Upgraded my PC to a windows 7 64bit professional.However, I'm unable to read a xml file generated by accounting software (ACCPAC) stored in my windows NT 2003 server.Error message: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
View 1 RepliesIs it possible to boot Windows Server 2003 from this VHD using Windows 7 VHD native support? If not, is it possible to create a bootable Windows Server 2003 VHD that dual boots with Windows 7?
View 1 Replies View RelatedWhen trying to copy a folder from Server 2003 to my Windows 7 64 bit it ends up freezing but I tried it on a xp computer nearby and the folder copied over in a minute.
View 2 Replies View RelatedI had three operating systems in my computer: Ubunt, Win XP and Win Server 2003. Grub was the booting program, that offers you go to Windows loader. When I selected this, I could choose between XP and Server 2003, according to XP boot.ini file.Yesterday I got Windows 7 installed over XP. Everything seemed to be fine. I got back Grub booting with Super Grub. When I boot the computer I choose Windows booting, and now, Windows 7 menu is shown.First options here were:
- Previous Windows version
- Windows7
Firtst entry did not work: when you select it the computer just hungs up doing nothing, showing nothing, totally black.I installed EasyBCD and tried to edit boot menu: adding new entry to be autodetected or selecting the drive, but I get just absolutely nothing. When I choose this new entry to be loaded, same result: black screen.These are my curent booting settings:There are a total of 3 entries listed in the bootloader.
Default: Windows 7
Timeout: 15 seconds
Boot Drive: C:
Entry #1
Name: Versi�n anterior de Windows
BCD ID: {ntldr}
[code]....
I tried also copying a regular boot.ini file (see below) into the Server 2003 partition, but all I got with this is, instead a black screen, a message saying that system in " NSTeasyldr1" cannot be loaded by some hardware/software error (no more options but to go back)
Code: [boot loader]
timeout=5
default=multi(0)disk(0)rdisk(0)partition(1)WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)WINDOWS="Windows Server 2003, Enterprise" /noexecute=optout /fastdetect As said, I am totally desperated with this, I really need my server 2003 getting launched
I had three operating systems in my computer: Ubunt, Win XP and Win Server 2003. Grub was the booting program, that offers you go to Windows loader. When I selected this, I could choose between XP and Server 2003, according to XP boot.ini file.Yesterday I got Windows 7 installed over XP. Everything seemed to be fine. I got back Grub booting with Super Grub. When I boot the computer I choose Windows booting, and now, Windows 7 menu is shown.
First options here were:
- Previous Windows version
- Windows7
Firtst entry did not work: when you select it the computer just hungs up doing nothing, showing nothing, totally black.I installed EasyBCD and tried to edit boot menu: adding new entry to be autodetected or selecting the drive, but I get just absolutely nothing. When I choose this new entry to be loaded, same result: black screen.These are my curent booting settings:
Quote: There are a total of 3 entries listed in the bootloader.
Default: Windows 7
Timeout: 15 seconds
Boot Drive: C:
[code]....
i've got a server and. the problem is. i installed a new windows server 2003 and now im getting the error: BootMGR is Missing already tryed this cmd commands:
bootrec.exe /fixboot
bootrec.exe /fixmbr
if i install a new windows its very fast with installing just takes like a minute its too fast, already tryed some things. but didnt fix it yet
spec's: (of Server) [HP Proliant ML 350]
3,5 gb ram.
about 140gb HDD (Scsi)
tell me the recommended or minimum specs for Windows Server 2003? This is for a Virtual PC by the way
View 2 Replies View RelatedI really need to get my Server 2003 running, as that is working platform (need it for my job).I had three operating systems in my computer: Ubunt, Win XP and Win Server 2003. Grub was the booting program, that offers you go to Windows loader. When I selected this, I could choose between XP and Server 2003, according to XP boot.ini file.Yesterday I got Windows 7 installed over XP. Everything seemed to be fine. I got back Grub booting with Super Grub. When I boot the computer I choose Windows booting, and now, Windows 7 menu is shown.First options here were:
- Previous Windows version
- Windows7
Firtst entry did not work: when you select it the computer just hungs up doing nothing, showing nothing, totally black.I installed EasyBCD and tried to edit boot menu: adding new entry to be autodetected or selecting the drive, but I get just absolutely nothing. When I choose this new entry to be loaded, same result: black screen.
It looks that Win 2003 server can only see Windows XP and Win 7 Ultimate. We like to buy some newer PC but don't want to pay for Business or Ultimate. Is there anyway that Home Premium can connect to Server 2003
View 1 Replies View RelatedWindows server 2003 reboots very often. On 30th Dec alone rebooted 10 times.Found only in Device manager for Display Adaptor its whowing in Yellow Mark for Intel Q965/Q963 Express Chipset Family. Is this could be any cause for reboot.Will drivers installations can resolve it?
View 2 Replies View RelatedI have a computer running Windows Server 2003 that i would like to connect to my computer running Windows 7 ultimate. i have done everything it says to in the videos and tutorials but i cannot get the server to connect to the internet. i can connect to it via remote desktop but it cannot connect to the internet nor can any other computers on my network see the server only the Windows 7 PC that the server is connected to. FYI - I have the win server 2003 connected to the Win 7 computer via Ethernet and i set up saring on the win 7 computer but it still cannot connect to the internet.
View 2 Replies View RelatedWhen I try and copy files from my Windows 7 Home PC to my Windows Server 2003 share, it copies so much then hangs the Server sharing. It then appears that the share has disappeared.If I copy from the Server 2003 to 7, it copies fine, and copying from XP to 2003 also works fine.I had a chat with a colleague who told me that he has the same problem copying from Vista to XP.
View 1 Replies View RelatedI am having an issue with offline files created offline syncing back to the server. I have set up a network share to be available offline on a client computer. All files are available offline without issue. Here is the issue however. If I set the folder to work offline any file I create in the folder when it is offline just disappears when the folder comes back online, there are no conflicts or sync failures reported in sync center. If I create a new folder offline the folder does sync back to the server. Any changes made to an existing file are also replicated back to the server once the share is back online. So the issue is only with newly created files when the share is offline. I have not been able to replicate this error on any other file server in our environment, However I have recreated the issue with multiple shares with multiple Win 7 clients on this file server.
Steps taken so far.
- Checked and reset permission levels on the share.
- Recreated new shares from scratch for testing.
- Disabled and enabled offline files on the client computer and cleared the offline cache.
- Check various registry entry settings.
- Disabled cashing on the File server.
- Tested with XP the issue does not exist with XP.
The clients are running Windows 7 Enterprise 64 bit. The File server is Server 2003 Standard 32 bit with SP2.
Are there any benefits of upgrading to 2008 if your only usage is streaming movies to a web server. Any pros / cons?
View 3 Replies View RelatedWindows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt local profile. If this problem persists, contact your network administrator.
View 1 Replies View RelatedI'm running a 2003 and 2008 server the 2003 is the primary DC. Most of our PC's are XP and were testing 2 windows 7 machines.
The desktops and some shared drives were stored on a nas box but it was unstable so I shifted the desktops and some public shares to a server on one of the DC's. I redirected the shares using netlogon scripts and they took fine on all computers XP and Windows 7, the desktops were redirected using Group policy, all the XP machines took the redirection, a few needed the users to be reset though. The issue I'm having is with the 2 windows 7 PC's, they have taken the shares but not the desktops. The desktops were working before. I have tried deleting the users and login in again, I have also tried to remove the regedit policies but no success. I have even taken the PC off the domain and put it back on with no success. The same users log in fine on the XP PC's and get the desktop.
I installed Win7 (at home) and when I try to configure Outlook 2003 to connect to the exchange server that our company uses. It cannot get access to this server. It says outlook must be online to access the exchange server.
All other internet access works perfectly. I've checked and rechecked all the settings. They are correct. It worked fine on VISTA. I did a Windows 7 Ultimate upgrade. Continues to work fine on my XP Pro station. Seems like something is blocking it from going out over the Internet.
why is my user file stored in TEMP instead of the name of the user account?
View 2 Replies View RelatedI have a computer on Windows 7- 64bits and my print server is on Windows 2003 Server 32bits. How can i install the driver of Windows 7-64 bits on my Windows Server 2003 print server?
View 2 Replies View RelatedI am testing some of our computers on our school system and got to the stage of joining it to our domain. They joined fine but the domain had never been connected to vista or windows 7 so it tried to upgrade itself. This crashed the server because it only had permission to change the sub domain.
View 9 Replies View RelatedAt our office, we have a Windows 2003 File server (one of them), and Windows 7 workstations.The workstations can use Explorer fine to view all the folders on the share.But for whatever reason when you go to a command prompt and do a DIR on that share, it is missing about 60% of the folders.Now, the iphone app that uses the vpn to view these shares too also does not show them.
View 5 Replies View Relatedhow to connect win server 2003 to win 7 and vista
View 1 Replies View RelatedMy problem is windows 7 hangs and freeze when access 2003 server Enterprise edition. This is not a small network, one of the biggest network.i have doubt on individual users on domain. before 2 months we had department wise users mean, for example Accounts@domainname.local. But after we created the individual users like john@domainname.local to all users. this is i believe the cause of problem. When we acess the server via the software it freezed for 5 seconds and then repeat to normal state. And after some time it hangs for 2 minutes.
View 5 Replies View RelatedThere is only one of my Excel 2003 files that almost disappears when I copy it over into my Windows 7 laptop and try to read it with either explorer or search for it, although it asks me to replace it everytime. It appears as if it doesn't exist. However when I open Excel 2010 and list only the .xls files, it finds it and I can read it. I have several other Excel 2003 files that are fine and since I usually open files by clicking on them in explorer, this one is particularly annoying, since I can't find it to click on it to open it. When I do open it in Excel 2010 it works normally and fine.
why only this file disappears from explorer and the search function only?
sporadic (4 out of 10) issues with saving files. Opens file from the network (AD) drive adds data which takes about 10 min. then saves the file. The save appears to be successful then user closes file and gets file permissions erro Yes or No to save file to another location or change name. They save it to another location. The original file disappears from the network drive.
View 1 Replies View RelatedMy battery went dead while I was using Peachtree Accounting. Now when I try to run Peachtree, it won't let me open the program, because it thinks I am already using it. I have uninstalled the program, and re-installed it, but it still thinks I am running the program.
View 2 Replies View Relatedhow to backup all printer definitions in a MSCS Cluster Server 2003 environment. The printers are integrated in the cluster. As long as he printers have not been in the cluster, we used printmig.exe, but this is not working in a cluster.
View 3 Replies View RelatedMy mousepointer blinking and shows green spinning circle, this happens when I move mousepoint over desktop or task bar. I opened Task Manager and noticed hundreds explorer.exe processes are running, however only one Windows Explorer icon is displayed in the Task Bar.I guess that some program is always trying to start another instance of Windows Explorer. How can I trace it? How can I find a program (or a service, event, etc) which causing clogging of my computer?
View 1 Replies View RelatedNot a fan of the Office 2007/2010/2013 ribbon so I continue using 2003. Beginning a few days ago about half the time when I save a file what happens is that a second file is created with the same name and "- Conflict 1.xxx" is appended to the file name. It is happening in both Word and Excel.
View 1 Replies View RelatedI used to have XP as my O/S and scanned a lot of files. The scanned files have an extension .max
Since I switched to Windows 7 I cannot read ( open ) them anymore.Searching Google provided no What I am looking for is a program that let's me read the .max files.
I have an EXCEL 2003 s/s setup in WIN 7. This contains data in 4/5 columns consisting of details of expenses incurred by two people who jointly own a boat and wish to share the costs equally. I have achieved this for the year 2011 and would like to create an identical s/s for 2012. Due to the fact that I am not familiar with EXCEL , I would like to start the new s/s with the same column setup , totals formulae and the header setup as I have already obtained for the year just ended without the hassle of setting up the same settings again. Would it be possible to just copy the 2011 s/s to the Clipboard and then paste it into my Excel App thus duplicating everything which I could then amend by deleting the old data before filling in the 2012 data? Will this work ?
View 2 Replies View Related