Windows 7, Windows 2003 Server, Some Shares Missing?
Jun 1, 2011
At our office, we have a Windows 2003 File server (one of them), and Windows 7 workstations.The workstations can use Explorer fine to view all the folders on the share.But for whatever reason when you go to a command prompt and do a DIR on that share, it is missing about 60% of the folders.Now, the iphone app that uses the vpn to view these shares too also does not show them.
View 5 Replies
ADVERTISEMENT
Aug 3, 2012
i've got a server and. the problem is. i installed a new windows server 2003 and now im getting the error: BootMGR is Missing already tryed this cmd commands:
bootrec.exe /fixboot
bootrec.exe /fixmbr
if i install a new windows its very fast with installing just takes like a minute its too fast, already tryed some things. but didnt fix it yet
spec's: (of Server) [HP Proliant ML 350]
3,5 gb ram.
about 140gb HDD (Scsi)
View 1 Replies
View Related
Oct 6, 2009
Is it possible to boot Windows Server 2003 from this VHD using Windows 7 VHD native support? If not, is it possible to create a bootable Windows Server 2003 VHD that dual boots with Windows 7?
View 1 Replies
View Related
Jun 3, 2011
When trying to copy a folder from Server 2003 to my Windows 7 64 bit it ends up freezing but I tried it on a xp computer nearby and the folder copied over in a minute.
View 2 Replies
View Related
May 15, 2011
I had three operating systems in my computer: Ubunt, Win XP and Win Server 2003. Grub was the booting program, that offers you go to Windows loader. When I selected this, I could choose between XP and Server 2003, according to XP boot.ini file.Yesterday I got Windows 7 installed over XP. Everything seemed to be fine. I got back Grub booting with Super Grub. When I boot the computer I choose Windows booting, and now, Windows 7 menu is shown.First options here were:
- Previous Windows version
- Windows7
Firtst entry did not work: when you select it the computer just hungs up doing nothing, showing nothing, totally black.I installed EasyBCD and tried to edit boot menu: adding new entry to be autodetected or selecting the drive, but I get just absolutely nothing. When I choose this new entry to be loaded, same result: black screen.These are my curent booting settings:There are a total of 3 entries listed in the bootloader.
Default: Windows 7
Timeout: 15 seconds
Boot Drive: C:
Entry #1
Name: Versi�n anterior de Windows
BCD ID: {ntldr}
[code]....
I tried also copying a regular boot.ini file (see below) into the Server 2003 partition, but all I got with this is, instead a black screen, a message saying that system in " NSTeasyldr1" cannot be loaded by some hardware/software error (no more options but to go back)
Code: [boot loader]
timeout=5
default=multi(0)disk(0)rdisk(0)partition(1)WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)WINDOWS="Windows Server 2003, Enterprise" /noexecute=optout /fastdetect As said, I am totally desperated with this, I really need my server 2003 getting launched
View 2 Replies
View Related
May 15, 2011
I had three operating systems in my computer: Ubunt, Win XP and Win Server 2003. Grub was the booting program, that offers you go to Windows loader. When I selected this, I could choose between XP and Server 2003, according to XP boot.ini file.Yesterday I got Windows 7 installed over XP. Everything seemed to be fine. I got back Grub booting with Super Grub. When I boot the computer I choose Windows booting, and now, Windows 7 menu is shown.
First options here were:
- Previous Windows version
- Windows7
Firtst entry did not work: when you select it the computer just hungs up doing nothing, showing nothing, totally black.I installed EasyBCD and tried to edit boot menu: adding new entry to be autodetected or selecting the drive, but I get just absolutely nothing. When I choose this new entry to be loaded, same result: black screen.These are my curent booting settings:
Quote: There are a total of 3 entries listed in the bootloader.
Default: Windows 7
Timeout: 15 seconds
Boot Drive: C:
[code]....
View 1 Replies
View Related
Sep 1, 2011
tell me the recommended or minimum specs for Windows Server 2003? This is for a Virtual PC by the way
View 2 Replies
View Related
May 15, 2011
I really need to get my Server 2003 running, as that is working platform (need it for my job).I had three operating systems in my computer: Ubunt, Win XP and Win Server 2003. Grub was the booting program, that offers you go to Windows loader. When I selected this, I could choose between XP and Server 2003, according to XP boot.ini file.Yesterday I got Windows 7 installed over XP. Everything seemed to be fine. I got back Grub booting with Super Grub. When I boot the computer I choose Windows booting, and now, Windows 7 menu is shown.First options here were:
- Previous Windows version
- Windows7
Firtst entry did not work: when you select it the computer just hungs up doing nothing, showing nothing, totally black.I installed EasyBCD and tried to edit boot menu: adding new entry to be autodetected or selecting the drive, but I get just absolutely nothing. When I choose this new entry to be loaded, same result: black screen.
View 5 Replies
View Related
Oct 11, 2011
It looks that Win 2003 server can only see Windows XP and Win 7 Ultimate. We like to buy some newer PC but don't want to pay for Business or Ultimate. Is there anyway that Home Premium can connect to Server 2003
View 1 Replies
View Related
Jan 2, 2012
Windows server 2003 reboots very often. On 30th Dec alone rebooted 10 times.Found only in Device manager for Display Adaptor its whowing in Yellow Mark for Intel Q965/Q963 Express Chipset Family. Is this could be any cause for reboot.Will drivers installations can resolve it?
View 2 Replies
View Related
Oct 5, 2011
I have a computer running Windows Server 2003 that i would like to connect to my computer running Windows 7 ultimate. i have done everything it says to in the videos and tutorials but i cannot get the server to connect to the internet. i can connect to it via remote desktop but it cannot connect to the internet nor can any other computers on my network see the server only the Windows 7 PC that the server is connected to. FYI - I have the win server 2003 connected to the Win 7 computer via Ethernet and i set up saring on the win 7 computer but it still cannot connect to the internet.
View 2 Replies
View Related
Apr 22, 2011
When I try and copy files from my Windows 7 Home PC to my Windows Server 2003 share, it copies so much then hangs the Server sharing. It then appears that the share has disappeared.If I copy from the Server 2003 to 7, it copies fine, and copying from XP to 2003 also works fine.I had a chat with a colleague who told me that he has the same problem copying from Vista to XP.
View 1 Replies
View Related
Jan 15, 2013
I am having an issue with offline files created offline syncing back to the server. I have set up a network share to be available offline on a client computer. All files are available offline without issue. Here is the issue however. If I set the folder to work offline any file I create in the folder when it is offline just disappears when the folder comes back online, there are no conflicts or sync failures reported in sync center. If I create a new folder offline the folder does sync back to the server. Any changes made to an existing file are also replicated back to the server once the share is back online. So the issue is only with newly created files when the share is offline. I have not been able to replicate this error on any other file server in our environment, However I have recreated the issue with multiple shares with multiple Win 7 clients on this file server.
Steps taken so far.
- Checked and reset permission levels on the share.
- Recreated new shares from scratch for testing.
- Disabled and enabled offline files on the client computer and cleared the offline cache.
- Check various registry entry settings.
- Disabled cashing on the File server.
- Tested with XP the issue does not exist with XP.
The clients are running Windows 7 Enterprise 64 bit. The File server is Server 2003 Standard 32 bit with SP2.
View 2 Replies
View Related
Mar 6, 2011
Are there any benefits of upgrading to 2008 if your only usage is streaming movies to a web server. Any pros / cons?
View 3 Replies
View Related
Dec 28, 2012
I have a computer on Windows 7- 64bits and my print server is on Windows 2003 Server 32bits. How can i install the driver of Windows 7-64 bits on my Windows Server 2003 print server?
View 2 Replies
View Related
Jan 19, 2012
Upgraded my PC to a windows 7 64bit professional.However, I'm unable to read a xml file generated by accounting software (ACCPAC) stored in my windows NT 2003 server.Error message: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
View 1 Replies
View Related
May 19, 2009
I am testing some of our computers on our school system and got to the stage of joining it to our domain. They joined fine but the domain had never been connected to vista or windows 7 so it tried to upgrade itself. This crashed the server because it only had permission to change the sub domain.
View 9 Replies
View Related
Jul 11, 2011
how to connect win server 2003 to win 7 and vista
View 1 Replies
View Related
Sep 6, 2011
My problem is windows 7 hangs and freeze when access 2003 server Enterprise edition. This is not a small network, one of the biggest network.i have doubt on individual users on domain. before 2 months we had department wise users mean, for example Accounts@domainname.local. But after we created the individual users like john@domainname.local to all users. this is i believe the cause of problem. When we acess the server via the software it freezed for 5 seconds and then repeat to normal state. And after some time it hangs for 2 minutes.
View 5 Replies
View Related
May 24, 2011
I'm running a 2003 and 2008 server the 2003 is the primary DC. Most of our PC's are XP and were testing 2 windows 7 machines.
The desktops and some shared drives were stored on a nas box but it was unstable so I shifted the desktops and some public shares to a server on one of the DC's. I redirected the shares using netlogon scripts and they took fine on all computers XP and Windows 7, the desktops were redirected using Group policy, all the XP machines took the redirection, a few needed the users to be reset though. The issue I'm having is with the 2 windows 7 PC's, they have taken the shares but not the desktops. The desktops were working before. I have tried deleting the users and login in again, I have also tried to remove the regedit policies but no success. I have even taken the PC off the domain and put it back on with no success. The same users log in fine on the XP PC's and get the desktop.
View 9 Replies
View Related
Oct 28, 2009
I installed Win7 (at home) and when I try to configure Outlook 2003 to connect to the exchange server that our company uses. It cannot get access to this server. It says outlook must be online to access the exchange server.
All other internet access works perfectly. I've checked and rechecked all the settings. They are correct. It worked fine on VISTA. I did a Windows 7 Ultimate upgrade. Continues to work fine on my XP Pro station. Seems like something is blocking it from going out over the Internet.
View 2 Replies
View Related
Jul 16, 2012
i have a 2006 acer laptop that just recently decided not to get onto the internet. it will connect to the network but no internet. i have looked at more forums than i can count but to no avail. i will try to list the problems/symptoms but i am not familiar with programming language and don't know exactly what all the command prompts are suppoed to achieve and the like.-isatap ipv6 adapter is not working (some people say it does'nt matter but???)-ip address starts with 169-ipconfig /release and release6 does not workbecause "an address has not yet been associated with the network endpoint"-ipconfig /flushdns does not work because "function failed during execution"-cannot displaydns because "dns cache is unavailable"-cannot registerdns because "rpc server is unavailable"-checked my services and found some dependant ones that i could not manually start ERROR1075: DNS client service, tcp/ip netbios helper, routing and remote access, internetconnection sharing (ics). all failed to start with the same error code 1075-ERROR 10022- netlogon service-tried "netsh int ip reset" but reset echo request failed. "access denied". i am the admin for this computer. it worked the first time i tried it with no errors. now i get the failed echo message.
-cannot setclassid "as know adapter is in a state permissable for this action"-i saw something about the dhcp-read on one forum that people were having trouble after deleting norton(symantc) programs. i have deleted norton programs and think i got all of them (how to be sure?)-netsh winsock reset successfully-tried regrepair, regseeker, and a few of those "free download" programs that say they will fix your problems after you register/purchase them. i figure if the computer can stop working so easily i can get it to start as easily. maybe that's naivety speaking.-i have scanned my cpu for viruses (naturally) with 3-4 different programs (maybe norton would have found something).clean-thought it might have something to do with the registery since i had a nasty virus everal months ago that i think changed it somehow.-of course my system restore points are dated after this problem occured.-i bought the computer at staples and it did not come with a windows startup disc.
i can't think of any more though i know i've tried more than is listed. the dns and rpc servers seem to be the main coulprits but how do i fix that? also possibly the norton issue? i've read so many forums i'm seeing triple and everyone seems to suggest the same things. i've tried them so many times (to no avail). i've even changed the network adapters ipv6 and ipv4 adresses to 208.67.222.222 with the alternate. nothing. there has to be something i'm overlooking but what
View 9 Replies
View Related
May 26, 2011
how to backup all printer definitions in a MSCS Cluster Server 2003 environment. The printers are integrated in the cluster. As long as he printers have not been in the cluster, we used printmig.exe, but this is not working in a cluster.
View 3 Replies
View Related
Mar 6, 2011
i had a big problem in accessing shares from windows 7 to win xp, so when i am trying to access Xp computer i got a box asking me to enter network password
View 1 Replies
View Related
Jun 3, 2012
i have 2 pc's both with windows 7 1 is 32 and the other is 63 bits..now i dont know how i did it but when i installed them i made it work so that pc 1 could acces a share on the 2nd pc..now yesterday 1st pc got a bsod. after i rebooted the share was gone and i could not acces the 2nd pc anymore.i been bussy one day to get it working again btu without luck.i just cant acces the 2nd pc anymore while when i ping it it has no problems , so it is seen on the network..i tried goin to homegroups but that just doesnt work , it says cant create a home group on this pc , after i type the pw.. i deleted home group and made the home group on the other pc and when i type pw on other pc it also says cant create homegroup on this pc .. so wherever i make a home group i cant acces it from the other pc ..my media center can conect to wherever the homegroup is made so that gives no problem for now .. its only these 2 pcs that cant connect to eachother .. its both windows 7 unlimited . the only difference is that 1 is 32 bit and other is 64 bits.. i even synced the time so far had to do manualy cause when i synced them both to internet clock (same timeserver) there was a 3 sec difference (strange but its synced now as far i can see.)
View 9 Replies
View Related
Sep 12, 2009
I have file and printer sharing enabled. I can access these shares from other windows 7 machines on the network, so I know the shares and permissions are correct. I have an active directory and I am logging onto the xp machines with the same account I always do, my own account which is a domain admin. The error I get when trying either \windows7machinename or windows7machinenamesharename iswindows7machinename is not accessible. you might not have permissions.the specified server cannot perform the requested operation.
View 9 Replies
View Related
Nov 23, 2011
I have an windows 7 on my network connected to a domain, and i have on the desktop links to a shared folders to one samba server (AIX). Time to time all links to that server are missing.Everything works fine, all the connections to that server are ok, but no links on desktop, i re-create the links and all works fine for a couple of time.
View 1 Replies
View Related
Mar 10, 2011
I have three Windows 7 computers, one a laptop and the other two are desktops. The laptop and one desktop are Win 7 Prof. and the remaining desktop is Win 7 Ultimate. All computers are part of my HomeGroup and share is set up for all default libraries, My Documents, My Pictures, My Music and My Videos. On the Win 7 desktop (let's call this computer 1) I had a 4 disk raid array partitioned as C: and D:. I had the system on C: and used D: for data. D: was beginning to be overpopulated. I tried several ways to shirk C: and then expand D: but ran into problems exacerbated by the raid array. So, I decided to copy everything on D: to C:, delete D: and then expand C: for the entire array. With the help of tutorials on this site, I have resolved all the problems this caused on computer 1 with the user folders and can now share everything through the HomeGroup in Win 7 Explorer on all three computers. However, eliminating drive D: on computer 1 and relocating My Documents, My Pictures, My Videos and Downloads have left the HomeGroup on both of the other computers with two orphaned shares. One named My Documents and the other downloads.
On computers 2 and 3 when I click on the shares in Win 7 Explorer, I get network error Windows cannot access \computer1downloads and Windows cannot access \computer1My Documents; Error code 0x80070043, The network name cannot be found. On computers 2 and 3 when I run net share in regular Win 7 I see an orphaned share on D: Share name D$; Resource D:, Remark Default share and what should be the current user share for C: Share Name C$; resource C: and remark Default Share. If I delete the D: share with net share, the share remains in the HomeGroup on computers 2 and 3. One method for resolving this involved using the net share command in safe mode with networking. I am unable to run that command in safe mode with networking due to a dependency error, code 1068 caused by the Security Accounts Manager that will not run in safe mode, error code 1084. On computers 2 and 3 I have looked inomputerHKEY_LOCAL_MACHINESystemCurrentControlSetservicesLanmanServerShares and see a share for a printer, one for pint$ print spooler, another for prnproc$ print spooler and finally Users with Path=C:Users. The latter is where I now have all of the shared files stored on C:UsersComputer1My Documents etc. That's a lot of information (I probably left something very important out but I tried to give you what I thought was material) and here is my question; how do I get rid of the two shares in the HomeGroups on computers 2 and 3 that show shares named My Documents and downloads????
View 5 Replies
View Related
Jul 10, 2009
What would cause 9 shares that I have on USB drives to disappear every time Windows 7 is rebooted? I have to recreate them every time. I did a test with another Windows 7 machine, using 1 USB share, and the first time I shared it with the 'Share with Specific People' adding Everyone to the list, and it disappeared upon reboot. I then did it through the Advanced Sharing in the Properties of the folder, rebooted and it actually remembered it. However doing it through the Advanced Sharing on the PC with 9 shares, it still didn't remember them after reboot. Why is there 2 different places to share anyway? I want to think 1 is for remote users and 1 is for local users, but then why don't they just say that, do they have to make it so confusing. It's totally not intuitive.
View 3 Replies
View Related
Mar 17, 2011
I have a laptop with Windows7 from work, registered to the domain from my company. At home I have a desktop with XP with shares on it. When I bring the laptop home and try to access the shares on the desktop, I am asked to enter user and pass (ok, I use the admin account on that desktop), the Seven shows me the list of shares. Very good, you might say. That is so until you try to enter the shares when it pops a "network error": "Windows cannot acess \xp-desktopshare1 You do no have permission to access \xp-desktopshare1. Contact your network administrator to request access." What access?! These are full shares for the admin account used to authenticate.
I have a third machine with Seven on it, this time a personal machine, not registered to a domain, and with this one I can properly access the shares mentioned earlier. Also, my laptop from work, can properly access shares from my work place and shares on the personal laptop with Seven on it. So this issue happens only when trying to access shares on XP at home.
View 5 Replies
View Related
Oct 12, 2011
I have tried to enable the $ shares on a windows 7 64 bit machine in a workgroup.i have tried the regedit that is suggested on the internet and added the Qword without success. Has anyone successfully done it?
View 7 Replies
View Related