Entering Router Via Modem?
Apr 27, 2012Is there any way to enter a router (e.g. 192.168.15.1) via a cable modem, that is, without having to disconnect the cable modem from the computer and connect the router directly to the computer?
View 4 Replies
ADVERTISEMENT
Network Comes In And Out Sometimes Goes Down Router Or Modem?
Aug 30, 2011Every now and then the internet will stop working on my PCs. I have 2 near me at all times and both will stop working, a wireless lappy and wired desky lol.It will come back in a moment or in a little while. I havent figured out if its the router or the cable modem.
View 3 Replies View RelatedCable Modem Router Connections
Dec 3, 2012my pc was causing a lot of problems. i have a verizon wireless jetpack,with a netgear wireless adapter. I tried uninstalling netgear, then wanted to reinstall it. But I cant install it. It keeps saying no connectivity can b found. like there is a connection missing to the modem. A VW tech guuided me through the jetpack, everything was fine with that. What do I need to do?
View 2 Replies View RelatedNo Internet Connection After Changing To New Modem Router
Mar 15, 2012I've just bought a new router-modem (lynksys x2000) to replace my old modem.After going through the setup(by using quick install guide CD-ROM provide with router-modem), i've got no internet connection. My laptop can connect to the router-modem but not the internet.Do my new modem have its own firewall?(I know my laptop firewall is running). Do i need to disable the firewall? If yes, which one should i disable, my laptop of modem.
View 9 Replies View RelatedNo Internet Through DSL Modem / Slow Snail Through Router
Aug 9, 2011just built a computer installed Win 7 Home Prem 64 on it.Booted, loaded drivers, updated drivers w/usb key and laptop.Slow (4 to 5 kb/s dl) internet speed. Did some messing around, had it at normal speeds after messing around (windows updates installed).Hooked up to my Siemens 567, will not connect to internet.Hooked up to my DIR-655 router, will connect at slow speed.Home is brand new, CAT6 Wired, previous Vista machine worked flawless on this Cat6 jack. Wifi works on laptop just fine. (also vista).Bought a network card, same situation so that rules out my computer hardware and leaves the OS and Router/Modem.I am pretty darn good at computers but this is making me lose sleep and is turning me into a bad fiance.
View 3 Replies View RelatedRouter Remote Admin Through Verizon Dsl Modem?
Mar 18, 2012im trying to setup for accessing my external router via remote admin port 8080 which has to jump through the verizon dsl modemthis is what i[CODE]
View 3 Replies View RelatedXbox - Can't Obtain An IP Address From Your Router Or Modem
Dec 31, 2009I have a Xbox360 connected to my laptop via cable, then connect to Xbox Live wireless though a Linksys router (G 2.4 ghz). Everything works fine with my +6 year old laptop running XP home, but there is a little lag with one game.
So I bought a new Asus laptop that came with Windows 7 operating system. I tried to connect to Xbox Live the same way as I did with my old laptop, but it will not connect. The lap has a good wireless connection to the internet. (same connection as the old laptop).
I have enabled sharing in the network options. Reconfigured the xbox 360s IP address manually, automatically, and restored the factory setting, Still no connection.
Manually changed addressing on the laptop. Still no connection. The Error message on the Xbox is: Can't obtain an IP address from your router or modem.
Called Xbox tech support, Spend over an hour trying to fix the problem. We did everything. Turning the system on and off, modem on and off. reconfiguring the IP addresses manually, automatically, restoring factory settings, Changing the network setting on the laptop, enabling sharing, and so on. Still unable to fix the problem. The tech support person stated, it is a Windows 7 problem and he is unable to fix it.
I reconnected the old laptop and it connects fine without any issues. The old laptop has one foot in the recycle bin, and I would like to be able to use the New Laptop to connect.
I know the either-net cable works fine. I know I have a good wireless connection to the laptop. (Comcast).
The port on the laptop works with my printer. So I'm sure that's good. I have enable network sharing in the network settings. I have tried changing the IP addresses. Any suggestions?
How To Connect Router To Modem To Computer To Hdtv
Apr 29, 2012My sons set me up with my old pc an new pc sharing my hdtv as a monitor. Wires came loose wile I was trying to re-arrange and now only one pc is seen when I choose inputs. is there a good link that shows the wiring diagram for modem, router, pc, tv, dvr...?
View 1 Replies View RelatedUnable To Connect To Dlink Modem Router Using Windows 7 Pc
Dec 3, 2010I had an existing pc with windows xp home. I just purchased a new pc with windows 7 home. Why I connected the windows 7 pc to the internet using dlink router I was able to access the internet. On the next day though, when I tried to connect again, I was not able to access the internet. Here are the tasks that I have already carried out to check the connectivity.
1. The windows 7 computer has a valid IP address, which means that ARP is working fine and my router is dispensing the addresses correctly.
2. When I try to ping the modem-router, there is no reply. So I am not able to access router using ICMP.
3. My old windows xp pc is able to connect and browse the internet. The problem is only with my new windows 7 pc.
I.E Home Network With 2 Pc's Talking To Each Other Through Net Gear Modem / Router
Aug 17, 2011I have a Netgear Adsl2 modem / Router with 4 ports in the rear.The two computers are going to be next to each other and I was just planning on plugging the new PC into the back of the netgear modem to have internet access on both along with the original PC for internet access. NP there.Is it now possible to have the two PC's connected to each other throught the Router/modem to share files and for my children to play games against each other...I.E home network with 2 pc's talking to each other through the net gear modem/router? Both machines only have the one Lan input (I'm pretty sure)Both running windows 7 (one 32bit and the other 64 bit)
View 3 Replies View RelatedBelkin Share Wireless Modem Router WiFi And LAN Not Linked?
Dec 12, 2011Just bought this belkin router. Linked one computer through LAN and 4 devices through WIFI or some reason my WIFI devices are not able to read or detect connections to the LAN network
View 1 Replies View RelatedBelkin Wireless G Modem / Router And Realtek RTL8139/810x
Nov 25, 2009I own a Belkin Wireless G Modem/Router. I connect my computer to it via Realtek RTL8139/810x wired network adapter.
Just a moment ago, my computer could not connect to the Internet. When I ran the troubleshooting tool, it suggested to "Make sure the other end of the cable is plugged into the router. If that does not help, try a new cable."
I checked the LED light on the network card, and it appears to be solid red. I'm not too sure about its usual colour when it was working fine. The modem's LED shows that it detected a connection from the cable. I tried to replace the cable with another one, but it the light is still red and the modem still shows that it detects a connection from the cable, but my windows is not able to connect to the modem. It failed to detect any connection.
I am currently using a D-link wireless USB adapter to connect to the modem.
Can anyone tell me what is wrong? Is there a problem with my settings or is the network card damaged?
Connection Betweenaccess Point Router Or Cable Modem And Internet Broken?
Oct 22, 2011can't connect to internet it says connection between access point router or cable modem and internet is broken
View 4 Replies View RelatedModem And Router Will Not Connect To Computer Only Shows Unidentified Network/public No Internet Access, Wired Connection
Nov 11, 2010For some reason my router and modem will not show correctly on my dell inspirion one desktop. Im running windows 7 and here are the net work connection deatils
Connection -specific DNS Belkin
Description Realtek PCIe GBE Family Controller
Physical Address 00-00-00-00-00-00
DCHP Enabled Yes
Ipv4 Address 192.168.2.2
Ipv4 Subnet Mask 255.255.255.0
Lease obtained Wednesday, November 10, 2010 9:45 PM
Lease Expires Sunday, December 18, 2146 4:17 AM
IPv4 Default Gateway 192.168.2.1
Ipv4 DHCP Server 192.168.2.1
Ipv4 DNS Server 192.168.2.1
IPv4 WINS Server
NetBIOS over Tcpip enabled Yes
The Connection was working about ten days ago and then suddenly stopped and read as an unidentified network no internet access. at one point is was not receiving packets but now it is but it still says no internet access on the IPv4 Connectivity. Media state is also enabled and the speed is 100.0 Mbps when i troubleshoot it says windows cant identify problem but in the details it says default gateway is available. when i use the cmd prompt ipconfig/all my local ethernet adapter has a physical address of all zeros.
'No Internet Access' IP Address Shows Router Not The Modem IP Address
Jul 7, 2012My internet connection shows 'no internet access' even though my ISP shows the connection is coming into the house just fine. I usually use a router (NetGear-WNR3500U) but I right now I have the Ethernet connection plugged directly into my PC. I tried directly plugging into my laptop and the internet works just fine. So I know the problem resides in the PC.
Some troubleshooting things I have tried.
-Power cycled my modem, router and PC.
-Repinged my connection from my ISP(Comcast Xfinity)
-Used the reset option on the router and the modem
-I was walked through the internet options needed with the tech support from my ISP to make sure DHCP was enabled and every other setting was correct, and he cleared me that all settings were correct.
-Tried ipconfig commands to /renew and /release my IP When I tried ipconfig /renew I get the error 'An error occurred while renewing interface Local Area Connection : unable to contact your DHCP server'
-Restored my PC to a restore point where the Internet was working
All of these options did not work.
What I think the problem is and I am not sure how to fix it, when I run the ipconfig /all command my Auto configuration IPv4 Address shows 169.254.112.76 which I was told is a router IP address even though I am plugged directly from the modem to my PC with an Ethernet cord. So I think that's my problem? But I am not sure.
Can't Connect Net Using Mobile Modem - It Says Modem Not Found
Dec 2, 2011i am using n73 mobile to connect to the internet...ut now a days it couldnt get connect....it says modem not found....
View 2 Replies View RelatedNew Modem Sent By Comcast Also A Wireless Modem Can Only Get One To Work?
Jan 6, 2013I have a laptop and regular computer and a new modem sent by comcast also a wireless modem. I can only get one to work. what am i doing wrong?
View 3 Replies View RelatedWhat Is Better A Wireless Router Or A Wired Router Router
Feb 20, 2013To view Netflix or Amazon movies which type of router am I better off with?
View 3 Replies View RelatedF2 Entering Set Up Then Hangs?
Jun 3, 2011my acer 4741G keeps hanging everytime I open internet explorer. I had to close the power and then reboot it again. Yesterday, when I reboot, It didn't, Screen displays press12 to enter set up
View 1 Replies View RelatedTyping When Entering User Name
Jun 17, 2012I'm just setting up a new computer, and not used to the keyboard. When I was installing the operating system I was asked for a User name. Before I had a chance to do anything it had accepted the name GREU and moved on to the next step.I've tried doing a search in regedit for GREU, changed it in one place, but its still showing up all over. Is there a complete fix to this or should I resign myself to being known as Greu for the next few years?
View 4 Replies View RelatedSys-data Needs Re-entering After Each Boot
Nov 7, 2009 After a successful installation of Windows 7, I have the following irritating problem:
Some data needs to be entered after each boot or even more frequently.
For instance, the username/password for the "Dial-UP/VPN" Internet connection is not kept across boots.
The setting of the desktop is not kept (e.g., the size of desktop icons).
This seems to be a system-wide permissions' problem to write to a certain directory (e.g., a directory where the system keeps the data is read only).
Can you suggest in which directory/file Windows 7 keeps desktop settings and login credentials - so I could check this directory/file permissions ?
BSOD On Startup After Entering Password?
Mar 25, 2012I cannot access non-safe mode, and I'm pretty frustrated and not able to concentrate correctly. its a lot of steps for someone who just wants some answers. So, here it goes. (though It didn't Zip.)Windows 7 64 bit, original instal, full retail.
View 1 Replies View RelatedBSOD When Entering Sleep Mode?
Aug 17, 2012I've been getting a BSOD fairly regularly when trying to enter sleep mode. I attached all the seven forums info but if theres anything else you need let me know.EDIT - Ive been messing around with it a bit and it seems the the BSOD can appear when trying to go into sleep or hibernate mode. It shows up inconsistently in both modes.
View 3 Replies View RelatedStop Browser From Entering The Username?
Feb 2, 2011I want to stop my browser from entering my user name - it is not entering my password. While rummaging around on the computer I came across the Credential Manager and removed all of the Generic Credentials (there was nothing in the first two vaults). I then went online to see if that would work - No. I went to my Live Mail and DID have to put in my password to have the Live Mail program open. I went to the Credential Manager to see what that password logon created. It created the email address user name and 13 Windows Livetoken):name=(my email address;ser... Then I can't read the rest. What are those 13 (token)s?
View 3 Replies View RelatedEntering RGB Values In Color Picker?
Jul 11, 2010entering 3 digit values into the Windows 7 color picker?? It's bizarre - I can only enter 2, and geta sytem ping if I try to type a third. I even tried reducing my font size, but that's clearly not it.
View 9 Replies View RelatedComputer Not Entering Sleep Mode
Jan 6, 2012Just recently my computer has not been entering sleep mode. Nothing changed from last week and now it doesn't go. I can select sleep from the start up menu but it instantly turns back on. I went into device manager and deselected all usb and my wireless mouse and keyboard from waking the computer. Still won't sleep but now can enter sleep mode from the start menu and will stay asleep. However won't enter sleep by inactivity. If I unplug the usb receiver the computer will enter sleep like it use to. What going on? Even changed the batteries, because this happened a year ago and it was becuase they were dying
View 4 Replies View RelatedWhy Windows 7 Would Reboot Itself After Entering Sleep Mode
Apr 23, 2011what could be the root cause why the W7 would reboot itself after entering sleep mode.
View 1 Replies View RelatedBSOD When Entering Sleep Mode With Windows 7 X64?
Dec 2, 2011I have noticed that my desktop will not enter sleep mode. Instead, the screen enter energy saving mode and the system continues to remain active for about 10 minutes before turning off. As long as my system does not enter sleep mode, it works just fine. According to the dump file, the issue is caused by ntoskrnl.exe and an errormessageDRIVER_POWER_STATE_FAILURE.
View 2 Replies View RelatedChange The Drive Letters Without Entering Into Windows 7?
Aug 8, 2011I encountered a pretty bad error, but I feel like it's only because when transferring over my system image it did so by going from C --> to D. I've spent hours Google searching and burning bootable discs to no avail. What I've found out is that Partition Magic seems to be the only software in the universe that can change your drive letters around. I tried changing the drive letters through something in Windows DOS in Windows Recovery but that didn't work on the reboot. Supposedly, the Partition Magic CD itself is bootable, but to create a bootable CD from scratch it's a downright nightmare.
View 12 Replies View RelatedFrequent BSOD While Entering Sleep Mode?
Jul 17, 2012I'm having a very annoying problem where my laptop will begin to enter sleep mode, but instead of powering down it keeps running for a few minutes and then crashes.When I start up my laptop again I get this
[code]...
BSOD When Entering Sleep Mode On Windows 7 HP-32
Aug 31, 2012I keep getting BSOD when I try to put my 5 year old HP Pavilion dv6000 laptop in sleep mode, by either tapping the power button, or going through the start menu. This started happening a couple days ago, after Windows did an update.
I've done a system file check and it came up clean, and I also updated my video drivers, but to no avail. I don't really know where to go from here.