PC Can't Recognize Modem
Nov 25, 2012
I can't connect to the internet on my desktop pc after I reinstalled windows. I have linksys wrt320n router and I can connect to it only by wi-fi. When I try to install router's setup wizard or network magic - it writes that my computer is not connected to router though it is connected in the same way as it was before. In the LOCAL AREA CONNECTION it is also written that network cable is unplugged...I also tryed to connect just internet cable without router - PC also didn't react. Maybe the problem is that my network adapter (nvidia nforce) is without appropriate drivers? Cause I can't find drivers for nvidia nforce networking contoller for windows 7.
View 2 Replies
ADVERTISEMENT
Feb 20, 2012
win 7 premium does not recognize surfboard modem sbg6580 after running installation program.
View 4 Replies
View Related
Dec 2, 2011
i am using n73 mobile to connect to the internet...ut now a days it couldnt get connect....it says modem not found....
View 2 Replies
View Related
Jan 6, 2013
I have a laptop and regular computer and a new modem sent by comcast also a wireless modem. I can only get one to work. what am i doing wrong?
View 3 Replies
View Related
Jan 26, 2012
I am using Micromax 300c EVDO modem ( Datacard ) for wireless broadband connection. In one machine having Intel 915 Chipset motherboard, it is working fine. In the device manager, in the modem category, it shows correctly as " CDMA 2000 Rev A Modem ". In another machine, having Intel DG41TY motherboard, the device manager does not show modem. Only in other devices category, shows as Data services. ( in ports category both diagnostic and service ports are shown correctly)
View 4 Replies
View Related
Mar 22, 2012
I hv been using Windows 7 for 2yrs on my HP DV6502AU Laptop, using vista's drivers for the same, everything was fine bt few days back its sound went off with a cross mark on the sound icon. I triesd to reinstall the drivers bt it shows "cannot find the media device for this driver". So i formatted my laptop and installed windows 7 again to check whether it will work or not. And the bad luck followed, now modem driver is showing the same"cannot find the modem device for this driver".
View 3 Replies
View Related
Apr 28, 2012
I have one USB modern,how can i configure to be used by two computers??
View 2 Replies
View Related
Jul 19, 2012
I cannot get any fax software to see the modem. I used the windows fax program and I think after an windows update this is not working. I have windows home premiun
View 5 Replies
View Related
Mar 13, 2011
i have two OS install in my PC. one is win xp in c: drive and another is win 7 ultimate 64 bit OS in e: drive.my modem is teracom. from my windows xp i could successfully set up broadband connection and could connect internet but when i try to establish internet connection from win 7 then i am getting error like modem not recognize.
View 4 Replies
View Related
Feb 22, 2011
I'm having problems with my computer the OS is windows 7, Home Premium. It will not connect wirlessly to the modem. When i try to connect i get the error message "No connection available". When i first got the computer it worked fine but just suddenly stopped working for no apparent reason. My computer is still as it is at the start i have not installed any new programs. My computer is a Advent Roma 2000.
View 2 Replies
View Related
Aug 22, 2012
I recently purchased a small usb fax modem from ebay. It is a simple device, with a usb connector on one end, and a receptacle for a telephone line on the other end. So obviously, this is not difficult to "install". But my problem concerns getting the correct drivers installed. The unit came with a mini-cd-rom which has some drivers. But there are no instructions. It also contained a "Read Me" file, but unfortunately this was i Chinese and I couldn't read it.
The computer specs :
HP200-5120IS, (All-in-one )
Microsoft Windows 7 Home Premium 64-bit Edition
Intel Pentium E5400 / 2.7 GHz, Dual-Core
64-bit Computing
Cache Memory Per Processor 2 MB
4.0 GB, DDR3 SDRAM
Hard Drive 500.0 GB -7200 rpm
DVD-RW (R DL) / DVD-RAM - Serial ATA
LCD display - TFT active matrix, 21.5 in
Graphics - Integrated GMA X4500HD
View 7 Replies
View Related
Apr 17, 2011
New computer - Dell Inspiron 15R laptop. Windows-7 home premium 64-bit. Trying to access internet. 7 gives connection option of Broadband where ISP requires ID and Password. However, my ISP does not require this info to log on....its just "plug-n-play" I have run every test and diagnostic that I can find and the only prob I can find is something to do with the DNS, but have no way to fix the problem. The connection is Cable Modem, via LAN wire. One of the diagnostics recognizes my ISP, but still won't let me connect.
View 9 Replies
View Related
Sep 27, 2009
USB modem Samsung sgh-z810 works in Windows 7.
1. connect modem to USB, install all required drivers and software (if don't work, use compatibility mode with Windows XP)
2. install VMware Workstation
3. install Windows XP on VMware Workstation
4. run XP and install all required drivers and software for modem (it's automatic)
5. now you have internet on running Windows XP on VMware Workstation
6. disconnect from internet on Windows XP
7. run connection manager on Windows 7
8. and now trick, add new HW (VM>Settings>Add>Network Adapter>Host-only>Finish) Network Adapter
9. wait few seconds and connection manager find modem on windows 7 (WTF?)
10. now, you can connect to the internet using connection manager in Windows 7
11. close VMware Workstation and enjoy ;-)
I don't know how it's possible, but it works! Cheers!
View 6 Replies
View Related
May 6, 2009
I installed the windows 7 RC with great enthusiasm but found that the driver for my speedtouch 330 adsl modem which was working fine for beta not working the problem being the setting option for world cannot be selected. Bad experience from windows7 indeed!
View 0 Replies
View Related
Apr 6, 2011
I found a link to this but it was 459 days ago.Suggested starting a new thread.I discovered my original PC usb modem (circa 2001) so I tried the set-up procedure and it informs me my fax is installed correctly.I tried to send to my own number, before I set-up receive faxes.I also tried to send to "fax toy" just to test the set-up.All give the message "pending".I have connected to the same telephone connection as my home phone.
View 1 Replies
View Related
Sep 28, 2011
I know this might not be the place for this question but i have just downloaded a Firmware update for me modem but the files came in .rom and . bin and i am unfamiliar with these files how do i open them or with what do i open them with???
View 2 Replies
View Related
Apr 27, 2010
i got problem with my mobile dial up modem, the modem was detected on device manager, and queryable on the modem properties itself, but i dont know why my modem cant be found when i try to create new dial up connection. i try to research over google and found, it could be the telephony problem, and yes when i try to open phone & modem control panel, then the error showed Code: phone and modem control panel can not be opened. you may have a problem starting telephony service , then i try to restaring the telephony service on windows services, i dont know why this problem occured, cause yesterday everything is just fine...
View 5 Replies
View Related
Nov 13, 2010
A few days ago i was trying to connect my laptop to my ps3.To do this i was changing setting etc but never got it to work anyway.The next day i turn the computer on and can't connect to the internet.I think it was something to do with dns.I uninstalled and reinstalled my usb modem and software and always get full connection bars and says its connected, but in the bottom right hand corner it says network "no internet access" with a yellow triangle over it.It was because i was changing all of the settings in network and sharing senter, but being the wally i am, never wrote down the original settings. Whatever i did i am fairly certain i did it in the change adapter settings.
View 5 Replies
View Related
Jul 6, 2009
I have a Smartlink 56K PCI modem. I'm assuming there are no 64 bit drivers. any PCI or USB modems that will work with Windows 7 64 bit?
View 9 Replies
View Related
Aug 27, 2011
I'm going out on a limb here in what I want to do. I'm not even sure it can be done.
Is there anyway for me to get a dial tone out of my laptop? I get my wifi from a Verizon UML290 LTE modem. I need it to run my credit card machine in my vehicle.
View 1 Replies
View Related
Aug 30, 2011
Every now and then the internet will stop working on my PCs. I have 2 near me at all times and both will stop working, a wireless lappy and wired desky lol.It will come back in a moment or in a little while. I havent figured out if its the router or the cable modem.
View 3 Replies
View Related
Apr 23, 2012
Yi pay about 30$ a mounth for a 300 kbit 5 gig traffic internet.But,it is free from 3 to 7pm.and I should download my heavy files in these hours.The thing is: I have to set a new username and password for this free internet.and changing the username and password needs a restart of my modem.I set my computer to turn on at 3pm.I set the public free user name and password in my modem before i go to sleep(note that it only connects to the internet at 3pm and AFTER I reset the modem)And IDM will automatically resume my unfinished downloads at 3:05 pm.So what I have to do is to wake up at 3 and retart the modem.Is it possible(with a program or anything) for me to have my computer go to my browser,enter the modem(by going to 192.168.1.1),enter the username and password and retart the modem?
View 1 Replies
View Related
Apr 27, 2012
Is there any way to enter a router (e.g. 192.168.15.1) via a cable modem, that is, without having to disconnect the cable modem from the computer and connect the router directly to the computer?
View 4 Replies
View Related
Aug 4, 2012
my son always keep looking Internet videos though my wireless modem. so is there any way to block modem for other devices. so that only i can access.
View 2 Replies
View Related
Aug 6, 2012
I am trying to enable a new Incoming Connection but get a message saying "Incoming connections depend on the Routing and Remote Access service, which was unable to start".I have a standard 56K modem installed, using a telephone line.The computer is a stand alone system, running a local application where Internet access is not required.I do however need to access the PC from time to time and dialup is the only option.Is there a work around as it appears that Windows 7 needs to identify a Netork befor starting the Routing and Remote Access service?
View 1 Replies
View Related
Aug 27, 2012
tw-Roadrunner rents cable modem for 3 bucks/month - What device can I buy that will do a good job of this so I don't pay rent forever, if any?
View 6 Replies
View Related
Nov 12, 2009
i think i finde why my PC have high PING on winodws 7. Here is windows ImageShack® - Done Winodws 7 cant finde this driver, i dont know what should i do, and where i can get this driver? Because i searched a lot of forums but i didnt saw from where i can download this driver. If i try fix this driver, maybe my Ping will fix on winodws 7.
View 2 Replies
View Related
Nov 26, 2009
When i dial up, i get some Error Message 633 message about COM port being used by other application or modem not configured properly.
In device manager the modem seems OK, and i dont know of any other device using a COM port. I've tried different drivers, swapping the modem around inside the case but no joy and i'm getting really annoyed now.
View 1 Replies
View Related
Sep 25, 2009
my nokia n70 usb modem is not working as it is fire-walled, also not accessing the port on which it is connected,
so that the remote access connection manager cannot run while i try to connect.
View 5 Replies
View Related
Dec 16, 2011
where i can get the driver for usb modem driver for windows 7
View 1 Replies
View Related
Mar 28, 2012
how to get wireless modem driver
View 1 Replies
View Related
