Setting Up A Second Router As A Wireless Access Point?
May 26, 2011
I live in the UK and use Sky as my ISP.The wireless router they supply is OK as far as the internet side of things is concerned, but for a good wireless connection to my wife's laptop in the next room, it sucks.I have a spare Netgear DG834N Wireless ADSL2 modem router and was going to use this instead of my Sky router in an effort to improve the wireless range. Unfortunately, Sky's T's & C's insist that using a different router to the one they supplied could result in my internet service being withdrawn.In an effort to prevent people using a third-party router, Sky have encrypted theirs with a username and password (not the username and password used to logon for e-mail etc) that can be retrieved with a hack, but I prefer not to go down that route.What I would like to do is use the Sky router to handle the internet side of things, and then use my Netgear router as a wireless access point to give us better wireless coverage around the house.Is this possible and if so, how do I go about it?
View 8 Replies
ADVERTISEMENT
Jan 23, 2012
In a few days time I will be changing my ISP in the UK from Sky to BT.
BT are providing me with their newest wireless router free of charge as part of the deal and I'll be using that to set up my wireless network, which will consist of an HP Pavilion desktop, a Toshiba laptop, a Sony Vaio laptop, an HP wireless printer and a Samsung HDTV.
This means my Sky wireless router is surplus to requirements, so I was wondering if I could convert it to a wireless access point to improve the range of my BT wireless network.
I've read a couple of supposedly easy-to-understand articles on Google and have to say they left me more confused than ever.
View 6 Replies
View Related
May 26, 2011
I currently have the following network configuration:- Broadband Cable Modem (in my den) - Router (in my den) - Computer (in my den) - Wireless Access Point (family room)My broadband cable modem is connected to my router via ethernet cable. I also have an Ethernet cable running from the back of my router directly into my PC. My current setup is in my den (I will explain). In my family room (which is away from the den) I have my television and several other wireless devices (Roku box, etc). My signal strength is low in my family room due to many walls between my den and family room. I therefore installed a Wireless Access Point in my family room by running an Ethernet cable into my basement and connecting the router in the den to the Wireless Access Point in my family room. Now here is my question: I set the SSID (or network name) of the Access Point so that it is the same as my current network name (that way I see the AP on the network). Now here is where I need to understand how a wireless Access Point works. If I have a laptop or other wireless device in my family room and search for a wireless signal, am I connecting to my router (that has a weaker wireless signal than the AP) or to my Access Point (stronger because my Access Point is a foot away from my wireless devices) since they both have the same network name? And if I connect at that strong signal and walk into another room where the signal is weaker, does my laptop automatically connect to the wireless router? How do I tell if both my router an wireless Access Point are using the same SSID or network name. I guess what I'm trying to ask is where am I getting my wireless signal from, the Access Point or the Router or both (assume I am in wireless mode).
View 4 Replies
View Related
May 18, 2012
I am using Windows 7 and Netgear router and trying to set up the wireless network and keep on receiving the message - problem with wireless adpator
Is this a known problem with Netgear WGT624 router?
View 1 Replies
View Related
Jan 5, 2013
I have found a wireless connection near me and connected to it. I saw that my speed is kind of good (about 14 Mb/s), I tried to get this speed higher.I went into the router setup from my browser, and changed some settings from thereOnce changed, I reboot the router to see if it changed my speed.The one setting that blocked my access to internet is MCS. I don't remember if that was off/disabled, but i changed it to MCS7, the last option available for MCS... thing.
View 4 Replies
View Related
Oct 12, 2011
Is there a way to setup your computer to connect only to a specific wireless router in your area? I live in a college dorm and there are a lot of wireless connects available so I'm thinking that there might be complications with my computer with all the information in the air.
View 3 Replies
View Related
Nov 12, 2012
I am trying to configure a Netgear WNR3500 router to be used as an access point.My AT&T U-Verse Gateway router is in the basement of my house and the WNR3500 is in my office on the second floor of my house. I am using the Netgear Knowledge Base article ID 19852 titled "Set Up a Wireless Router as an Access Point on a Network".In Step 5 is says in Advanced tab Setup > LAN "In the IP Address field, change the LAN IP address of the router (WNR3500) to 192.168.1.100 (same IP segment of the main (AT&T) router (192.168.1.1) and uncheck the DHCP server box.I did that and the wireless access point doesn't work.The AT&T Gateway wireless router IP address is 192.168.1.254. I also tried changing the WNR3500 LAN IP address to 192.168.1.200 and the access point still doesn't work.
View 5 Replies
View Related
May 11, 2012
I am having a hard time configuring my Access point. I have a DSL Router connected to our telephone line and it works fine wirelessly, Yesterday I purchased TP LINK Router to configure as Access Point to extend wireless signal up to the second floor. Now, I am wondering, should I do some re-configuration on my DSL Router before configuring my TP Link Router? Guys, Please share your thoughts and if you have knowledge on how to configure my 2nd Router to my WifiNOTE: I followed the user guide manual that came with my TP LINK router but it is no USE. I just need to know if should I reconfigure my 1st Router in order to communicate with my 2nd Router.
View 4 Replies
View Related
Feb 19, 2012
This question may not be what you think it is. I am trying to fix an intermittent issue in my home environment. The issue is I am having to use wireless. Our Xfinity Cable/WAP modem sits on the top floor of our house. I am located in the basement. The wireless signal I get most of the time is very good, and by very good i mean at least 15+ mb/s on [URL]
I am taking the Cisco Network Academy classes and am familiar with network terminology and concepts. However, what I'm trying to do is take a router/WAP (using it downstairs where I'm located) and configure it to access our xfinity modem upstairs, so that I can plug in to it downstairs using a RJ-45.
Let me know what yall think. By the way the router/wap i would be using is a netgear model unknown at this moment but could easily find out.
View 4 Replies
View Related
May 23, 2011
I am on a cabled LAN network with internet access. I can also access the internet through a different wireless router. When I am connected to the LAN by internet access is also through it. I would like to stay connected to the LAN network but at the same time have the internet access through the wireless. Is there a way to set this up?
View 5 Replies
View Related
Feb 20, 2013
To view Netflix or Amazon movies which type of router am I better off with?
View 3 Replies
View Related
Oct 22, 2011
can't connect to internet it says connection between access point router or cable modem and internet is broken
View 4 Replies
View Related
Mar 1, 2011
i have a 1800 gateway sbc router. how do i connect to it
View 1 Replies
View Related
Jan 24, 2012
I am having problems with my wireless adapter Cisco Router Linksys X2000, can I use it as a wired router into my network socket on the computer?
View 3 Replies
View Related
Jul 7, 2011
Is it possible to set up a workgroup between two computers without connecting them with a crossover cable or setting it up over a wireless network?
View 4 Replies
View Related
Oct 19, 2012
how to configure my wireless router WNR500 to my existing wireless network
View 1 Replies
View Related
Nov 20, 2011
Just ordered the following router: TP-Link TL-WA901ND Advanced Wireless N Access Point: Amazon.co.uk: Computers & Accessories I have a garden shed 30 metres away so hopefully 802.11n should be able to reach. The aim is to use 802.11n so speed is better in my house and my shed. However I heard that 802.11g dongles and computers limit the network speed if you connect them to a router running 802.11n. (Can you do this?)So I might try running 802.11n on the new router (in the main house) and running an ethernet cable down from the new router to the shed where I will have my old Belkin (g) router running 802.11g (as a new access point, if you can do this- if not what are my options)On Amazon, this is the cheapest wire I could find but its not external so will it get damaged quickly if I have it exposed (will burying it underground make a difference?): High Quality 40M CAT5e RJ45 Ethernet Network Fast LAN: Amazon.co.uk: Electronics
View 5 Replies
View Related
Feb 5, 2011
I'll try to be detailed on this. I've worked on it and read on it for almost 7 hours and I'm stuck. I'm using a Win 7 Pro desktop that is hardwired and a Win 7 Home Premium laptop wireless. Both current on all updates.My Comcast modem is hooked into a WRT160N that is hardwired to a WRT400N which is being used as an access point, and to the desktop PC. Both routers have the latest firmware. Both routers have the same SSID and password but use different channels. (2 & 6) Internet works perfect both wired and wireless through both routers.The homegroup has been set up through the desktop but I've removed and added homegroups on both machines multiple times. My problem doesn't go away. The homegroup works when the laptop is either wired or wireless using the WRT160N. It will not work at all through the WRT400N. I can be in the room with the WRT160N on the homegroup, when I move to the other router so the wireless switches to the WRT400N, it drops the homegroup. The internet stays connected just fine. Once it drops the homegroup, it can't find it until I go back to the main router.Both machines have IPv6 addresses, auto discovery is on.
View 1 Replies
View Related
Sep 15, 2012
I am currently using internet on DSL on Local Area Connection. It is not a dial up connection. I also have a WiFi access point. Now, I want my all the applicatons like browsers, Yahoo, Live Messenger etc. to use internet through LAN as usual but there is this application for which I want to use internet for through WiFi, not LAN. Just like Proxy Firewall, you choose for different applications the different proxies. Like this, I want different connections for different applications.
View 3 Replies
View Related
Dec 25, 2011
how to access the secure WEB encryption wifi accesspoint?
View 2 Replies
View Related
Jul 25, 2012
I want to set up a Hot spot for my iPad on my wired internet at work. I have followed all of the steps to set up my ad hoc network but when i hit "NEXT" to actually set up the network it simply says "WINDOWS CANNOT SET UP "network name" ....Am i missing something?
View 2 Replies
View Related
Apr 30, 2012
I recently purchased a new HP PC w/ Windows 7 Home Premium [64-bit] OS.When I ordered this computer from HP, it was supposed to come with a wireless internet card. However, the manufacturer made a mistake and did not install any card. I called and complained, now HP has sent me the following product:Linksys WMP600N Dual-Band Wireless-N PCI Adapter now onto setting up the connection....I did install a NETGEAR wireless card on the back of my old PC, about 6 years ago, so I think I should be able to install this card, however I did read some people have problems with the drivers on this card. Also, at my old apartment where I had wireless internet the first time, the landlord and maintenance people managed everything for providing the signal, so I don't really know anything about setting up router, signal, connection, etc.
Right now the primary internet connection in this house comes through the cable+phone company. There is an RCA Thompson Digital/Broadband modem or router or something, model #DHG535-2, and from there the connection plugs through ethernet cable into the Apple Mac that I'm using to type this right now.My new PC is in another room, and I will install that Linksys wireless card and use that PC most of the time. What I would like help with is:
1. What steps must I take to install the new PC
2. Do I need to get a wireless router, and if so, which ones will work best with the wireless card I received
etc. etc.I think I found my old NETGEAR wireless router, model number MR814v2(??), but I bought this 6 years ago and don't know whether it will work well or at all with the new dual-band card.
View 3 Replies
View Related
Dec 5, 2009
With my Windows 7 residing on it's own on a new SSD drive, now I want to be able to fully access my 2nd drive, my old XP drive from the default Admin acct. created on Windows 7 initial install.
I can read from the 2nd HDD, copy to the new drive, but can't read / write, it just says I don't have permission.
My research so far reveals this TrustedInstaller does not give full blown permissions to a 2nd drive in a situation like this. I am thinking there has to be a way around this without having to be logged in as the built-in Admin always. I just haven't found it yet. It's rather confusing this security and file permissions. I ran into this problem with XP before when I took and switched out disks, and I just had to reset the permissions globally for the entire disk somehow.
I might log in again as the built-in admin and see if it gives me options to change settings for the acct. I think that is the way...
View 4 Replies
View Related
Jun 3, 2011
I was wondering to myself in Wal-Mart if I should get myself one of those USB routers for my Nintendo DSi, PSP and laptop computer. I mean I would love to have one so i can use the browsers in them and for updating/online gaming. but at the same time I think that since I have dial up it would be a waste of money to buy something that SHOULD be used on a cable/satellite connection. I was wondering if I could get your opinion on the matter, cause I can't come up with an answer myself.
View 1 Replies
View Related
Jul 15, 2009
I just completed a new windows 7 64 build and would like to purchase a wireless adapter for my "dream machine." My router is a buffalo WHR-G54S "g" router. I do not have any "n" wireless in my home yet. Any suggestions for something that has proven to be stable and trouble free with windows 7 x64?
View 1 Replies
View Related
Dec 4, 2012
I have just done my quarterly full system wipe on my laptop,and have lost my little sticker with the router details on.Is there any way of finding out what wpa key is by going into the 192.168------ router set up number?
View 6 Replies
View Related
Feb 6, 2011
I finally got Windows 7 reinstalled again, but now I can connect to my wireless router.
I tried setting up a new wireless network, for some reason it's trying to do a WAN miniport (PPPOE)
That doesn't look familiar from before? But either way once I enter username & password it isn't connecting?
View 2 Replies
View Related
Jun 21, 2012
I recently built my own gaming pc, spec'd as follows:
Asus Rampage IV Formula
Win 7 Ultimate 64 bit
I73930k
GTX 680
120gb ssd
etc.
I have installed Win 7 Ultimate 64 bit with no real problems. Except the internet connection! I have Sky Broadband which has a Sky router. I can connect my laptop wirelessly so i know it works ok. The only way my 'new' desktop will connect to the Sky router is by using an Ethernet cable. It simply cannot connect to it wirelessly.
View 1 Replies
View Related
Jun 25, 2012
My Comcast router is wireless and I would like to use my old Netgear router to receiver the signal so that I can use two computers in my basement that do not have wireless cards. Can the router be setup to receive the signal and distribute it even though it was designed to do the opposite?
View 9 Replies
View Related
Oct 19, 2012
I've just bought a new wireless router as we were having trouble with our old one cutting out etc, the only problem is with the new wireless router it keeps saying DNS isn't responding and there is no interent access but the wireless connects to the computers, but then if we plug our old one back in it connects straight away
View 2 Replies
View Related
Mar 17, 2011
I have a new pc by HP,using windows 7.I do not have a wireless router, I have a modem from my ISP. Hughesnet.com, address is 192.168.0.1.Why do I keep getting messages about a wireless router. I
m just trying to connect to HughesNet.What should I do?
View 2 Replies
View Related