I am using Micromax 300c EVDO modem ( Datacard ) for wireless broadband connection. In one machine having Intel 915 Chipset motherboard, it is working fine. In the device manager, in the modem category, it shows correctly as " CDMA 2000 Rev A Modem ". In another machine, having Intel DG41TY motherboard, the device manager does not show modem. Only in other devices category, shows as Data services. ( in ports category both diagnostic and service ports are shown correctly)
i have two OS install in my PC. one is win xp in c: drive and another is win 7 ultimate 64 bit OS in e: drive.my modem is teracom. from my windows xp i could successfully set up broadband connection and could connect internet but when i try to establish internet connection from win 7 then i am getting error like modem not recognize.
I hv been using Windows 7 for 2yrs on my HP DV6502AU Laptop, using vista's drivers for the same, everything was fine bt few days back its sound went off with a cross mark on the sound icon. I triesd to reinstall the drivers bt it shows "cannot find the media device for this driver". So i formatted my laptop and installed windows 7 again to check whether it will work or not. And the bad luck followed, now modem driver is showing the same"cannot find the modem device for this driver".
I can't connect to the internet on my desktop pc after I reinstalled windows. I have linksys wrt320n router and I can connect to it only by wi-fi. When I try to install router's setup wizard or network magic - it writes that my computer is not connected to router though it is connected in the same way as it was before. In the LOCAL AREA CONNECTION it is also written that network cable is unplugged...I also tryed to connect just internet cable without router - PC also didn't react. Maybe the problem is that my network adapter (nvidia nforce) is without appropriate drivers? Cause I can't find drivers for nvidia nforce networking contoller for windows 7.
I cannot get any fax software to see the modem. I used the windows fax program and I think after an windows update this is not working. I have windows home premiun
I'm having problems with my computer the OS is windows 7, Home Premium. It will not connect wirlessly to the modem. When i try to connect i get the error message "No connection available". When i first got the computer it worked fine but just suddenly stopped working for no apparent reason. My computer is still as it is at the start i have not installed any new programs. My computer is a Advent Roma 2000.
I recently purchased a small usb fax modem from ebay. It is a simple device, with a usb connector on one end, and a receptacle for a telephone line on the other end. So obviously, this is not difficult to "install". But my problem concerns getting the correct drivers installed. The unit came with a mini-cd-rom which has some drivers. But there are no instructions. It also contained a "Read Me" file, but unfortunately this was i Chinese and I couldn't read it.
The computer specs : HP200-5120IS, (All-in-one ) Microsoft Windows 7 Home Premium 64-bit Edition Intel Pentium E5400 / 2.7 GHz, Dual-Core 64-bit Computing Cache Memory Per Processor 2 MB 4.0 GB, DDR3 SDRAM Hard Drive 500.0 GB -7200 rpm DVD-RW (R DL) / DVD-RAM - Serial ATA LCD display - TFT active matrix, 21.5 in Graphics - Integrated GMA X4500HD
New computer - Dell Inspiron 15R laptop. Windows-7 home premium 64-bit. Trying to access internet. 7 gives connection option of Broadband where ISP requires ID and Password. However, my ISP does not require this info to log on....its just "plug-n-play" I have run every test and diagnostic that I can find and the only prob I can find is something to do with the DNS, but have no way to fix the problem. The connection is Cable Modem, via LAN wire. One of the diagnostics recognizes my ISP, but still won't let me connect.
I installed the windows 7 RC with great enthusiasm but found that the driver for my speedtouch 330 adsl modem which was working fine for beta not working the problem being the setting option for world cannot be selected. Bad experience from windows7 indeed!
I found a link to this but it was 459 days ago.Suggested starting a new thread.I discovered my original PC usb modem (circa 2001) so I tried the set-up procedure and it informs me my fax is installed correctly.I tried to send to my own number, before I set-up receive faxes.I also tried to send to "fax toy" just to test the set-up.All give the message "pending".I have connected to the same telephone connection as my home phone.
I know this might not be the place for this question but i have just downloaded a Firmware update for me modem but the files came in .rom and . bin and i am unfamiliar with these files how do i open them or with what do i open them with???
i got problem with my mobile dial up modem, the modem was detected on device manager, and queryable on the modem properties itself, but i dont know why my modem cant be found when i try to create new dial up connection. i try to research over google and found, it could be the telephony problem, and yes when i try to open phone & modem control panel, then the error showed Code: phone and modem control panel can not be opened. you may have a problem starting telephony service , then i try to restaring the telephony service on windows services, i dont know why this problem occured, cause yesterday everything is just fine...
A few days ago i was trying to connect my laptop to my ps3.To do this i was changing setting etc but never got it to work anyway.The next day i turn the computer on and can't connect to the internet.I think it was something to do with dns.I uninstalled and reinstalled my usb modem and software and always get full connection bars and says its connected, but in the bottom right hand corner it says network "no internet access" with a yellow triangle over it.It was because i was changing all of the settings in network and sharing senter, but being the wally i am, never wrote down the original settings. Whatever i did i am fairly certain i did it in the change adapter settings.
I'm going out on a limb here in what I want to do. I'm not even sure it can be done.
Is there anyway for me to get a dial tone out of my laptop? I get my wifi from a Verizon UML290 LTE modem. I need it to run my credit card machine in my vehicle.
Every now and then the internet will stop working on my PCs. I have 2 near me at all times and both will stop working, a wireless lappy and wired desky lol.It will come back in a moment or in a little while. I havent figured out if its the router or the cable modem.
Yi pay about 30$ a mounth for a 300 kbit 5 gig traffic internet.But,it is free from 3 to 7pm.and I should download my heavy files in these hours.The thing is: I have to set a new username and password for this free internet.and changing the username and password needs a restart of my modem.I set my computer to turn on at 3pm.I set the public free user name and password in my modem before i go to sleep(note that it only connects to the internet at 3pm and AFTER I reset the modem)And IDM will automatically resume my unfinished downloads at 3:05 pm.So what I have to do is to wake up at 3 and retart the modem.Is it possible(with a program or anything) for me to have my computer go to my browser,enter the modem(by going to 192.168.1.1),enter the username and password and retart the modem?
Is there any way to enter a router (e.g. 192.168.15.1) via a cable modem, that is, without having to disconnect the cable modem from the computer and connect the router directly to the computer?
I am trying to enable a new Incoming Connection but get a message saying "Incoming connections depend on the Routing and Remote Access service, which was unable to start".I have a standard 56K modem installed, using a telephone line.The computer is a stand alone system, running a local application where Internet access is not required.I do however need to access the PC from time to time and dialup is the only option.Is there a work around as it appears that Windows 7 needs to identify a Netork befor starting the Routing and Remote Access service?
i think i finde why my PC have high PING on winodws 7. Here is windows ImageShack® - Done Winodws 7 cant finde this driver, i dont know what should i do, and where i can get this driver? Because i searched a lot of forums but i didnt saw from where i can download this driver. If i try fix this driver, maybe my Ping will fix on winodws 7.
When i dial up, i get some Error Message 633 message about COM port being used by other application or modem not configured properly.
In device manager the modem seems OK, and i dont know of any other device using a COM port. I've tried different drivers, swapping the modem around inside the case but no joy and i'm getting really annoyed now.
