How To Know Ip Address Of Print Server
Oct 19, 2011how to know my print server ip address
View 1 Replieshow to know my print server ip address
View 1 RepliesMy internet isn't working too well, it shows great signal strength and says its connected but won't let me access the internet. It works if I reset the router but I keep having to do this as it only works for a limited amount of time sometimes for 5 minutes sometimes for 5 seconds. I keep getting this message when I try to access the internet:Error 105 (net::ERR_NAME_NOT_RESOLVED): Unable to resolve the server's DNS address.
View 1 Replies View RelatedNot a Windows 7 question, but I thought I would ask the question...
Anyone know if it's possible to convert an HP USB to RJ45 Print Server to a device that will allow an External USB drive to become a SAN?
I know they sell Routers and such that will do this, but I have an old USB to RJ45 print server around here and was just curious if it was possible.
I have D-Link DPR1061 print server, but it does not work on my win7 64 bit PC.
View 1 Replies View RelatedI have a 64 bits Windows 7 notebook installed with Samsung SCX-4725 series PCL printer. For network printing requirements, I tried to install (I am not sure) a 32 bits ZOT Network Print Server which is being used other folks in the office. When I installed the print server, a error message prompted "Failed to add network Monitor". With this message, I still could install the print driver. But upon completion, couldn't print anything with a message "Error Print". Such error message did not appeared when I installed the system under a XP or Vista 32 bits enviornment.
I wish to know what is the problem(s) here? Is it ture that I need to install a 64 bits network print driver.
Last Friday my main desktop crashed (lost power to the machine) and on restarting the PC was unable to "identify" the network. By identify, I mean, when using "Network and Sharing Centre" on the basic network information page, the PC shows "Identifying" under "active networks" - no matter how long I leave the PC.
PC details
Model: Packard Bell Power x-30
Processor i7 870 @2.93GHz
RAM: 8GB
O/S: Windows 7 Home Premium (64-bit)
Modem Router details
Netgear N300 Wireless Dual Band ADSL2+ Modem Router
The main desktop is connected to the modem router (via Ethernet). The modem router is showing no sign of any problems itself, all the dashboard lights look ok (i.e. power is on, port 1 shows the Ethernet connection in place, both wireless bands are lit, the DSL is lit and so is the internet). The household contains a number of laptops which continue to work ok wirelessly and/or wired through Ethernet. Even mobile phones are accessing the wi-fi ok.
The DNS Server address looks ok, as that is the address of the web page to the router. I cannot access that web page (address) via the main desktop, but I can from other devices ok. Having gone through Device Manager the Realtek PCIe GBE Family Controller is showing as "working properly". I have tried pinging the DNS Server address, and that fail. I have gone through a system restore to a previous point (before the day of the crash) but that seems to have made no difference either.
I have attempted to set the IP addresses (for TCP/IPv4) directly
IP address 192.168.0.3
Subnet mask: 255.255.255.0
Default Gateway: 192.168.0.1
And therefore forced to set the DNS Server address too
Preferred DNS server: 192.68.0.1
But I don't know what to set for the alternate DNS Server, so left blank. This seems to step me forward, in that the device/network is now identified. However the internet access is still not work, as the "DNS Server is not responding".
I'm having sporadic issues with many users connected over the network to a print server. If the printer is their default printer the application used to print will freeze/lockup until they log out / restart their machine. The only way to fix this (from my experience) is to set their default printer to something else (like Adobe PDF) or bypass the print server completely and do it by direct TCP/IP.
View 4 Replies View RelatedI have a computer on Windows 7- 64bits and my print server is on Windows 2003 Server 32bits. How can i install the driver of Windows 7-64 bits on my Windows Server 2003 print server?
View 2 Replies View RelatedMy internet connection shows 'no internet access' even though my ISP shows the connection is coming into the house just fine. I usually use a router (NetGear-WNR3500U) but I right now I have the Ethernet connection plugged directly into my PC. I tried directly plugging into my laptop and the internet works just fine. So I know the problem resides in the PC.
Some troubleshooting things I have tried.
-Power cycled my modem, router and PC.
-Repinged my connection from my ISP(Comcast Xfinity)
-Used the reset option on the router and the modem
-I was walked through the internet options needed with the tech support from my ISP to make sure DHCP was enabled and every other setting was correct, and he cleared me that all settings were correct.
-Tried ipconfig commands to /renew and /release my IP When I tried ipconfig /renew I get the error 'An error occurred while renewing interface Local Area Connection : unable to contact your DHCP server'
-Restored my PC to a restore point where the Internet was working
All of these options did not work.
What I think the problem is and I am not sure how to fix it, when I run the ipconfig /all command my Auto configuration IPv4 Address shows 169.254.112.76 which I was told is a router IP address even though I am plugged directly from the modem to my PC with an Ethernet cord. So I think that's my problem? But I am not sure.
I've been using various print drivers for various locations with success for a month with my new laptop. Today, all drivers gone.Loading new ones doesn't work. Print spooler is not "started;" it starts successfully, then is not "started" next time I look.Other possibly relevant information: HP 1020, HP MX 340 at home office.Tried: multiple restarts of print spooler, multiple reboots, troubleshooters, HP detect and download drivers?
View 5 Replies View Related(Windows 7 Home Premium 64-bit, HP LaserJet CP1215)When printing from Word (or any other normal application) the documents just sit in the print queue with Status = "Error - Printing".If I stop, then re-start the Print Spooler service, they then print.Strangely enough, this does not happen if I print from the HP printer diagnostic utility.I've done complete re-install of the entire printer driver suite and I'm pretty sure everything that end is OK. So what's happening with the spooler? The error message isn't exactly very revealing
View 9 Replies View RelatedMy HP 6500 all in one will print test pages but will not print from my computer. It worked fine up until a week ago?
View 2 Replies View RelatedI'm on Windows 7 and have run into the annoyance of my PrtScn key actually bringing up the print dialog box to print. It still copies the screen to the clipboard for a paste into paint, but I can't figure out why it's bringing up the dialog to print or how to turn that off. I have seen it before maybe 8 years ago on Windows XP but do not remember what was done to correct it. When I try to search, I just find posts about it not working or how to turn the whole screen capture function off for the PrtScn button.
View 4 Replies View RelatedHaving problems exporting my comcast address book to windows live mail address book,Also tyied exporting address book from plaxo without success, please help!
View 1 Replies View RelatedI am trying to set up a home server with filezilla server. I am following this site's tutorial to help secure the data flow: [URL]. After doing all of this, I get an error saying "Invalid IP address/range/mask".
View 7 Replies View RelatedHave been a LONG LONG user of Linux as a server (hosting VM's XP / Windows 7 mix) and file / print sharing.
I used to avoid MS like the plague as far as SERVER environments are concerned - probably because my first experince was Windows NT (Windows NeanderThal or Windows No Thanks) which was SO HORRIBLE that it put me off Windows servers for ages.
(Note I'm using a server in a HOME environment where we have around 8 machines (most of which are actually mine for testing -- not a corporate environment which has other considerations).
The problem now with the latest Linux distros that they are trying to be "A Better Windows than Windows". You can of course customize them but I haven't got the time or patience to do this any more. To select what packages to install / leave out now is a 100% pain and if you do it wrong the chances are the system will give errors.
I've looked at the new SUSE 11.2 -- slick and polished - bit I don't NEED "an alternative Windows".
I've just been looking at Windows Server 2008 R2 (got it from Technet) and I'm REALLY IMPRESSED with it so far. I've installed the STANDARD version - you don't need datacenter or Enterprise version for a home server.
It runs vmware server on it just fine (although I might go the whole hog and use the Hyper-V virtualisation -- need to do a bit more research).
I'm quite happy letting MS do the updates than having to mess around with Kernel compiles etc.
Incidentally as a HOME server there are some considerations that you might want to do to make it more like a Desktop OS than a pure server for example add multi-media to it.
This guy does a great job at this .
Convert your Windows Server 2008 R2 to a Workstation! - Multiboot Installation
Windows 7 VM's run just fine on W2008 server (they should as there is a lot of common code).
i want to change mac address and ip address on acer apire win 7
View 4 Replies View Relatedi have a 2006 acer laptop that just recently decided not to get onto the internet. it will connect to the network but no internet. i have looked at more forums than i can count but to no avail. i will try to list the problems/symptoms but i am not familiar with programming language and don't know exactly what all the command prompts are suppoed to achieve and the like.-isatap ipv6 adapter is not working (some people say it does'nt matter but???)-ip address starts with 169-ipconfig /release and release6 does not workbecause "an address has not yet been associated with the network endpoint"-ipconfig /flushdns does not work because "function failed during execution"-cannot displaydns because "dns cache is unavailable"-cannot registerdns because "rpc server is unavailable"-checked my services and found some dependant ones that i could not manually start ERROR1075: DNS client service, tcp/ip netbios helper, routing and remote access, internetconnection sharing (ics). all failed to start with the same error code 1075-ERROR 10022- netlogon service-tried "netsh int ip reset" but reset echo request failed. "access denied". i am the admin for this computer. it worked the first time i tried it with no errors. now i get the failed echo message.
-cannot setclassid "as know adapter is in a state permissable for this action"-i saw something about the dhcp-read on one forum that people were having trouble after deleting norton(symantc) programs. i have deleted norton programs and think i got all of them (how to be sure?)-netsh winsock reset successfully-tried regrepair, regseeker, and a few of those "free download" programs that say they will fix your problems after you register/purchase them. i figure if the computer can stop working so easily i can get it to start as easily. maybe that's naivety speaking.-i have scanned my cpu for viruses (naturally) with 3-4 different programs (maybe norton would have found something).clean-thought it might have something to do with the registery since i had a nasty virus everal months ago that i think changed it somehow.-of course my system restore points are dated after this problem occured.-i bought the computer at staples and it did not come with a windows startup disc.
i can't think of any more though i know i've tried more than is listed. the dns and rpc servers seem to be the main coulprits but how do i fix that? also possibly the norton issue? i've read so many forums i'm seeing triple and everyone seems to suggest the same things. i've tried them so many times (to no avail). i've even changed the network adapters ipv6 and ipv4 adresses to 208.67.222.222 with the alternate. nothing. there has to be something i'm overlooking but what
I am using windows 7 64bit in compaq presario CQ61. today i go to cmd and type ipconfig but i can't see my ip adress. insted of showing ip it shows my media state disconnected. i send a picture sample of this.
View 7 Replies View RelatedI am trying to obtain the ip adderess on a computer. When I go to run type cmd and ipconfig it is giving me media disconnected. I tried typing in ipconfig/all and it gave me media disconnected and said the physical address is 00-24-E8-24-47-40. I don't know what this means or what I need to do. I am trying to get this computer to work on my wireless network but can't.
View 3 Replies View RelatedI'm looking for a scrollable top links for Chrome.In other words the links just below the address bar so I can place more links and scroll to view them all.I feel like Browsers are going to be a window with tabs and all of us saying "where are our bookmarks?" "Where are our extensions?", "Where is the address bar?" followed by everyone installing older browsers and telling Chrome and FireFox to rethink the browser again because you gone over the deep end.
View 1 Replies View Relatedfind detail of 9694780323
View 4 Replies View RelatedI'd like to set the IPv4 Address of a VMware workstation to the following listed below:
VMware Workstation
IPv4 Address: 10.10.10.100
Subnet: 255.255.255.0
Host
IPv4 Address: 192.168.1.101
Subnet Mask: 255.255.255.0
How would I go about implementing the change of the IPv4 Address without changing the LAN.
I have a laptop and netbook on the same home network. A message on the laptop tells me:Windows has detected an IP address conflict. Another computer on this network has the same IP address as this computer.
View 2 Replies View RelatedMay I know about of IP Address culture. In our computer, The IP Address was always change. I am using at the same place many month ago. But the IP Address was always change.
View 3 Replies View RelatedIf I use live mail can I keep my present address??? I noticed that hot mail is the parent to live mail...is there any way I can keep my present address??
Right now my provider is road runner...I can operate my present email from them using my present email address, because that is where my pop/smtp servers are!
I am not that savvy when it comes to internet techniques involving mail..I am just doing what I know..
I have a d-link router "DIR 825 " I come out of my brighthouse modem to the router and go across the room to a netgear switch. I have one computer that won't find a ip address when coming out of the netgear switch. I have to run straight from the D-link router to the pc to get on line. The other PC works fine coming out of the switch. Is there something I can check to get the one pc to recognize the IP address when coming out of the netgear switch
View 2 Replies View RelatedI really want to change my ip address. Not the ipv4 one, but the actual one e.g. the one when i go to [URL].I am Running Virgin Media Broadband, and recently got a brand new Hub [URL] along with a new ip and i was told that it is "dynamic". But if i reboot it etc it still stays the same? what can i do to change it? im on Windows 7... and im on a laptop with wireless.
View 5 Replies View RelatedI have 3 Win 7 computers in LAN (simple lan) with 192.168.1.5 / 6 / 8 ip address given to them. Default gateway set to 192.168.1.1 ( ip of my broadband modem).
Many times when my pcs are restarted , the IP address fields are turned blank and the option " Obtain IP address automatically" gets selected..
what should i do to keep the ip settings permanent ?
i am using adsl and i want to change my modem mac address my modem : alfex
View 5 Replies View RelatedI have a d-link router "DIR 825 " I come out of my bright-house modem to the router and go across the room to a netgear switch. I have one computer that won't find a ip address when coming out of the netgear switch. I have to run straight from the D-link router to the pc to get on line. The other PC works fine coming out of the switch. Is there something I can check to get the one pc to recognize the IP address when coming out of the netgear switch?
View 2 Replies View Related