i've got a server and. the problem is. i installed a new windows server 2003 and now im getting the error: BootMGR is Missing already tryed this cmd commands:
bootrec.exe /fixboot
bootrec.exe /fixmbr
if i install a new windows its very fast with installing just takes like a minute its too fast, already tryed some things. but didnt fix it yet
spec's: (of Server) [HP Proliant ML 350]
3,5 gb ram.
about 140gb HDD (Scsi)
At our office, we have a Windows 2003 File server (one of them), and Windows 7 workstations.The workstations can use Explorer fine to view all the folders on the share.But for whatever reason when you go to a command prompt and do a DIR on that share, it is missing about 60% of the folders.Now, the iphone app that uses the vpn to view these shares too also does not show them.
Is it possible to boot Windows Server 2003 from this VHD using Windows 7 VHD native support? If not, is it possible to create a bootable Windows Server 2003 VHD that dual boots with Windows 7?
When trying to copy a folder from Server 2003 to my Windows 7 64 bit it ends up freezing but I tried it on a xp computer nearby and the folder copied over in a minute.
I had three operating systems in my computer: Ubunt, Win XP and Win Server 2003. Grub was the booting program, that offers you go to Windows loader. When I selected this, I could choose between XP and Server 2003, according to XP boot.ini file.Yesterday I got Windows 7 installed over XP. Everything seemed to be fine. I got back Grub booting with Super Grub. When I boot the computer I choose Windows booting, and now, Windows 7 menu is shown.First options here were:
- Previous Windows version - Windows7
Firtst entry did not work: when you select it the computer just hungs up doing nothing, showing nothing, totally black.I installed EasyBCD and tried to edit boot menu: adding new entry to be autodetected or selecting the drive, but I get just absolutely nothing. When I choose this new entry to be loaded, same result: black screen.These are my curent booting settings:There are a total of 3 entries listed in the bootloader.
Default: Windows 7 Timeout: 15 seconds Boot Drive: C: Entry #1 Name: Versi�n anterior de Windows BCD ID: {ntldr}
[code]....
I tried also copying a regular boot.ini file (see below) into the Server 2003 partition, but all I got with this is, instead a black screen, a message saying that system in " NSTeasyldr1" cannot be loaded by some hardware/software error (no more options but to go back)
Code: [boot loader] timeout=5 default=multi(0)disk(0)rdisk(0)partition(1)WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)WINDOWS="Windows Server 2003, Enterprise" /noexecute=optout /fastdetect As said, I am totally desperated with this, I really need my server 2003 getting launched
I had three operating systems in my computer: Ubunt, Win XP and Win Server 2003. Grub was the booting program, that offers you go to Windows loader. When I selected this, I could choose between XP and Server 2003, according to XP boot.ini file.Yesterday I got Windows 7 installed over XP. Everything seemed to be fine. I got back Grub booting with Super Grub. When I boot the computer I choose Windows booting, and now, Windows 7 menu is shown.
First options here were:
- Previous Windows version - Windows7
Firtst entry did not work: when you select it the computer just hungs up doing nothing, showing nothing, totally black.I installed EasyBCD and tried to edit boot menu: adding new entry to be autodetected or selecting the drive, but I get just absolutely nothing. When I choose this new entry to be loaded, same result: black screen.These are my curent booting settings:
Quote: There are a total of 3 entries listed in the bootloader.
Default: Windows 7 Timeout: 15 seconds Boot Drive: C:
I really need to get my Server 2003 running, as that is working platform (need it for my job).I had three operating systems in my computer: Ubunt, Win XP and Win Server 2003. Grub was the booting program, that offers you go to Windows loader. When I selected this, I could choose between XP and Server 2003, according to XP boot.ini file.Yesterday I got Windows 7 installed over XP. Everything seemed to be fine. I got back Grub booting with Super Grub. When I boot the computer I choose Windows booting, and now, Windows 7 menu is shown.First options here were:
- Previous Windows version
- Windows7
Firtst entry did not work: when you select it the computer just hungs up doing nothing, showing nothing, totally black.I installed EasyBCD and tried to edit boot menu: adding new entry to be autodetected or selecting the drive, but I get just absolutely nothing. When I choose this new entry to be loaded, same result: black screen.
It looks that Win 2003 server can only see Windows XP and Win 7 Ultimate. We like to buy some newer PC but don't want to pay for Business or Ultimate. Is there anyway that Home Premium can connect to Server 2003
Windows server 2003 reboots very often. On 30th Dec alone rebooted 10 times.Found only in Device manager for Display Adaptor its whowing in Yellow Mark for Intel Q965/Q963 Express Chipset Family. Is this could be any cause for reboot.Will drivers installations can resolve it?
I have a computer running Windows Server 2003 that i would like to connect to my computer running Windows 7 ultimate. i have done everything it says to in the videos and tutorials but i cannot get the server to connect to the internet. i can connect to it via remote desktop but it cannot connect to the internet nor can any other computers on my network see the server only the Windows 7 PC that the server is connected to. FYI - I have the win server 2003 connected to the Win 7 computer via Ethernet and i set up saring on the win 7 computer but it still cannot connect to the internet.
When I try and copy files from my Windows 7 Home PC to my Windows Server 2003 share, it copies so much then hangs the Server sharing. It then appears that the share has disappeared.If I copy from the Server 2003 to 7, it copies fine, and copying from XP to 2003 also works fine.I had a chat with a colleague who told me that he has the same problem copying from Vista to XP.
I am having an issue with offline files created offline syncing back to the server. I have set up a network share to be available offline on a client computer. All files are available offline without issue. Here is the issue however. If I set the folder to work offline any file I create in the folder when it is offline just disappears when the folder comes back online, there are no conflicts or sync failures reported in sync center. If I create a new folder offline the folder does sync back to the server. Any changes made to an existing file are also replicated back to the server once the share is back online. So the issue is only with newly created files when the share is offline. I have not been able to replicate this error on any other file server in our environment, However I have recreated the issue with multiple shares with multiple Win 7 clients on this file server.
Steps taken so far. - Checked and reset permission levels on the share. - Recreated new shares from scratch for testing. - Disabled and enabled offline files on the client computer and cleared the offline cache. - Check various registry entry settings. - Disabled cashing on the File server. - Tested with XP the issue does not exist with XP.
The clients are running Windows 7 Enterprise 64 bit. The File server is Server 2003 Standard 32 bit with SP2.
I just got a computer for free, a Dell Studio 1555. When I got it, it would try to boot, then come to a screen that said that bootmgr.exe was missing. Sometimes I got a message that said something like mpio.sys was corrupted or missing. I have a Win 7 disk, so I put it in and tried to repair the installation. Each time I ran it, it said that the repair had failed. I tried to reinstall windows 7, and It made it to the first restart in the process. It showed the "Starting Windows" screen, but the colors of the windows logo never appeared, then I got the missing bootmgr screen. I decided to install Ubuntu and see if that worked, and it did (I installed it alongside the Windows installation). It was Ubuntu 10.04. I thought, "OK, so i'll just use this as a Linux machine"...and I decided to go back and reinstall so that I could use the entire hard drive. It never worked correctly again. Each subsequent time that I installed Ubuntu, I was told something along the lines of "Gnome Power Manager did not install correctly" and got a slow and choppy Ubuntu installation.Tried to install 11.10, and it failed completely. I opened the Ubuntu live from my usb drive, and opened the disk utility. I now cannot format, reformat, partition, or delete partitions on the drive. Is all of this just a case of a hard drive on its last legs, or is there something else going on here?
Upgraded my PC to a windows 7 64bit professional.However, I'm unable to read a xml file generated by accounting software (ACCPAC) stored in my windows NT 2003 server.Error message: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
I'm running a 2003 and 2008 server the 2003 is the primary DC. Most of our PC's are XP and were testing 2 windows 7 machines.
The desktops and some shared drives were stored on a nas box but it was unstable so I shifted the desktops and some public shares to a server on one of the DC's. I redirected the shares using netlogon scripts and they took fine on all computers XP and Windows 7, the desktops were redirected using Group policy, all the XP machines took the redirection, a few needed the users to be reset though. The issue I'm having is with the 2 windows 7 PC's, they have taken the shares but not the desktops. The desktops were working before. I have tried deleting the users and login in again, I have also tried to remove the regedit policies but no success. I have even taken the PC off the domain and put it back on with no success. The same users log in fine on the XP PC's and get the desktop.
I installed Win7 (at home) and when I try to configure Outlook 2003 to connect to the exchange server that our company uses. It cannot get access to this server. It says outlook must be online to access the exchange server.
All other internet access works perfectly. I've checked and rechecked all the settings. They are correct. It worked fine on VISTA. I did a Windows 7 Ultimate upgrade. Continues to work fine on my XP Pro station. Seems like something is blocking it from going out over the Internet.
I have a computer on Windows 7- 64bits and my print server is on Windows 2003 Server 32bits. How can i install the driver of Windows 7-64 bits on my Windows Server 2003 print server?
i have a 2006 acer laptop that just recently decided not to get onto the internet. it will connect to the network but no internet. i have looked at more forums than i can count but to no avail. i will try to list the problems/symptoms but i am not familiar with programming language and don't know exactly what all the command prompts are suppoed to achieve and the like.-isatap ipv6 adapter is not working (some people say it does'nt matter but???)-ip address starts with 169-ipconfig /release and release6 does not workbecause "an address has not yet been associated with the network endpoint"-ipconfig /flushdns does not work because "function failed during execution"-cannot displaydns because "dns cache is unavailable"-cannot registerdns because "rpc server is unavailable"-checked my services and found some dependant ones that i could not manually start ERROR1075: DNS client service, tcp/ip netbios helper, routing and remote access, internetconnection sharing (ics). all failed to start with the same error code 1075-ERROR 10022- netlogon service-tried "netsh int ip reset" but reset echo request failed. "access denied". i am the admin for this computer. it worked the first time i tried it with no errors. now i get the failed echo message.
-cannot setclassid "as know adapter is in a state permissable for this action"-i saw something about the dhcp-read on one forum that people were having trouble after deleting norton(symantc) programs. i have deleted norton programs and think i got all of them (how to be sure?)-netsh winsock reset successfully-tried regrepair, regseeker, and a few of those "free download" programs that say they will fix your problems after you register/purchase them. i figure if the computer can stop working so easily i can get it to start as easily. maybe that's naivety speaking.-i have scanned my cpu for viruses (naturally) with 3-4 different programs (maybe norton would have found something).clean-thought it might have something to do with the registery since i had a nasty virus everal months ago that i think changed it somehow.-of course my system restore points are dated after this problem occured.-i bought the computer at staples and it did not come with a windows startup disc.
i can't think of any more though i know i've tried more than is listed. the dns and rpc servers seem to be the main coulprits but how do i fix that? also possibly the norton issue? i've read so many forums i'm seeing triple and everyone seems to suggest the same things. i've tried them so many times (to no avail). i've even changed the network adapters ipv6 and ipv4 adresses to 208.67.222.222 with the alternate. nothing. there has to be something i'm overlooking but what
I am testing some of our computers on our school system and got to the stage of joining it to our domain. They joined fine but the domain had never been connected to vista or windows 7 so it tried to upgrade itself. This crashed the server because it only had permission to change the sub domain.
While installing Windows 7 on a fresh formatted disk, I am getting this msg all the time. The installation disk wont boot. I can't access anything. No repair... Nothing. I've tried also my old windows XP disk to get it to boot, but same error msg... BOOTMGR missing...
I have a HP Pavilion g series laptop running 64 bit Windows 7. My daughter for some reason was having problems and decided to reinstall the OS using cd's from a friend that I was unaware of. I ordered the System Recovery DVDs, which there are 2 along with another CD that says Application and Driver Recovery DVD. I've gone thru the installation process with the system recovery dvd's and continue to get BOOTMGR is Missing message. I can boot into the Advanced Boot Options using F8 but do not see a system repair option. I tried safe mode with command prompt and it just brings me back to the 'Welcome to Recovery Manager' from the DVD. So while in safe mode I tried re-installing again using the System Recovery DVD's. I get the same BOOTMGR is Missing message.
i have bought used pc, I found two 512mb sticks of ram so I threw them in there. Then I took my 3rd hdd (which was blank at one point in time and use solely for storage). Wiped everything from it then, using my main pc, installed windows 7 ultimate 32 bit. After the install was complete I was able to boot 7 off the third drive on my main pc. So I removed the drive changed it from slave to CS And connected it to the throw away pc. There is only one hdd and it has 7 installed on it. But when I turn on the pc it brings me to a black screen that says Missing BOOTMGR Pres CTRL, ALT, Delete to restart. So after checking some forums it says to insert the 7 recovery disk. When I do so it will bring me to a screen that says loading windows.. It will load fully then the screen flashes off then back on and it remains stuck on a black screen for as long as I will let it run. Would it be easier if I was to do this with xp? As the old pc is not so new technology.
My computer recently began to give me bsod and would not detect external devices, i.e. external hard drives, wireless adapters, and other usb devices. The issue windows gave me as the cause was that these devices did not have digital signatures. After online research and a trip to the geek squad, I determined that all of my hardware was in perfect working order. I tried to remove and re-install my copy of windows 7 64 bit ultimate but found that my disk was, despite being unscathed, unreadable and unusable.
I found several articles about creating a bootable USB drive with an ISO of the disk. I have the ISO on my laptop and have been trying to get my USB to operate on the desktop, which due to blue screens and automatic restarts gave me no recourse but to wipe it completely. As I stand now I have partitioned the USB drive as fat32 after doing a cmd prompt cleaning and have loaded the iso on using several different programs including the official Microsoft USB creator. All but one have produced the same error saying "error loading operating system" when booting from just the USB. The only program to produce a different result was YUMI which loaded a program that launches on start up and gives me the option to use the Windows 7 ISO but then produces another error saying "Error 27: Unrecognized Command"
Have I missed something in the formatting process or does the fact that the Windows USB creator re formats the USB as NTFS before every ISO upload mean that I cannot load my copy of Windows 7 this way?
I just purchased Dell Inspiron n4010 laptop without OS.. I am trying to install Windows 7 enterprise edition but every time i get the error
BOOTMGR IS MISSING Press CTRL.......
I have changed the default boot options to dvd from hard disk...but the error persists I also tried to install Windows XP but the installation halts at a blue screen saying that system is shutting down to avoid any loss...(Code 00X00....)
I then tried to install Free Dos that came alongwith the system but even that is also not installing and error is generated that many of the files are not located on the DVD...
Method 1: Message states a fix was made.Root cause found: The partition table does not have a valid System Partition.
Repair action: Partition table repair Result: Completed successfully. Error code = 0x0 However, problem persists after reboot. The wizard indicated that multiple reboots may be necessary, but the wizard does not restart after reboot.
Method 2: Attempted to use Bootrec.exe /FixMbrMessage: The operation completed successfully.
Attempted to use Bootrec.exe /FixBoot Message: Element not found. Attempted to use Bootrec.exe /RebuildBcd Message: Element not found.
Attempted to export and delete the BCD.The command bcdedit /export C:BCD_Backup returned:The store export operation has failed.The requested system device cannot be found.Method 3: When I attempt a system restore, it errors with: To use System Restore, you must specify which Windows installation to restore.When I view the System Recovery Options dialog box, no Windows installation drives are listed.In addition, when I view the C: drive in the DOS window (my Windows installation drive), that drive lists as empty.
I am trying to install Windows 7 on a laptop that previously had Vista that would not start. I deleted the partition and formatted the C:. Now when I place the Windows 7 disk in during the boot, it will start reading from it and then the below message will be displayed BOOTMGR is missining Press Ctrl+Alt+Del to restart?
I've also tried the command prompt trick on here to no avail either. Strangely, whenever the Windows CD is in my CD-ROM, it starts up fine and works. However, I will go to work and come back after having left it on and it will be back to the BOOTMGR is missing screen inevitably by the time I get back, so I don't know long it stays working with the windows 7 CD in. Would a clean re-install of windows 7 do it? I would prefer not to but it isn't out of the question. I am something of a computer novice, but as best as I can tell, I have a Corsair SSD with windows installed on it, and a separate regular old HDD from Seagate for storage of media.