Connection Betweenaccess Point Router Or Cable Modem And Internet Broken?
Oct 22, 2011can't connect to internet it says connection between access point router or cable modem and internet is broken
View 4 Replies
ADVERTISEMENT
No Internet Connection After Changing To New Modem Router
Mar 15, 2012I've just bought a new router-modem (lynksys x2000) to replace my old modem.After going through the setup(by using quick install guide CD-ROM provide with router-modem), i've got no internet connection. My laptop can connect to the router-modem but not the internet.Do my new modem have its own firewall?(I know my laptop firewall is running). Do i need to disable the firewall? If yes, which one should i disable, my laptop of modem.
View 9 Replies View RelatedModem And Router Will Not Connect To Computer Only Shows Unidentified Network/public No Internet Access, Wired Connection
Nov 11, 2010For some reason my router and modem will not show correctly on my dell inspirion one desktop. Im running windows 7 and here are the net work connection deatils
Connection -specific DNS Belkin
Description Realtek PCIe GBE Family Controller
Physical Address 00-00-00-00-00-00
DCHP Enabled Yes
Ipv4 Address 192.168.2.2
Ipv4 Subnet Mask 255.255.255.0
Lease obtained Wednesday, November 10, 2010 9:45 PM
Lease Expires Sunday, December 18, 2146 4:17 AM
IPv4 Default Gateway 192.168.2.1
Ipv4 DHCP Server 192.168.2.1
Ipv4 DNS Server 192.168.2.1
IPv4 WINS Server
NetBIOS over Tcpip enabled Yes
The Connection was working about ten days ago and then suddenly stopped and read as an unidentified network no internet access. at one point is was not receiving packets but now it is but it still says no internet access on the IPv4 Connectivity. Media state is also enabled and the speed is 100.0 Mbps when i troubleshoot it says windows cant identify problem but in the details it says default gateway is available. when i use the cmd prompt ipconfig/all my local ethernet adapter has a physical address of all zeros.
Cable Modem Router Connections
Dec 3, 2012my pc was causing a lot of problems. i have a verizon wireless jetpack,with a netgear wireless adapter. I tried uninstalling netgear, then wanted to reinstall it. But I cant install it. It keeps saying no connectivity can b found. like there is a connection missing to the modem. A VW tech guuided me through the jetpack, everything was fine with that. What do I need to do?
View 2 Replies View RelatedAccess A Cable Modem Via Wireless Access Point?
Feb 19, 2012This question may not be what you think it is. I am trying to fix an intermittent issue in my home environment. The issue is I am having to use wireless. Our Xfinity Cable/WAP modem sits on the top floor of our house. I am located in the basement. The wireless signal I get most of the time is very good, and by very good i mean at least 15+ mb/s on [URL]
I am taking the Cisco Network Academy classes and am familiar with network terminology and concepts. However, what I'm trying to do is take a router/WAP (using it downstairs where I'm located) and configure it to access our xfinity modem upstairs, so that I can plug in to it downstairs using a RJ-45.
Let me know what yall think. By the way the router/wap i would be using is a netgear model unknown at this moment but could easily find out.
No Internet Through DSL Modem / Slow Snail Through Router
Aug 9, 2011just built a computer installed Win 7 Home Prem 64 on it.Booted, loaded drivers, updated drivers w/usb key and laptop.Slow (4 to 5 kb/s dl) internet speed. Did some messing around, had it at normal speeds after messing around (windows updates installed).Hooked up to my Siemens 567, will not connect to internet.Hooked up to my DIR-655 router, will connect at slow speed.Home is brand new, CAT6 Wired, previous Vista machine worked flawless on this Cat6 jack. Wifi works on laptop just fine. (also vista).Bought a network card, same situation so that rules out my computer hardware and leaves the OS and Router/Modem.I am pretty darn good at computers but this is making me lose sleep and is turning me into a bad fiance.
View 3 Replies View RelatedInternet Connection With USB 3G Modem *10000?
Oct 21, 2011The problem with Windows 7 and an USB 3G modem is that everytime I use it it creates a new connection, and next time I plug the modem in it will be like "Internett Modem Connection 11" and in the connection list I got many of them, how can I prevent this issue? And can I delete some of them by any chance?
View 3 Replies View RelatedShare Internet Connection Via Cross Over Cable
Jul 20, 2009Is it possible to do that ? I knew it might be possible but I found some saying that if the ADSL modem is connected using LAN then it will not work.
So here's my setup:
PC A and PC B (Both using Windows 7 64)
> PC A got two LAN port (LAN C and D)
> PC B got one LAN port
Cross Over cable
ADSL Modem - Connected to PC A via LAN C
What I want to do is connect the crossover via my PC A's LAN C to PC B's LAN to share the internet connection. Is it possible ? I had managed to make the PC B joined my PC A in homegroup, which mean file sharing has no problem at all. I just doesn't know how to set the IP, DNS, gateway to make my PC B access my PC A internet. Any help ? Please let me know it is possible.
Unstable Internet Connection When Changing From Cable To Wireless?
Jan 20, 2012I have this problem with my laptop. If i am using a cable to connect to the internet and then unplug it and switch to wireless connection, the internet connection gets unstable. The thing is it says it is connected to the right wireless connection AND it claims to have internet connection. - And i do - for a few minutes.. If i deactivate/activate the wireless internet i am able to surf around for a few minutes again, but then it does the same thing again - shows up as having internet connection but im unable to connect to it..Strangest thing is that i am sometimes able to connect to the internet ONLY if another computer is using the wireless internet too.. It still shows up as recieving a nice signal with internet access even though i cant connect to the internet.
The same problem also occurs sometimes when im switching from one wireless connection (at home etc) to another (work etc)..I've had this problem for a few months now.. Comming to think of it i might have had this problem ever since i got my laptop.. Rebooting my computer fixes it every time, but it's not a permanent solution.. Im running original Windows 7 Home Premium x64 which came with the laptop.. Also im not using static ip or anything like that - switching to static ip doesn't do the trick.. Running ipconfig /all command from cmd also shows me as connected to the right router.. The problem occurs every time i switch between cable and wireless and not only at my home or work but also at friends..I'm not sure if i need to leave any more details, if i've left anything out just let me know.
Can Use Two Wirless Router Internet Connection In Same Pc
May 17, 2012can i use two wireless router internet connection in same pc
View 2 Replies View RelatedDesktop Connects To Router But No Internet Connection
Sep 1, 2012I have been having a problem with my Desktop for about a week now. It is running Windows 7 Home Premium 64-bit. No built in wireless adapter, but using a USB TP-Link TL-WN722N wireless adapter. The computer can connect to the network, but the internet connection just stopped working. My cell phone, xBox, and Wii can all connect just fine and have internet connectivity. I have already tried:
View 5 Replies View RelatedMake A New Connection To Test Internet Without Router
Jun 17, 2011I tried to make a new connection to test my internet without my router and all the time the error 117 appears and I cannot make a new connection.
View 2 Replies View RelatedRouter Keeps Losing Internet Connection And Needs Resetting?
May 12, 2012For the last few days of an evening after downloading large amounts of data using Bit-torrent i.e. 70GB, I keep losing my internet connection. I need to turn my super-hub on and off again, but it will keep losing the connection. I have noticed that if I exit Bit-torrent then I don't lose my connection, but I am not sure whether this is just a coincidence. Is this because of the amount of data I am downloading using Bit-torrent and my super-hub is turning off the connection on purpose or is this something else?
View 3 Replies View RelatedInternet Connection Dropping, Probably Router's Fault?
Aug 18, 2012So lately I have been disconnected from the internet every now and then. Usually I just power cycle my modem and router and move on. But today it happened twice so I need to figure out the problem. I powered cycled the modem alone, and I still had no connection. I power cycled the router and I had connection after so I'm assuming it's the router to blame. The router plugs into my modem, and the ethernet cord from the router goes into one of these: Amazon.com: Dynex DX-EHB4 - Hub - 4 ports - Ethernet - 10Base-T - DC power - external: Computers & Accessories. My PC, Xbox and PS3 are all connected to that. Also during this time my iPhone couldn't get internet through WiFi. I have the D-Link DIR-655 as my router.
View 2 Replies View RelatedShare An Internet Wireless Connection To Lan Via Router?
Nov 28, 2012OS: Windows 7
Desktop connected to the internet via usb network adapterThe desktop has a lan card.How can I setup the OS so the wireless internet connection is shared to the lan connection to a router to the router can receive an internet connection.
'No Internet Access' IP Address Shows Router Not The Modem IP Address
Jul 7, 2012My internet connection shows 'no internet access' even though my ISP shows the connection is coming into the house just fine. I usually use a router (NetGear-WNR3500U) but I right now I have the Ethernet connection plugged directly into my PC. I tried directly plugging into my laptop and the internet works just fine. So I know the problem resides in the PC.
Some troubleshooting things I have tried.
-Power cycled my modem, router and PC.
-Repinged my connection from my ISP(Comcast Xfinity)
-Used the reset option on the router and the modem
-I was walked through the internet options needed with the tech support from my ISP to make sure DHCP was enabled and every other setting was correct, and he cleared me that all settings were correct.
-Tried ipconfig commands to /renew and /release my IP When I tried ipconfig /renew I get the error 'An error occurred while renewing interface Local Area Connection : unable to contact your DHCP server'
-Restored my PC to a restore point where the Internet was working
All of these options did not work.
What I think the problem is and I am not sure how to fix it, when I run the ipconfig /all command my Auto configuration IPv4 Address shows 169.254.112.76 which I was told is a router IP address even though I am plugged directly from the modem to my PC with an Ethernet cord. So I think that's my problem? But I am not sure.
Sharing 3G Dongle Internet Connection With WiFi Router?
Jan 4, 2012I'm switching from landline ISP to mobile ISP (dongle). So I'm thinking of sharing 3G dongle (ZTE MF190) internet connection with other PC, device etc, through D-Link modem+router(DSL-2640B) that I use for landline internet connection before. Is this possible? I notice that I cannot use homegroup via D-Link anymore after connecting to 3G dongle. I've tried ICS (internet connection sharing) but to no avail.
View 1 Replies View RelatedCannot Connect Via Cable Modem
Apr 17, 2011New computer - Dell Inspiron 15R laptop. Windows-7 home premium 64-bit. Trying to access internet. 7 gives connection option of Broadband where ISP requires ID and Password. However, my ISP does not require this info to log on....its just "plug-n-play" I have run every test and diagnostic that I can find and the only prob I can find is something to do with the DNS, but have no way to fix the problem. The connection is Cable Modem, via LAN wire. One of the diagnostics recognizes my ISP, but still won't let me connect.
View 9 Replies View RelatedCable Modem For Use With Roadrunner?
Aug 27, 2012tw-Roadrunner rents cable modem for 3 bucks/month - What device can I buy that will do a good job of this so I don't pay rent forever, if any?
View 6 Replies View RelatedTypical For A Cable Modem To Be Able To Handle A FAX Or Not?
Nov 10, 2009I rarely need to send/receive a FAX, but I would like to know how before I need to. In the past, I had a dialup FAX modem, but now I'm on cable, and I never thought about FAXing until just now. My printer also has a FAX function, but the only driver available for it on Windows 7 is the one that Windows 7/Windows Update installs.In the Windows FAX/Scan program, the scanner works perfectly, but When I try to creat a new FAX, it says that I need a FAX modem. I have no idea of whether my cable modem is capable of that or not, but when I select to send a FAX, a window appears stating that I need a fax modem or server, but when I select to use a local modem, an error appears saying that I need to contact the administrator (me). From the interface, the only thing that appears to be for setting this up is the Tools>Options menu, but when I click on that, nothing happens.The first question is whether it is typical for a cable modem to be able to handle a FAX or not?
View 9 Replies View RelatedCisco DPC/EPC2100 Cable Modem Drivers
Dec 3, 2009I'm looking for a 64-bit USB Cable Modem driver that works with Vista or Windows 7.
This is my modem:
Cisco DPC/EPC2100 Cable Modem - Support - Cable Modems - Consumer - Cisco
However, none of these drivers seem to work with 64-bit.
I was wondering if there are no drivers available for this specific modem, is there a generic
64-bit USB Cable Modem available that can be used as a replacement? If so, where?
And if I'm happen to be stuck with a 64-bit OS and this modem, is there any other solution
to workaround this problem? Would it be possible to hook up a router so Windows wouldn't
see my cable modem?
Plugging The Printer USB Cable Into The Modem And, In Control Panel?
Jun 24, 2011One desktop PC running Windows 7 Home EditionOne laptop also running Windows 7 Home EditionMy modem is a Thomson TG782TMy printer is an Epson STYLUS Photo RX610I currently print by swapping the printers USB cable to either my desktop or the laptop, no problems.My desktop is cabled to the modem, my laptop is wireless.My modem has a USB port, to which I can successfully plug in a USB memory stick, and use from both the PC and the laptop.I have tried plugging the printer USB cable into the modem and, in Control Panel, installing a new printer using 192.168.1.253 address.The printer appears to have installed ok, but all attempts to print to it have been unsuccessful
View 4 Replies View RelatedDevice Driver Software Was Not Successfully Installed For Cable Modem
Jul 21, 2012When trying to install my USB cable modem (Scientific Atlanta DPC2100R2), I'm always getting a popup message that says "Device Driver Software was not Successfully Installed." I don't even get a "Found New Hardware" message beforehand. I just switched over to Windows 7 Professional 64-bit from Windows XP today, and the modem was working fine earlier (when I was using XP).
When I put the Setup disk that came with my modem, AutoPlay will play it, but I can't set up anything that way. If I go through Device Manager to try and update the driver, I get a message along the lines of "Windows could not find updates." I even get this message when I manually direct it to my D: drive where the disk is.
I've even tried uninstalling the driver from Device Manager, unplugging the USB from my PC, restarting it, and then plugging the USB back in, but I still get the same error.
It really shouldn't be the modem, as it was working fine earlier and I am even using it right now as I type this on my other PC (that runs Windows XP) and it's working fine. Would anyone happen to know how to remedy this?
Network Comes In And Out Sometimes Goes Down Router Or Modem?
Aug 30, 2011Every now and then the internet will stop working on my PCs. I have 2 near me at all times and both will stop working, a wireless lappy and wired desky lol.It will come back in a moment or in a little while. I havent figured out if its the router or the cable modem.
View 3 Replies View RelatedEntering Router Via Modem?
Apr 27, 2012Is there any way to enter a router (e.g. 192.168.15.1) via a cable modem, that is, without having to disconnect the cable modem from the computer and connect the router directly to the computer?
View 4 Replies View RelatedSetting Up A Second Router As A Wireless Access Point?
May 26, 2011I live in the UK and use Sky as my ISP.The wireless router they supply is OK as far as the internet side of things is concerned, but for a good wireless connection to my wife's laptop in the next room, it sucks.I have a spare Netgear DG834N Wireless ADSL2 modem router and was going to use this instead of my Sky router in an effort to improve the wireless range. Unfortunately, Sky's T's & C's insist that using a different router to the one they supplied could result in my internet service being withdrawn.In an effort to prevent people using a third-party router, Sky have encrypted theirs with a username and password (not the username and password used to logon for e-mail etc) that can be retrieved with a hack, but I prefer not to go down that route.What I would like to do is use the Sky router to handle the internet side of things, and then use my Netgear router as a wireless access point to give us better wireless coverage around the house.Is this possible and if so, how do I go about it?
View 8 Replies View RelatedWireless Access Point Added To A Router?
May 26, 2011I currently have the following network configuration:- Broadband Cable Modem (in my den) - Router (in my den) - Computer (in my den) - Wireless Access Point (family room)My broadband cable modem is connected to my router via ethernet cable. I also have an Ethernet cable running from the back of my router directly into my PC. My current setup is in my den (I will explain). In my family room (which is away from the den) I have my television and several other wireless devices (Roku box, etc). My signal strength is low in my family room due to many walls between my den and family room. I therefore installed a Wireless Access Point in my family room by running an Ethernet cable into my basement and connecting the router in the den to the Wireless Access Point in my family room. Now here is my question: I set the SSID (or network name) of the Access Point so that it is the same as my current network name (that way I see the AP on the network). Now here is where I need to understand how a wireless Access Point works. If I have a laptop or other wireless device in my family room and search for a wireless signal, am I connecting to my router (that has a weaker wireless signal than the AP) or to my Access Point (stronger because my Access Point is a foot away from my wireless devices) since they both have the same network name? And if I connect at that strong signal and walk into another room where the signal is weaker, does my laptop automatically connect to the wireless router? How do I tell if both my router an wireless Access Point are using the same SSID or network name. I guess what I'm trying to ask is where am I getting my wireless signal from, the Access Point or the Router or both (assume I am in wireless mode).
View 4 Replies View RelatedResponse From The Wireless Router Or Access Point?
May 18, 2012I am using Windows 7 and Netgear router and trying to set up the wireless network and keep on receiving the message - problem with wireless adpator
Is this a known problem with Netgear WGT624 router?
Trouble Configuring Netgear Router As An Access Point
Nov 12, 2012I am trying to configure a Netgear WNR3500 router to be used as an access point.My AT&T U-Verse Gateway router is in the basement of my house and the WNR3500 is in my office on the second floor of my house. I am using the Netgear Knowledge Base article ID 19852 titled "Set Up a Wireless Router as an Access Point on a Network".In Step 5 is says in Advanced tab Setup > LAN "In the IP Address field, change the LAN IP address of the router (WNR3500) to 192.168.1.100 (same IP segment of the main (AT&T) router (192.168.1.1) and uncheck the DHCP server box.I did that and the wireless access point doesn't work.The AT&T Gateway wireless router IP address is 192.168.1.254. I also tried changing the WNR3500 LAN IP address to 192.168.1.200 and the access point still doesn't work.
View 5 Replies View RelatedSky Router With Out A Adsl Cable?
Feb 19, 2013can i use my sky router with out a adsl cable in
View 2 Replies View RelatedRouter Remote Admin Through Verizon Dsl Modem?
Mar 18, 2012im trying to setup for accessing my external router via remote admin port 8080 which has to jump through the verizon dsl modemthis is what i[CODE]
View 3 Replies View Related
