New Modem Sent By Comcast Also A Wireless Modem Can Only Get One To Work?
Jan 6, 2013I have a laptop and regular computer and a new modem sent by comcast also a wireless modem. I can only get one to work. what am i doing wrong?
View 3 RepliesI have a laptop and regular computer and a new modem sent by comcast also a wireless modem. I can only get one to work. what am i doing wrong?
View 3 Repliesi am using n73 mobile to connect to the internet...ut now a days it couldnt get connect....it says modem not found....
View 2 Replies View Relatedhow to get wireless modem driver
View 1 Replies View Relatedso i have two laptops, Acer1(7 home premium) and Acer2(XP) and a dsl modem plugged via ethernet to Acer1. I will share the internet from Acer1 wirelessly to Acer2.
So on Acer1, I create a ad-hoc network and everything and Acer2 is able to connect to it.
If i reboot Acer1, I have to connect to the network I created and it brings it up, Acer2 connects to it but doesn't have internet access. Sometimes it will kick me off my LAN connection and I won't have any internet through either computer.
but if I go in and create a new ad-hoc network, it works fine.
How do i make my laptop/notebook a wireless with usb modem?
View 2 Replies View RelatedI installed a huawei modem EC221 on a laptop - Windows 7 64bit but I cant seem to get it connected to access the internet?
Do I need to install or update the drivers? Don't seem to have any problems with 32 bit version but 64 bit is driving me nuts
I have a problem with Huawei E630 wireless modem. Afert pluging in - PCMCIA type II card - it's starting to install but afert couple seconds it gives BSOD with IRQL_NOT_LESS_OR_EQUAL.
Also, becouse I think it might come handy, card was working well on XP or Vista 32bit.
Oh, and something else, after pluging it install a NEC USB controller - showed in Device Manager - and secondary a Modem.
Installing Huawei modem Driver of PTCL V Wireless on windows 7. In this article you will find how to install huawei modem (ETS2558) drivers of previous version windows (XP) on windows 7.
Other user (other modem brand) of PTCL V or windows XP service pack 3 and vista user may get help from there to install their drivers.
As we know that win 7 has great support for previous windows applications so software make no problem only driver create a problem.
To install the driver follow these steps.
1- Insert CD into CD/ DVD ROM.
2- Cancel auto run of huawei application.
3- Go to start Menu in search bar type "Troubleshooting" and open it from menu.
4- Now click on programs and follow the instruction (Run application in Win XP service pack 2 compatibility mode and follow procedure same as XP).
Select not listed….
Select Location of application….
Click on "Try recommended settings"
Now click on start the Program…
5-After installizations save compatibility settings. (Windows may warn u that it is not compatible just ignore it).
6-Now go to the Device manager here you will see TUSB3410 DEVICE IN Multiport serial adapters which will be marked with some sign Right click on it and then click on update driver. Now click on brows files from computer and select CD/ DVD ROM in which driver is found. It will scan the CD/ DVD ROM n find and install drivers automatically.
7-Refresh the list of device manager or re-open it. U will see that USB-Serial Port (COM 3) in Ports (COM & LPT) will be marked with sign. Now perform same procedure as in step 6 with it.
Now you are ready to use your application.
Now open application ptcl v and click on connect it may take 1 to 2 minutes by displaying a message initializing.
Just bought this belkin router. Linked one computer through LAN and 4 devices through WIFI or some reason my WIFI devices are not able to read or detect connections to the LAN network
View 1 Replies View RelatedMy desktop (windows 7 ultimate 64bit) has been able to connect fine to the internet until I got home from work this morning. My laptop is connecting to the same modem fine through wireless (along with my wii). The modem I am using is Motorola SB 901. When I rightclick my connection on my desktop and hit troubleshoot problems, I get 'local area connection 2 doesn't have a valid ip configuration'. Same thing happens when I switch the ethernet cord to local area connection 1. When I go to control panel, network and internet, network and sharing, the connection map at the top stops between my pc and the network (which is now labeled as 'unidentified network'). Here is a list of what I have done so far to try and resolve the issue:
1. Replaced the ethernet cord with one I know is working
2. Full scanned my pc for viruses
3. Disabled all firewalls and virus protection programs
4. Restored my pc to a previous save state
5. Reset winsock with cmd via these prompts: netsh winsock reset catalog and netsh int ip reset reset.log hit
6. This attempt is unfinished as I am getting stuck. I am attempting to setup a static ip to attempt to resolve the issue, but when I open cmd and type ipconfig/all, the default gateway under my local area connection is completely blank.Here is what comes up with ipconfig/all:
C:UsersPaul>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Paul-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code]....
I own a Belkin Wireless G Modem/Router. I connect my computer to it via Realtek RTL8139/810x wired network adapter.
Just a moment ago, my computer could not connect to the Internet. When I ran the troubleshooting tool, it suggested to "Make sure the other end of the cable is plugged into the router. If that does not help, try a new cable."
I checked the LED light on the network card, and it appears to be solid red. I'm not too sure about its usual colour when it was working fine. The modem's LED shows that it detected a connection from the cable. I tried to replace the cable with another one, but it the light is still red and the modem still shows that it detects a connection from the cable, but my windows is not able to connect to the modem. It failed to detect any connection.
I am currently using a D-link wireless USB adapter to connect to the modem.
Can anyone tell me what is wrong? Is there a problem with my settings or is the network card damaged?
This question may not be what you think it is. I am trying to fix an intermittent issue in my home environment. The issue is I am having to use wireless. Our Xfinity Cable/WAP modem sits on the top floor of our house. I am located in the basement. The wireless signal I get most of the time is very good, and by very good i mean at least 15+ mb/s on [URL]
I am taking the Cisco Network Academy classes and am familiar with network terminology and concepts. However, what I'm trying to do is take a router/WAP (using it downstairs where I'm located) and configure it to access our xfinity modem upstairs, so that I can plug in to it downstairs using a RJ-45.
Let me know what yall think. By the way the router/wap i would be using is a netgear model unknown at this moment but could easily find out.
I am using Micromax 300c EVDO modem ( Datacard ) for wireless broadband connection. In one machine having Intel 915 Chipset motherboard, it is working fine. In the device manager, in the modem category, it shows correctly as " CDMA 2000 Rev A Modem ". In another machine, having Intel DG41TY motherboard, the device manager does not show modem. Only in other devices category, shows as Data services. ( in ports category both diagnostic and service ports are shown correctly)
View 4 Replies View RelatedI hv been using Windows 7 for 2yrs on my HP DV6502AU Laptop, using vista's drivers for the same, everything was fine bt few days back its sound went off with a cross mark on the sound icon. I triesd to reinstall the drivers bt it shows "cannot find the media device for this driver". So i formatted my laptop and installed windows 7 again to check whether it will work or not. And the bad luck followed, now modem driver is showing the same"cannot find the modem device for this driver".
View 3 Replies View RelatedI can't connect to the internet on my desktop pc after I reinstalled windows. I have linksys wrt320n router and I can connect to it only by wi-fi. When I try to install router's setup wizard or network magic - it writes that my computer is not connected to router though it is connected in the same way as it was before. In the LOCAL AREA CONNECTION it is also written that network cable is unplugged...I also tryed to connect just internet cable without router - PC also didn't react. Maybe the problem is that my network adapter (nvidia nforce) is without appropriate drivers? Cause I can't find drivers for nvidia nforce networking contoller for windows 7.
View 2 Replies View RelatedI have one USB modern,how can i configure to be used by two computers??
View 2 Replies View RelatedI cannot get any fax software to see the modem. I used the windows fax program and I think after an windows update this is not working. I have windows home premiun
View 5 Replies View RelatedI just had our internet upgraded to 20MB DL Comcast high speed cable. There are 3 computers on the network. 1 Wired, 2 Wireless. I'm the only computer savvy individual in the household and I don't know what the problem is.I am CONSTANTLY disconnecting from the router even while just browsing the web. I just did for a second while I was typing this up. I'm only about 35-40 feet away from the router, there's nothing to interfere with. My drivers are up to date.
View 3 Replies View Relatedi have two OS install in my PC. one is win xp in c: drive and another is win 7 ultimate 64 bit OS in e: drive.my modem is teracom. from my windows xp i could successfully set up broadband connection and could connect internet but when i try to establish internet connection from win 7 then i am getting error like modem not recognize.
View 4 Replies View RelatedI'm having problems with my computer the OS is windows 7, Home Premium. It will not connect wirlessly to the modem. When i try to connect i get the error message "No connection available". When i first got the computer it worked fine but just suddenly stopped working for no apparent reason. My computer is still as it is at the start i have not installed any new programs. My computer is a Advent Roma 2000.
View 2 Replies View RelatedI recently purchased a small usb fax modem from ebay. It is a simple device, with a usb connector on one end, and a receptacle for a telephone line on the other end. So obviously, this is not difficult to "install". But my problem concerns getting the correct drivers installed. The unit came with a mini-cd-rom which has some drivers. But there are no instructions. It also contained a "Read Me" file, but unfortunately this was i Chinese and I couldn't read it.
The computer specs :
HP200-5120IS, (All-in-one )
Microsoft Windows 7 Home Premium 64-bit Edition
Intel Pentium E5400 / 2.7 GHz, Dual-Core
64-bit Computing
Cache Memory Per Processor 2 MB
4.0 GB, DDR3 SDRAM
Hard Drive 500.0 GB -7200 rpm
DVD-RW (R DL) / DVD-RAM - Serial ATA
LCD display - TFT active matrix, 21.5 in
Graphics - Integrated GMA X4500HD
New computer - Dell Inspiron 15R laptop. Windows-7 home premium 64-bit. Trying to access internet. 7 gives connection option of Broadband where ISP requires ID and Password. However, my ISP does not require this info to log on....its just "plug-n-play" I have run every test and diagnostic that I can find and the only prob I can find is something to do with the DNS, but have no way to fix the problem. The connection is Cable Modem, via LAN wire. One of the diagnostics recognizes my ISP, but still won't let me connect.
View 9 Replies View RelatedUSB modem Samsung sgh-z810 works in Windows 7.
1. connect modem to USB, install all required drivers and software (if don't work, use compatibility mode with Windows XP)
2. install VMware Workstation
3. install Windows XP on VMware Workstation
4. run XP and install all required drivers and software for modem (it's automatic)
5. now you have internet on running Windows XP on VMware Workstation
6. disconnect from internet on Windows XP
7. run connection manager on Windows 7
8. and now trick, add new HW (VM>Settings>Add>Network Adapter>Host-only>Finish) Network Adapter
9. wait few seconds and connection manager find modem on windows 7 (WTF?)
10. now, you can connect to the internet using connection manager in Windows 7
11. close VMware Workstation and enjoy ;-)
I don't know how it's possible, but it works! Cheers!
I installed the windows 7 RC with great enthusiasm but found that the driver for my speedtouch 330 adsl modem which was working fine for beta not working the problem being the setting option for world cannot be selected. Bad experience from windows7 indeed!
View 0 Replies View RelatedI found a link to this but it was 459 days ago.Suggested starting a new thread.I discovered my original PC usb modem (circa 2001) so I tried the set-up procedure and it informs me my fax is installed correctly.I tried to send to my own number, before I set-up receive faxes.I also tried to send to "fax toy" just to test the set-up.All give the message "pending".I have connected to the same telephone connection as my home phone.
View 1 Replies View RelatedI know this might not be the place for this question but i have just downloaded a Firmware update for me modem but the files came in .rom and . bin and i am unfamiliar with these files how do i open them or with what do i open them with???
View 2 Replies View Relatedi got problem with my mobile dial up modem, the modem was detected on device manager, and queryable on the modem properties itself, but i dont know why my modem cant be found when i try to create new dial up connection. i try to research over google and found, it could be the telephony problem, and yes when i try to open phone & modem control panel, then the error showed Code: phone and modem control panel can not be opened. you may have a problem starting telephony service , then i try to restaring the telephony service on windows services, i dont know why this problem occured, cause yesterday everything is just fine...
View 5 Replies View RelatedA few days ago i was trying to connect my laptop to my ps3.To do this i was changing setting etc but never got it to work anyway.The next day i turn the computer on and can't connect to the internet.I think it was something to do with dns.I uninstalled and reinstalled my usb modem and software and always get full connection bars and says its connected, but in the bottom right hand corner it says network "no internet access" with a yellow triangle over it.It was because i was changing all of the settings in network and sharing senter, but being the wally i am, never wrote down the original settings. Whatever i did i am fairly certain i did it in the change adapter settings.
View 5 Replies View RelatedI have a Smartlink 56K PCI modem. I'm assuming there are no 64 bit drivers. any PCI or USB modems that will work with Windows 7 64 bit?
View 9 Replies View RelatedI'm going out on a limb here in what I want to do. I'm not even sure it can be done.
Is there anyway for me to get a dial tone out of my laptop? I get my wifi from a Verizon UML290 LTE modem. I need it to run my credit card machine in my vehicle.
Every now and then the internet will stop working on my PCs. I have 2 near me at all times and both will stop working, a wireless lappy and wired desky lol.It will come back in a moment or in a little while. I havent figured out if its the router or the cable modem.
View 3 Replies View Related