my pronet modem not connected to windows 7 i install s/w that provided me with pronet modem before that i use windows professional that time i easily connect in our hostel wi-fi router but after installation windows 7 my pronet modem not detected in my pc
View 1 Replies
i am using n73 mobile to connect to the internet...ut now a days it couldnt get connect....it says modem not found....
View 2 Replies View Relatedjust last night after i was finished playing skyrim for the night, i saw on steam that i had no connection. so i looked towards the internet bars icon next to the clock and saw a yello triangle with a "!" in it. so i disconnected and reconnected but still the yellow "!". so i just decided i would try again tomorrow (today).when i woke up today it didn't have that error, so i decided to go to Internet on chrome, but it had that "webpage not available" (wouldn't work for ie either). i figured it would soon fix itself like it always had, so i tried playing mw3 on my xbox, but it wouldn't connect to live either o.o and when my mom wanted to watch netflix on the living room xbox, she couldn't connect either! then i figured out it was definatly my modem that was refusing to connect to anything.
View 9 Replies View RelatedSince yesterday I can't connect to the modem with my desktop pc(windows 7 x64). I get APIPA as IP adress(169.254.*.*). Tho I could go on internet with my notebook with the cable I use for desktop PC.
this is how my connection looks like. I got only modem & switch between my connection to the internet. note: I have no fileserver.
I've checked the following things with my other PC(=notebook windows 7 x86): modem, switch, cable and my network card and everything did work fine. note: I did use the same cable as I was using for the desktop PC to be sure that the cableline was fine. I made the next tests with my desktop PC.
Then done the next ones without success:system restore(1 week)winsock fixreinstalling the networkcardgiving static IP adress
My network card settings are the same for the both PC, set to automatically obtain IP address and DNS server addresses
ipconfig /all of my desktop pc.(not working) Code: Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
[Code].....
i am aniket i install windows 7 but now my pronet not connected to my pc
View 1 Replies View RelatedI had an existing pc with windows xp home. I just purchased a new pc with windows 7 home. Why I connected the windows 7 pc to the internet using dlink router I was able to access the internet. On the next day though, when I tried to connect again, I was not able to access the internet. Here are the tasks that I have already carried out to check the connectivity.
1. The windows 7 computer has a valid IP address, which means that ARP is working fine and my router is dispensing the addresses correctly.
2. When I try to ping the modem-router, there is no reply. So I am not able to access router using ICMP.
3. My old windows xp pc is able to connect and browse the internet. The problem is only with my new windows 7 pc.
my system cannot connect bsnl lan connection. i had software error in my system so i formatted os after thaaaat i trie to install modem cd but it cannot installed.i also tries 198.168.1.1 techinque but it hang out.how to connect it?. i am using window 7.
View 1 Replies View RelatedI'm having problems with my computer the OS is windows 7, Home Premium. It will not connect wirlessly to the modem. When i try to connect i get the error message "No connection available". When i first got the computer it worked fine but just suddenly stopped working for no apparent reason. My computer is still as it is at the start i have not installed any new programs. My computer is a Advent Roma 2000.
View 2 Replies View RelatedNew computer - Dell Inspiron 15R laptop. Windows-7 home premium 64-bit. Trying to access internet. 7 gives connection option of Broadband where ISP requires ID and Password. However, my ISP does not require this info to log on....its just "plug-n-play" I have run every test and diagnostic that I can find and the only prob I can find is something to do with the DNS, but have no way to fix the problem. The connection is Cable Modem, via LAN wire. One of the diagnostics recognizes my ISP, but still won't let me connect.
View 9 Replies View RelatedI have Windows 7 64 bit. I bought a Netgear DGN2000 approximately two years ago. It is working well. Currently, there is good connectivity between my laptop and the modem/router (wired and wireless).
I worked on my desktop this morning, uninstalled some programmes, but must have uninstalled a driver or something. I inserted the Resource CD, which installs the modem (although it is installed). Then it stalls at some point. If I troubleshoot, it states Windows do not detect a properly installed network adaptor.
I have a desktop computer connected to a wireless modem through an ethernet cable. My laptop is connected to the modem using wifi. Is there any way to connect the two computersThis my network map:
View 4 Replies View Relatedhow to connect 2 compute .1 is laptop and the other is desktop using bsnl broad band modem type 1 which have 4 port plus 1 usb port . so that both the computer has networking and internet connection.
View 2 Replies View RelatedI use wired connection (LAN) for connecting. All lights, including Power,LAN, DSL, and internet glow on the router. The small Network Access icon on the task bar shows that the computer has internet access. But I will still not be able to connect.
View 3 Replies View RelatedMy sons set me up with my old pc an new pc sharing my hdtv as a monitor. Wires came loose wile I was trying to re-arrange and now only one pc is seen when I choose inputs. is there a good link that shows the wiring diagram for modem, router, pc, tv, dvr...?
View 1 Replies View RelatedMy step dad has recently brought himself a new PC with windows 7 on it. So he now has 2 external drives he wants to use but when I plug them in they dont show up. What have I got to do to make them show up?
View 15 Replies View RelatedHow do i connect 2 computers to the same modem using dlink switch so that i get internet connection in both the PC`s.
View 3 Replies View RelatedMy desktop (windows 7 ultimate 64bit) has been able to connect fine to the internet until I got home from work this morning. My laptop is connecting to the same modem fine through wireless (along with my wii). The modem I am using is Motorola SB 901. When I rightclick my connection on my desktop and hit troubleshoot problems, I get 'local area connection 2 doesn't have a valid ip configuration'. Same thing happens when I switch the ethernet cord to local area connection 1. When I go to control panel, network and internet, network and sharing, the connection map at the top stops between my pc and the network (which is now labeled as 'unidentified network'). Here is a list of what I have done so far to try and resolve the issue:
1. Replaced the ethernet cord with one I know is working
2. Full scanned my pc for viruses
3. Disabled all firewalls and virus protection programs
4. Restored my pc to a previous save state
5. Reset winsock with cmd via these prompts: netsh winsock reset catalog and netsh int ip reset reset.log hit
6. This attempt is unfinished as I am getting stuck. I am attempting to setup a static ip to attempt to resolve the issue, but when I open cmd and type ipconfig/all, the default gateway under my local area connection is completely blank.Here is what comes up with ipconfig/all:
C:UsersPaul>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Paul-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code]....
For some reason my router and modem will not show correctly on my dell inspirion one desktop. Im running windows 7 and here are the net work connection deatils
Connection -specific DNS Belkin
Description Realtek PCIe GBE Family Controller
Physical Address 00-00-00-00-00-00
DCHP Enabled Yes
Ipv4 Address 192.168.2.2
Ipv4 Subnet Mask 255.255.255.0
Lease obtained Wednesday, November 10, 2010 9:45 PM
Lease Expires Sunday, December 18, 2146 4:17 AM
IPv4 Default Gateway 192.168.2.1
Ipv4 DHCP Server 192.168.2.1
Ipv4 DNS Server 192.168.2.1
IPv4 WINS Server
NetBIOS over Tcpip enabled Yes
The Connection was working about ten days ago and then suddenly stopped and read as an unidentified network no internet access. at one point is was not receiving packets but now it is but it still says no internet access on the IPv4 Connectivity. Media state is also enabled and the speed is 100.0 Mbps when i troubleshoot it says windows cant identify problem but in the details it says default gateway is available. when i use the cmd prompt ipconfig/all my local ethernet adapter has a physical address of all zeros.
I have a laptop and regular computer and a new modem sent by comcast also a wireless modem. I can only get one to work. what am i doing wrong?
View 3 Replies View RelatedCan anyone advise how I would go about fixing this. I am trying to connect to a network (I have a dell running on windows 7) and it keeps telling me that windows is unable to connect to the network-this is before I can even enter the security key. I know it is not a problem with the wireless because other people are able to connect to it fine.
View 2 Replies View Relatedi have two OS install in my PC. one is win xp in c: drive and another is win 7 ultimate 64 bit OS in e: drive.my modem is teracom. from my windows xp i could successfully set up broadband connection and could connect internet but when i try to establish internet connection from win 7 then i am getting error like modem not recognize.
View 4 Replies View RelatedI found a link to this but it was 459 days ago.Suggested starting a new thread.I discovered my original PC usb modem (circa 2001) so I tried the set-up procedure and it informs me my fax is installed correctly.I tried to send to my own number, before I set-up receive faxes.I also tried to send to "fax toy" just to test the set-up.All give the message "pending".I have connected to the same telephone connection as my home phone.
View 1 Replies View RelatedI have a Smartlink 56K PCI modem. I'm assuming there are no 64 bit drivers. any PCI or USB modems that will work with Windows 7 64 bit?
View 9 Replies View Relatedwhere i can get the driver for usb modem driver for windows 7
View 1 Replies View RelatedUsb modem driver for PC windows 7?
View 2 Replies View RelatedI have bought an Acer Aspire One a751h with an integrated 3G modem. I received it with a fresh install of Windows 7 and I cannot get the integrated 3G modem to work. I click on the Acer internet manager and it says the modem is not found. The 3g switches on fine and it's lit up so all ready to use but it cannot find the modem. What I need to install and add instructions on what I need to do because I've downloaded several drivers to try and none have worked, although I must admit I'm not sure what to do once they are extracted from a zip file?
The info on the side of the box is as follows:-
A0751h - 52BGk MODEL NO: ZA3
CPU: Intel Atom Processor Z520
RAM: 1GB DDR2 STORAGE 160GB
Operating System:- Windows 7 Ultimate Service Pack 1
Installed Memory (RAM): 2.00 GB
System type: 32-bit Operating System
As reported elsewhere, I had some issues with my Win 7 installation which involved more fiddling than needed but most everything is working again. Why more than needed? In the list of possible solutions, I was given the one that fixed the big problem last. C'est la vie. Now, I get to fiddle with fixing little problems. The latest is that Windows Fax and Scan are no longer workingI have a modem in my computer solely for when I send faxes. With the way that they keep eliminating slots on motherboards, I don't know what I'll do when I upgrade but that's neither here nor there. Back to the story.
A couple weeks ago, I sent a fax without any issues. Today, I needed to send one and Window Fax and Scan couldn't find the modem. When I click on "Connect to a fax modem" I get "an error occured. Please try the operation later."I opened a console and sent some AT commands to the modem and it responded. Off hook, on hook, dial. It is set as COM 3. I do have a Bluetooth dongle that is COM 6.Before Win 7, I used WinFax Pro. I had been using WinFax for years and years and never had a problem. However, WinFax Pro doesn't work with Win 7. One last question. When I started up WFS, it no longer shows my previously sent faxes. Where are those hidden?
I have windows 7 64 bit Asus computer with realtek PCIe GBE family controller Tuesday I had internet. Went to load a programand it wanted to reboot and do chkdisk. When it booted back up no internet.It is a DSL Motorola modem through At&T The Ethernet light does not come on. At&T tech support said it was the modem and sent a new one but still having the same problem. The indicator lights on the back of thecomputer are blinking so at least there is power to the card?
View 3 Replies View RelatedI recently changed my modem from a ubee to a motorola surfboard SB6141, I have two desktop computers one with windows 7 home premium 64 bit and the other is XP Pro X64 edition plus a toshiba laptop with windows7 home premium 64 bit. the only computer that will get a ip address is my XP desktop and my sons PS3 both windows 7 computers will not grab a ip address from the surfboard. I have been on the phone with comcast and they have no clue on my issue, they say since these are my modems and not leased ones from them that they will have to charge me if I have a tech out to the house, Why will these computers not grab a dynamic address from the surfboard or comcast.
View 8 Replies View RelatedI have internet connection using by D-Link DFM-562IS internal modem with window xp.now,I have changed window 7 that is not support.
View 3 Replies View Relatedhow to configure a dial up modem in windows 7??
View 1 Replies View Related
