Can't Connect Net Using Mobile Modem - It Says Modem Not Found
Dec 2, 2011i am using n73 mobile to connect to the internet...ut now a days it couldnt get connect....it says modem not found....
View 2 Repliesi am using n73 mobile to connect to the internet...ut now a days it couldnt get connect....it says modem not found....
View 2 RepliesHuawei e156g Mobile Broadband USB Stick
HP Pavilion dv7 2070ea
Windows 7 Professional 64bit
The laptop came preinstalled with Vista Home 64bit and i was able to use the mobile broadband without any issues.
I have installed Windows 7 Pro 64 in a dual boot config and it runs fine on wired or wireless connections, but when i try to use the mobile broadband i run into issues.
After the modem driver and software install and a few restarts I was able to get all the devices in the device manager to be happy, and i was able to connect via the 3 Connect software and access the internet. But after a few minutes Windows will inevitably lock up, regardless of what program is being used. The screen will freeze, there will be zero harddrive activity and the only course of action is to hold down the power button
The mobile broadbands company site says that the vista drivers should be happy on windows 7, but something isnt happy.
I really need to resolve this as my mobile broadband allows me to connect to various servers for work via its allowed IP address.
Is this the modem, the USB bus or something else?
I have checked the event log and there isnt anything useful in there.
i am pradhap, i am using a mobile that contains wifi. it performs wifi wireless n/w and a modem. so how to access wifi connection form my mobile to windows7
View 1 Replies View RelatedI have a laptop and regular computer and a new modem sent by comcast also a wireless modem. I can only get one to work. what am i doing wrong?
View 3 Replies View Relatedi got problem with my mobile dial up modem, the modem was detected on device manager, and queryable on the modem properties itself, but i dont know why my modem cant be found when i try to create new dial up connection. i try to research over google and found, it could be the telephony problem, and yes when i try to open phone & modem control panel, then the error showed Code: phone and modem control panel can not be opened. you may have a problem starting telephony service , then i try to restaring the telephony service on windows services, i dont know why this problem occured, cause yesterday everything is just fine...
View 5 Replies View RelatedI have bought an Acer Aspire One a751h with an integrated 3G modem. I received it with a fresh install of Windows 7 and I cannot get the integrated 3G modem to work. I click on the Acer internet manager and it says the modem is not found. The 3g switches on fine and it's lit up so all ready to use but it cannot find the modem. What I need to install and add instructions on what I need to do because I've downloaded several drivers to try and none have worked, although I must admit I'm not sure what to do once they are extracted from a zip file?
The info on the side of the box is as follows:-
A0751h - 52BGk MODEL NO: ZA3
CPU: Intel Atom Processor Z520
RAM: 1GB DDR2 STORAGE 160GB
Operating System:- Windows 7 Ultimate Service Pack 1
Installed Memory (RAM): 2.00 GB
System type: 32-bit Operating System
I had been using internet with the help of USB CDMA Modem whose image have been attached below, in my PC with Windows XP SP3 (x32) previously. I don't actually remember the name of the manufacturer's; may be its 1X CDMA Modem! Now I purchased a Dell Laptop with x64 core i5 processor and now the software provided with the modem (in its driver CD) isn't compatible with my Windows 7 Home Premium. So I can't use internet in my new laptop...and I don't want to continue using internet in my old PC which has very inferior configuration! In fact even the dialler software provided in the same CD was not installed unless I disabled my anti-virus i.e. Microsoft Security Essentials!
View 1 Replies View Relatedjust last night after i was finished playing skyrim for the night, i saw on steam that i had no connection. so i looked towards the internet bars icon next to the clock and saw a yello triangle with a "!" in it. so i disconnected and reconnected but still the yellow "!". so i just decided i would try again tomorrow (today).when i woke up today it didn't have that error, so i decided to go to Internet on chrome, but it had that "webpage not available" (wouldn't work for ie either). i figured it would soon fix itself like it always had, so i tried playing mw3 on my xbox, but it wouldn't connect to live either o.o and when my mom wanted to watch netflix on the living room xbox, she couldn't connect either! then i figured out it was definatly my modem that was refusing to connect to anything.
View 9 Replies View RelatedI'm having problems with my computer the OS is windows 7, Home Premium. It will not connect wirlessly to the modem. When i try to connect i get the error message "No connection available". When i first got the computer it worked fine but just suddenly stopped working for no apparent reason. My computer is still as it is at the start i have not installed any new programs. My computer is a Advent Roma 2000.
View 2 Replies View RelatedNew computer - Dell Inspiron 15R laptop. Windows-7 home premium 64-bit. Trying to access internet. 7 gives connection option of Broadband where ISP requires ID and Password. However, my ISP does not require this info to log on....its just "plug-n-play" I have run every test and diagnostic that I can find and the only prob I can find is something to do with the DNS, but have no way to fix the problem. The connection is Cable Modem, via LAN wire. One of the diagnostics recognizes my ISP, but still won't let me connect.
View 9 Replies View RelatedSince yesterday I can't connect to the modem with my desktop pc(windows 7 x64). I get APIPA as IP adress(169.254.*.*). Tho I could go on internet with my notebook with the cable I use for desktop PC.
this is how my connection looks like. I got only modem & switch between my connection to the internet. note: I have no fileserver.
I've checked the following things with my other PC(=notebook windows 7 x86): modem, switch, cable and my network card and everything did work fine. note: I did use the same cable as I was using for the desktop PC to be sure that the cableline was fine. I made the next tests with my desktop PC.
Then done the next ones without success:system restore(1 week)winsock fixreinstalling the networkcardgiving static IP adress
My network card settings are the same for the both PC, set to automatically obtain IP address and DNS server addresses
ipconfig /all of my desktop pc.(not working) Code: Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
[Code].....
I have Windows 7 64 bit. I bought a Netgear DGN2000 approximately two years ago. It is working well. Currently, there is good connectivity between my laptop and the modem/router (wired and wireless).
I worked on my desktop this morning, uninstalled some programmes, but must have uninstalled a driver or something. I inserted the Resource CD, which installs the modem (although it is installed). Then it stalls at some point. If I troubleshoot, it states Windows do not detect a properly installed network adaptor.
I have a desktop computer connected to a wireless modem through an ethernet cable. My laptop is connected to the modem using wifi. Is there any way to connect the two computersThis my network map:
View 4 Replies View Relatedmy pronet modem not connected to windows 7 i install s/w that provided me with pronet modem before that i use windows professional that time i easily connect in our hostel wi-fi router but after installation windows 7 my pronet modem not detected in my pc
View 1 Replies View Relatedhow to connect 2 compute .1 is laptop and the other is desktop using bsnl broad band modem type 1 which have 4 port plus 1 usb port . so that both the computer has networking and internet connection.
View 2 Replies View RelatedI use wired connection (LAN) for connecting. All lights, including Power,LAN, DSL, and internet glow on the router. The small Network Access icon on the task bar shows that the computer has internet access. But I will still not be able to connect.
View 3 Replies View RelatedMy sons set me up with my old pc an new pc sharing my hdtv as a monitor. Wires came loose wile I was trying to re-arrange and now only one pc is seen when I choose inputs. is there a good link that shows the wiring diagram for modem, router, pc, tv, dvr...?
View 1 Replies View RelatedMy step dad has recently brought himself a new PC with windows 7 on it. So he now has 2 external drives he wants to use but when I plug them in they dont show up. What have I got to do to make them show up?
View 15 Replies View RelatedHow do i connect 2 computers to the same modem using dlink switch so that i get internet connection in both the PC`s.
View 3 Replies View RelatedI had an existing pc with windows xp home. I just purchased a new pc with windows 7 home. Why I connected the windows 7 pc to the internet using dlink router I was able to access the internet. On the next day though, when I tried to connect again, I was not able to access the internet. Here are the tasks that I have already carried out to check the connectivity.
1. The windows 7 computer has a valid IP address, which means that ARP is working fine and my router is dispensing the addresses correctly.
2. When I try to ping the modem-router, there is no reply. So I am not able to access router using ICMP.
3. My old windows xp pc is able to connect and browse the internet. The problem is only with my new windows 7 pc.
My desktop (windows 7 ultimate 64bit) has been able to connect fine to the internet until I got home from work this morning. My laptop is connecting to the same modem fine through wireless (along with my wii). The modem I am using is Motorola SB 901. When I rightclick my connection on my desktop and hit troubleshoot problems, I get 'local area connection 2 doesn't have a valid ip configuration'. Same thing happens when I switch the ethernet cord to local area connection 1. When I go to control panel, network and internet, network and sharing, the connection map at the top stops between my pc and the network (which is now labeled as 'unidentified network'). Here is a list of what I have done so far to try and resolve the issue:
1. Replaced the ethernet cord with one I know is working
2. Full scanned my pc for viruses
3. Disabled all firewalls and virus protection programs
4. Restored my pc to a previous save state
5. Reset winsock with cmd via these prompts: netsh winsock reset catalog and netsh int ip reset reset.log hit
6. This attempt is unfinished as I am getting stuck. I am attempting to setup a static ip to attempt to resolve the issue, but when I open cmd and type ipconfig/all, the default gateway under my local area connection is completely blank.Here is what comes up with ipconfig/all:
C:UsersPaul>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Paul-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code]....
my system cannot connect bsnl lan connection. i had software error in my system so i formatted os after thaaaat i trie to install modem cd but it cannot installed.i also tries 198.168.1.1 techinque but it hang out.how to connect it?. i am using window 7.
View 1 Replies View RelatedFor some reason my router and modem will not show correctly on my dell inspirion one desktop. Im running windows 7 and here are the net work connection deatils
Connection -specific DNS Belkin
Description Realtek PCIe GBE Family Controller
Physical Address 00-00-00-00-00-00
DCHP Enabled Yes
Ipv4 Address 192.168.2.2
Ipv4 Subnet Mask 255.255.255.0
Lease obtained Wednesday, November 10, 2010 9:45 PM
Lease Expires Sunday, December 18, 2146 4:17 AM
IPv4 Default Gateway 192.168.2.1
Ipv4 DHCP Server 192.168.2.1
Ipv4 DNS Server 192.168.2.1
IPv4 WINS Server
NetBIOS over Tcpip enabled Yes
The Connection was working about ten days ago and then suddenly stopped and read as an unidentified network no internet access. at one point is was not receiving packets but now it is but it still says no internet access on the IPv4 Connectivity. Media state is also enabled and the speed is 100.0 Mbps when i troubleshoot it says windows cant identify problem but in the details it says default gateway is available. when i use the cmd prompt ipconfig/all my local ethernet adapter has a physical address of all zeros.
I am using Micromax 300c EVDO modem ( Datacard ) for wireless broadband connection. In one machine having Intel 915 Chipset motherboard, it is working fine. In the device manager, in the modem category, it shows correctly as " CDMA 2000 Rev A Modem ". In another machine, having Intel DG41TY motherboard, the device manager does not show modem. Only in other devices category, shows as Data services. ( in ports category both diagnostic and service ports are shown correctly)
View 4 Replies View RelatedI hv been using Windows 7 for 2yrs on my HP DV6502AU Laptop, using vista's drivers for the same, everything was fine bt few days back its sound went off with a cross mark on the sound icon. I triesd to reinstall the drivers bt it shows "cannot find the media device for this driver". So i formatted my laptop and installed windows 7 again to check whether it will work or not. And the bad luck followed, now modem driver is showing the same"cannot find the modem device for this driver".
View 3 Replies View RelatedI can't connect to the internet on my desktop pc after I reinstalled windows. I have linksys wrt320n router and I can connect to it only by wi-fi. When I try to install router's setup wizard or network magic - it writes that my computer is not connected to router though it is connected in the same way as it was before. In the LOCAL AREA CONNECTION it is also written that network cable is unplugged...I also tryed to connect just internet cable without router - PC also didn't react. Maybe the problem is that my network adapter (nvidia nforce) is without appropriate drivers? Cause I can't find drivers for nvidia nforce networking contoller for windows 7.
View 2 Replies View RelatedI have one USB modern,how can i configure to be used by two computers??
View 2 Replies View RelatedI cannot get any fax software to see the modem. I used the windows fax program and I think after an windows update this is not working. I have windows home premiun
View 5 Replies View Relatedi have two OS install in my PC. one is win xp in c: drive and another is win 7 ultimate 64 bit OS in e: drive.my modem is teracom. from my windows xp i could successfully set up broadband connection and could connect internet but when i try to establish internet connection from win 7 then i am getting error like modem not recognize.
View 4 Replies View RelatedI recently purchased a small usb fax modem from ebay. It is a simple device, with a usb connector on one end, and a receptacle for a telephone line on the other end. So obviously, this is not difficult to "install". But my problem concerns getting the correct drivers installed. The unit came with a mini-cd-rom which has some drivers. But there are no instructions. It also contained a "Read Me" file, but unfortunately this was i Chinese and I couldn't read it.
The computer specs :
HP200-5120IS, (All-in-one )
Microsoft Windows 7 Home Premium 64-bit Edition
Intel Pentium E5400 / 2.7 GHz, Dual-Core
64-bit Computing
Cache Memory Per Processor 2 MB
4.0 GB, DDR3 SDRAM
Hard Drive 500.0 GB -7200 rpm
DVD-RW (R DL) / DVD-RAM - Serial ATA
LCD display - TFT active matrix, 21.5 in
Graphics - Integrated GMA X4500HD
USB modem Samsung sgh-z810 works in Windows 7.
1. connect modem to USB, install all required drivers and software (if don't work, use compatibility mode with Windows XP)
2. install VMware Workstation
3. install Windows XP on VMware Workstation
4. run XP and install all required drivers and software for modem (it's automatic)
5. now you have internet on running Windows XP on VMware Workstation
6. disconnect from internet on Windows XP
7. run connection manager on Windows 7
8. and now trick, add new HW (VM>Settings>Add>Network Adapter>Host-only>Finish) Network Adapter
9. wait few seconds and connection manager find modem on windows 7 (WTF?)
10. now, you can connect to the internet using connection manager in Windows 7
11. close VMware Workstation and enjoy ;-)
I don't know how it's possible, but it works! Cheers!