Print Drivers For Windows 7 64bits On Windows Server 2003?
Dec 28, 2012
I have a computer on Windows 7- 64bits and my print server is on Windows 2003 Server 32bits. How can i install the driver of Windows 7-64 bits on my Windows Server 2003 print server?
View 2 Replies
ADVERTISEMENT
Oct 6, 2009
Is it possible to boot Windows Server 2003 from this VHD using Windows 7 VHD native support? If not, is it possible to create a bootable Windows Server 2003 VHD that dual boots with Windows 7?
View 1 Replies
View Related
Jun 3, 2011
When trying to copy a folder from Server 2003 to my Windows 7 64 bit it ends up freezing but I tried it on a xp computer nearby and the folder copied over in a minute.
View 2 Replies
View Related
May 15, 2011
I had three operating systems in my computer: Ubunt, Win XP and Win Server 2003. Grub was the booting program, that offers you go to Windows loader. When I selected this, I could choose between XP and Server 2003, according to XP boot.ini file.Yesterday I got Windows 7 installed over XP. Everything seemed to be fine. I got back Grub booting with Super Grub. When I boot the computer I choose Windows booting, and now, Windows 7 menu is shown.First options here were:
- Previous Windows version
- Windows7
Firtst entry did not work: when you select it the computer just hungs up doing nothing, showing nothing, totally black.I installed EasyBCD and tried to edit boot menu: adding new entry to be autodetected or selecting the drive, but I get just absolutely nothing. When I choose this new entry to be loaded, same result: black screen.These are my curent booting settings:There are a total of 3 entries listed in the bootloader.
Default: Windows 7
Timeout: 15 seconds
Boot Drive: C:
Entry #1
Name: Versi�n anterior de Windows
BCD ID: {ntldr}
[code]....
I tried also copying a regular boot.ini file (see below) into the Server 2003 partition, but all I got with this is, instead a black screen, a message saying that system in " NSTeasyldr1" cannot be loaded by some hardware/software error (no more options but to go back)
Code: [boot loader]
timeout=5
default=multi(0)disk(0)rdisk(0)partition(1)WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)WINDOWS="Windows Server 2003, Enterprise" /noexecute=optout /fastdetect As said, I am totally desperated with this, I really need my server 2003 getting launched
View 2 Replies
View Related
May 15, 2011
I had three operating systems in my computer: Ubunt, Win XP and Win Server 2003. Grub was the booting program, that offers you go to Windows loader. When I selected this, I could choose between XP and Server 2003, according to XP boot.ini file.Yesterday I got Windows 7 installed over XP. Everything seemed to be fine. I got back Grub booting with Super Grub. When I boot the computer I choose Windows booting, and now, Windows 7 menu is shown.
First options here were:
- Previous Windows version
- Windows7
Firtst entry did not work: when you select it the computer just hungs up doing nothing, showing nothing, totally black.I installed EasyBCD and tried to edit boot menu: adding new entry to be autodetected or selecting the drive, but I get just absolutely nothing. When I choose this new entry to be loaded, same result: black screen.These are my curent booting settings:
Quote: There are a total of 3 entries listed in the bootloader.
Default: Windows 7
Timeout: 15 seconds
Boot Drive: C:
[code]....
View 1 Replies
View Related
Aug 3, 2012
i've got a server and. the problem is. i installed a new windows server 2003 and now im getting the error: BootMGR is Missing already tryed this cmd commands:
bootrec.exe /fixboot
bootrec.exe /fixmbr
if i install a new windows its very fast with installing just takes like a minute its too fast, already tryed some things. but didnt fix it yet
spec's: (of Server) [HP Proliant ML 350]
3,5 gb ram.
about 140gb HDD (Scsi)
View 1 Replies
View Related
Sep 1, 2011
tell me the recommended or minimum specs for Windows Server 2003? This is for a Virtual PC by the way
View 2 Replies
View Related
May 15, 2011
I really need to get my Server 2003 running, as that is working platform (need it for my job).I had three operating systems in my computer: Ubunt, Win XP and Win Server 2003. Grub was the booting program, that offers you go to Windows loader. When I selected this, I could choose between XP and Server 2003, according to XP boot.ini file.Yesterday I got Windows 7 installed over XP. Everything seemed to be fine. I got back Grub booting with Super Grub. When I boot the computer I choose Windows booting, and now, Windows 7 menu is shown.First options here were:
- Previous Windows version
- Windows7
Firtst entry did not work: when you select it the computer just hungs up doing nothing, showing nothing, totally black.I installed EasyBCD and tried to edit boot menu: adding new entry to be autodetected or selecting the drive, but I get just absolutely nothing. When I choose this new entry to be loaded, same result: black screen.
View 5 Replies
View Related
Oct 11, 2011
It looks that Win 2003 server can only see Windows XP and Win 7 Ultimate. We like to buy some newer PC but don't want to pay for Business or Ultimate. Is there anyway that Home Premium can connect to Server 2003
View 1 Replies
View Related
Jan 2, 2012
Windows server 2003 reboots very often. On 30th Dec alone rebooted 10 times.Found only in Device manager for Display Adaptor its whowing in Yellow Mark for Intel Q965/Q963 Express Chipset Family. Is this could be any cause for reboot.Will drivers installations can resolve it?
View 2 Replies
View Related
Oct 5, 2011
I have a computer running Windows Server 2003 that i would like to connect to my computer running Windows 7 ultimate. i have done everything it says to in the videos and tutorials but i cannot get the server to connect to the internet. i can connect to it via remote desktop but it cannot connect to the internet nor can any other computers on my network see the server only the Windows 7 PC that the server is connected to. FYI - I have the win server 2003 connected to the Win 7 computer via Ethernet and i set up saring on the win 7 computer but it still cannot connect to the internet.
View 2 Replies
View Related
Apr 22, 2011
When I try and copy files from my Windows 7 Home PC to my Windows Server 2003 share, it copies so much then hangs the Server sharing. It then appears that the share has disappeared.If I copy from the Server 2003 to 7, it copies fine, and copying from XP to 2003 also works fine.I had a chat with a colleague who told me that he has the same problem copying from Vista to XP.
View 1 Replies
View Related
Sep 27, 2010
I'm unable to print in either Outlook 2003 or Internet Explorer with Windows 7. I've tried 3 different printers. Same problem. All other programs seem to print fine.
View 1 Replies
View Related
Jan 15, 2013
I am having an issue with offline files created offline syncing back to the server. I have set up a network share to be available offline on a client computer. All files are available offline without issue. Here is the issue however. If I set the folder to work offline any file I create in the folder when it is offline just disappears when the folder comes back online, there are no conflicts or sync failures reported in sync center. If I create a new folder offline the folder does sync back to the server. Any changes made to an existing file are also replicated back to the server once the share is back online. So the issue is only with newly created files when the share is offline. I have not been able to replicate this error on any other file server in our environment, However I have recreated the issue with multiple shares with multiple Win 7 clients on this file server.
Steps taken so far.
- Checked and reset permission levels on the share.
- Recreated new shares from scratch for testing.
- Disabled and enabled offline files on the client computer and cleared the offline cache.
- Check various registry entry settings.
- Disabled cashing on the File server.
- Tested with XP the issue does not exist with XP.
The clients are running Windows 7 Enterprise 64 bit. The File server is Server 2003 Standard 32 bit with SP2.
View 2 Replies
View Related
Mar 6, 2011
Are there any benefits of upgrading to 2008 if your only usage is streaming movies to a web server. Any pros / cons?
View 3 Replies
View Related
Jun 17, 2011
I have D-Link DPR1061 print server, but it does not work on my win7 64 bit PC.
View 1 Replies
View Related
Jan 19, 2012
Upgraded my PC to a windows 7 64bit professional.However, I'm unable to read a xml file generated by accounting software (ACCPAC) stored in my windows NT 2003 server.Error message: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
View 1 Replies
View Related
May 28, 2010
I tried to connect my Sharp AL-1641CS AIO into my computer with Windows 7 Home Premium edition, but windows couldn't recognize it. I then tried to search for a driver for it on line, but I had no luck at all. If you have knowledge on how to get that to work
View 2 Replies
View Related
Jan 21, 2012
I want to run a sharp al-1641-cs printer on Windows 7. I don't need the scanner part.
View 1 Replies
View Related
Jun 4, 2012
I have the printer sharp AL 1641 CS and need to install in my computer which is windows 7.
View 1 Replies
View Related
May 19, 2009
I am testing some of our computers on our school system and got to the stage of joining it to our domain. They joined fine but the domain had never been connected to vista or windows 7 so it tried to upgrade itself. This crashed the server because it only had permission to change the sub domain.
View 9 Replies
View Related
Jun 1, 2011
At our office, we have a Windows 2003 File server (one of them), and Windows 7 workstations.The workstations can use Explorer fine to view all the folders on the share.But for whatever reason when you go to a command prompt and do a DIR on that share, it is missing about 60% of the folders.Now, the iphone app that uses the vpn to view these shares too also does not show them.
View 5 Replies
View Related
Jul 11, 2011
how to connect win server 2003 to win 7 and vista
View 1 Replies
View Related
Sep 6, 2011
My problem is windows 7 hangs and freeze when access 2003 server Enterprise edition. This is not a small network, one of the biggest network.i have doubt on individual users on domain. before 2 months we had department wise users mean, for example Accounts@domainname.local. But after we created the individual users like john@domainname.local to all users. this is i believe the cause of problem. When we acess the server via the software it freezed for 5 seconds and then repeat to normal state. And after some time it hangs for 2 minutes.
View 5 Replies
View Related
May 24, 2011
I'm running a 2003 and 2008 server the 2003 is the primary DC. Most of our PC's are XP and were testing 2 windows 7 machines.
The desktops and some shared drives were stored on a nas box but it was unstable so I shifted the desktops and some public shares to a server on one of the DC's. I redirected the shares using netlogon scripts and they took fine on all computers XP and Windows 7, the desktops were redirected using Group policy, all the XP machines took the redirection, a few needed the users to be reset though. The issue I'm having is with the 2 windows 7 PC's, they have taken the shares but not the desktops. The desktops were working before. I have tried deleting the users and login in again, I have also tried to remove the regedit policies but no success. I have even taken the PC off the domain and put it back on with no success. The same users log in fine on the XP PC's and get the desktop.
View 9 Replies
View Related
Oct 28, 2009
I installed Win7 (at home) and when I try to configure Outlook 2003 to connect to the exchange server that our company uses. It cannot get access to this server. It says outlook must be online to access the exchange server.
All other internet access works perfectly. I've checked and rechecked all the settings. They are correct. It worked fine on VISTA. I did a Windows 7 Ultimate upgrade. Continues to work fine on my XP Pro station. Seems like something is blocking it from going out over the Internet.
View 2 Replies
View Related
Oct 9, 2009
Not a Windows 7 question, but I thought I would ask the question...
Anyone know if it's possible to convert an HP USB to RJ45 Print Server to a device that will allow an External USB drive to become a SAN?
I know they sell Routers and such that will do this, but I have an old USB to RJ45 print server around here and was just curious if it was possible.
View 0 Replies
View Related
Oct 19, 2011
how to know my print server ip address
View 1 Replies
View Related
Sep 25, 2012
I've been using various print drivers for various locations with success for a month with my new laptop. Today, all drivers gone.Loading new ones doesn't work. Print spooler is not "started;" it starts successfully, then is not "started" next time I look.Other possibly relevant information: HP 1020, HP MX 340 at home office.Tried: multiple restarts of print spooler, multiple reboots, troubleshooters, HP detect and download drivers?
View 5 Replies
View Related
Nov 10, 2009
I have a 64 bits Windows 7 notebook installed with Samsung SCX-4725 series PCL printer. For network printing requirements, I tried to install (I am not sure) a 32 bits ZOT Network Print Server which is being used other folks in the office. When I installed the print server, a error message prompted "Failed to add network Monitor". With this message, I still could install the print driver. But upon completion, couldn't print anything with a message "Error Print". Such error message did not appeared when I installed the system under a XP or Vista 32 bits enviornment.
I wish to know what is the problem(s) here? Is it ture that I need to install a 64 bits network print driver.
View 1 Replies
View Related
Jul 13, 2011
I'm having sporadic issues with many users connected over the network to a print server. If the printer is their default printer the application used to print will freeze/lockup until they log out / restart their machine. The only way to fix this (from my experience) is to set their default printer to something else (like Adobe PDF) or bypass the print server completely and do it by direct TCP/IP.
View 4 Replies
View Related