how to connect 2 compute .1 is laptop and the other is desktop using bsnl broad band modem type 1 which have 4 port plus 1 usb port . so that both the computer has networking and internet connection.
View 2 RepliesI have a desktop computer connected to a wireless modem through an ethernet cable. My laptop is connected to the modem using wifi. Is there any way to connect the two computersThis my network map:
View 4 Replies View RelatedHow do i connect 2 computers to the same modem using dlink switch so that i get internet connection in both the PC`s.
View 3 Replies View RelatedWell yesterday after playing online games and surfing the web, so then i decided to go to bed and my laptop took longer than before so i then clicked cancel and tried refreshing i then shut down my laptop and it seems fine. But now today i turned on my laptop and it seems fine until i login when i log in it shows a black screen with only my cursor in the middle but i can still move my mouse around (this never happened before) then it goes to the desktop screen and my icons and gadgets were starting really slow but they came up in the end but then i look at my wifi conection it says No internet accsess but i looked over to my internet modem the internet was on. So then i opened the other laptop and i can use the internet, so i tried restarting my laptop and it did the black screen thing again and still no internet accsess. So I then switch to Safe mode networking and i can connect to the internet just fine i then went and looked at the Device manager and clicked on System devices and theres a yellow triangle with an exclamation mark on Consumer IR Devices.
View 13 Replies View RelatedMy desktop (windows 7 ultimate 64bit) has been able to connect fine to the internet until I got home from work this morning. My laptop is connecting to the same modem fine through wireless (along with my wii). The modem I am using is Motorola SB 901. When I rightclick my connection on my desktop and hit troubleshoot problems, I get 'local area connection 2 doesn't have a valid ip configuration'. Same thing happens when I switch the ethernet cord to local area connection 1. When I go to control panel, network and internet, network and sharing, the connection map at the top stops between my pc and the network (which is now labeled as 'unidentified network'). Here is a list of what I have done so far to try and resolve the issue:
1. Replaced the ethernet cord with one I know is working
2. Full scanned my pc for viruses
3. Disabled all firewalls and virus protection programs
4. Restored my pc to a previous save state
5. Reset winsock with cmd via these prompts: netsh winsock reset catalog and netsh int ip reset reset.log hit
6. This attempt is unfinished as I am getting stuck. I am attempting to setup a static ip to attempt to resolve the issue, but when I open cmd and type ipconfig/all, the default gateway under my local area connection is completely blank.Here is what comes up with ipconfig/all:
C:UsersPaul>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Paul-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code]....
I am on a mission to find out how to properly connect 2 computers to the same Internet "pipeline" (cable Internet - provider: Videotron - Canada) in an independent fashion so that when I shut down one computer, I do not lose the phone lines and my wife's computer still gets an Internet connection to the outside world.We are using Windows 7, the computers are brand new and the Internet connection is strong, but the moment I shut down my computer, within 5 minutes my wife computer will lose her Internet line and the phones will die.I am at a loss as to how to solve this since I have tried all combinations, permutations, you name it and nothing seems to work.Could it be my Internet provider's fault or am I doing something wrong when I connect everything to the router.
View 3 Replies View Relatedi have two computers, computer A running windows 7 pro and computer B running windows 7 ultimate,both computers are hooked to a switch.The network printers are also connected to the switch..internet cable plugged on the switch.i have assigned the computers and printers with static IP addresses but now that i got internet i don't know what step to take to maintain my Homegroup and be able to share files and connect the two computers to the internet,the last time i tried using the public file sharing i got access denied while opening shared folders and unidentified network
D-Link 8 port switch
Konica minolta Bizhub c220 printer
Hp 2025 dn printers
Two windows 7 machines
For some reason my router and modem will not show correctly on my dell inspirion one desktop. Im running windows 7 and here are the net work connection deatils
Connection -specific DNS Belkin
Description Realtek PCIe GBE Family Controller
Physical Address 00-00-00-00-00-00
DCHP Enabled Yes
Ipv4 Address 192.168.2.2
Ipv4 Subnet Mask 255.255.255.0
Lease obtained Wednesday, November 10, 2010 9:45 PM
Lease Expires Sunday, December 18, 2146 4:17 AM
IPv4 Default Gateway 192.168.2.1
Ipv4 DHCP Server 192.168.2.1
Ipv4 DNS Server 192.168.2.1
IPv4 WINS Server
NetBIOS over Tcpip enabled Yes
The Connection was working about ten days ago and then suddenly stopped and read as an unidentified network no internet access. at one point is was not receiving packets but now it is but it still says no internet access on the IPv4 Connectivity. Media state is also enabled and the speed is 100.0 Mbps when i troubleshoot it says windows cant identify problem but in the details it says default gateway is available. when i use the cmd prompt ipconfig/all my local ethernet adapter has a physical address of all zeros.
i am using n73 mobile to connect to the internet...ut now a days it couldnt get connect....it says modem not found....
View 2 Replies View Relatedjust last night after i was finished playing skyrim for the night, i saw on steam that i had no connection. so i looked towards the internet bars icon next to the clock and saw a yello triangle with a "!" in it. so i disconnected and reconnected but still the yellow "!". so i just decided i would try again tomorrow (today).when i woke up today it didn't have that error, so i decided to go to Internet on chrome, but it had that "webpage not available" (wouldn't work for ie either). i figured it would soon fix itself like it always had, so i tried playing mw3 on my xbox, but it wouldn't connect to live either o.o and when my mom wanted to watch netflix on the living room xbox, she couldn't connect either! then i figured out it was definatly my modem that was refusing to connect to anything.
View 9 Replies View RelatedI've got 3 computers using Windows 7, my computer acting as the "Home" for a homegroup allowing us to share files, data, etc. Yesterday our modem was replaced and now I am the only one who can see the homegroup and the data contained therein. Troubleshooting wizard is indicating that is is a network problem which leads me to believe that perhaps something to do with our change in modem. How I can get the homegroup to show again?
View 3 Replies View RelatedI'm having problems with my computer the OS is windows 7, Home Premium. It will not connect wirlessly to the modem. When i try to connect i get the error message "No connection available". When i first got the computer it worked fine but just suddenly stopped working for no apparent reason. My computer is still as it is at the start i have not installed any new programs. My computer is a Advent Roma 2000.
View 2 Replies View RelatedNew computer - Dell Inspiron 15R laptop. Windows-7 home premium 64-bit. Trying to access internet. 7 gives connection option of Broadband where ISP requires ID and Password. However, my ISP does not require this info to log on....its just "plug-n-play" I have run every test and diagnostic that I can find and the only prob I can find is something to do with the DNS, but have no way to fix the problem. The connection is Cable Modem, via LAN wire. One of the diagnostics recognizes my ISP, but still won't let me connect.
View 9 Replies View RelatedSince yesterday I can't connect to the modem with my desktop pc(windows 7 x64). I get APIPA as IP adress(169.254.*.*). Tho I could go on internet with my notebook with the cable I use for desktop PC.
this is how my connection looks like. I got only modem & switch between my connection to the internet. note: I have no fileserver.
I've checked the following things with my other PC(=notebook windows 7 x86): modem, switch, cable and my network card and everything did work fine. note: I did use the same cable as I was using for the desktop PC to be sure that the cableline was fine. I made the next tests with my desktop PC.
Then done the next ones without success:system restore(1 week)winsock fixreinstalling the networkcardgiving static IP adress
My network card settings are the same for the both PC, set to automatically obtain IP address and DNS server addresses
ipconfig /all of my desktop pc.(not working) Code: Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
[Code].....
I have Windows 7 64 bit. I bought a Netgear DGN2000 approximately two years ago. It is working well. Currently, there is good connectivity between my laptop and the modem/router (wired and wireless).
I worked on my desktop this morning, uninstalled some programmes, but must have uninstalled a driver or something. I inserted the Resource CD, which installs the modem (although it is installed). Then it stalls at some point. If I troubleshoot, it states Windows do not detect a properly installed network adaptor.
my pronet modem not connected to windows 7 i install s/w that provided me with pronet modem before that i use windows professional that time i easily connect in our hostel wi-fi router but after installation windows 7 my pronet modem not detected in my pc
View 1 Replies View RelatedI use wired connection (LAN) for connecting. All lights, including Power,LAN, DSL, and internet glow on the router. The small Network Access icon on the task bar shows that the computer has internet access. But I will still not be able to connect.
View 3 Replies View RelatedMy sons set me up with my old pc an new pc sharing my hdtv as a monitor. Wires came loose wile I was trying to re-arrange and now only one pc is seen when I choose inputs. is there a good link that shows the wiring diagram for modem, router, pc, tv, dvr...?
View 1 Replies View RelatedMy step dad has recently brought himself a new PC with windows 7 on it. So he now has 2 external drives he wants to use but when I plug them in they dont show up. What have I got to do to make them show up?
View 15 Replies View RelatedI had an existing pc with windows xp home. I just purchased a new pc with windows 7 home. Why I connected the windows 7 pc to the internet using dlink router I was able to access the internet. On the next day though, when I tried to connect again, I was not able to access the internet. Here are the tasks that I have already carried out to check the connectivity.
1. The windows 7 computer has a valid IP address, which means that ARP is working fine and my router is dispensing the addresses correctly.
2. When I try to ping the modem-router, there is no reply. So I am not able to access router using ICMP.
3. My old windows xp pc is able to connect and browse the internet. The problem is only with my new windows 7 pc.
my system cannot connect bsnl lan connection. i had software error in my system so i formatted os after thaaaat i trie to install modem cd but it cannot installed.i also tries 198.168.1.1 techinque but it hang out.how to connect it?. i am using window 7.
View 1 Replies View Relatedi cant seem to get second pc connected online over wired network with no router, says low connectivity & unidentified network, i connected just fine when i had window xp pro 32bit on frist pc, but when i install windows 7 on first pc, i could not connected online at all with second pc.
View 7 Replies View RelatedA few days ago i was trying to connect my laptop to my ps3.To do this i was changing setting etc but never got it to work anyway.The next day i turn the computer on and can't connect to the internet.I think it was something to do with dns.I uninstalled and reinstalled my usb modem and software and always get full connection bars and says its connected, but in the bottom right hand corner it says network "no internet access" with a yellow triangle over it.It was because i was changing all of the settings in network and sharing senter, but being the wally i am, never wrote down the original settings. Whatever i did i am fairly certain i did it in the change adapter settings.
View 5 Replies View RelatedSo everything was fine until today when I woke up. My internet wouldn't work, it was saying that I was connected with internet access but never gave me it. I checked my router settings and it shows all the correct things.
So then, I decided to check my brother's computer which is in the same room and he couldn't connect either. I turned my computer off and somehow, my brother's computer had internet access and could access the internet.
Posting from my brother's PC now. I have attempted everything, restarted the power to everything about 5 times. Our internet has always worked and has until today.
I have a question about sharing my Internet. Ok my internet provider sends me some analogue signals, my modems gets them, converts them to digital signals and then, sends this Connection to where it should go (I mean I can use this connection using e.g. wifi). I have a vpn connection. I wanna use it on my mobile. My mobile doesn't support vpn configuration. So somehow I should send the vpn connection from my pc and modem. How can I share the internet I am using in my pc using my WiFi modem?
View 2 Replies View RelatedThe problem with Windows 7 and an USB 3G modem is that everytime I use it it creates a new connection, and next time I plug the modem in it will be like "Internett Modem Connection 11" and in the connection list I got many of them, how can I prevent this issue? And can I delete some of them by any chance?
View 3 Replies View RelatedIn order to change my password a service provider had to reset my modem.I can go on the internet with my desktop, but I am having difficulties going on the internet with my laptop. It seems that my wireless router has to be reset also but he can't do it because it's not one of theirs. He did explain to me though that I have to put the I.P. address into the browser in order to get on the router's brand name and so on, which I did but I don't know what to do next. My router's I.P. address is 192.168.0.1 It is a NEXXT Nebula 150?
View 3 Replies View RelatedI have 2 Windows 7 computers one is a Hp Laptop and another is a Compaq Desktop I have been dealing with this problem for quite awhile and each time i go to try and correct the trouble i get unbelievably frustrated as in the end i never seem to make any progress. I have attempted to create a home group from both machines and when i do create a homegroup the other IS able to see the other but when i attempt to join from either one to the one that has created it always yields an error stating that "window cannot setup homegroup on this computer" The desktop is hardwired to my Dlink router and the laptop is connected wirelessly.
View 11 Replies View RelatedMy computer was working fine yesterday, it showed about 6 Networks and I was able to connect to my own network, D-Link fine. Now after playing a game via game booster I tried to acces Google Chrome and it says "this webpage is not available" I cant acces Skype or steam or anything that requires internet. I thought I had simply disconnected my self but when I went to check, it shows no networks. I thought this was my connection but then tried other devices "I-Mac, I-Pad, Windows XP Desktop and a DSI" and they all seem to find many networks and connect to D-Link fine.
View 1 Replies View RelatedHere's my setup:
* I am using a Blackberry to USB tether to my desktop (internet works on pc)
*Ethernet to WAN (from PC that has internet to wifi router)
*I get DNS is not responding now from any other computer connected to the network either wired or wifi
* Set up my network as following: Tether has internet sharing turned on and connected to Local Area Connection
* Local Area Connection has IP4 configured as:
IP address: 192.168.0.1
Subnet: 255.255.255.0
Default: blank
Preferred DNS Server: 192.168.1.1 (my ethernet connection so the internet connection is sent to wifi router)I have tried everything...I mean days of effort and searching. IP6 is disabled. Microsoft Virtual is disabled.This SAME exact setup was working perfectly a week ago with an older Linksys Wifi router. Then I bought a new Linksys E2000 and because I wanted something new (Bad move). That setup no longer worked on the new router....now it no longer works on the old router.
I've been trying to create a homegroup which my laptop (wireless) and my computer (wired) will be part of. They are both connected to the same router. My wireless is called "BuckleyWireless" and my wired computer is connected to something called "VirginMedia478xxx". I'm not sure whether these have to be the same name for it to work so I thought I'd post this anyway.I've checked the subnet mask for both computers and they are the same.I've tried turning off the firewalls on both computers.I've gone into advanced settings so that both computers are "visible" within the network.My laptop is now visible on my wired computer but it can't actually be accessed for some reason.
View 3 Replies View Related