i have bought used pc, I found two 512mb sticks of ram so I threw them in there. Then I took my 3rd hdd (which was blank at one point in time and use solely for storage). Wiped everything from it then, using my main pc, installed windows 7 ultimate 32 bit. After the install was complete I was able to boot 7 off the third drive on my main pc. So I removed the drive changed it from slave to CS And connected it to the throw away pc. There is only one hdd and it has 7 installed on it. But when I turn on the pc it brings me to a black screen that says Missing BOOTMGR Pres CTRL, ALT, Delete to restart. So after checking some forums it says to insert the 7 recovery disk. When I do so it will bring me to a screen that says loading windows.. It will load fully then the screen flashes off then back on and it remains stuck on a black screen for as long as I will let it run. Would it be easier if I was to do this with xp? As the old pc is not so new technology.
I just got a computer for free, a Dell Studio 1555. When I got it, it would try to boot, then come to a screen that said that bootmgr.exe was missing. Sometimes I got a message that said something like mpio.sys was corrupted or missing. I have a Win 7 disk, so I put it in and tried to repair the installation. Each time I ran it, it said that the repair had failed. I tried to reinstall windows 7, and It made it to the first restart in the process. It showed the "Starting Windows" screen, but the colors of the windows logo never appeared, then I got the missing bootmgr screen. I decided to install Ubuntu and see if that worked, and it did (I installed it alongside the Windows installation). It was Ubuntu 10.04. I thought, "OK, so i'll just use this as a Linux machine"...and I decided to go back and reinstall so that I could use the entire hard drive. It never worked correctly again. Each subsequent time that I installed Ubuntu, I was told something along the lines of "Gnome Power Manager did not install correctly" and got a slow and choppy Ubuntu installation.Tried to install 11.10, and it failed completely. I opened the Ubuntu live from my usb drive, and opened the disk utility. I now cannot format, reformat, partition, or delete partitions on the drive. Is all of this just a case of a hard drive on its last legs, or is there something else going on here?
While installing Windows 7 on a fresh formatted disk, I am getting this msg all the time. The installation disk wont boot. I can't access anything. No repair... Nothing. I've tried also my old windows XP disk to get it to boot, but same error msg... BOOTMGR missing...
I have a HP Pavilion g series laptop running 64 bit Windows 7. My daughter for some reason was having problems and decided to reinstall the OS using cd's from a friend that I was unaware of. I ordered the System Recovery DVDs, which there are 2 along with another CD that says Application and Driver Recovery DVD. I've gone thru the installation process with the system recovery dvd's and continue to get BOOTMGR is Missing message. I can boot into the Advanced Boot Options using F8 but do not see a system repair option. I tried safe mode with command prompt and it just brings me back to the 'Welcome to Recovery Manager' from the DVD. So while in safe mode I tried re-installing again using the System Recovery DVD's. I get the same BOOTMGR is Missing message.
My computer recently began to give me bsod and would not detect external devices, i.e. external hard drives, wireless adapters, and other usb devices. The issue windows gave me as the cause was that these devices did not have digital signatures. After online research and a trip to the geek squad, I determined that all of my hardware was in perfect working order. I tried to remove and re-install my copy of windows 7 64 bit ultimate but found that my disk was, despite being unscathed, unreadable and unusable.
I found several articles about creating a bootable USB drive with an ISO of the disk. I have the ISO on my laptop and have been trying to get my USB to operate on the desktop, which due to blue screens and automatic restarts gave me no recourse but to wipe it completely. As I stand now I have partitioned the USB drive as fat32 after doing a cmd prompt cleaning and have loaded the iso on using several different programs including the official Microsoft USB creator. All but one have produced the same error saying "error loading operating system" when booting from just the USB. The only program to produce a different result was YUMI which loaded a program that launches on start up and gives me the option to use the Windows 7 ISO but then produces another error saying "Error 27: Unrecognized Command"
Have I missed something in the formatting process or does the fact that the Windows USB creator re formats the USB as NTFS before every ISO upload mean that I cannot load my copy of Windows 7 this way?
I just purchased Dell Inspiron n4010 laptop without OS.. I am trying to install Windows 7 enterprise edition but every time i get the error
BOOTMGR IS MISSING Press CTRL.......
I have changed the default boot options to dvd from hard disk...but the error persists I also tried to install Windows XP but the installation halts at a blue screen saying that system is shutting down to avoid any loss...(Code 00X00....)
I then tried to install Free Dos that came alongwith the system but even that is also not installing and error is generated that many of the files are not located on the DVD...
Method 1: Message states a fix was made.Root cause found: The partition table does not have a valid System Partition.
Repair action: Partition table repair Result: Completed successfully. Error code = 0x0 However, problem persists after reboot. The wizard indicated that multiple reboots may be necessary, but the wizard does not restart after reboot.
Method 2: Attempted to use Bootrec.exe /FixMbrMessage: The operation completed successfully.
Attempted to use Bootrec.exe /FixBoot Message: Element not found. Attempted to use Bootrec.exe /RebuildBcd Message: Element not found.
Attempted to export and delete the BCD.The command bcdedit /export C:BCD_Backup returned:The store export operation has failed.The requested system device cannot be found.Method 3: When I attempt a system restore, it errors with: To use System Restore, you must specify which Windows installation to restore.When I view the System Recovery Options dialog box, no Windows installation drives are listed.In addition, when I view the C: drive in the DOS window (my Windows installation drive), that drive lists as empty.
I am trying to install Windows 7 on a laptop that previously had Vista that would not start. I deleted the partition and formatted the C:. Now when I place the Windows 7 disk in during the boot, it will start reading from it and then the below message will be displayed BOOTMGR is missining Press Ctrl+Alt+Del to restart?
I've also tried the command prompt trick on here to no avail either. Strangely, whenever the Windows CD is in my CD-ROM, it starts up fine and works. However, I will go to work and come back after having left it on and it will be back to the BOOTMGR is missing screen inevitably by the time I get back, so I don't know long it stays working with the windows 7 CD in. Would a clean re-install of windows 7 do it? I would prefer not to but it isn't out of the question. I am something of a computer novice, but as best as I can tell, I have a Corsair SSD with windows installed on it, and a separate regular old HDD from Seagate for storage of media.
Well I have been trying to fix this error for hours And after the system recovery scan it says there are problems with my start up options but I cant hit those buttons because the s2 keyboard I have in simply wont let me. Secondly I have ran the repair tool but it says I have to manually fix this problem so I tried using the command prompt but to my great luck again I cant get to that option because of my keyboard so I think the real question here is what do I have to do to my keyboard to land over all of the settings?
I have tried reinstalling my windows 7 onto my SSD and am having no luck. I believe I have went through most guides / troubleshooting I could find on this website as well as others. After attempting to use my original cd with no luck, I followed the steps only to have the cd go no further than 73% of the step after "copying windows files". I then burnt / mounted, whatever you'd like to call it (properly) my Win 7 to my Thumb drive and at first windows said BOOTGR is missing.
So than I read to put in the cd, repair it using a command prompt "bootrec /fixboot" which it replied successful. After which I reinserted the flash-drive only to get the same error. I have tried partitioning, "clean all" (not in that order), multiple cds, thumb drives, my friends window 7 cd for giggles to see if I would have any luck, removing a stick of ram, all usb items but the kb/m. Desperate after literally 8 hours of working on this I tried my old copy of windows xp which gave me a blue screen of sorts.
i cannot boot my Windows 7 64 bit Dell Studio 1558.Cannot boot to Windows.Error(s)BOOTMGR IS MISSING , CTRL + ALT + DEL TO RESTART. Description:
1. Initally had two partitions .. C and D .. 2. Tried to merge C and D to make C more by using Partiton Wizard. 3. Computer Restarted. 4.BSOD at Starting windows logo 5. Stuck at boot. 6. Launched Windows repair. 7. Unable to do repairs. 8. Dell restore unable to locate present installation. ( "current installation : (Unknown) at Unknown drive) 9. Checked partitions using DISKPART at command prompt. 10. Tried to change active partition . Restarted. 11. BOOTMGR MISSING ERROR. Dont even go to startup repair. 12. DVD DRIVE of LAPTOP NOT WORKING so made Windows Startup repair USB bootable. 13. Now have Access to Recovery Menu. 14. Made Partition Wizard Bootable USB . Now have access to Partition Wizard Also. 15. Tried installing Windows 7 using USB. Got error "installation error. verify windows sources are accessible Windows 7 Instalation Problem - Error Code 0xC0000005. 16. Stuck at boot now.
I checked OS drive in partition wizard bootable , it is intact..Windows installation is there....Every drive is ok but somehow booting not from that drive.I will attach photographs of Partition Wizard Partiton status.
i've got a server and. the problem is. i installed a new windows server 2003 and now im getting the error: BootMGR is Missing already tryed this cmd commands:
bootrec.exe /fixboot bootrec.exe /fixmbr
if i install a new windows its very fast with installing just takes like a minute its too fast, already tryed some things. but didnt fix it yet
spec's: (of Server) [HP Proliant ML 350] 3,5 gb ram. about 140gb HDD (Scsi)
I have been trying to troubleshoot my PC for a month now with no success when a standoff on my motherboard came loss and my motherboard shorted-out. I already warrentied my motherboard; no difference. Then I went and bought new RAM; also no difference. How do I get passed this stupid "bootmgr is missing" message. I have no existing OS on the drive.
So I attempted to install win 8 on a 4gb RAM laptop, setup wouldn't go through, it kept freezing on me. I decided to go back and stay on win 7. So windows is loading the files and TWICE, and it automatically reboots and goes over it again and command prompt comes and says BOOTMGR is missingPress Ctrl+Alt+Del to restart and the whole process goes all over again. I took out the harddrive and put it in my pc to see if I can get somewhere with it well, setup comes up properly I format the partition and I get a 0x80070570. From what I found, that's a virus I believe. The setup won't go through and BOOTMGR is missing again.
I just wanted to document my ordeal here for two reasons: 1.) in order to share my experience and 2.) beacause after 36+ hours of attempting to find a solution to my problem I could NOT find one and did a few things myself to remedy and fix the situation. This experience needs to be shared in case someone else goes through this and like me, NONE of the suggested fixes work.After a failed windows 7 install using an upgrade disc (clean install, no previous OS - this is possible with the right sequence of installation, google it). I continually recieved the error "Bootmgr is missing press ctrl+alt+delete+ to restart".There are many walkthroughs on the internet detailing how to remedy this problem BUT all of them are assuming Windows has been successfully installed and that you can repair it using the install disc and clicking "repair" when putting it into the disc drive and loading it before booting. My problem of course was that the OS was not successfully installed, therefore I had no way to access the repair options.I removed the hard drive and put it into a working PC and it was detected; reformatted the drive, scanned it using Western Digital's (it's a WD Caviar Blue 500gb) software to check for drive health as I assumed the drive was bad. The drive was reformatted successfully and the long test revealed no issues, the drive was healthy. I put it back into the new rig, checked cables, replaced sata cords, powered on and "Bootmgr is missing press ctrl+alt+delete+ to restart"
Went into BIOS and made sure boot order was correct - it was.Used a piece of software meant to fix bootmgr issues (url...) - no luck.I went ahead and performed memtest86+ 4.21 and detected tens of thousands of errors in the ram. This narrowed it down. I replaced the ram with ram I know has no errors and booted up. "Bootmgr is missing press ctrl+alt+delete+ to restart".This is when I realized that it must be connected to the bad install and that before tossing this PC out of the window of a moving car, I should wipe the drive completely and start over, as something on the drive must be corrupted, despite the reformat and health of the drive. Using DBAN Boot and Nuke (http://www.dban.org/download) I wiped the drive completely (took 10 hours or so). I prayed this would solve my problems and guess what: IT DID! At this point after restarting after Boot and Nuke and putting in the upgrade disc and went forward with my installation NO "Bootmgr is missing press ctrl+alt+delete+ to restart" and the install went perfectly.
I can't boot my windows 7 after creating a partition E and activated it, to install windows 8. It asks me to press any key to start from dvd and when I do that, I am prompted to press ctrl +alt+delete to restart but nothing happens and the screen freezes. In other words, I can just access the bios.Afer many trials to boot from dvd or usb or hard disk ,the computer is somehow dead. The pc is running an intel Dual Core on a gigabyte "GA-EP41-UDL3".
I've had a problem with my computer booting up ever since I did a clean reformat.Whenever I turn on my computer, it goes to the black screen and says the default, "Bootmgr is missing, press ctrl alt delete to restart, blah blah blah".The only way to get it to work is I have to press F12, and select my HDD and pressenter twice. It then successfully loads and such and does fine from that point on.Problem is, it's kind of annoying and I want to rid of it.I'm currently at work, but when I get home I'll be more than happy to take some screenshots and stuff if th
I have had number of errors, the latest being 'Error number: 0x80070017' when trying to install windows 7. I'll start from the top. Originally I had problems exactly the same as on this thread below, incl same model PC except with Vista, also USB mouse often freezes or stops working: [URL]. I ignored the problem until crash during online streaming (assumed problem was to do with graphics card), usual multi coloured horizontal lines on monitor, repeating sound. Manual push button shutdown.
On restart, black screen no boot activity. Recovery DVD doesn't work/ don't have all the discs. So I bought Win 7 upgrade instead. Now I have a combination of 'BOOTMGR is missing', and when that doesn't occur PC freezes on any screen you can think of. Sometimes I can get all the way to 'expanding files' when installing Win 7, then I get Error number: 0x80070017. I have tried copying DVD to USB drive (in case it's a dvd drive speed problem), but then cannot copy the whole DVD usually there's an error stopping me (on another pc).
Also no OS available to select during repair system selection on Win 7 upgrade/install screens. Finally error regarding 'USB drive unplugged during boot' or something to that effect, also tells me DVD or CD or hard drive might no be connected properly. Had that message twice, again locks up. I've checked inside, every thing connected.
So to summarise: Bootmgr missing (on boot) Error number: 0x80070017 (on Win 7 install) No OS available to select (System repair) Constant freezing
i have a Acer Aspire 5755g-6841 laptop, and yesterday i started getting this message. "bootmgr is missing" after i tried to do a system restore. The attempt at the system restore ended bad with it not finishing and me having to reboot my laptop. It was stuck at 99% completion for 5hrs. Now when i use 2 different restore discs that i made for windows 7 64-bit from a downloaded iso, i get stuck in the recovery options menu with the blue loop never ending and no OS being loaded to be selected. Also anytime i try to use the eRecovery from pressing ALT+F10 it gets the blue loop there and never loads.
I can't access my bios and get msg missing bootmgr enter ctrl alt delete to restart, I can't use my win 7 disk or any other disk to fix this because my computer won't read it, and I can't get into the bios to reset the boot priority. I can't use a zip drive cause the computer won't read that either. All I seem to be able to do is hit ctrl, alt, del. but why do that is it doesn't boot my rig. when I put the drive into my second computer, windows is there, and the boot manager is there too. I want to use this computer for a folding contest on May 15.
i tryed reinstalling windows 7 and now when i turn it on no matter what sorces i use (usb or cd/dvd) it wont load the windows 7 disk to repair or install im stopped at BOOTMGR is missing press ctrl+alt+del to restart i pressed f2 to make it boot from cd and usb first and pressed f12 to try and boot directly but nether work?
I bought a new dell inspiron15R-2106SLV and when i am doing some changes in disk management i found error like Bootmgr is missing Press CTRL+ALT+DEL to restart I am unable to use my lappy as its not going into OS side..
I have my brothers laptop and the laptop is sitting at BOOTMGR is missing, I can get into BIOS. It will not see recovery disk and will not go into safe mode!!!
It is set to boot from CD Rom but does not see the recovery disc. Is there anything that I can do? As I am now stuck
My husband's comp crashed...he had Win7 Os. Recovery did not work! I tried to reintall Win7 got as far as formatting the hard drive. I then reinserted the cd to reinstall and now all I get as far as "Press any key..." I press a key and "BOOTMGR MISSING" press ctrl + alt + del to restart. Of course this doesn't work.I have reset the bios so that cd-rom is the only bootable device. It will not move from the bootmgr missing screen. The cd is a legal bootable copy, the hard drive and dvd player work I have tried them in another comp.System Configuration[CODE]
I'm currently stuck on this issue, while trying to solve another computer problem (as addressed in thread:I guess I botched it somewhere and I just get the bootmgr is missing message. [CODE]
Her computer is an HP laptop it is runnung windows 7 . I have created the recovery disk( 32 bit) from online as that is what most sites said to do. After it said it was loading the windows files I clicked next. Then it said system recovery options.In the box it says (recovered) 292135 MB (d Local Disk. It is checked on use recovery tool taht can help fix problems starting windows. I click next. I get a pop up that says this version of system recovery options is not compatible with the version of windows you are trying to repair,So then I made the 64 bit recovery disk & restarted. I was unsure if it was 64 bit or 32 bit to start.
First off, why is reinstalling windows 7 such a pita? I've done it several times and it's soooooooo bad. With that aside, tonight I was attempting to reinstall 64 bit from 32 bit. I reformatted my hd using dos because advanced recovery simple does not work. After formatting and restarting I'm getting te bootmgr error. After reading countless threads with fixes nothing is helping. I CANNOT get past this error. I have the disc in, it won't go past the error. Pushing f2, f8, and f12 does not work. I can't do anything in the bios. Most of the solutions simply assume you can get PAST the error.
The next step I tried was unplugging the hd I formatted and installing to a different hd. This gives me an error of missing a device required. At this point I have no idea what to do besides maybe reformatting the hd again using another pc. Is there a recovery program I should dl to a blank cd?
i make the partition as active by going to computer managment-> disk management got this popup message, Only make a partition as active if it contains a functioning operating system. If the partition lacks an operating system. marking it active might cause your computer to stop working. Do you want to continue?
I have a very big problem with my reinstall of Windows 7 Pro. I have now lost the bootmgr and am not able to "see" my SSD. Ouch! I searched the forum for my error: 0x800704f and couldn't find it nor could I get to see my SSD and am therefore not able to use the tutorial to "get it back." Well, I am at a loss at this point. I was originally trying a fresh install of Windows 7 pro. But, just prior, I got an error box that the Catalyst Control Center was not working properly(or something like that). But, when after all my efforts seemed to take me further down the rabbit hole. I concluded that I must post this thread!I built it myself and know just enough to make me dangerous!
