I use wired connection (LAN) for connecting. All lights, including Power,LAN, DSL, and internet glow on the router. The small Network Access icon on the task bar shows that the computer has internet access. But I will still not be able to connect.
View 3 Repliesi am using n73 mobile to connect to the internet...ut now a days it couldnt get connect....it says modem not found....
View 2 Replies View RelatedYi pay about 30$ a mounth for a 300 kbit 5 gig traffic internet.But,it is free from 3 to 7pm.and I should download my heavy files in these hours.The thing is: I have to set a new username and password for this free internet.and changing the username and password needs a restart of my modem.I set my computer to turn on at 3pm.I set the public free user name and password in my modem before i go to sleep(note that it only connects to the internet at 3pm and AFTER I reset the modem)And IDM will automatically resume my unfinished downloads at 3:05 pm.So what I have to do is to wake up at 3 and retart the modem.Is it possible(with a program or anything) for me to have my computer go to my browser,enter the modem(by going to 192.168.1.1),enter the username and password and retart the modem?
View 1 Replies View Relatedjust last night after i was finished playing skyrim for the night, i saw on steam that i had no connection. so i looked towards the internet bars icon next to the clock and saw a yello triangle with a "!" in it. so i disconnected and reconnected but still the yellow "!". so i just decided i would try again tomorrow (today).when i woke up today it didn't have that error, so i decided to go to Internet on chrome, but it had that "webpage not available" (wouldn't work for ie either). i figured it would soon fix itself like it always had, so i tried playing mw3 on my xbox, but it wouldn't connect to live either o.o and when my mom wanted to watch netflix on the living room xbox, she couldn't connect either! then i figured out it was definatly my modem that was refusing to connect to anything.
View 9 Replies View RelatedI'm having problems with my computer the OS is windows 7, Home Premium. It will not connect wirlessly to the modem. When i try to connect i get the error message "No connection available". When i first got the computer it worked fine but just suddenly stopped working for no apparent reason. My computer is still as it is at the start i have not installed any new programs. My computer is a Advent Roma 2000.
View 2 Replies View RelatedNew computer - Dell Inspiron 15R laptop. Windows-7 home premium 64-bit. Trying to access internet. 7 gives connection option of Broadband where ISP requires ID and Password. However, my ISP does not require this info to log on....its just "plug-n-play" I have run every test and diagnostic that I can find and the only prob I can find is something to do with the DNS, but have no way to fix the problem. The connection is Cable Modem, via LAN wire. One of the diagnostics recognizes my ISP, but still won't let me connect.
View 9 Replies View RelatedSince yesterday I can't connect to the modem with my desktop pc(windows 7 x64). I get APIPA as IP adress(169.254.*.*). Tho I could go on internet with my notebook with the cable I use for desktop PC.
this is how my connection looks like. I got only modem & switch between my connection to the internet. note: I have no fileserver.
I've checked the following things with my other PC(=notebook windows 7 x86): modem, switch, cable and my network card and everything did work fine. note: I did use the same cable as I was using for the desktop PC to be sure that the cableline was fine. I made the next tests with my desktop PC.
Then done the next ones without success:system restore(1 week)winsock fixreinstalling the networkcardgiving static IP adress
My network card settings are the same for the both PC, set to automatically obtain IP address and DNS server addresses
ipconfig /all of my desktop pc.(not working) Code: Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
[Code].....
I have Windows 7 64 bit. I bought a Netgear DGN2000 approximately two years ago. It is working well. Currently, there is good connectivity between my laptop and the modem/router (wired and wireless).
I worked on my desktop this morning, uninstalled some programmes, but must have uninstalled a driver or something. I inserted the Resource CD, which installs the modem (although it is installed). Then it stalls at some point. If I troubleshoot, it states Windows do not detect a properly installed network adaptor.
I have a desktop computer connected to a wireless modem through an ethernet cable. My laptop is connected to the modem using wifi. Is there any way to connect the two computersThis my network map:
View 4 Replies View Relatedmy pronet modem not connected to windows 7 i install s/w that provided me with pronet modem before that i use windows professional that time i easily connect in our hostel wi-fi router but after installation windows 7 my pronet modem not detected in my pc
View 1 Replies View Relatedhow to connect 2 compute .1 is laptop and the other is desktop using bsnl broad band modem type 1 which have 4 port plus 1 usb port . so that both the computer has networking and internet connection.
View 2 Replies View RelatedMy sons set me up with my old pc an new pc sharing my hdtv as a monitor. Wires came loose wile I was trying to re-arrange and now only one pc is seen when I choose inputs. is there a good link that shows the wiring diagram for modem, router, pc, tv, dvr...?
View 1 Replies View RelatedMy step dad has recently brought himself a new PC with windows 7 on it. So he now has 2 external drives he wants to use but when I plug them in they dont show up. What have I got to do to make them show up?
View 15 Replies View RelatedHow do i connect 2 computers to the same modem using dlink switch so that i get internet connection in both the PC`s.
View 3 Replies View RelatedI had an existing pc with windows xp home. I just purchased a new pc with windows 7 home. Why I connected the windows 7 pc to the internet using dlink router I was able to access the internet. On the next day though, when I tried to connect again, I was not able to access the internet. Here are the tasks that I have already carried out to check the connectivity.
1. The windows 7 computer has a valid IP address, which means that ARP is working fine and my router is dispensing the addresses correctly.
2. When I try to ping the modem-router, there is no reply. So I am not able to access router using ICMP.
3. My old windows xp pc is able to connect and browse the internet. The problem is only with my new windows 7 pc.
My desktop (windows 7 ultimate 64bit) has been able to connect fine to the internet until I got home from work this morning. My laptop is connecting to the same modem fine through wireless (along with my wii). The modem I am using is Motorola SB 901. When I rightclick my connection on my desktop and hit troubleshoot problems, I get 'local area connection 2 doesn't have a valid ip configuration'. Same thing happens when I switch the ethernet cord to local area connection 1. When I go to control panel, network and internet, network and sharing, the connection map at the top stops between my pc and the network (which is now labeled as 'unidentified network'). Here is a list of what I have done so far to try and resolve the issue:
1. Replaced the ethernet cord with one I know is working
2. Full scanned my pc for viruses
3. Disabled all firewalls and virus protection programs
4. Restored my pc to a previous save state
5. Reset winsock with cmd via these prompts: netsh winsock reset catalog and netsh int ip reset reset.log hit
6. This attempt is unfinished as I am getting stuck. I am attempting to setup a static ip to attempt to resolve the issue, but when I open cmd and type ipconfig/all, the default gateway under my local area connection is completely blank.Here is what comes up with ipconfig/all:
C:UsersPaul>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Paul-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code]....
my system cannot connect bsnl lan connection. i had software error in my system so i formatted os after thaaaat i trie to install modem cd but it cannot installed.i also tries 198.168.1.1 techinque but it hang out.how to connect it?. i am using window 7.
View 1 Replies View RelatedFor some reason my router and modem will not show correctly on my dell inspirion one desktop. Im running windows 7 and here are the net work connection deatils
Connection -specific DNS Belkin
Description Realtek PCIe GBE Family Controller
Physical Address 00-00-00-00-00-00
DCHP Enabled Yes
Ipv4 Address 192.168.2.2
Ipv4 Subnet Mask 255.255.255.0
Lease obtained Wednesday, November 10, 2010 9:45 PM
Lease Expires Sunday, December 18, 2146 4:17 AM
IPv4 Default Gateway 192.168.2.1
Ipv4 DHCP Server 192.168.2.1
Ipv4 DNS Server 192.168.2.1
IPv4 WINS Server
NetBIOS over Tcpip enabled Yes
The Connection was working about ten days ago and then suddenly stopped and read as an unidentified network no internet access. at one point is was not receiving packets but now it is but it still says no internet access on the IPv4 Connectivity. Media state is also enabled and the speed is 100.0 Mbps when i troubleshoot it says windows cant identify problem but in the details it says default gateway is available. when i use the cmd prompt ipconfig/all my local ethernet adapter has a physical address of all zeros.
I have a laptop and regular computer and a new modem sent by comcast also a wireless modem. I can only get one to work. what am i doing wrong?
View 3 Replies View RelatedI have a Toshiba Laptop that after installing Dragon speech hardware somehow after shutting down my laptop it lost the password.Therefore I cant boot my laptop. How ca I reset my password without having a flash drive equipped with a reset wizard?
View 2 Replies View RelatedI'm trying to reset the popup blocker in explorer but can find tools to do the reset.
View 2 Replies View Related74 deg here in Fayetteville Arkansas USA.for MARCH 1ST we still have a chance of a Freeze till April 15...6 Weeks!Windows7 Home Premium
View 10 Replies View RelatedI had to reset my computer to factory settings a while back. I've done nothing to it except download advanced system optimizer and windows antivirus. This was a miracle alone due to the fact that my Computer locks up for extensive periods of time and will barely ever finish a task; such as transferring a picture to USB drive, scan, or any click command. It has never done this before the reset.
View 9 Replies View Relatedi bought a laptop from a pawnshop and its locked. how do i reset the user password without a usb flash drive or floppy disk
View 4 Replies View RelatedCan anyone advise how I would go about fixing this. I am trying to connect to a network (I have a dell running on windows 7) and it keeps telling me that windows is unable to connect to the network-this is before I can even enter the security key. I know it is not a problem with the wireless because other people are able to connect to it fine.
View 2 Replies View Relatedi am having mts data card and samsung laptop(R439 has wifi) now i need to connect my Sony ericsson mini pro through wifi to use Internet
View 1 Replies View RelatedI am using Micromax 300c EVDO modem ( Datacard ) for wireless broadband connection. In one machine having Intel 915 Chipset motherboard, it is working fine. In the device manager, in the modem category, it shows correctly as " CDMA 2000 Rev A Modem ". In another machine, having Intel DG41TY motherboard, the device manager does not show modem. Only in other devices category, shows as Data services. ( in ports category both diagnostic and service ports are shown correctly)
View 4 Replies View RelatedI hv been using Windows 7 for 2yrs on my HP DV6502AU Laptop, using vista's drivers for the same, everything was fine bt few days back its sound went off with a cross mark on the sound icon. I triesd to reinstall the drivers bt it shows "cannot find the media device for this driver". So i formatted my laptop and installed windows 7 again to check whether it will work or not. And the bad luck followed, now modem driver is showing the same"cannot find the modem device for this driver".
View 3 Replies View RelatedI can't connect to the internet on my desktop pc after I reinstalled windows. I have linksys wrt320n router and I can connect to it only by wi-fi. When I try to install router's setup wizard or network magic - it writes that my computer is not connected to router though it is connected in the same way as it was before. In the LOCAL AREA CONNECTION it is also written that network cable is unplugged...I also tryed to connect just internet cable without router - PC also didn't react. Maybe the problem is that my network adapter (nvidia nforce) is without appropriate drivers? Cause I can't find drivers for nvidia nforce networking contoller for windows 7.
View 2 Replies View RelatedI have one USB modern,how can i configure to be used by two computers??
View 2 Replies View RelatedI cannot get any fax software to see the modem. I used the windows fax program and I think after an windows update this is not working. I have windows home premiun
View 5 Replies View Related