Belkin Share Wireless Modem Router WiFi And LAN Not Linked?
Dec 12, 2011
Just bought this belkin router. Linked one computer through LAN and 4 devices through WIFI or some reason my WIFI devices are not able to read or detect connections to the LAN network
I own a Belkin Wireless G Modem/Router. I connect my computer to it via Realtek RTL8139/810x wired network adapter.
Just a moment ago, my computer could not connect to the Internet. When I ran the troubleshooting tool, it suggested to "Make sure the other end of the cable is plugged into the router. If that does not help, try a new cable."
I checked the LED light on the network card, and it appears to be solid red. I'm not too sure about its usual colour when it was working fine. The modem's LED shows that it detected a connection from the cable. I tried to replace the cable with another one, but it the light is still red and the modem still shows that it detects a connection from the cable, but my windows is not able to connect to the modem. It failed to detect any connection.
I am currently using a D-link wireless USB adapter to connect to the modem.
Can anyone tell me what is wrong? Is there a problem with my settings or is the network card damaged?
I have a question about sharing my Internet. Ok my internet provider sends me some analogue signals, my modems gets them, converts them to digital signals and then, sends this Connection to where it should go (I mean I can use this connection using e.g. wifi). I have a vpn connection. I wanna use it on my mobile. My mobile doesn't support vpn configuration. So somehow I should send the vpn connection from my pc and modem. How can I share the internet I am using in my pc using my WiFi modem?
My new Belkin Wireless G router crashes ALWAYS if I try to connect from my Windows 7 Laptop to my Windows XP (home edition) desktop.I try to connect wireless from my Laptop (Windows 7) to my shared printer and shared folders on my wired Windows XP desktop.While entering \192.168.2.3 in my IExplorer of the Windows 7 Laptop: (IP address of XP desktop) immidiately crashes the router and disconnects both computers from the internet. Only solution is to reboot the router.Have tested this various time, but always the same result. Both computers have the same WORKGROUP name.
On Windows XP my USB dongle would always share it's wifi connection with my home WRT-54G WiFi Router.It was simple and all it took was a little wizard to set it up and give my router an IP address from my computer.In windows 7 I cant find out how to do it.the internet sharing option doesn't work correctly. it's not giving my router an IP address.
Desktop connected to the internet via usb network adapterThe desktop has a lan card.How can I setup the OS so the wireless internet connection is shared to the lan connection to a router to the router can receive an internet connection.
I have MDT 2010 setup and am in the process of setting up a 2nd share, I created the share with no issues, and created the "link" without issues as weel. I am now trying to get the linked share to replicate, and am getting an error that the "everything" profile is not valid, when it does exist on the new share. I even tried creating a new profile and setting it to that one, still get the exact same error.
I have a D-Link DIR615 router which I've been using for the past 5 months (no problems whatsoever). After i've got my laptop from the support service I can't seem to successfully connect to my home network.
My phone can connect with no problem to my router. My laptop sees other wireless networks. This is how it goes: when I try to connect it immediately says "unable to connect" when I run the diagnostics I get the "windows did not receive any response from the wireless router" message. I can only connect after like 30 mins of changing the wireless settings (usually SSID and security) from my router + rebooting it countless times. Even then, I usually check "automatically connect" and the next day after I arrive from work, it doesn't really connect automatically and can't even connect to it (unable to connect message). Even typing a wrong passphrase when it's secured it doesn't say "wrong passphrase" but "unable to connect".
Another very wierd thing is that my wireless network disappears from the network list after a few minutes, I still see other secured wireless networks.
I can connect to a wireless network made by phone (wifi hotspot) with no problems.
After I installed my Belkin N150 wireless router, my desktop computer crashed. Windows 7 will not boot up.Anyone else had this problem and how did you solve it?
belkin router unable to connect to certain web sites by hard wire,but can access through the wireless side with the same computer with windows 7 and firefox or internet explorer
I have a strange problem I can't get to the bottom of. I have replaced my father's wired modem (he's with PostOffice.com in the UK) with a Belkin Surf+ (F7D2301uk) router running firmware version 1.00.16. When he tries to access the network from his Tosh C660 Win 7 Home Premium, 64bit laptop the network connection between the laptop & router disconnects after a minute or so. The only way to reestablish a connection is to Disconnect and Connect again in the Wireless Network section of Networking panel. But here's the weird bit. My own Mac Book keeps connected fine without any problems as does my Sony Ericsson X10 phone.
Every now and then the internet will stop working on my PCs. I have 2 near me at all times and both will stop working, a wireless lappy and wired desky lol.It will come back in a moment or in a little while. I havent figured out if its the router or the cable modem.
Is there any way to enter a router (e.g. 192.168.15.1) via a cable modem, that is, without having to disconnect the cable modem from the computer and connect the router directly to the computer?
my pc was causing a lot of problems. i have a verizon wireless jetpack,with a netgear wireless adapter. I tried uninstalling netgear, then wanted to reinstall it. But I cant install it. It keeps saying no connectivity can b found. like there is a connection missing to the modem. A VW tech guuided me through the jetpack, everything was fine with that. What do I need to do?
I recently purchased a new routeur, D-Link's DIR-825. I am quite happy with it's performance so far, the main reason I bought this model was that it has a USB port so that I could use a HDD as a network.I installed the "Shareport" utility provided by D-Link and yesterday I finally got around to plug my HDD into the routeur. Things went smoothly and I was able to "connect" to the drive from my home computer.I then turn on my laptop, which is my work computer, and tried to connect to the drive. Shareport told me that it was already connected and needed to be disconnected.I mean the whole idea behind me buying a routeur with a USB port was to have a hard drive that would serve as a network backup that could be accessed by both computers at any given time.Besides, if only one computer can be connected to it at a time that's not what I call sharing, the "Shareport" utility should have a different name then.Now is that inherent to this type of setup or is it simply a show of the software limited capabilities?
I've just bought a new router-modem (lynksys x2000) to replace my old modem.After going through the setup(by using quick install guide CD-ROM provide with router-modem), i've got no internet connection. My laptop can connect to the router-modem but not the internet.Do my new modem have its own firewall?(I know my laptop firewall is running). Do i need to disable the firewall? If yes, which one should i disable, my laptop of modem.
just built a computer installed Win 7 Home Prem 64 on it.Booted, loaded drivers, updated drivers w/usb key and laptop.Slow (4 to 5 kb/s dl) internet speed. Did some messing around, had it at normal speeds after messing around (windows updates installed).Hooked up to my Siemens 567, will not connect to internet.Hooked up to my DIR-655 router, will connect at slow speed.Home is brand new, CAT6 Wired, previous Vista machine worked flawless on this Cat6 jack. Wifi works on laptop just fine. (also vista).Bought a network card, same situation so that rules out my computer hardware and leaves the OS and Router/Modem.I am pretty darn good at computers but this is making me lose sleep and is turning me into a bad fiance.
I have a Xbox360 connected to my laptop via cable, then connect to Xbox Live wireless though a Linksys router (G 2.4 ghz). Everything works fine with my +6 year old laptop running XP home, but there is a little lag with one game.
So I bought a new Asus laptop that came with Windows 7 operating system. I tried to connect to Xbox Live the same way as I did with my old laptop, but it will not connect. The lap has a good wireless connection to the internet. (same connection as the old laptop).
I have enabled sharing in the network options. Reconfigured the xbox 360s IP address manually, automatically, and restored the factory setting, Still no connection.
Manually changed addressing on the laptop. Still no connection. The Error message on the Xbox is: Can't obtain an IP address from your router or modem.
Called Xbox tech support, Spend over an hour trying to fix the problem. We did everything. Turning the system on and off, modem on and off. reconfiguring the IP addresses manually, automatically, restoring factory settings, Changing the network setting on the laptop, enabling sharing, and so on. Still unable to fix the problem. The tech support person stated, it is a Windows 7 problem and he is unable to fix it.
I reconnected the old laptop and it connects fine without any issues. The old laptop has one foot in the recycle bin, and I would like to be able to use the New Laptop to connect.
I know the either-net cable works fine. I know I have a good wireless connection to the laptop. (Comcast).
The port on the laptop works with my printer. So I'm sure that's good. I have enable network sharing in the network settings. I have tried changing the IP addresses. Any suggestions?
My sons set me up with my old pc an new pc sharing my hdtv as a monitor. Wires came loose wile I was trying to re-arrange and now only one pc is seen when I choose inputs. is there a good link that shows the wiring diagram for modem, router, pc, tv, dvr...?
Ive been trying to install my wireless drivers, when you run them form CD everything seems fine and says installed, but when it says connect your usb device it starts to instal the intantly stops and says driver not installed..
Its a belkin G usb wireless adapter 802.11g model number F5D7050
Any help would be great , had to switch back to vista to use the internet.
I just installed windows 7 RC on my computer. Everything loaded fine, but I am having trouble getting my belkin wireless G usb working. I run the driver and it installs fine, and when it prompts me to insert the usb. When I insert the usb nothing happens. I have tried other USB ports and running in different compatability modes. It worked fine in XP. On the hardware screen I can see that it is plugged in, but it says it is an unknown wireless usb card (sor something similar to that).
I have a Belkin wireless unit what kind of # am I looking for ? There are a lot of numbers on it so which one do I need ? I'm looking for my security number for my wireless.
I had an existing pc with windows xp home. I just purchased a new pc with windows 7 home. Why I connected the windows 7 pc to the internet using dlink router I was able to access the internet. On the next day though, when I tried to connect again, I was not able to access the internet. Here are the tasks that I have already carried out to check the connectivity.
1. The windows 7 computer has a valid IP address, which means that ARP is working fine and my router is dispensing the addresses correctly.
2. When I try to ping the modem-router, there is no reply. So I am not able to access router using ICMP.
3. My old windows xp pc is able to connect and browse the internet. The problem is only with my new windows 7 pc.
I have a Netgear Adsl2 modem / Router with 4 ports in the rear.The two computers are going to be next to each other and I was just planning on plugging the new PC into the back of the netgear modem to have internet access on both along with the original PC for internet access. NP there.Is it now possible to have the two PC's connected to each other throught the Router/modem to share files and for my children to play games against each other...I.E home network with 2 pc's talking to each other through the net gear modem/router? Both machines only have the one Lan input (I'm pretty sure)Both running windows 7 (one 32bit and the other 64 bit)
I wonder if anyone has got this one to work, I've tried everything, I did have problems with it on Windows XP also, but always got it to work after a while, but now it seem impossible to get it working and im in desperate need for help!
I've installed the latest drivers and when it tells me to plug in the USB adapter, I do that but then it says it can't find it but it did install the software and such so I reboot a few times to see if it starts working, but no, it just wont work, i've done the compability thing also but still doesnt want to work.
Like everyone else I've been having trouble with getting the F5D7050 to work on Windows 7 32-bit. I went through the different compatibility modes using the v4 drivers from Belkin's site. My results ranged from OS not recognizing the driver as compatible to BSOD when using the network. Finally I tried Vista SP1 mode. It works! That's the only mode that worked for me.
I read alot topics on this forum to try solve my problem. I found in here 2 topics about Belkin Wireless G USB adapter , but still i have a problem
I describe whats the problem .
I try to instal on my Windows 7 x64 b.7000 drivers for belkin w g usb adapter f5d7050
I download drivers 4 belkin usb adapter f5d7050 ver.3(like I read about it) - before install i change in install file the compability for all users to windows xp , but it dont wanna install(I get a error)(the product only supports Win200/Winxp32/Vista32/Vista64) , then i switch compability for windows vista and instaler go on,
While installer is going it ask to connect adapter to usb ,what i do, but it seems dont find any anyway .
After all when instalation is finish i just get information that device dont work proply , and the light in adapter never go on
I try update drivers from menage device but still device is not working
I really dont know what else i can do
Mayby that will be some clue
i install Windows 7 on separetly partition "E" , so I have on c: vista , and on disc e:Windows 7 , but in windows 7 mode i cant see partition with Windows vista(I can see just in Disc menagment, that she still there),
. when i open windows vista i see all partitions.
did it make any sense?
anyway my main problem is to instal belkin drivers 4 adapter to WORK fine.