I am using window 7 ultimate on my dell notebook. I just purchased broadband data card of Huawei from tata indicom. The system get hanged after using it for 5 to 15 minutes and respond only on doing system switch off.Do we have any solution as the firm's technical person just waisted my time thrice for no result?
my computer crashes while I plug in my Huawei e1820 usb device. Stop error (0xC0000005, 0x92802703) ewusbnet.sys - address 92802703 base at92800000, datestamp4adef47f My computer has Realtek PCIe GBE Family Controller ver: 7.46.610.2011 The message I get from microsoft in my action center is to update my drivers or check if device conflicts.
a. using this device on my office computer running win XP does not cause any problems
b. connecting my home computer to my office LAN does not cause BSOD at all.Had AVG anti virus - uninstalled it & had microsoft security essentials installed.
I can't install Huawei E173 under Windows 7 Ultimate 64-bit Service Pack 1. I get the following message:"UpravljaĨki program nije pronađen" in the screenshot means "Driver not found".I have also tried connecting the modem while connected to the Internet, to no avail.I had previously installed and used 3 other USB mobile broadband modems on the same system, 2 of which were Huawei. All software for these modems is supposed to be uninstalled.However, when I install it under a VMware virtual machine with a fresh install of the same operating system, everything works fine.I have also tried copying all relevant drivers successfully installed under the virtual machine to the physical machine, but that doesn't completely work, either.
I have a laptop with Windows 7 Home Premium 64 bit. It gives BSOD when I try to use Huawei data card. The error comes exactly when I click on "Connect" button. I have attached all the files.
I can't get my Huawei 169 modem to function in Windows 7, I've tried both build 6801 and 6956 -same result
As soon as I plug the modem in Windows 7 recognizes it as a usb disk, I can access the disk and launch the on board installer. I've downloaded the latest driver from the Huawei site, but the installer fails with the error "can't find any modem"
If I do a hardware scan in the device manager only the usb disk turns up, but not the modem.
I'm using this modem on this laptop in both WinXP and OSX without any problems, so the modem and PC is allright...
Is there any special windows 7 services that I need to start?
I use Huawei K3765 USB Dongle. I have unlocked it so that I can use other SIM cards with it. I also had to install Mobile Partner for it. But now I am getting an error in Mobile Partner saying, "the device has been disconnected or is unavailable".I can still connect to the internet through dial-up but to use 3G services I need Mobile Partner. Now here is a link where a solution is posted.[URL]... I would like to know whether uninstalling every driver under 'Universal Serial Bus Controllers' is safe or not.
The laptop came preinstalled with Vista Home 64bit and i was able to use the mobile broadband without any issues.
I have installed Windows 7 Pro 64 in a dual boot config and it runs fine on wired or wireless connections, but when i try to use the mobile broadband i run into issues.
After the modem driver and software install and a few restarts I was able to get all the devices in the device manager to be happy, and i was able to connect via the 3 Connect software and access the internet. But after a few minutes Windows will inevitably lock up, regardless of what program is being used. The screen will freeze, there will be zero harddrive activity and the only course of action is to hold down the power button
The mobile broadbands company site says that the vista drivers should be happy on windows 7, but something isnt happy.
I really need to resolve this as my mobile broadband allows me to connect to various servers for work via its allowed IP address.
Is this the modem, the USB bus or something else?
I have checked the event log and there isnt anything useful in there.
I have a problem with Huawei E630 wireless modem. Afert pluging in - PCMCIA type II card - it's starting to install but afert couple seconds it gives BSOD with IRQL_NOT_LESS_OR_EQUAL.
Also, becouse I think it might come handy, card was working well on XP or Vista 32bit.
Oh, and something else, after pluging it install a NEC USB controller - showed in Device Manager - and secondary a Modem.
Installing Huawei modem Driver of PTCL V Wireless on windows 7. In this article you will find how to install huawei modem (ETS2558) drivers of previous version windows (XP) on windows 7.
Other user (other modem brand) of PTCL V or windows XP service pack 3 and vista user may get help from there to install their drivers.
As we know that win 7 has great support for previous windows applications so software make no problem only driver create a problem.
To install the driver follow these steps.
1- Insert CD into CD/ DVD ROM.
2- Cancel auto run of huawei application.
3- Go to start Menu in search bar type "Troubleshooting" and open it from menu.
4- Now click on programs and follow the instruction (Run application in Win XP service pack 2 compatibility mode and follow procedure same as XP).
Select not listed….
Select Location of application….
Click on "Try recommended settings"
Now click on start the Program…
5-After installizations save compatibility settings. (Windows may warn u that it is not compatible just ignore it).
6-Now go to the Device manager here you will see TUSB3410 DEVICE IN Multiport serial adapters which will be marked with some sign Right click on it and then click on update driver. Now click on brows files from computer and select CD/ DVD ROM in which driver is found. It will scan the CD/ DVD ROM n find and install drivers automatically.
7-Refresh the list of device manager or re-open it. U will see that USB-Serial Port (COM 3) in Ports (COM & LPT) will be marked with sign. Now perform same procedure as in step 6 with it.
Now you are ready to use your application.
Now open application ptcl v and click on connect it may take 1 to 2 minutes by displaying a message initializing.
A friend asked me to setup her new Windows 7 Home Premium machine and her old Dell Dimension 4700 with windows xp. She bought a Belkin FLIP USB with audio to accomplish this somewhat, however the windows 7 pc seems to be causing issues as far as i can tell. At random times the keyboard will not switch during a flip but you can flip again and it corrects.
It also would sometimes get the KB/mouse on one computer and the monitor on the other, which was not fixable by her. The only solution being to fully unplug the KVM and let it power down for a few seconds and then rehook it up to the running PCs. She's not really prepared to do that for a KVM that should be simple.
Belkin's website does not claim compatibility with Windows 7 or 64bit, so can anyone recommend a KVM that has "fully" compatible drivers for Windows 7 64bit? The belkin flip will generally work with a little troubleshooting despite it not being supported on win7 64, but she doesn't want to do "any troubleshooting" and just wants it to work all the time.
My mom just got a new computer with Windows 7 - 64 bit operating system. She can't download Copmuserve Dialer software. Some Capatability issue with the 7.0 version on CD
I am having problem with my D-link router and new notebook which installed windows7.I am using the windows7 64bit. When i connect my notebook to my router in both wire and wireless way, my router will automatically restart itself!my router is a D-link router model DI-624.....I have checked on the Windows7 Compatibility Center.....yea...unfortunately.... it said my router is not compatible with........but i just wonder how can my client PC OS will affect my router working?I have asked in many other computing forum, those guys told so, OS won't affect router, and won't uncompatible......
I'm currently using Windows XP and making a lot of use of MS Works Version 8.0 (2004)for various databases and also printing labels from these databases. Is this MS Works program compatible with Windows 7 (and 8)if and when I decide to buy a new machine? Same question for MS Money Version 14.0 120 1105 (2004). I also have a brilliant but ancient (1988 vintage, updated for Windows) MS-DOS "Masterfile" database by Campbell Systems (later taken over by Tower) which still works on XP - what about Windows 7 and 8?
I have Windows 7 (64bit) and IE 9 brower installed. I'm looking to acquire iPhone 4G S. Apple wants to install Safari as browser. Does this replace my IE, or can I have both co-exist? Must I do this to have full range of services on iPhone? What are the gotchas with this?
I would like to ask if anybody here can tell me if my Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz CPU is compatible with Windows 7. I've tried to register to the Intel community forums to ask there, but it's impossible, Maybe only to programmers/developers.
Just installed Nero9 Essentials on Win7. I use Nero primarily for editing and burning vinyl records (recorderd via LP recorder)but can not find the recording via ADD in Nero to edit and burn. Selecting and burning DATA disc is OK but not MUSIC files.Does NERO9 lack something? Is there a fix? Is NERO 10 the way to go for WIN7?
I am a hobbyist, I plan to upgrade the OS of my music production desktop from Windows XP SP2 to Windows 7, would the current Audigy 2ZS soundcard be compatible with the new OS?
I am using Windows 7 Professional - Since I went to ie 9 when I switch from one internet site to another I get consistently "ie unable to open this tab" and then a few seconds later I can access it. I tried to go back to IE8 but its no longer on the computer.
I am using Windows 7 Professional - Since I went to ie 9 when I switch from one internet site to another I get consistently "ie unable to open this tab" and then a few seconds later I can access it. I tried to go back to IE8 but its no longer on the computer.
One of our Microsoft Student Partner assignments was to create a video highlighting some of the features of Windows 7. I chose to do mine on using the Program Compatibility Wizard. I am not much of a video maker, but it explains the process pretty well.Other Windows 7 tips and tricks.
I am having to do a clean install of Windows 7 Ultimate and would like to implement RAID 1 for data duplication afterwards. My CompTIA A+ textbook says RAID 1 is supported only by server OSs such as Windows Server 2003 and I wonder if Windows 7 Ultimate would support RAID 1. I am looking forward to receiving any advice.
i was installing Microsoft Home and Student 2007 on my son's new laptop (hp pavillion dv6) which is running windows 7 64 bit. I got the error "Error 1704 an installation for microsoft.net framework 4 client profile is currently suspended. You must undo those changes made by that installation before continuing." I don't know what that means. Should I undo or just cancel?