I have a question about sharing my Internet. Ok my internet provider sends me some analogue signals, my modems gets them, converts them to digital signals and then, sends this Connection to where it should go (I mean I can use this connection using e.g. wifi). I have a vpn connection. I wanna use it on my mobile. My mobile doesn't support vpn configuration. So somehow I should send the vpn connection from my pc and modem. How can I share the internet I am using in my pc using my WiFi modem?
Just bought this belkin router. Linked one computer through LAN and 4 devices through WIFI or some reason my WIFI devices are not able to read or detect connections to the LAN network
I have a desktop computer connected to a wireless modem through an ethernet cable. My laptop is connected to the modem using wifi. Is there any way to connect the two computersThis my network map:
i am using a USB modem for networking, but i want to connect my cell to the internet using this modem via WiFi. How can i setup up a WiFi connection in my house using this USB modem?
I'm trying to achieve something which I think most might not have tried,starting with what I have
1.Type 2 adsl2+ cpe/iad modem-It has built in wifi. 2.A fiber internet connection. 3.A samsung smart tv with built in lan adapter (40 inch LED-no wifi but wifi ready)
Now the modem which I have mentioned above cannot be used with the fiber internet connection.So,it is just lying waste but I want to use my internet connection provided by my ISP through fiber connection with the modem so that I can use my modem's wifi and lan ports.What I have done was connected my laptop to my modem's wifi and also to my ISP's fiber connection so my laptop is connected to both the networks and now I have tried to establish a bridge connection between the lan connection and the wifi connection I was successful and I was also able to share my internet connection(as shown in my laptop) but when I have checked for the wifi internet connection it is not there(Checked on my mobile-one x and ipad).So is there any way so that I can do this...??Please don't suggest me to use a application like connectify or virtual router to share my fiber internet connection.Now there is a another thing that i have mentioned above my Samsung tv now I have connected one of my modem's lan connection to my tv and tried to use the all share application(my laptop is connected to the same modem through wifi) in my laptop I have found my tv and the laptop connected to the modem(Control PanelNetwork and InternetNetwork Map)but my tv is not at all recognizing my laptop and my laptop is also not finding my tv(in the allshare application).If my first problem of getting my internet to the modem's wifi is possible then I also want to try that for the modem's lan connection so that I can avoid the pain of buying a samsung wifi dongle which costs more than 10% of my tv's price.
i am pradhap, i am using a mobile that contains wifi. it performs wifi wireless n/w and a modem. so how to access wifi connection form my mobile to windows7
I have my laptop connected to my router via Wifi, and my machine downstairs only has an ethernet port. If i connect my laptop downstairs can i share the wifi connection to my pc via a ethernet cable?
Ive foudn some posts and question about this before but none have worked. My laptop has Windows 7 Home Premium 64 bit and my machine has Windows 7 Ultimate 64 bit.
PS: I dont wana buy anything new as that machine wont be there forever, i just want a quick free temporary way of doing this.
I want to share files between two wifi .I have implemented an adhoc connectivity.One wifi is attached with my computer (runnng Windows 7) and other wifi is attached with my iphone3GS.
how to do this on Windows Vista/Windows 7. Here's what I'm trying to accomplish. I want to stream some of my video files from a PC to my iPad. I can do this using a third party app that runs on my iPad that can connect to a computer via a WiFi network. I managed to do this quite easily on Windows XP and I can stream AVI files from the "C:Documents and SettingsAll UsersDocuments" folder. All I did is this -- I right-clicked on the Documents folder there and selected Properties, then Sharing tab and set "Share this folder on the network", named it and OK'ed it. After that I can easily see that folder from the app running on my iPad and stream files out of it.
Windows Vista and Windows 7 aren't as easy to set up and they don't have the same controls as Windows XP.
I have an XP pro x32 machine on wireless with shared folders, a 7 Ultimate x64 machine (fresh install) on wireless, and Linksys Wireless/wired router (I'll get the model number later, can't remember). I've had the shares on xp set up for a long time and never had an issue with them on XP or Vista machines. The two machines are on the same router, same subnet, same workgroup (home), individually assigned IPs, and can access the outside fine. 7 does not have a "share group" set up. Whenever I access a shared folder from the 7 machine it connects fine until I start to transfer files. It will make it anywhere from a few seconds to a couple of minutes before the wireless connections on both machines are dropped. The connection problems only happen when copying shared files; I can browse shared folders or internet all I want.Side note that may or may not have any bearing: I had been having an issue where the wireless adapter didn't exist (device manager or anywhere else) after coming back from sleep. That required me to reboot to see it again. I fixed it by disabling the save power feature on the driver and disabling sleep mode.
On Windows XP my USB dongle would always share it's wifi connection with my home WRT-54G WiFi Router.It was simple and all it took was a little wizard to set it up and give my router an IP address from my computer.In windows 7 I cant find out how to do it.the internet sharing option doesn't work correctly. it's not giving my router an IP address.
I have a computer running Windows Server 2003 that i would like to connect to my computer running Windows 7 ultimate. i have done everything it says to in the videos and tutorials but i cannot get the server to connect to the internet. i can connect to it via remote desktop but it cannot connect to the internet nor can any other computers on my network see the server only the Windows 7 PC that the server is connected to. FYI - I have the win server 2003 connected to the Win 7 computer via Ethernet and i set up saring on the win 7 computer but it still cannot connect to the internet.
I have - A Laptop with Windows 7 UltimateA Linksys Wireless Router with ports which are all Ethernet ports (i.e. no USB ports).A Tata Photon Plus (which is basically a Wireless USB Modem)I have been trying to setup a wireless network to have my handheld devices connect to the internet.I have - Connected the Ethernet port of my laptop to one of the Ethernet Ports of my Wireless Router.I have connected my Wireless USB Modem to my laptop (as my Router does not have a USM port).My Questions While I have been able to setup the Wireless Network, the Network shows "No Internet Access". Can someone help me with how to bring in Internet to the Wireless Network? I am sorry but I don't have enough networking acumen which would enable me to do this without assistance.
I want to use it to share my laptop Internet access with my Blackberry. I want to get more infos before I check it out.P.s My laptop is running Windows 7, and I intends to use Virtual Hotspot to share Internet access from my Windows 7 laotop to my Blackberry.
A few days ago i was trying to connect my laptop to my ps3.To do this i was changing setting etc but never got it to work anyway.The next day i turn the computer on and can't connect to the internet.I think it was something to do with dns.I uninstalled and reinstalled my usb modem and software and always get full connection bars and says its connected, but in the bottom right hand corner it says network "no internet access" with a yellow triangle over it.It was because i was changing all of the settings in network and sharing senter, but being the wally i am, never wrote down the original settings. Whatever i did i am fairly certain i did it in the change adapter settings.
The problem with Windows 7 and an USB 3G modem is that everytime I use it it creates a new connection, and next time I plug the modem in it will be like "Internett Modem Connection 11" and in the connection list I got many of them, how can I prevent this issue? And can I delete some of them by any chance?
In order to change my password a service provider had to reset my modem.I can go on the internet with my desktop, but I am having difficulties going on the internet with my laptop. It seems that my wireless router has to be reset also but he can't do it because it's not one of theirs. He did explain to me though that I have to put the I.P. address into the browser in order to get on the router's brand name and so on, which I did but I don't know what to do next. My router's I.P. address is 192.168.0.1 It is a NEXXT Nebula 150?
how to connect 2 compute .1 is laptop and the other is desktop using bsnl broad band modem type 1 which have 4 port plus 1 usb port . so that both the computer has networking and internet connection.
My high speed modem locks-up frequently and I have to reboot the modem and computer. The modem was checked out and it's okay. Is there something in windows7 or my computer harware that could be doing this?
I've just bought a new router-modem (lynksys x2000) to replace my old modem.After going through the setup(by using quick install guide CD-ROM provide with router-modem), i've got no internet connection. My laptop can connect to the router-modem but not the internet.Do my new modem have its own firewall?(I know my laptop firewall is running). Do i need to disable the firewall? If yes, which one should i disable, my laptop of modem.
I have an Acer Aspire 5740G and for some reason it hasn't allowed me to install my new wireless internet usb stick. I have an older usb stick already installed that I use, but it won't let me install this new one which works fine on my PC.
When I plug in the usb stick it makes that beep beep noise to indicate it detects the device but when I go into my computer the device pops up and then suddenly disappears.
I have my new HP eprint printer installed on my PC however when I plug the usb cable into my laptop after installing the CD it won't connect. This is during the setup when it says "connect usb cable" or whatever - but NOTHING HAPPENS!
I am using Internet Modem USB Stick with my computer. My computer is Windows 7 Professional. I have a problem with removing the Internet Modem USB Stick from the computer. When I insert the Internet Modem USB Stick into my computer and then I wish to remove it, I really can't do so. I, however, can remove the Internet Modem USB Stick from the computer easily in Windows XP.I think it will reduce my Internet Modem USB Stick Lifetime and there probably should effect my computer lifetime if I try to remove the USB Stick without allowing to reject.
basically I've just moved house and the internet isn't working. We have a modem that's connected to a pc with an Ethernet n there is a laptop co-nected wireless. Connections between comp n modems are good but modem to internet isnt. When loading ie or Chrome a message comes up 105 unable to resolve the servers dns.
just built a computer installed Win 7 Home Prem 64 on it.Booted, loaded drivers, updated drivers w/usb key and laptop.Slow (4 to 5 kb/s dl) internet speed. Did some messing around, had it at normal speeds after messing around (windows updates installed).Hooked up to my Siemens 567, will not connect to internet.Hooked up to my DIR-655 router, will connect at slow speed.Home is brand new, CAT6 Wired, previous Vista machine worked flawless on this Cat6 jack. Wifi works on laptop just fine. (also vista).Bought a network card, same situation so that rules out my computer hardware and leaves the OS and Router/Modem.I am pretty darn good at computers but this is making me lose sleep and is turning me into a bad fiance.
whenever i try to view video on Internet or any flash my windows 7 machine disconnects the huawei modem (even with updated drivers and firmware) and thus also the internet access. non-video internet works fine. the very same modem don't disconnect during video-viewing when installed on another machine! what to do?
my newly built pc only connects to the internet when directly connected to the modem. when connected to the Linksys WRT54G, the internet does not work and there are no status lights on the ethernet port on my computer. however all other computers and devices, wired and wireless, all work with the router. my new computer is the only one that doesnt work with the router.
1. reset the router and the modem
2. updated all drivers
3. checked to make sure the cable is good and the port on the router is good (they're both good, i use this ethernet cord and router port for my xbox and it works fine.)
4. DNS and DHCP are enabled
5. i've worked on this crap for 3 days now so ive done a lot more trouble shooting than this, i just cant remember everything.
internet connecting thru modem but unable to access web page dns - error, I have a Internet connection by the Lan provider, If I connect thru his connection it works but If I connect thru Data Card - In network section I find that there is no "internet connection". But the modem showing the connection. If I try to open any webpage it gives DNS error or web page not reachabl
i want to know how to share internet in windows 7 ultimate through adhoc. i'm able to create an adhoc connection and connect but there is no internet connectivity. what do i do to have internet connectivity on other pcs?