I installed a huawei modem EC221 on a laptop - Windows 7 64bit but I cant seem to get it connected to access the internet?
Do I need to install or update the drivers? Don't seem to have any problems with 32 bit version but 64 bit is driving me nuts
I can't get my Huawei 169 modem to function in Windows 7, I've tried both build 6801 and 6956 -same result
As soon as I plug the modem in Windows 7 recognizes it as a usb disk, I can access the disk and launch the on board installer. I've downloaded the latest driver from the Huawei site, but the installer fails with the error "can't find any modem"
If I do a hardware scan in the device manager only the usb disk turns up, but not the modem.
I'm using this modem on this laptop in both WinXP and OSX without any problems, so the modem and PC is allright...
Is there any special windows 7 services that I need to start?
Huawei e156g Mobile Broadband USB Stick
HP Pavilion dv7 2070ea
Windows 7 Professional 64bit
The laptop came preinstalled with Vista Home 64bit and i was able to use the mobile broadband without any issues.
I have installed Windows 7 Pro 64 in a dual boot config and it runs fine on wired or wireless connections, but when i try to use the mobile broadband i run into issues.
After the modem driver and software install and a few restarts I was able to get all the devices in the device manager to be happy, and i was able to connect via the 3 Connect software and access the internet. But after a few minutes Windows will inevitably lock up, regardless of what program is being used. The screen will freeze, there will be zero harddrive activity and the only course of action is to hold down the power button
The mobile broadbands company site says that the vista drivers should be happy on windows 7, but something isnt happy.
I really need to resolve this as my mobile broadband allows me to connect to various servers for work via its allowed IP address.
Is this the modem, the USB bus or something else?
I have checked the event log and there isnt anything useful in there.
I have a problem with Huawei E630 wireless modem. Afert pluging in - PCMCIA type II card - it's starting to install but afert couple seconds it gives BSOD with IRQL_NOT_LESS_OR_EQUAL.
Also, becouse I think it might come handy, card was working well on XP or Vista 32bit.
Oh, and something else, after pluging it install a NEC USB controller - showed in Device Manager - and secondary a Modem.
Installing Huawei modem Driver of PTCL V Wireless on windows 7. In this article you will find how to install huawei modem (ETS2558) drivers of previous version windows (XP) on windows 7.
Other user (other modem brand) of PTCL V or windows XP service pack 3 and vista user may get help from there to install their drivers.
As we know that win 7 has great support for previous windows applications so software make no problem only driver create a problem.
To install the driver follow these steps.
1- Insert CD into CD/ DVD ROM.
2- Cancel auto run of huawei application.
3- Go to start Menu in search bar type "Troubleshooting" and open it from menu.
4- Now click on programs and follow the instruction (Run application in Win XP service pack 2 compatibility mode and follow procedure same as XP).
Select not listed….
Select Location of application….
Click on "Try recommended settings"
Now click on start the Program…
5-After installizations save compatibility settings. (Windows may warn u that it is not compatible just ignore it).
6-Now go to the Device manager here you will see TUSB3410 DEVICE IN Multiport serial adapters which will be marked with some sign Right click on it and then click on update driver. Now click on brows files from computer and select CD/ DVD ROM in which driver is found. It will scan the CD/ DVD ROM n find and install drivers automatically.
7-Refresh the list of device manager or re-open it. U will see that USB-Serial Port (COM 3) in Ports (COM & LPT) will be marked with sign. Now perform same procedure as in step 6 with it.
Now you are ready to use your application.
Now open application ptcl v and click on connect it may take 1 to 2 minutes by displaying a message initializing.
why huawei e1550 usb modem is not working on the Fujitsu life-book a530
View 1 Replies View RelatedI have a laptop and regular computer and a new modem sent by comcast also a wireless modem. I can only get one to work. what am i doing wrong?
View 3 Replies View RelatedHow do i make my laptop/notebook a wireless with usb modem?
View 2 Replies View RelatedAll I want to do is make and receive land line phone calls on my pc. NOT VOIP. Using a USB headset and USB voice modem. Please can you tell me the specification I need for the modem and suitable software to make it all work?
View 4 Replies View Relatedwhat is a compatible fax modem for a 64bit windows 7? Need to fax pdf files 200 pages 25mb-30mb.
View 1 Replies View Relatedso i have two laptops, Acer1(7 home premium) and Acer2(XP) and a dsl modem plugged via ethernet to Acer1. I will share the internet from Acer1 wirelessly to Acer2.
So on Acer1, I create a ad-hoc network and everything and Acer2 is able to connect to it.
If i reboot Acer1, I have to connect to the network I created and it brings it up, Acer2 connects to it but doesn't have internet access. Sometimes it will kick me off my LAN connection and I won't have any internet through either computer.
but if I go in and create a new ad-hoc network, it works fine.
i have a HAMLET HDSL640 USB MODEM ADSL and there are only drivers for 32bit that don't work with seven 64bit
there are no installation with these drivers, only the drivers that canìt be installed on 64bit
there are solution or not?
I have recently got a new laptop with Windows 7 professional and facing a strange problem that sound becomes dead as soon as I connect USB modem to it and open the vendor specific software. I was using the same modem on win xp machine for last one year and did not face any such issue. I tried to install the new drivers for audio but problem still persist. Verified the drivers for audio and modem and everything looks to be fine and working.
View 2 Replies View RelatedI just installed Windows 7 64bit. I use a Samsung Rant m540 Cell Phone for my internet connection. I can't get high speed on my road so its a lot better than dial up. Any way I've used it for a few years and now I cant seem to get it installed. It works fine on other comps and I had a driver for win xp 64bit that works. I got it installed on the windows 7 and it shows up as the modem and says its working properly but it wont respond when I try to query the modem or connect to the internet. I am pretty sure I just need a driver for the windows 7 for the phone as modem. But Sprint does not have a driver or program which supports it and neither does Samsung which created the phone. I googled for at least 5 hours with no success ive tried a few differnt drivers and no luck.
View 16 Replies View RelatedHow do I make windows 7 act like windows service pack 2, i have a tv card using pci slots, it doesnt work with windows 7.
View 2 Replies View RelatedI run windows 7 enterprise as an administrator and I want to make use of applocker. So I start the local security policy, enable applocker and create the default rules. If all is correct I should not be able to run executables in for example "D:Applicationsquickpar" but unfortunately I can. I even create a rule which explicitly blocks "D:Applicationsquickparquickpar.exe", however I can still run it. I even got the application identity service running, so I don't know what is wrong.
View 6 Replies View RelatedI have a laptop. i install windows7 in it. aafter insatlling it .
my PC is turning off when i try to running on battery.
a blank screen displays and then turning off.
how can i correct it?
how to make ram work as a graphic card
View 4 Replies View RelatedMy computer has no sound at all and the thing is that nothing is muted
View 1 Replies View RelatedHow can I make edit to work in win 7 x64?
View 2 Replies View RelatedHow to make generic ink cartridges work on hp printer
View 2 Replies View Relatedhow to make my numeric keapad work in windows 7 on my laptop
View 1 Replies View RelatedMaking novell netware 5.1 work with windows 7. My server is Novell 5.1 The workstations are Xp Pro And 1 is home edition (Which was not compatable with novell but prevailed on that irritating issue.) Now I need to configure a win7 workstation to my server. I know win7 does not support spx ipx protocol at all.
View 2 Replies View Relatedi am not hearing any sound from my PC and the speakers r connected' what can i do to make it work again
View 1 Replies View Relatedi am using n73 mobile to connect to the internet...ut now a days it couldnt get connect....it says modem not found....
View 2 Replies View RelatedHere's what you need to do for both 32 bit and 64 bit Windows 7 systems:
- Download the 'Windows Mobile Device Center' ( current version is 6.1 ) which you can download it from url...this works for both Vista and Windows 7. I've tried it on both.
- Install the downloaded software but it may not look like it worked on Windows 7 PCs. Vista automatically configures the settings on the bluetooth devices but for those who have Windows 7, here are the things you should do:
- Go to 'Device Manager' from 'Control Panel' -Or- just right-click on Computer Icon and choose 'Properties' and then click on 'Device Manager'.
- You'll see an 'Unknown Device' named 'Bluetooth Peripheral Device'
- Right-Click it and click on "Update Driver Software" -Or- anyway you find it easy to bring up the Update driver window.
- Click "Browse My Computer for Driver Software" button.
- Click "Let Me Pick from a List of Device Drivers on my computer".
- Select 'Bluetooth Radio' from the list if it asked you to select and then in the next window, it will show a list of drivers with Company Names in one list and Drivers in another. In the Company List choose 'Microsoft Corporation', not only Microsoft.
- From the drivers list there may be one or more drivers with the name "Windows Mobile-Based Device Support" with different driver versions. Select one or the latest.
- Ignore any warnings and keep pressing next and then Finish at last. If all goes well, the last screen will show the message that device driver is successfully installed.
Now, after manually updating the driver for your bluetooth device, in 'Device Manager' when you click on 'Bluetooth Radios', it should display one more item which will say 'Windows Mobile-based device support'.There are few more things that you want to pay attention to. If you have already added the device in your 'bluetooth device list' that didn't work, then remove the device and add it again. After you add it, you might need to restart the computer if it gave you a connection problem error message. Every PCs that had Windows 7 and Vista worked after installing this software and I hope it will work for you too.
Does anyone know a program or a way to make the processor work at a specific frequency?e.g. = if the processor is 1.5GHZ , to make it work at 1GHZ when i want to , using a program.
View 9 Replies View RelatedHow can I make my HP5370C scanner work with Windows 7
View 1 Replies View Relatedhow to make my 5.1 speaker work when hdmi is not plugin
View 2 Replies View RelatedHow do i make dune 2000 work on windows 7 it won't let me install because of the 64-bit.
View 8 Replies View RelatedI have a trusty dusty HP Laserjet 3200. There are no W7 drivers for this model yet and the Vista 64 drivers don't work and can't be installed in compatibility mode.
Are there any other drivers out there that will work with the Laserjet 3200 and W7 and give me basic functionality or am I just SOL until HP releases some drivers?