 2003 server.Error message: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
I'm running a 2003 and 2008 server the 2003 is the primary DC. Most of our PC's are XP and were testing 2 windows 7 machines.
The desktops and some shared drives were stored on a nas box but it was unstable so I shifted the desktops and some public shares to a server on one of the DC's. I redirected the shares using netlogon scripts and they took fine on all computers XP and Windows 7, the desktops were redirected using Group policy, all the XP machines took the redirection, a few needed the users to be reset though. The issue I'm having is with the 2 windows 7 PC's, they have taken the shares but not the desktops. The desktops were working before. I have tried deleting the users and login in again, I have also tried to remove the regedit policies but no success. I have even taken the PC off the domain and put it back on with no success. The same users log in fine on the XP PC's and get the desktop.
I installed Win7 (at home) and when I try to configure Outlook 2003 to connect to the exchange server that our company uses. It cannot get access to this server. It says outlook must be online to access the exchange server.
All other internet access works perfectly. I've checked and rechecked all the settings. They are correct. It worked fine on VISTA. I did a Windows 7 Ultimate upgrade. Continues to work fine on my XP Pro station. Seems like something is blocking it from going out over the Internet.
I am using a VPN connection from my Android phone to my home PC by using the "default" Windows 7 (Ultimate x64) VPN feature. The connection works fine, but when I connect with my phone running Android 2.3.6 to this VPN, I loose the Internet connection on my phone and am only able to access the home LAN. Since the Android client doesn't have much settings to configure in this area, I figured the solution to my problem would be if the VPN server could share it's Internet connection to the VPN.
I have a computer on Windows 7- 64bits and my print server is on Windows 2003 Server 32bits. How can i install the driver of Windows 7-64 bits on my Windows Server 2003 print server?
I want to use it to share my laptop Internet access with my Blackberry. I want to get more infos before I check it out.P.s My laptop is running Windows 7, and I intends to use Virtual Hotspot to share Internet access from my Windows 7 laotop to my Blackberry.
I am testing some of our computers on our school system and got to the stage of joining it to our domain. They joined fine but the domain had never been connected to vista or windows 7 so it tried to upgrade itself. This crashed the server because it only had permission to change the sub domain.
At our office, we have a Windows 2003 File server (one of them), and Windows 7 workstations.The workstations can use Explorer fine to view all the folders on the share.But for whatever reason when you go to a command prompt and do a DIR on that share, it is missing about 60% of the folders.Now, the iphone app that uses the vpn to view these shares too also does not show them.
I recently upgraded from windows XP to 7. The problem is I can no longer connect to my shares on the server. Windows prompts me for a username and password and once I input this info, the same prompt shows up again.I have realised the domain it uses in the prompt (for username and password) is the same as the machine name and I have no field to input the domain manually.
I have my laptop connected to my router via Wifi, and my machine downstairs only has an ethernet port. If i connect my laptop downstairs can i share the wifi connection to my pc via a ethernet cable?
Ive foudn some posts and question about this before but none have worked. My laptop has Windows 7 Home Premium 64 bit and my machine has Windows 7 Ultimate 64 bit.
PS: I dont wana buy anything new as that machine wont be there forever, i just want a quick free temporary way of doing this.
I want to share files between two wifi .I have implemented an adhoc connectivity.One wifi is attached with my computer (runnng Windows 7) and other wifi is attached with my iphone3GS.
I have a hosted Linux server running CentOS 5 with Samba 3.4. Everything is setup and it is accessible via Linux machines by typing [URL] in a Firefox address bar. I am trying to set up a local network share on a Windows 7 Home Premium x64 SP1 computer. I have tried entering the IP address in 2 locations:1. Map Network drive. I select a drive letter and type in the ip \12.345.678.9 It asks for credentials and I enter the user info for the user I created on the Linux machine. It thinks a moment then pops back up asking for credentials. It doesn't say they are invalid, just never goes through.2. Connect to a website (under Map Network Drive). I type the IP [URL] and click connect and it pops up a dialog saying "The folder you entered does not appear to be valid. Please choose another".
I have tried creating a loopback adapter and trying to setup a connection via SSH using the guide found at [URL]. After completing the tutorial (substituting my server IP address for the destination address given) I try using the Run dialog as indicated and get a "Windows cannot connect to.." error and the diagnose connection button. One thing that may be causing problems there is that the loopback adapter is labeled as an unidentified network and thus stuck as a public connection, and I am unable to change it. Searching for solutions to that brings up things I can't access (no group policy editor on Home Premium) or results in no change (setting DHCP server, which I tried setting to my router).
I have a question about sharing my Internet. Ok my internet provider sends me some analogue signals, my modems gets them, converts them to digital signals and then, sends this Connection to where it should go (I mean I can use this connection using e.g. wifi). I have a vpn connection. I wanna use it on my mobile. My mobile doesn't support vpn configuration. So somehow I should send the vpn connection from my pc and modem. How can I share the internet I am using in my pc using my WiFi modem?
My problem is windows 7 hangs and freeze when access 2003 server Enterprise edition. This is not a small network, one of the biggest network.i have doubt on individual users on domain. before 2 months we had department wise users mean, for example Accounts@domainname.local. But after we created the individual users like john@domainname.local to all users. this is i believe the cause of problem. When we acess the server via the software it freezed for 5 seconds and then repeat to normal state. And after some time it hangs for 2 minutes.