I have a problem with Huawei E630 wireless modem. Afert pluging in - PCMCIA type II card - it's starting to install but afert couple seconds it gives BSOD with IRQL_NOT_LESS_OR_EQUAL.
Also, becouse I think it might come handy, card was working well on XP or Vista 32bit.
Oh, and something else, after pluging it install a NEC USB controller - showed in Device Manager - and secondary a Modem.
Installing Huawei modem Driver of PTCL V Wireless on windows 7. In this article you will find how to install huawei modem (ETS2558) drivers of previous version windows (XP) on windows 7.
Other user (other modem brand) of PTCL V or windows XP service pack 3 and vista user may get help from there to install their drivers.
As we know that win 7 has great support for previous windows applications so software make no problem only driver create a problem.
To install the driver follow these steps.
1- Insert CD into CD/ DVD ROM.
2- Cancel auto run of huawei application.
3- Go to start Menu in search bar type "Troubleshooting" and open it from menu.
4- Now click on programs and follow the instruction (Run application in Win XP service pack 2 compatibility mode and follow procedure same as XP).
Select not listed….
Select Location of application….
Click on "Try recommended settings"
Now click on start the Program…
5-After installizations save compatibility settings. (Windows may warn u that it is not compatible just ignore it).
6-Now go to the Device manager here you will see TUSB3410 DEVICE IN Multiport serial adapters which will be marked with some sign Right click on it and then click on update driver. Now click on brows files from computer and select CD/ DVD ROM in which driver is found. It will scan the CD/ DVD ROM n find and install drivers automatically.
7-Refresh the list of device manager or re-open it. U will see that USB-Serial Port (COM 3) in Ports (COM & LPT) will be marked with sign. Now perform same procedure as in step 6 with it.
Now you are ready to use your application.
Now open application ptcl v and click on connect it may take 1 to 2 minutes by displaying a message initializing.
I can't get my Huawei 169 modem to function in Windows 7, I've tried both build 6801 and 6956 -same result
As soon as I plug the modem in Windows 7 recognizes it as a usb disk, I can access the disk and launch the on board installer. I've downloaded the latest driver from the Huawei site, but the installer fails with the error "can't find any modem"
If I do a hardware scan in the device manager only the usb disk turns up, but not the modem.
I'm using this modem on this laptop in both WinXP and OSX without any problems, so the modem and PC is allright...
Is there any special windows 7 services that I need to start?
Huawei e156g Mobile Broadband USB Stick
HP Pavilion dv7 2070ea
Windows 7 Professional 64bit
The laptop came preinstalled with Vista Home 64bit and i was able to use the mobile broadband without any issues.
I have installed Windows 7 Pro 64 in a dual boot config and it runs fine on wired or wireless connections, but when i try to use the mobile broadband i run into issues.
After the modem driver and software install and a few restarts I was able to get all the devices in the device manager to be happy, and i was able to connect via the 3 Connect software and access the internet. But after a few minutes Windows will inevitably lock up, regardless of what program is being used. The screen will freeze, there will be zero harddrive activity and the only course of action is to hold down the power button
The mobile broadbands company site says that the vista drivers should be happy on windows 7, but something isnt happy.
I really need to resolve this as my mobile broadband allows me to connect to various servers for work via its allowed IP address.
Is this the modem, the USB bus or something else?
I have checked the event log and there isnt anything useful in there.
I installed a huawei modem EC221 on a laptop - Windows 7 64bit but I cant seem to get it connected to access the internet?
Do I need to install or update the drivers? Don't seem to have any problems with 32 bit version but 64 bit is driving me nuts
why huawei e1550 usb modem is not working on the Fujitsu life-book a530
View 1 Replies View RelatedI have a laptop and regular computer and a new modem sent by comcast also a wireless modem. I can only get one to work. what am i doing wrong?
View 3 Replies View RelatedI have a laptop with Windows 7 Home Premium 64 bit. It gives BSOD when I try to use Huawei data card. The error comes exactly when I click on "Connect" button. I have attached all the files.
View 1 Replies View Relatedmy computer crashes while I plug in my Huawei e1820 usb device. Stop error (0xC0000005, 0x92802703) ewusbnet.sys - address 92802703 base at92800000, datestamp4adef47f My computer has Realtek PCIe GBE Family Controller ver: 7.46.610.2011 The message I get from microsoft in my action center is to update my drivers or check if device conflicts.
a. using this device on my office computer running win XP does not cause any problems
b. connecting my home computer to my office LAN does not cause BSOD at all.Had AVG anti virus - uninstalled it & had microsoft security essentials installed.
how to get wireless modem driver
View 1 Replies View RelatedI have this really strange problem that started today.Whenever i plug in a USB storage device like my phone, USB stick or portable HDD.Windows backup starts automatically.I checked my autoplay settings and everything is set to either "Ask Me" or "Do Nothing"
View 1 Replies View RelatedHow do i make my laptop/notebook a wireless with usb modem?
View 2 Replies View RelatedJust bought this belkin router. Linked one computer through LAN and 4 devices through WIFI or some reason my WIFI devices are not able to read or detect connections to the LAN network
View 1 Replies View RelatedMy desktop (windows 7 ultimate 64bit) has been able to connect fine to the internet until I got home from work this morning. My laptop is connecting to the same modem fine through wireless (along with my wii). The modem I am using is Motorola SB 901. When I rightclick my connection on my desktop and hit troubleshoot problems, I get 'local area connection 2 doesn't have a valid ip configuration'. Same thing happens when I switch the ethernet cord to local area connection 1. When I go to control panel, network and internet, network and sharing, the connection map at the top stops between my pc and the network (which is now labeled as 'unidentified network'). Here is a list of what I have done so far to try and resolve the issue:
1. Replaced the ethernet cord with one I know is working
2. Full scanned my pc for viruses
3. Disabled all firewalls and virus protection programs
4. Restored my pc to a previous save state
5. Reset winsock with cmd via these prompts: netsh winsock reset catalog and netsh int ip reset reset.log hit
6. This attempt is unfinished as I am getting stuck. I am attempting to setup a static ip to attempt to resolve the issue, but when I open cmd and type ipconfig/all, the default gateway under my local area connection is completely blank.Here is what comes up with ipconfig/all:
C:UsersPaul>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Paul-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code]....
I own a Belkin Wireless G Modem/Router. I connect my computer to it via Realtek RTL8139/810x wired network adapter.
Just a moment ago, my computer could not connect to the Internet. When I ran the troubleshooting tool, it suggested to "Make sure the other end of the cable is plugged into the router. If that does not help, try a new cable."
I checked the LED light on the network card, and it appears to be solid red. I'm not too sure about its usual colour when it was working fine. The modem's LED shows that it detected a connection from the cable. I tried to replace the cable with another one, but it the light is still red and the modem still shows that it detects a connection from the cable, but my windows is not able to connect to the modem. It failed to detect any connection.
I am currently using a D-link wireless USB adapter to connect to the modem.
Can anyone tell me what is wrong? Is there a problem with my settings or is the network card damaged?
i am using n73 mobile to connect to the internet...ut now a days it couldnt get connect....it says modem not found....
View 2 Replies View RelatedThis question may not be what you think it is. I am trying to fix an intermittent issue in my home environment. The issue is I am having to use wireless. Our Xfinity Cable/WAP modem sits on the top floor of our house. I am located in the basement. The wireless signal I get most of the time is very good, and by very good i mean at least 15+ mb/s on [URL]
I am taking the Cisco Network Academy classes and am familiar with network terminology and concepts. However, what I'm trying to do is take a router/WAP (using it downstairs where I'm located) and configure it to access our xfinity modem upstairs, so that I can plug in to it downstairs using a RJ-45.
Let me know what yall think. By the way the router/wap i would be using is a netgear model unknown at this moment but could easily find out.
I am using window 7 ultimate on my dell notebook. I just purchased broadband data card of Huawei from tata indicom. The system get hanged after using it for 5 to 15 minutes and respond only on doing system switch off.Do we have any solution as the firm's technical person just waisted my time thrice for no result?
View 1 Replies View Relatedhave problem with vodafone e272 modem drivers on Windows 7 64bit build 7000. Tried vista64bit drivers but don't work.
View 1 Replies View RelatedI use Huawei K3765 USB Dongle. I have unlocked it so that I can use other SIM cards with it. I also had to install Mobile Partner for it. But now I am getting an error in Mobile Partner saying, "the device has been disconnected or is unavailable".I can still connect to the internet through dial-up but to use 3G services I need Mobile Partner. Now here is a link where a solution is posted.[URL]... I would like to know whether uninstalling every driver under 'Universal Serial Bus Controllers' is safe or not.
View 4 Replies View Relatedi connect the net setter but sum huawei mobile driver lost.
View 1 Replies View RelatedI can't install Huawei E173 under Windows 7 Ultimate 64-bit Service Pack 1. I get the following message:"Upravljački program nije pronađen" in the screenshot means "Driver not found".I have also tried connecting the modem while connected to the Internet, to no avail.I had previously installed and used 3 other USB mobile broadband modems on the same system, 2 of which were Huawei. All software for these modems is supposed to be uninstalled.However, when I install it under a VMware virtual machine with a fresh install of the same operating system, everything works fine.I have also tried copying all relevant drivers successfully installed under the virtual machine to the physical machine, but that doesn't completely work, either.
View 4 Replies View RelatedI've got a Sony Vaio labtop I bought 10 months ago in the US. I'm in Australia now but have no international warranty. Sony tells me to send the labtop to Sony repair so they can look at it. They trouble shooted over the phone but it didn't help. Asked me to reformat the hard drive which I really don't want to do. This is the problem:
The computer works fine and I can connect and browse the internet with my wireless connection. However, as soon as I connect another computer to the wireless network (or if I'm in a hotel using wireless it also happens because other computer are connected to the same network) I get the BSOD.
The problem is that I cannot say exactly when it happens. SOmetimes it happens within 1 minute of being connected and browsing. Yet sometimes it takes 20min or maybe 45min. I don't think I survived longer than 1h though with 2 computers on the same wireless network.
I didn't notice the problem at first because I only used the one computer. So, I think the problem has always been there but I didn't notice it until I connected a 2nd computer.
To get the blue screen I don't even have to actively browse. I could just scroll down on a page and it happens without warning.
This Dell Vostro is 2 years old, it has Windows 7 installed. When the internal wireless card is turned on, it connects alright for about 5 minutes and then the computer will BSOD or Black Screen then restart. Ethernet works fine.It has a strange behavior history.Before reformat, I ran Malwarebytes which detected malware in Adobe CS5, after clearing that up it stopped BSODing for a day of constant use. Then the wireless card stopped working at all. Windows could not even detect it for a few days. After the Windows reformat and reinstall it started working for half a day. Had the latest Dell driver installed for it.Today it BSOD's and Black screens after a few minutes. We have to turn off the radio toggle to keep it from crashing Windows.There was liquid spill about a month and a half ago. It was about an 1/4 cup of wine, attended to promptly. Within seconds of the spill it was shut down and put in front of a dehumidifier for a few days and turned upside down. It is possible it corrupted the card or card slot, but we have no other issues with the computer. I don't suspect this but it is worth mentioning. Our next step is to purchase a new card, examine for corrosion on the slot or card, but.......I have to say I still suspect a software conflict.
What has already been done:
Reformated and reinstalled Win 7
Uninstalled and reinstalled the card drivers
Updated all service packs and win updates.
A few days ago I booted up my HP Pavilion dv4-2049wm laptop. Windows update needed to reboot, due to my postponing it for a few days, so I let it reboot and I started getting blue screens. After a few restarts (getting the BSOD every time), I booted into the last known good configuration. It booted up fine, but now I can no longer connect to my network (wired and wireless). It sees my wireless connection, but states "Limited Access."
Things I have tried:
- Uninstalled/Updated network drivers from HP's site, specific to my laptop model.
- Uninstalled all windows updates that were installed before BSOD
- Flushed, registered, renewed dns via command prompt
- Reset Winsock via command prompt
- Tried a "clean" boot
- Ran Windows Check Disk
- Ran Windows Memory Tester (Unsure of exact name)
On the day of the crash I attempted to do a restore, but the earliest restore I could do was at the time of the windows update (same time as BSOD). One thing I did notice is that the "Teredo Tunneling Pseudo_Interface" listed under network adapters is no longer there. Not sure what that might have to do with anything. I ran this tool (Who Crashed/Crashdump) and here is my log:
Code:
System Information (local)
computer name: DECARO
windows version: Windows 7 , 6.1, build: 7600
windows dir: C:Windows
CPU: AuthenticAMD AMD Turion™ II Ultra Dual-Core Mobile M620 AMD586, level: 16
2 logical processors, active mask: 3
RAM: 4022542336 total
VM: 2147352576, free: 1925451776
Crash Dump Analysis .........
[Code] ....
On your computer a total of 26 crash dumps have been found. Only 21 could be analyzed. Only 15 are included in this report. 2 third party drivers have been identified to be causing system crashes on your computer. It is strongly suggested that you check for updates for these drivers on their company websites. Click on the links below to search with Google for updates for these drivers:
atikmpag.sys (AMD multi-vendor Miniport Driver, Advanced Micro Devices, Inc.)
athrx.sys (Atheros Extensible Wireless LAN device driver, Atheros Communications, Inc.)
If no updates for these drivers are available, try searching with Google on the names of these drivers in combination the errors that have been reported for these drivers and include the brand and model name of your computer as well in the query.
I have been having many BSOD's today. I found out that they're related to wireless lan connection because I get them when I tried to use wi-fi connection.
View 1 Replies View RelatedI am using Micromax 300c EVDO modem ( Datacard ) for wireless broadband connection. In one machine having Intel 915 Chipset motherboard, it is working fine. In the device manager, in the modem category, it shows correctly as " CDMA 2000 Rev A Modem ". In another machine, having Intel DG41TY motherboard, the device manager does not show modem. Only in other devices category, shows as Data services. ( in ports category both diagnostic and service ports are shown correctly)
View 4 Replies View RelatedI hv been using Windows 7 for 2yrs on my HP DV6502AU Laptop, using vista's drivers for the same, everything was fine bt few days back its sound went off with a cross mark on the sound icon. I triesd to reinstall the drivers bt it shows "cannot find the media device for this driver". So i formatted my laptop and installed windows 7 again to check whether it will work or not. And the bad luck followed, now modem driver is showing the same"cannot find the modem device for this driver".
View 3 Replies View RelatedI can't connect to the internet on my desktop pc after I reinstalled windows. I have linksys wrt320n router and I can connect to it only by wi-fi. When I try to install router's setup wizard or network magic - it writes that my computer is not connected to router though it is connected in the same way as it was before. In the LOCAL AREA CONNECTION it is also written that network cable is unplugged...I also tryed to connect just internet cable without router - PC also didn't react. Maybe the problem is that my network adapter (nvidia nforce) is without appropriate drivers? Cause I can't find drivers for nvidia nforce networking contoller for windows 7.
View 2 Replies View RelatedI have one USB modern,how can i configure to be used by two computers??
View 2 Replies View RelatedI cannot get any fax software to see the modem. I used the windows fax program and I think after an windows update this is not working. I have windows home premiun
View 5 Replies View Related